/openbmc/u-boot/drivers/pinctrl/aspeed/ |
H A D | pinctrl_ast2600.c | 29 int ret = 0; in ast2600_pinctrl_probe() 45 return 0; in ast2600_pinctrl_probe() 49 { 0x418, GENMASK(9, 8), 1 }, 50 { 0x4B8, GENMASK(9, 8), 0 }, 54 { 0x418, GENMASK(11, 10), 1 }, 55 { 0x4B8, GENMASK(11, 10), 0 }, 59 { 0x418, GENMASK(13, 12), 1 }, 60 { 0x4B8, GENMASK(13, 12), 0 }, 64 { 0x418, GENMASK(15, 14), 1 }, 65 { 0x4B8, GENMASK(15, 14), 0 }, [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/serial/ |
H A D | st,stm32-uart.yaml | 115 reg = <0x40011000 0x400>; 117 clocks = <&rcc 0 164>; 118 dmas = <&dma2 2 4 0x414 0x0>, 119 <&dma2 7 4 0x414 0x0>;
|
/openbmc/linux/arch/arm/mach-omap2/ |
H A D | omap-wakeupgen.h | 12 #define OMAP_WKUPGEN_BASE 0x48281000 14 #define OMAP_WKG_CONTROL_0 0x00 15 #define OMAP_WKG_ENB_A_0 0x10 16 #define OMAP_WKG_ENB_B_0 0x14 17 #define OMAP_WKG_ENB_C_0 0x18 18 #define OMAP_WKG_ENB_D_0 0x1c 19 #define OMAP_WKG_ENB_E_0 0x20 20 #define OMAP_WKG_ENB_A_1 0x410 21 #define OMAP_WKG_ENB_B_1 0x414 22 #define OMAP_WKG_ENB_C_1 0x418 [all …]
|
/openbmc/linux/drivers/usb/musb/ |
H A D | omap2430.h | 15 #define OTG_REVISION 0x400 17 #define OTG_SYSCONFIG 0x404 19 # define FORCESTDBY (0 << MIDLEMODE) 24 # define FORCEIDLE (0 << SIDLEMODE) 30 # define AUTOIDLE (1 << 0) 32 #define OTG_SYSSTATUS 0x408 33 # define RESETDONE (1 << 0) 35 #define OTG_INTERFSEL 0x40c 37 # define PHYSEL 0 /* bit position */ 38 # define UTMI_8BIT (0 << PHYSEL) [all …]
|
/openbmc/u-boot/drivers/usb/musb-new/ |
H A D | omap2430.h | 19 #define OTG_REVISION 0x400 21 #define OTG_SYSCONFIG 0x404 23 # define FORCESTDBY (0 << MIDLEMODE) 28 # define FORCEIDLE (0 << SIDLEMODE) 34 # define AUTOIDLE (1 << 0) 36 #define OTG_SYSSTATUS 0x408 37 # define RESETDONE (1 << 0) 39 #define OTG_INTERFSEL 0x40c 41 # define PHYSEL 0 /* bit position */ 42 # define UTMI_8BIT (0 << PHYSEL) [all …]
|
/openbmc/linux/drivers/gpu/drm/msm/disp/dpu1/ |
H A D | dpu_hwio.h | 13 #define DISP_INTF_SEL 0x004 14 #define INTR_EN 0x010 15 #define INTR_STATUS 0x014 16 #define INTR_CLEAR 0x018 17 #define INTR2_EN 0x008 18 #define INTR2_STATUS 0x00c 19 #define SSPP_SPARE 0x028 20 #define INTR2_CLEAR 0x02c 21 #define HIST_INTR_EN 0x01c 22 #define HIST_INTR_STATUS 0x020 [all …]
|
/openbmc/u-boot/arch/arm/include/asm/arch-s32v234/ |
H A D | mmdc.h | 9 #define MMDC0 0 12 #define MMDC_MDCTL 0x0 13 #define MMDC_MDPDC 0x4 14 #define MMDC_MDOTC 0x8 15 #define MMDC_MDCFG0 0xC 16 #define MMDC_MDCFG1 0x10 17 #define MMDC_MDCFG2 0x14 18 #define MMDC_MDMISC 0x18 19 #define MMDC_MDSCR 0x1C 20 #define MMDC_MDREF 0x20 [all …]
|
/openbmc/linux/sound/soc/sof/amd/ |
H A D | acp-dsp-offset.h | 15 #define ACP_DMA_CNTL_0 0x00 16 #define ACP_DMA_DSCR_STRT_IDX_0 0x20 17 #define ACP_DMA_DSCR_CNT_0 0x40 18 #define ACP_DMA_PRIO_0 0x60 19 #define ACP_DMA_CUR_DSCR_0 0x80 20 #define ACP_DMA_ERR_STS_0 0xC0 21 #define ACP_DMA_DESC_BASE_ADDR 0xE0 22 #define ACP_DMA_DESC_MAX_NUM_DSCR 0xE4 23 #define ACP_DMA_CH_STS 0xE8 24 #define ACP_DMA_CH_GROUP 0xEC [all …]
|
/openbmc/linux/sound/soc/tegra/ |
H A D | tegra210_mixer.h | 13 #define TEGRA210_MIXER_RX1_SOFT_RESET 0x04 14 #define TEGRA210_MIXER_RX1_STATUS 0x10 15 #define TEGRA210_MIXER_RX1_CIF_CTRL 0x24 16 #define TEGRA210_MIXER_RX1_CTRL 0x28 17 #define TEGRA210_MIXER_RX1_PEAK_CTRL 0x2c 18 #define TEGRA210_MIXER_RX1_SAMPLE_COUNT 0x30 21 #define TEGRA210_MIXER_TX1_ENABLE 0x280 22 #define TEGRA210_MIXER_TX1_SOFT_RESET 0x284 23 #define TEGRA210_MIXER_TX1_STATUS 0x290 24 #define TEGRA210_MIXER_TX1_INT_STATUS 0x294 [all …]
|
/openbmc/linux/arch/arm64/boot/dts/freescale/ |
H A D | imx8mp-pinfunc.h | 13 #define MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x014 0x274 0x000 0x0 0x0 14 #define MX8MP_IOMUXC_GPIO1_IO00__CCM_ENET_PHY_REF_CLK_ROOT 0x014 0x274 0x000 0x1 0x0 15 #define MX8MP_IOMUXC_GPIO1_IO00__ISP_FL_TRIG_0 0x014 0x274 0x5D4 0x3 0x0 16 #define MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1 0x014 0x274 0x000 0x6 0x0 17 #define MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x018 0x278 0x000 0x0 0x0 18 #define MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT 0x018 0x278 0x000 0x1 0x0 19 #define MX8MP_IOMUXC_GPIO1_IO01__ISP_SHUTTER_TRIG_0 0x018 0x278 0x5DC 0x3 0x0 20 #define MX8MP_IOMUXC_GPIO1_IO01__CCM_EXT_CLK2 0x018 0x278 0x000 0x6 0x0 21 #define MX8MP_IOMUXC_GPIO1_IO02__GPIO1_IO02 0x01C 0x27C 0x000 0x0 0x0 22 #define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x01C 0x27C 0x000 0x1 0x0 [all …]
|
H A D | imx8mm-pinfunc.h | 14 #define MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0… 15 #define MX8MM_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x4C0 0x1 0… 16 #define MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0… 17 #define MX8MM_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0… 18 #define MX8MM_IOMUXC_GPIO1_IO00_SJC_FAIL 0x028 0x290 0x000 0x7 0… 19 #define MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x02C 0x294 0x000 0x0 0… 20 #define MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT 0x02C 0x294 0x000 0x1 0… 21 #define MX8MM_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M 0x02C 0x294 0x4BC 0x5 0… 22 #define MX8MM_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2 0x02C 0x294 0x000 0x6 0… 23 #define MX8MM_IOMUXC_GPIO1_IO01_SJC_ACTIVE 0x02C 0x294 0x000 0x7 0… [all …]
|
H A D | imx8mq-pinfunc.h | 15 #define MX8MQ_IOMUXC_PMIC_STBY_REQ_CCMSRCGPCMIX_PMIC_STBY_REQ 0x014 0x27C 0x000 0x0 0… 16 #define MX8MQ_IOMUXC_PMIC_ON_REQ_SNVSMIX_PMIC_ON_REQ 0x018 0x280 0x000 0x0 0… 17 #define MX8MQ_IOMUXC_ONOFF_SNVSMIX_ONOFF 0x01C 0x284 0x000 0x0 0… 18 #define MX8MQ_IOMUXC_POR_B_SNVSMIX_POR_B 0x020 0x288 0x000 0x0 0… 19 #define MX8MQ_IOMUXC_RTC_RESET_B_SNVSMIX_RTC_RESET_B 0x024 0x28C 0x000 0x0 0… 20 #define MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0… 21 #define MX8MQ_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x4C0 0x1 0… 22 #define MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0… 23 #define MX8MQ_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0… 24 #define MX8MQ_IOMUXC_GPIO1_IO00_SJC_FAIL 0x028 0x290 0x000 0x7 0… [all …]
|
/openbmc/linux/drivers/accel/habanalabs/include/goya/asic_reg/ |
H A D | pci_nrtr_regs.h | 22 #define mmPCI_NRTR_HBW_MAX_CRED 0x100 24 #define mmPCI_NRTR_LBW_MAX_CRED 0x120 26 #define mmPCI_NRTR_DBG_E_ARB 0x300 28 #define mmPCI_NRTR_DBG_W_ARB 0x304 30 #define mmPCI_NRTR_DBG_N_ARB 0x308 32 #define mmPCI_NRTR_DBG_S_ARB 0x30C 34 #define mmPCI_NRTR_DBG_L_ARB 0x310 36 #define mmPCI_NRTR_DBG_E_ARB_MAX 0x320 38 #define mmPCI_NRTR_DBG_W_ARB_MAX 0x324 40 #define mmPCI_NRTR_DBG_N_ARB_MAX 0x328 [all …]
|
/openbmc/u-boot/arch/m68k/include/asm/coldfire/ |
H A D | crossbar.h | 16 u32 prs1; /* 0x100 Priority Register Slave 1 */ 17 u32 res1[3]; /* 0x104 - 0F */ 18 u32 crs1; /* 0x110 Control Register Slave 1 */ 19 u32 res2[187]; /* 0x114 - 0x3FF */ 21 u32 prs4; /* 0x400 Priority Register Slave 4 */ 22 u32 res3[3]; /* 0x404 - 0F */ 23 u32 crs4; /* 0x410 Control Register Slave 4 */ 24 u32 res4[123]; /* 0x414 - 0x5FF */ 26 u32 prs6; /* 0x600 Priority Register Slave 6 */ 27 u32 res5[3]; /* 0x604 - 0F */ [all …]
|
/openbmc/linux/drivers/media/pci/cx18/ |
H A D | cx18-av-core.h | 32 CX18_AV_SVIDEO_LUMA1 = 0x10, 33 CX18_AV_SVIDEO_LUMA2 = 0x20, 34 CX18_AV_SVIDEO_LUMA3 = 0x30, 35 CX18_AV_SVIDEO_LUMA4 = 0x40, 36 CX18_AV_SVIDEO_LUMA5 = 0x50, 37 CX18_AV_SVIDEO_LUMA6 = 0x60, 38 CX18_AV_SVIDEO_LUMA7 = 0x70, 39 CX18_AV_SVIDEO_LUMA8 = 0x80, 40 CX18_AV_SVIDEO_CHROMA4 = 0x400, 41 CX18_AV_SVIDEO_CHROMA5 = 0x500, [all …]
|
/openbmc/u-boot/include/dt-bindings/pinctrl/ |
H A D | pins-imx8mq.h | 24 #define MX8MQ_IOMUXC_PMIC_STBY_REQ_CCMSRCGPCMIX_PMIC_STBY_REQ 0x014 0x27C 0x000 0x0 0… 25 #define MX8MQ_IOMUXC_PMIC_ON_REQ_SNVSMIX_PMIC_ON_REQ 0x018 0x280 0x000 0x0 0… 26 #define MX8MQ_IOMUXC_ONOFF_SNVSMIX_ONOFF 0x01C 0x284 0x000 0x0 0… 27 #define MX8MQ_IOMUXC_POR_B_SNVSMIX_POR_B 0x020 0x288 0x000 0x0 0… 28 #define MX8MQ_IOMUXC_RTC_RESET_B_SNVSMIX_RTC_RESET_B 0x024 0x28C 0x000 0x0 0… 29 #define MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0… 30 #define MX8MQ_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x4C0 0x1 0… 31 #define MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0… 32 #define MX8MQ_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0… 33 #define MX8MQ_IOMUXC_GPIO1_IO00_SJC_FAIL 0x028 0x290 0x000 0x7 0… [all …]
|
/openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imxrt1170-pinfunc.h | 10 #define IMX_PAD_SION 0x40000000 17 #define IOMUXC_GPIO_LPSR_00_FLEXCAN3_TX 0x000 0x040 0x0 0x0 0x0 18 #define IOMUXC_GPIO_LPSR_00_MIC_CLK 0x000 0x040 0x0 0x1 0x0 19 #define IOMUXC_GPIO_LPSR_00_MQS_RIGHT 0x000 0x040 0x0 0x2 0x0 20 #define IOMUXC_GPIO_LPSR_00_ARM_CM4_EVENTO 0x000 0x040 0x0 0x3 0x0 21 #define IOMUXC_GPIO_LPSR_00_GPIO_MUX6_IO00 0x000 0x040 0x0 0x5 0x0 22 #define IOMUXC_GPIO_LPSR_00_LPUART12_TXD 0x000 0x040 0x0B0 0x6 0x0 23 #define IOMUXC_GPIO_LPSR_00_SAI4_MCLK 0x000 0x040 0x0C8 0x7 0x0 24 #define IOMUXC_GPIO_LPSR_00_GPIO12_IO00 0x000 0x040 0x0 0xA 0x0 26 #define IOMUXC_GPIO_LPSR_01_FLEXCAN3_RX 0x004 0x044 0x080 0x0 0x0 [all …]
|
H A D | imx6sl-pinfunc.h | 13 #define MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x04c 0x2a4 0x000 0x0 0x0 14 #define MX6SL_PAD_AUD_MCLK__PWM4_OUT 0x04c 0x2a4 0x000 0x1 0x0 15 #define MX6SL_PAD_AUD_MCLK__ECSPI3_RDY 0x04c 0x2a4 0x6b4 0x2 0x0 16 #define MX6SL_PAD_AUD_MCLK__FEC_MDC 0x04c 0x2a4 0x000 0x3 0x0 17 #define MX6SL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x04c 0x2a4 0x000 0x4 0x0 18 #define MX6SL_PAD_AUD_MCLK__GPIO1_IO06 0x04c 0x2a4 0x000 0x5 0x0 19 #define MX6SL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x04c 0x2a4 0x7f4 0x6 0x0 20 #define MX6SL_PAD_AUD_RXC__AUD3_RXC 0x050 0x2a8 0x000 0x0 0x0 21 #define MX6SL_PAD_AUD_RXC__I2C1_SDA 0x050 0x2a8 0x720 0x1 0x0 22 #define MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x050 0x2a8 0x000 0x2 0x0 [all …]
|
H A D | imx53-pinfunc.h | 13 #define MX53_PAD_GPIO_19__KPP_COL_5 0x020 0x348 0x840 0x0 0x0 14 #define MX53_PAD_GPIO_19__GPIO4_5 0x020 0x348 0x000 0x1 0x0 15 #define MX53_PAD_GPIO_19__CCM_CLKO 0x020 0x348 0x000 0x2 0x0 16 #define MX53_PAD_GPIO_19__SPDIF_OUT1 0x020 0x348 0x000 0x3 0x0 17 #define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 0x020 0x348 0x000 0x4 0x0 18 #define MX53_PAD_GPIO_19__ECSPI1_RDY 0x020 0x348 0x000 0x5 0x0 19 #define MX53_PAD_GPIO_19__FEC_TDATA_3 0x020 0x348 0x000 0x6 0x0 20 #define MX53_PAD_GPIO_19__SRC_INT_BOOT 0x020 0x348 0x000 0x7 0x0 21 #define MX53_PAD_KEY_COL0__KPP_COL_0 0x024 0x34c 0x000 0x0 0x0 22 #define MX53_PAD_KEY_COL0__GPIO4_6 0x024 0x34c 0x000 0x1 0x0 [all …]
|
H A D | imx51-pinfunc.h | 13 #define MX51_PAD_EIM_D16__AUD4_RXFS 0x05c 0x3f0 0x000 0x5 0x0 14 #define MX51_PAD_EIM_D16__AUD5_TXD 0x05c 0x3f0 0x8d8 0x7 0x0 15 #define MX51_PAD_EIM_D16__EIM_D16 0x05c 0x3f0 0x000 0x0 0x0 16 #define MX51_PAD_EIM_D16__GPIO2_0 0x05c 0x3f0 0x000 0x1 0x0 17 #define MX51_PAD_EIM_D16__I2C1_SDA 0x05c 0x3f0 0x9b4 0x4 0x0 18 #define MX51_PAD_EIM_D16__UART2_CTS 0x05c 0x3f0 0x000 0x3 0x0 19 #define MX51_PAD_EIM_D16__USBH2_DATA0 0x05c 0x3f0 0x000 0x2 0x0 20 #define MX51_PAD_EIM_D17__AUD5_RXD 0x060 0x3f4 0x8d4 0x7 0x0 21 #define MX51_PAD_EIM_D17__EIM_D17 0x060 0x3f4 0x000 0x0 0x0 22 #define MX51_PAD_EIM_D17__GPIO2_1 0x060 0x3f4 0x000 0x1 0x0 [all …]
|
H A D | imx50-pinfunc.h | 13 #define MX50_PAD_KEY_COL0__KPP_COL_0 0x020 0x2cc 0x000 0x0 0x0 14 #define MX50_PAD_KEY_COL0__GPIO4_0 0x020 0x2cc 0x000 0x1 0x0 15 #define MX50_PAD_KEY_COL0__EIM_NANDF_CLE 0x020 0x2cc 0x000 0x2 0x0 16 #define MX50_PAD_KEY_COL0__CTI_TRIGIN7 0x020 0x2cc 0x000 0x6 0x0 17 #define MX50_PAD_KEY_COL0__USBPHY1_TXREADY 0x020 0x2cc 0x000 0x7 0x0 18 #define MX50_PAD_KEY_ROW0__KPP_ROW_0 0x024 0x2d0 0x000 0x0 0x0 19 #define MX50_PAD_KEY_ROW0__GPIO4_1 0x024 0x2d0 0x000 0x1 0x0 20 #define MX50_PAD_KEY_ROW0__EIM_NANDF_ALE 0x024 0x2d0 0x000 0x2 0x0 21 #define MX50_PAD_KEY_ROW0__CTI_TRIGIN_ACK7 0x024 0x2d0 0x000 0x6 0x0 22 #define MX50_PAD_KEY_ROW0__USBPHY1_RXVALID 0x024 0x2d0 0x000 0x7 0x0 [all …]
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | imx6sl-pinfunc.h | 17 #define MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x04c 0x2a4 0x000 0x0 0x0 18 #define MX6SL_PAD_AUD_MCLK__PWM4_OUT 0x04c 0x2a4 0x000 0x1 0x0 19 #define MX6SL_PAD_AUD_MCLK__ECSPI3_RDY 0x04c 0x2a4 0x6b4 0x2 0x0 20 #define MX6SL_PAD_AUD_MCLK__FEC_MDC 0x04c 0x2a4 0x000 0x3 0x0 21 #define MX6SL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x04c 0x2a4 0x000 0x4 0x0 22 #define MX6SL_PAD_AUD_MCLK__GPIO1_IO06 0x04c 0x2a4 0x000 0x5 0x0 23 #define MX6SL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x04c 0x2a4 0x7f4 0x6 0x0 24 #define MX6SL_PAD_AUD_RXC__AUD3_RXC 0x050 0x2a8 0x000 0x0 0x0 25 #define MX6SL_PAD_AUD_RXC__I2C1_SDA 0x050 0x2a8 0x720 0x1 0x0 26 #define MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x050 0x2a8 0x000 0x2 0x0 [all …]
|
H A D | imx53-pinfunc.h | 13 #define IMX_PAD_SION 0x40000000 18 #define MX53_PAD_GPIO_19__KPP_COL_5 0x020 0x348 0x840 0x0 0x0 19 #define MX53_PAD_GPIO_19__GPIO4_5 0x020 0x348 0x000 0x1 0x0 20 #define MX53_PAD_GPIO_19__CCM_CLKO 0x020 0x348 0x000 0x2 0x0 21 #define MX53_PAD_GPIO_19__SPDIF_OUT1 0x020 0x348 0x000 0x3 0x0 22 #define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 0x020 0x348 0x000 0x4 0x0 23 #define MX53_PAD_GPIO_19__ECSPI1_RDY 0x020 0x348 0x000 0x5 0x0 24 #define MX53_PAD_GPIO_19__FEC_TDATA_3 0x020 0x348 0x000 0x6 0x0 25 #define MX53_PAD_GPIO_19__SRC_INT_BOOT 0x020 0x348 0x000 0x7 0x0 26 #define MX53_PAD_KEY_COL0__KPP_COL_0 0x024 0x34c 0x000 0x0 0x0 [all …]
|
/openbmc/u-boot/board/aspeed/evb_ast2600/ |
H A D | evb_ast2600.c | 8 #define SCU_BASE 0x1e6e2000 9 #define ESPI_BASE 0x1e6ee000 10 #define LPC_BASE 0x1e789000 11 #define LPC_HICR5 (LPC_BASE + 0x80) 12 #define LPC_HICR6 (LPC_BASE + 0x84) 13 #define LPC_SNPWADR (LPC_BASE + 0x90) 14 #define LPC_HICRB (LPC_BASE + 0x100) 15 #define GPIO_BASE 0x1e780000 20 #define HICR5_SEL80HGIO (0x1f << 24) /* Select 80hGIO */ 21 #define SET_SEL80HGIO(x) ((x & 0x1f) << 24) /* Select 80hGIO Offset */ [all …]
|
/openbmc/u-boot/board/aspeed/ast2600_dcscm/ |
H A D | ast2600_dcscm.c | 8 #define SCU_BASE 0x1e6e2000 9 #define ESPI_BASE 0x1e6ee000 10 #define LPC_BASE 0x1e789000 11 #define LPC_HICR5 (LPC_BASE + 0x80) 12 #define LPC_HICR6 (LPC_BASE + 0x84) 13 #define LPC_SNPWADR (LPC_BASE + 0x90) 14 #define LPC_HICRB (LPC_BASE + 0x100) 15 #define GPIO_BASE 0x1e780000 20 #define HICR5_SEL80HGIO (0x1f << 24) /* Select 80hGIO */ 21 #define SET_SEL80HGIO(x) ((x & 0x1f) << 24) /* Select 80hGIO Offset */ [all …]
|