Home
last modified time | relevance | path

Searched +full:610 +full:us (Results 1 – 25 of 27) sorted by relevance

12

/openbmc/linux/Documentation/devicetree/bindings/regulator/
H A Dmps,mpq7920.yaml59 corresponding values 150us, 300us, 610us, 920us
/openbmc/linux/drivers/usb/misc/
H A Donboard_usb_hub.h10 unsigned long reset_us; /* reset pulse width in us */
65 { .compatible = "usb5e3,610", .data = &genesys_gl852g_data, },
/openbmc/linux/arch/arm64/boot/dts/qcom/
H A Dsdm670.dtsi39 capacity-dmips-mhz = <610>;
66 capacity-dmips-mhz = <610>;
88 capacity-dmips-mhz = <610>;
110 capacity-dmips-mhz = <610>;
132 capacity-dmips-mhz = <610>;
154 capacity-dmips-mhz = <610>;
258 entry-latency-us = <702>;
259 exit-latency-us = <915>;
260 min-residency-us = <1617>;
268 entry-latency-us = <526>;
[all …]
/openbmc/linux/drivers/media/rc/
H A Dnuvoton-cir.h131 /* select sample period as 50us */
318 * 43ms / 50us (sample period) * 0.85 (inaccuracy)
323 * 26ms / 50us (sample period) * 0.85 (inaccuracy)
326 #define KEYBOARD_BUF_LEN_MIN 610
329 * 24ms / 50us (sample period) * 0.85 (inaccuracy)
/openbmc/linux/arch/arm64/boot/dts/freescale/
H A Dimx8mp-debix-som-a-bmb-08.dts31 startup-delay-us = <50000>;
32 off-on-delay-us = <110000>;
117 reset-assert-us = <20000>;
118 reset-deassert-us = <150000>;
144 reset-assert-us = <20000>;
145 reset-deassert-us = <150000>;
280 compatible = "usb5e3,610";
/openbmc/linux/arch/arm/boot/dts/amlogic/
H A Dmeson8b-odroidc1.dts221 reset-assert-us = <10000>;
222 reset-deassert-us = <80000>;
378 compatible = "usb5e3,610";
/openbmc/linux/drivers/phy/cadence/
H A Dphy-cadence-salvo.c113 * Gate how many us for the txvalid signal until analog
117 /* 0us, txvalid is ready just after HS/FS transmitters have powered up */
350 if (val < 610) in cdns_salvo_phy_probe()
/openbmc/linux/arch/arm64/boot/dts/amlogic/
H A Dmeson-gxbb-odroidc2.dts241 reset-assert-us = <10000>;
242 reset-deassert-us = <80000>;
408 compatible = "usb5e3,610";
/openbmc/linux/arch/arm64/boot/dts/rockchip/
H A Drk3399-eaidk-610.dts14 model = "OPEN AI LAB EAIDK-610";
15 compatible = "openailab,eaidk-610", "rockchip,rk3399";
284 snps,reset-delays-us = <0 10000 50000>;
/openbmc/linux/drivers/staging/vme_user/
H A Dvme_tsi148.h506 * offset 10 610 - Mailbox0
701 #define TSI148_LCSR_VMCTRL_ATO_32 (0<<16) /* 32 us */
702 #define TSI148_LCSR_VMCTRL_ATO_128 BIT(16) /* 128 us */
703 #define TSI148_LCSR_VMCTRL_ATO_512 (2<<16) /* 512 us */
711 #define TSI148_LCSR_VMCTRL_VTOFF_0 (0<<12) /* 0us */
712 #define TSI148_LCSR_VMCTRL_VTOFF_1 BIT(12) /* 1us */
713 #define TSI148_LCSR_VMCTRL_VTOFF_2 (2<<12) /* 2us */
714 #define TSI148_LCSR_VMCTRL_VTOFF_4 (3<<12) /* 4us */
715 #define TSI148_LCSR_VMCTRL_VTOFF_8 (4<<12) /* 8us */
716 #define TSI148_LCSR_VMCTRL_VTOFF_16 (5<<12) /* 16us */
[all …]
/openbmc/linux/drivers/gpu/drm/msm/adreno/
H A Dadreno_gpu.h321 return adreno_is_revn(gpu, 610); in adreno_is_a610()
550 * as performance counters) this allows us to protect a much larger range with a
H A Dadreno_device.c273 .revn = 610,
802 * suspend isn't racing with scheduler kthread feeding us in suspend_scheduler()
/openbmc/linux/arch/m68k/mac/
H A Dconfig.c366 * confuse us. The 840AV has a SCSI location of its own (same as
390 .name = "Quadra 610",
568 .name = "Centris 610",
/openbmc/linux/arch/x86/kernel/acpi/
H A Dboot.c237 * counting disabled CPUs. This allows us to size in acpi_parse_x2apic()
278 * counting disabled CPUs. This allows us to size in acpi_parse_lapic()
1350 * Dell Precision Workstation 410, 610 come here. in early_acpi_process_madt()
1395 * Dell Precision Workstation 410, 610 come here. in acpi_process_madt()
/openbmc/linux/drivers/thermal/
H A Drockchip_thermal.c225 #define TSADCV5_USER_INTER_PD_SOC 0xfc0 /* 97us, at least 90us */
299 {610, 110000},
745 usleep_range(15, 100); /* The spec note says at least 15 us */ in rk_tsadcv3_initialize()
748 usleep_range(90, 200); /* The spec note says at least 90 us */ in rk_tsadcv3_initialize()
802 * than 10us between the rising edge of tsadc_tsen_en in rk_tsadcv7_initialize()
812 * than 90us after the rising edge of tsadc_ana_reg_0/1/2. in rk_tsadcv7_initialize()
/openbmc/linux/Documentation/admin-guide/media/
H A Dbttv.rst458 Many thanks to Matrix-Vision for giving us 2 cards for free which made
755 - WinView 610 (Zoran)
762 Author of this section: Jon Tombs <jon@gte.esi.us.es>
877 M108-B Bt848 -- FR1236 US [#f2]_, [#f3]_
888 - US site has different drivers for (as of 09/2002):
1259 US models
1729 - MATRIX Vision for giving us 2 cards for free, which made support of
/openbmc/linux/arch/arm64/boot/dts/renesas/
H A Dr8a774e1.dtsi261 entry-latency-us = <400>;
262 exit-latency-us = <500>;
263 min-residency-us = <4000>;
270 entry-latency-us = <700>;
271 exit-latency-us = <700>;
272 min-residency-us = <5000>;
2687 clocks = <&cpg CPG_MOD 610>;
2689 resets = <&cpg 610>;
H A Dr8a77951.dtsi276 entry-latency-us = <400>;
277 exit-latency-us = <500>;
278 min-residency-us = <4000>;
285 entry-latency-us = <700>;
286 exit-latency-us = <700>;
287 min-residency-us = <5000>;
3050 clocks = <&cpg CPG_MOD 610>;
3052 resets = <&cpg 610>;
H A Dr8a779g0.dtsi143 entry-latency-us = <400>;
144 exit-latency-us = <500>;
145 min-residency-us = <4000>;
551 interrupts = <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>;
/openbmc/linux/drivers/media/platform/marvell/
H A Dmcam-core.c180 * The two-word DMA descriptor format used by the Armada 610 and like. There
631 * The list-empty condition can hit us at resume time in mcam_ctlr_dma_sg()
1155 * give them to us until *after* streaming starts. But in mcam_vb_start_streaming()
1158 * give us buffers soon. in mcam_vb_start_streaming()
1186 /* They never gave us buffers */ in mcam_vb_stop_streaming()
1424 * The V4l2 spec wants us to be smarter, and actually get this from
/openbmc/linux/sound/soc/codecs/
H A Dtlv320aic31xx.c292 "0us", "15.3us", "153us", "1.53ms", "15.3ms", "76.2ms",
293 "153ms", "304ms", "610ms", "1.22s", "3.04s", "6.1s" };
398 "%s: Failed! 0x%x was 0x%x expected 0x%x (%d, 0x%x, %d us)\n", in aic31xx_wait_bits()
/openbmc/openbmc/poky/meta/files/
H A Dspdx-licenses.json1495 "detailsUrl": "https://spdx.org/licenses/CC-BY-3.0-US.json",
1498 "licenseId": "CC-BY-3.0-US",
1500 "reference": "https://spdx.org/licenses/CC-BY-3.0-US.html",
1503 "https://creativecommons.org/licenses/by/3.0/us/legalcode"
2120 "http://www.cecill.info/licences/Licence_CeCILL_V1.1-US.html"
3905 "detailsUrl": "https://spdx.org/licenses/HPND-export-US.json",
3908 "licenseId": "HPND-export-US",
3909 "name": "HPND with US Government export control warning",
3910 "reference": "https://spdx.org/licenses/HPND-export-US.html",
3917 "detailsUrl": "https://spdx.org/licenses/HPND-export-US-acknowledgement.json",
[all …]
/openbmc/linux/drivers/media/dvb-frontends/
H A Ddib8000.c303 …(664 << 5) | 0x0c, (925 << 5) | 0x03, (937 << 5) | 0x10, (664 << 5) | 0x0c, (-610 << 5) | 0x0a, (6…
304 (-610 << 5) | 0x0a
3024 int ret = 1; /* 1 symbol duration (in 100us unit) delay most of the time */ in dib8000_tune()
4203 dprintk("Next all layers stats available in %u us.\n", time_us); in dib8000_get_stats()
4232 dprintk("Next layer %c stats will be available in %u us\n", in dib8000_get_stats()
/openbmc/openbmc/meta-openembedded/meta-python/recipes-devtools/python/python3-click-spinner/
H A D0001-Update-Versioneer-to-0.22.patch236 + # refs/heads/ and refs/tags/ prefixes that would let us distinguish
1370 @@ -610,18 +570,21 @@ def git_get_keywords(versionfile_abs):
/openbmc/linux/drivers/net/wireless/realtek/rtw88/
H A Drtw8822c.c1926 #define WLAN_TBTT_PROHIBIT 0x04 /* unit : 32us */
1927 #define WLAN_TBTT_HOLD_TIME 0x064 /* unit : 32us */
3295 usleep_range(600, 610); in rtw8822c_dpk_rxbb_dc_cal()

12