/openbmc/linux/drivers/accel/habanalabs/include/gaudi2/asic_reg/ |
H A D | gaudi2_blocks_linux_driver.h | 16 #define mmDCORE0_TPC0_ROM_TABLE_BASE 0x0ull 17 #define DCORE0_TPC0_ROM_TABLE_MAX_OFFSET 0x1000 18 #define DCORE0_TPC0_ROM_TABLE_SECTION 0x1000 19 #define mmDCORE0_TPC0_EML_SPMU_BASE 0x1000ull 20 #define DCORE0_TPC0_EML_SPMU_MAX_OFFSET 0x1000 21 #define DCORE0_TPC0_EML_SPMU_SECTION 0x1000 22 #define mmDCORE0_TPC0_EML_ETF_BASE 0x2000ull 23 #define DCORE0_TPC0_EML_ETF_MAX_OFFSET 0x1000 24 #define DCORE0_TPC0_EML_ETF_SECTION 0x1000 25 #define mmDCORE0_TPC0_EML_STM_BASE 0x3000ull [all …]
|
/openbmc/linux/drivers/net/dsa/mv88e6xxx/ |
H A D | global2.h | 16 /* Offset 0x00: Interrupt Source Register */ 17 #define MV88E6XXX_G2_INT_SRC 0x00 18 #define MV88E6XXX_G2_INT_SRC_WDOG 0x8000 19 #define MV88E6XXX_G2_INT_SRC_JAM_LIMIT 0x4000 20 #define MV88E6XXX_G2_INT_SRC_DUPLEX_MISMATCH 0x2000 21 #define MV88E6XXX_G2_INT_SRC_WAKE_EVENT 0x1000 22 #define MV88E6352_G2_INT_SRC_SERDES 0x0800 23 #define MV88E6352_G2_INT_SRC_PHY 0x001f 24 #define MV88E6390_G2_INT_SRC_PHY 0x07fe 28 /* Offset 0x01: Interrupt Mask Register */ [all …]
|
/openbmc/linux/arch/arm64/boot/dts/ti/ |
H A D | k3-am62a7.dtsi | 17 #size-cells = <0>; 39 cpu0: cpu@0 { 41 reg = <0x000>; 44 i-cache-size = <0x8000>; 47 d-cache-size = <0x8000>; 55 reg = <0x001>; 58 i-cache-size = <0x8000>; 61 d-cache-size = <0x8000>; 69 reg = <0x002>; 72 i-cache-size = <0x8000>; [all …]
|
H A D | k3-am62p5.dtsi | 16 #size-cells = <0>; 38 cpu0: cpu@0 { 40 reg = <0x000>; 43 i-cache-size = <0x8000>; 46 d-cache-size = <0x8000>; 50 clocks = <&k3_clks 135 0>; 55 reg = <0x001>; 58 i-cache-size = <0x8000>; 61 d-cache-size = <0x8000>; 65 clocks = <&k3_clks 136 0>; [all …]
|
H A D | k3-am654.dtsi | 13 #size-cells = <0>; 36 cpu0: cpu@0 { 38 reg = <0x000>; 41 i-cache-size = <0x8000>; 44 d-cache-size = <0x8000>; 52 reg = <0x001>; 55 i-cache-size = <0x8000>; 58 d-cache-size = <0x8000>; 66 reg = <0x100>; 69 i-cache-size = <0x8000>; [all …]
|
H A D | k3-am625.dtsi | 17 #size-cells = <0>; 39 cpu0: cpu@0 { 41 reg = <0x000>; 44 i-cache-size = <0x8000>; 47 d-cache-size = <0x8000>; 52 clocks = <&k3_clks 135 0>; 57 reg = <0x001>; 60 i-cache-size = <0x8000>; 63 d-cache-size = <0x8000>; 68 clocks = <&k3_clks 136 0>; [all …]
|
/openbmc/linux/arch/arm64/boot/dts/arm/ |
H A D | fvp-base-revc.dts | 15 /memreserve/ 0x80000000 0x00010000; 43 #size-cells = <0>; 45 cpu0: cpu@0 { 48 reg = <0x0 0x000>; 50 i-cache-size = <0x8000>; 53 d-cache-size = <0x8000>; 61 reg = <0x0 0x100>; 63 i-cache-size = <0x8000>; 66 d-cache-size = <0x8000>; 74 reg = <0x0 0x200>; [all …]
|
H A D | juno-r2.dts | 38 #size-cells = <0>; 69 CPU_SLEEP_0: cpu-sleep-0 { 71 arm,psci-suspend-param = <0x0010000>; 78 CLUSTER_SLEEP_0: cluster-sleep-0 { 80 arm,psci-suspend-param = <0x1010000>; 88 A72_0: cpu@0 { 90 reg = <0x0 0x0>; 93 i-cache-size = <0xc000>; 96 d-cache-size = <0x8000>; 100 clocks = <&scpi_dvfs 0>; [all …]
|
H A D | juno-r1.dts | 38 #size-cells = <0>; 69 CPU_SLEEP_0: cpu-sleep-0 { 71 arm,psci-suspend-param = <0x0010000>; 78 CLUSTER_SLEEP_0: cluster-sleep-0 { 80 arm,psci-suspend-param = <0x1010000>; 88 A57_0: cpu@0 { 90 reg = <0x0 0x0>; 93 i-cache-size = <0xc000>; 96 d-cache-size = <0x8000>; 100 clocks = <&scpi_dvfs 0>; [all …]
|
H A D | juno.dts | 37 #size-cells = <0>; 68 CPU_SLEEP_0: cpu-sleep-0 { 70 arm,psci-suspend-param = <0x0010000>; 77 CLUSTER_SLEEP_0: cluster-sleep-0 { 79 arm,psci-suspend-param = <0x1010000>; 87 A57_0: cpu@0 { 89 reg = <0x0 0x0>; 92 i-cache-size = <0xc000>; 95 d-cache-size = <0x8000>; 99 clocks = <&scpi_dvfs 0>; [all …]
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | k3-am654.dtsi | 13 #size-cells = <0>; 36 cpu0: cpu@0 { 38 reg = <0x000>; 41 i-cache-size = <0x8000>; 44 d-cache-size = <0x8000>; 52 reg = <0x001>; 55 i-cache-size = <0x8000>; 58 d-cache-size = <0x8000>; 66 reg = <0x100>; 69 i-cache-size = <0x8000>; [all …]
|
/openbmc/linux/drivers/accel/habanalabs/include/gaudi/asic_reg/ |
H A D | gaudi_blocks.h | 16 #define mmNIC0_PHY0_BASE 0x0ull 17 #define NIC0_PHY0_MAX_OFFSET 0x9F13 18 #define mmMME0_ACC_BASE 0x7FFC020000ull 19 #define MME0_ACC_MAX_OFFSET 0x5C00 20 #define MME0_ACC_SECTION 0x20000 21 #define mmMME0_SBAB_BASE 0x7FFC040000ull 22 #define MME0_SBAB_MAX_OFFSET 0x5800 23 #define MME0_SBAB_SECTION 0x1000 24 #define mmMME0_PRTN_BASE 0x7FFC041000ull 25 #define MME0_PRTN_MAX_OFFSET 0x5000 [all …]
|
/openbmc/linux/arch/arm64/boot/dts/amazon/ |
H A D | alpine-v3.dtsi | 21 #size-cells = <0>; 23 cpu@0 { 26 reg = <0x0>; 28 d-cache-size = <0x8000>; 31 i-cache-size = <0xc000>; 40 reg = <0x1>; 42 d-cache-size = <0x8000>; 45 i-cache-size = <0xc000>; 54 reg = <0x2>; 56 d-cache-size = <0x8000>; [all …]
|
/openbmc/u-boot/arch/arm/cpu/arm926ejs/mxs/ |
H A D | mxsimage.mx28.cfg | 2 SECTION 0x0 BOOTABLE 4 LOAD 0x1000 spl/u-boot-spl.bin 5 LOAD IVT 0x8000 0x1000 6 CALL HAB 0x8000 0x0 7 LOAD 0x40002000 u-boot.bin 8 LOAD IVT 0x8000 0x40002000 9 CALL HAB 0x8000 0x0
|
H A D | u-boot-imx28.bd | 6 section (0) { 7 load u_boot_spl > 0x0000; 8 load ivt (entry = 0x0014) > 0x8000; 9 hab call 0x8000; 11 load u_boot > 0x40000100; 12 load ivt (entry = 0x40000100) > 0x8000; 13 hab call 0x8000;
|
/openbmc/linux/Documentation/devicetree/bindings/pci/ |
H A D | pci-msi.txt | 13 * Bits [2:0] are the Function number. 67 reg = <0xa 0x1>; 74 reg = <0xf 0x1>; 82 msi-map = <0x0 &msi_a 0x0 0x10000>, 95 reg = <0xa 0x1>; 102 reg = <0xf 0x1>; 110 msi-map = <0x0 &msi_a 0x0 0x100>, 111 msi-map-mask = <0xff> 124 reg = <0xa 0x1>; 131 reg = <0xf 0x1>; [all …]
|
H A D | pci-iommu.txt | 13 * Bits [2:0] are the Function number. 56 reg = <0xa 0x1>; 62 reg = <0xf 0x1>; 70 iommu-map = <0x0 &iommu 0x0 0x10000>; 83 reg = <0xa 0x1>; 89 reg = <0xf 0x1>; 97 iommu-map = <0x0 &iommu 0x0 0x10000>; 98 iommu-map-mask = <0xfff8>; 111 reg = <0xa 0x1>; 117 reg = <0xf 0x1>; [all …]
|
/openbmc/linux/include/linux/mfd/wm8350/ |
H A D | core.h | 27 #define WM8350_RESET_ID 0x00 28 #define WM8350_ID 0x01 29 #define WM8350_REVISION 0x02 30 #define WM8350_SYSTEM_CONTROL_1 0x03 31 #define WM8350_SYSTEM_CONTROL_2 0x04 32 #define WM8350_SYSTEM_HIBERNATE 0x05 33 #define WM8350_INTERFACE_CONTROL 0x06 34 #define WM8350_POWER_MGMT_1 0x08 35 #define WM8350_POWER_MGMT_2 0x09 36 #define WM8350_POWER_MGMT_3 0x0A [all …]
|
/openbmc/qemu/tests/qemu-iotests/ |
H A D | 046 | 25 seq=`basename $0` 34 trap "_cleanup; exit \$status" 0 1 2 3 15 60 local pattern=0 61 local cur_sec=0 63 for ((i=0;i<=$((sectors - 1));i++)); do 71 backing_io 0 32 write | $QEMU_IO "$TEST_IMG" | _filter_qemu_io 84 aio_write -P 10 0x18000 0x2000 87 aio_write -P 11 0x12000 0x2000 88 aio_write -P 12 0x1c000 0x2000 98 aio_write -P 20 0x28000 0x2000 [all …]
|
/openbmc/linux/include/linux/mfd/wm831x/ |
H A D | pmu.h | 14 * R16387 (0x4003) - Power State 16 #define WM831X_CHIP_ON 0x8000 /* CHIP_ON */ 17 #define WM831X_CHIP_ON_MASK 0x8000 /* CHIP_ON */ 20 #define WM831X_CHIP_SLP 0x4000 /* CHIP_SLP */ 21 #define WM831X_CHIP_SLP_MASK 0x4000 /* CHIP_SLP */ 24 #define WM831X_REF_LP 0x1000 /* REF_LP */ 25 #define WM831X_REF_LP_MASK 0x1000 /* REF_LP */ 28 #define WM831X_PWRSTATE_DLY_MASK 0x0C00 /* PWRSTATE_DLY - [11:10] */ 31 #define WM831X_SWRST_DLY 0x0200 /* SWRST_DLY */ 32 #define WM831X_SWRST_DLY_MASK 0x0200 /* SWRST_DLY */ [all …]
|
/openbmc/linux/arch/arm/boot/dts/broadcom/ |
H A D | bcm2837.dtsi | 8 ranges = <0x7e000000 0x3f000000 0x1000000>, 9 <0x40000000 0x40000000 0x00001000>; 10 dma-ranges = <0xc0000000 0x00000000 0x3f000000>; 14 reg = <0x40000000 0x100>; 30 interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI 39 #size-cells = <0>; 49 cpu0: cpu@0 { 52 reg = <0>; 54 cpu-release-addr = <0x0 0x000000d8>; 55 d-cache-size = <0x8000>; [all …]
|
H A D | bcm2836.dtsi | 9 ranges = <0x7e000000 0x3f000000 0x1000000>, 10 <0x40000000 0x40000000 0x00001000>; 11 dma-ranges = <0xc0000000 0x00000000 0x3f000000>; 15 reg = <0x40000000 0x100>; 31 interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI 40 #size-cells = <0>; 51 v7_cpu0: cpu@0 { 54 reg = <0xf00>; 56 d-cache-size = <0x8000>; 59 i-cache-size = <0x8000>; [all …]
|
/openbmc/u-boot/board/gdsys/common/ |
H A D | phy.c | 30 { MIICMD_SET, 22, 0x0000 }, 31 { MIICMD_VERIFY_VALUE, 2, 0x0141, 0xffff }, 32 { MIICMD_VERIFY_VALUE, 3, 0x0dd0, 0xfff0 }, 39 { MIICMD_SET, 22, 0x00ff }, 40 { MIICMD_SET, 17, 0x214b }, 41 { MIICMD_SET, 16, 0x2144 }, 42 { MIICMD_SET, 17, 0x0c28 }, 43 { MIICMD_SET, 16, 0x2146 }, 44 { MIICMD_SET, 17, 0xb233 }, 45 { MIICMD_SET, 16, 0x214d }, [all …]
|
/openbmc/linux/arch/arm64/boot/dts/amd/ |
H A D | amd-seattle-cpus.dtsi | 5 #address-cells = <0x1>; 6 #size-cells = <0x0>; 43 CPU0: cpu@0 { 46 reg = <0x0>; 49 i-cache-size = <0xC000>; 52 d-cache-size = <0x8000>; 62 reg = <0x1>; 65 i-cache-size = <0xC000>; 68 d-cache-size = <0x8000>; 77 reg = <0x100>; [all …]
|
/openbmc/linux/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/ |
H A D | tracepoints.rst | 36 …tc-6546 [010] ...1 2679.704889: mlx5e_stats_flower: cookie=0000000060eb3d6a bytes=0 packets=0 la… 59 …: mlx5_esw_bridge_fdb_entry_init: net_device=enp8s0f0_0 addr=e4:fd:05:08:00:02 vid=0 flags=0 used=0 66 …x5_esw_bridge_fdb_entry_cleanup: net_device=enp8s0f0_1 addr=e4:fd:05:08:00:03 vid=0 flags=0 used=16 74 …lx5_esw_bridge_fdb_entry_refresh: net_device=enp8s0f0_0 addr=e4:fd:05:08:00:02 vid=3 flags=0 used=0 115 … mlx5_esw_vport_qos_create: (0000:82:00.0) vport=2 tsar_ix=4 bw_share=0, max_rate=0 group=00000000… 159 …..... 24610.188722: mlx5_sf_add: (0000:06:00.0) port_index=32768 controller=0 hw_id=0x8000 sfnum=88 166 … [038] ..... 26300.404749: mlx5_sf_free: (0000:06:00.0) port_index=32768 controller=0 hw_id=0x8000 173 …08] ..... 3669.635095: mlx5_sf_activate: (0000:08:00.0) port_index=32768 controller=0 hw_id=0x8000 180 …] ..... 4015.969467: mlx5_sf_deactivate: (0000:08:00.0) port_index=32768 controller=0 hw_id=0x8000 187 …5 [031] ..... 26296.385259: mlx5_sf_hwc_alloc: (0000:06:00.0) controller=0 hw_id=0x8000 sfnum=88 [all …]
|