/openbmc/u-boot/arch/mips/mach-mt7620/ |
H A D | lowlevel_init.S | 27 #define DDR_CFG1_CHIP_WIDTH_MASK (0x3 << 16) 28 #define DDR_CFG1_BUS_WIDTH_MASK (0x3 << 12) 31 #define DDR_CFG1_SIZE_VAL 0x222e2323 35 #define DDR_CFG1_SIZE_VAL 0x22322323 39 #define DDR_CFG1_SIZE_VAL 0x22362323 43 #define DDR_CFG1_SIZE_VAL 0x223a2323 48 #define DDR_CFG1_CHIP_WIDTH_VAL (0x1 << 16) 51 #define DDR_CFG1_CHIP_WIDTH_VAL (0x2 << 16) 55 #define DDR_CFG1_BUS_WIDTH_VAL (0x2 << 12) 58 #define DDR_CFG1_BUS_WIDTH_VAL (0x3 << 12) [all …]
|
/openbmc/linux/drivers/media/pci/cx18/ |
H A D | cx18-av-audio.c | 60 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 in set_audclk_freq() 61 * AUX_PLL Integer = 0x0d, AUX PLL Post Divider = 0x20 in set_audclk_freq() 63 cx18_av_write4(cx, 0x108, 0x200d040f); in set_audclk_freq() 65 /* VID_PLL Fraction = 0x2be2fe */ in set_audclk_freq() 66 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz pre-postdiv*/ in set_audclk_freq() 67 cx18_av_write4(cx, 0x10c, 0x002be2fe); in set_audclk_freq() 69 /* AUX_PLL Fraction = 0x176740c */ in set_audclk_freq() 70 /* xtal * 0xd.bb3a060/0x20 = 32000 * 384: 393 MHz p-pd*/ in set_audclk_freq() 71 cx18_av_write4(cx, 0x110, 0x0176740c); in set_audclk_freq() 74 /* 0x1.f77f = (4 * xtal/8*2/455) / 32000 */ in set_audclk_freq() [all …]
|
/openbmc/linux/drivers/media/i2c/cx25840/ |
H A D | cx25840-audio.c | 39 * VID_PLL Integer = 0x0f, VID_PLL Post Divider = 0x04 in cx25840_set_audclk_freq() 40 * AUX_PLL Integer = 0x06, AUX PLL Post Divider = 0x10 in cx25840_set_audclk_freq() 42 cx25840_write4(client, 0x108, 0x1006040f); in cx25840_set_audclk_freq() 45 * VID_PLL Fraction (register 0x10c) = 0x2be2fe in cx25840_set_audclk_freq() 46 * 28636360 * 0xf.15f17f0/4 = 108 MHz in cx25840_set_audclk_freq() 51 * AUX_PLL Fraction = 0x1bb39ee in cx25840_set_audclk_freq() 52 * 28636363 * 0x6.dd9cf70/0x10 = 32000 * 384 in cx25840_set_audclk_freq() 57 cx25840_write4(client, 0x110, 0x01bb39ee); in cx25840_set_audclk_freq() 61 * SA_MCLK_DIV = 0x10 = 384/384 * AUX_PLL post dvivider in cx25840_set_audclk_freq() 63 cx25840_write(client, 0x127, 0x50); in cx25840_set_audclk_freq() [all …]
|
/openbmc/linux/drivers/media/pci/bt8xx/ |
H A D | bt878.h | 21 #define BT878_VERSION_CODE 0x000000 23 #define BT878_AINT_STAT 0x100 24 #define BT878_ARISCS (0xf<<28) 37 #define BT878_AINT_MASK 0x104 39 #define BT878_AGPIO_DMA_CTL 0x10c 40 #define BT878_A_GAIN (0xf<<28) 47 #define BT878_DA_LRD (0x1f<<16) 52 #define BT878_DA_SDR (0xf<<8) 60 #define BT878_APACK_LEN 0x110 61 #define BT878_AFP_LEN (0xff<<16) [all …]
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | am335x-draco.dts | 45 reg = <0x4b000000 1000000>; 53 pinctrl-0 = <&gpio_mux_pins>; 57 0x1d0 (PIN_INPUT | MUX_MODE0) /* tms jtag */ 58 0x1d4 (PIN_INPUT | MUX_MODE0) /* tdi jtag */ 59 0x1d8 (PIN_OUTPUT | MUX_MODE0) /* tdo jtag */ 60 0x1dc (PIN_INPUT | MUX_MODE0) /* tck jtag */ 61 0x1e0 (PIN_INPUT | MUX_MODE0) /* trstn jtag */ 67 0x0E8 (PIN_INPUT_PULLUP | MUX_MODE7) /* lcd_plck FIX STO should be a OUTPUT driven high*/ 68 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ 69 0x114 (PIN_OUTPUT | MUX_MODE1) /* mii1_txen.mii1_txen */ [all …]
|
H A D | vf610-pinfunc.h | 18 #define ALT0 0x0 19 #define ALT1 0x1 20 #define ALT2 0x2 21 #define ALT3 0x3 22 #define ALT4 0x4 23 #define ALT5 0x5 24 #define ALT6 0x6 25 #define ALT7 0x7 28 #define VF610_PAD_PTA6__GPIO_0 0x000 0x000 ALT0 0x0 29 #define VF610_PAD_PTA6__RMII_CLKOUT 0x000 0x000 ALT1 0x0 [all …]
|
/openbmc/linux/drivers/phy/qualcomm/ |
H A D | phy-qcom-qmp-qserdes-txrx.h | 10 #define QSERDES_TX_BIST_MODE_LANENO 0x000 11 #define QSERDES_TX_BIST_INVERT 0x004 12 #define QSERDES_TX_CLKBUF_ENABLE 0x008 13 #define QSERDES_TX_CMN_CONTROL_ONE 0x00c 14 #define QSERDES_TX_CMN_CONTROL_TWO 0x010 15 #define QSERDES_TX_CMN_CONTROL_THREE 0x014 16 #define QSERDES_TX_TX_EMP_POST1_LVL 0x018 17 #define QSERDES_TX_TX_POST2_EMPH 0x01c 18 #define QSERDES_TX_TX_BOOST_LVL_UP_DN 0x020 19 #define QSERDES_TX_HP_PD_ENABLES 0x024 [all …]
|
H A D | phy-qcom-qmp-qserdes-txrx-v4.h | 10 #define QSERDES_V4_TX_BIST_MODE_LANENO 0x000 11 #define QSERDES_V4_TX_BIST_INVERT 0x004 12 #define QSERDES_V4_TX_CLKBUF_ENABLE 0x008 13 #define QSERDES_V4_TX_TX_EMP_POST1_LVL 0x00c 14 #define QSERDES_V4_TX_TX_IDLE_LVL_LARGE_AMP 0x010 15 #define QSERDES_V4_TX_TX_DRV_LVL 0x014 16 #define QSERDES_V4_TX_TX_DRV_LVL_OFFSET 0x018 17 #define QSERDES_V4_TX_RESET_TSYNC_EN 0x01c 18 #define QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN 0x020 19 #define QSERDES_V4_TX_TX_BAND 0x024 [all …]
|
H A D | phy-qcom-qmp-qserdes-txrx-v5.h | 11 #define QSERDES_V5_TX_BIST_MODE_LANENO 0x000 12 #define QSERDES_V5_TX_BIST_INVERT 0x004 13 #define QSERDES_V5_TX_CLKBUF_ENABLE 0x008 14 #define QSERDES_V5_TX_TX_EMP_POST1_LVL 0x00c 15 #define QSERDES_V5_TX_TX_IDLE_LVL_LARGE_AMP 0x010 16 #define QSERDES_V5_TX_TX_DRV_LVL 0x014 17 #define QSERDES_V5_TX_TX_DRV_LVL_OFFSET 0x018 18 #define QSERDES_V5_TX_RESET_TSYNC_EN 0x01c 19 #define QSERDES_V5_TX_PRE_STALL_LDO_BOOST_EN 0x020 20 #define QSERDES_V5_TX_TX_BAND 0x024 [all …]
|
H A D | phy-qcom-qmp-qserdes-ln-shrd-v6.h | 9 #define QSERDES_V6_LN_SHRD_RXCLK_DIV2_CTRL 0xa0 10 #define QSERDES_V6_LN_SHRD_RX_Q_EN_RATES 0xb0 11 #define QSERDES_V6_LN_SHRD_DFE_DAC_ENABLE1 0xb4 12 #define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH1 0xc4 13 #define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH2 0xc8 14 #define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B0 0xd4 15 #define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B1 0xd8 16 #define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B2 0xdc 17 #define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B3 0xe0 18 #define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B4 0xe4 [all …]
|
H A D | phy-qcom-qmp-qserdes-txrx-v6_20.h | 9 #define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_TX 0x30 10 #define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_RX 0x34 11 #define QSERDES_V6_20_TX_TRAN_DRVR_EMP_EN 0xac 12 #define QSERDES_V6_20_TX_LANE_MODE_1 0x78 13 #define QSERDES_V6_20_TX_LANE_MODE_2 0x7c 14 #define QSERDES_V6_20_TX_LANE_MODE_3 0x80 16 #define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2 0x08 17 #define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3 0x0c 18 #define QSERDES_V6_20_RX_UCDR_PI_CONTROLS 0x20 19 #define QSERDES_V6_20_RX_UCDR_SO_ACC_DEFAULT_VAL_RATE3 0x34 [all …]
|
H A D | phy-qcom-qmp-qserdes-pll.h | 10 #define QSERDES_PLL_BG_TIMER 0x00c 11 #define QSERDES_PLL_SSC_PER1 0x01c 12 #define QSERDES_PLL_SSC_PER2 0x020 13 #define QSERDES_PLL_SSC_STEP_SIZE1_MODE0 0x024 14 #define QSERDES_PLL_SSC_STEP_SIZE2_MODE0 0x028 15 #define QSERDES_PLL_SSC_STEP_SIZE1_MODE1 0x02c 16 #define QSERDES_PLL_SSC_STEP_SIZE2_MODE1 0x030 17 #define QSERDES_PLL_BIAS_EN_CLKBUFLR_EN 0x03c 18 #define QSERDES_PLL_CLK_ENABLE1 0x040 19 #define QSERDES_PLL_SYS_CLK_CTRL 0x044 [all …]
|
H A D | phy-qcom-qmp-qserdes-txrx-v3.h | 10 #define QSERDES_V3_TX_BIST_MODE_LANENO 0x000 11 #define QSERDES_V3_TX_CLKBUF_ENABLE 0x008 12 #define QSERDES_V3_TX_TX_EMP_POST1_LVL 0x00c 13 #define QSERDES_V3_TX_TX_DRV_LVL 0x01c 14 #define QSERDES_V3_TX_RESET_TSYNC_EN 0x024 15 #define QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN 0x028 16 #define QSERDES_V3_TX_TX_BAND 0x02c 17 #define QSERDES_V3_TX_SLEW_CNTL 0x030 18 #define QSERDES_V3_TX_INTERFACE_SELECT 0x034 19 #define QSERDES_V3_TX_RES_CODE_LANE_TX 0x03c [all …]
|
/openbmc/qemu/hw/misc/ |
H A D | arm_l2x0.c | 30 #define CACHE_ID 0x410000c8 69 offset &= 0xfff; in l2x0_priv_read() 70 if (offset >= 0x730 && offset < 0x800) { in l2x0_priv_read() 71 return 0; /* cache ops complete */ in l2x0_priv_read() 74 case 0: in l2x0_priv_read() 76 case 0x4: in l2x0_priv_read() 81 case 0x100: in l2x0_priv_read() 83 case 0x104: in l2x0_priv_read() 85 case 0x108: in l2x0_priv_read() 87 case 0x10C: in l2x0_priv_read() [all …]
|
/openbmc/linux/arch/arm/mach-orion5x/ |
H A D | bridge-regs.h | 9 #define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE + 0x100) 11 #define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE + 0x104) 13 #define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x108) 14 #define RSTOUTn_MASK_PHYS (ORION5X_BRIDGE_PHYS_BASE + 0x108) 16 #define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE + 0x10c) 18 #define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE + 0x110) 20 #define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE + 0x11C) 22 #define BRIDGE_INT_TIMER1_CLR (~0x0004) 24 #define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE + 0x200) 26 #define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x204) [all …]
|
/openbmc/u-boot/arch/arm/include/asm/arch-tegra/ |
H A D | fuse.h | 12 u32 reserved0[64]; /* 0x00 - 0xFC: */ 13 u32 production_mode; /* 0x100: FUSE_PRODUCTION_MODE */ 14 u32 reserved1[3]; /* 0x104 - 0x10c: */ 15 u32 sku_info; /* 0x110 */ 16 u32 reserved2[13]; /* 0x114 - 0x144: */ 17 u32 fa; /* 0x148: FUSE_FA */ 18 u32 reserved3[21]; /* 0x14C - 0x19C: */ 19 u32 security_mode; /* 0x1A0: FUSE_SECURITY_MODE */
|
/openbmc/u-boot/arch/arm/mach-at91/include/mach/ |
H A D | at91_pdc.h | 10 u32 rpr; /* 0x100 Receive Pointer Register */ 11 u32 rcr; /* 0x104 Receive Counter Register */ 12 u32 tpr; /* 0x108 Transmit Pointer Register */ 13 u32 tcr; /* 0x10C Transmit Counter Register */ 14 u32 pnpr; /* 0x110 Receive Next Pointer Register */ 15 u32 pncr; /* 0x114 Receive Next Counter Register */ 16 u32 tnpr; /* 0x118 Transmit Next Pointer Register */ 17 u32 tncr; /* 0x11C Transmit Next Counter Register */ 18 u32 ptcr; /* 0x120 Transfer Control Register */ 19 u32 ptsr; /* 0x124 Transfer Status Register */
|
/openbmc/linux/arch/arm/mach-s3c/ |
H A D | regs-clock-s3c64xx.h | 20 #define S3C_PCLK_GATE S3C_CLKREG(0x34) 21 #define S3C6410_CLK_SRC2 S3C_CLKREG(0x10C) 22 #define S3C_MEM_SYS_CFG S3C_CLKREG(0x120) 31 #define MEM_SYS_CFG_INDEP_CF 0x4000 32 #define MEM_SYS_CFG_EBI_FIX_PRI_CFCON 0x30
|
/openbmc/linux/tools/perf/pmu-events/arch/arm64/ampere/emag/ |
H A D | pipeline.json | 4 "EventCode": "0x108", 10 "EventCode": "0x109", 16 "EventCode": "0x10a", 22 "EventCode": "0x10b", 28 "EventCode": "0x10c", 34 "EventCode": "0x10d", 40 "EventCode": "0x10e", 46 "EventCode": "0x10f",
|
/openbmc/u-boot/arch/arm/mach-rmobile/include/mach/ |
H A D | sh73a0.h | 5 #define GLOBAL_TIMER_BASE_ADDR (0xF0000200) 6 #define MERAM_BASE (0xE5580000) 9 #define GIC_BASE (0xF0000100) 13 #define LIFEC_SEC_SRC (0xE6110008) 16 #define RWDT_BASE (0xE6020000) 19 #define HPB_BASE (0xE6001010) 22 #define HPBSCR_BASE (0xE6001600) 25 #define SBSC1_BASE (0xFE400000) 26 #define SDMRA1A (SBSC1_BASE + 0x100000) 27 #define SDMRA2A (SBSC1_BASE + 0x1C0000) [all …]
|
/openbmc/linux/arch/arm/boot/dts/ti/omap/ |
H A D | omap4-mcpdm.dtsi | 12 /* 0x4a100106 abe_pdm_ul_data.abe_pdm_ul_data ag25 */ 13 OMAP4_IOPAD(0x106, PIN_INPUT_PULLDOWN | MUX_MODE0) 15 /* 0x4a100108 abe_pdm_dl_data.abe_pdm_dl_data af25 */ 16 OMAP4_IOPAD(0x108, PIN_INPUT_PULLDOWN | MUX_MODE0) 18 /* 0x4a10010a abe_pdm_frame.abe_pdm_frame ae25 */ 19 OMAP4_IOPAD(0x10a, PIN_INPUT_PULLUP | MUX_MODE0) 21 /* 0x4a10010c abe_pdm_lb_clk.abe_pdm_lb_clk af26 */ 22 OMAP4_IOPAD(0x10c, PIN_INPUT_PULLDOWN | MUX_MODE0) 24 /* 0x4a10010e abe_clks.abe_clks ah26 */ 25 OMAP4_IOPAD(0x10e, PIN_INPUT_PULLDOWN | MUX_MODE0) [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/soc/tegra/ |
H A D | nvidia,tegra20-ahb.yaml | 39 reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
|
/openbmc/linux/include/linux/ |
H A D | atmel_pdc.h | 15 #define ATMEL_PDC_RPR 0x100 /* Receive Pointer Register */ 16 #define ATMEL_PDC_RCR 0x104 /* Receive Counter Register */ 17 #define ATMEL_PDC_TPR 0x108 /* Transmit Pointer Register */ 18 #define ATMEL_PDC_TCR 0x10c /* Transmit Counter Register */ 19 #define ATMEL_PDC_RNPR 0x110 /* Receive Next Pointer Register */ 20 #define ATMEL_PDC_RNCR 0x114 /* Receive Next Counter Register */ 21 #define ATMEL_PDC_TNPR 0x118 /* Transmit Next Pointer Register */ 22 #define ATMEL_PDC_TNCR 0x11c /* Transmit Next Counter Register */ 24 #define ATMEL_PDC_PTCR 0x120 /* Transfer Control Register */ 25 #define ATMEL_PDC_RXTEN (1 << 0) /* Receiver Transfer Enable */ [all …]
|
/openbmc/linux/drivers/video/fbdev/ |
H A D | wm8505fb_regs.h | 15 * Color space select register, default value 0x1c 22 #define WMT_GOVR_COLORSPACE 0x1e4 28 #define WMT_GOVR_COLORSPACE1 0x30 30 #define WMT_GOVR_CONTRAST 0x1b8 31 #define WMT_GOVR_BRGHTNESS 0x1bc /* incompatible with RGB? */ 34 #define WMT_GOVR_FBADDR 0x90 35 #define WMT_GOVR_FBADDR1 0x94 /* UV offset in YUV mode */ 38 #define WMT_GOVR_XPAN 0xa4 39 #define WMT_GOVR_YPAN 0xa0 41 #define WMT_GOVR_XRES 0x98 [all …]
|
/openbmc/u-boot/include/dt-bindings/clock/ |
H A D | am3.h | 16 #define AM3_CLKCTRL_OFFSET 0x0 22 #define AM3_L4_PER_CLKCTRL_OFFSET 0x14 24 #define AM3_CPGMAC0_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x14) 25 #define AM3_LCDC_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x18) 26 #define AM3_USB_OTG_HS_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x1c) 27 #define AM3_TPTC0_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x24) 28 #define AM3_EMIF_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x28) 29 #define AM3_OCMCRAM_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x2c) 30 #define AM3_GPMC_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x30) 31 #define AM3_MCASP0_CLKCTRL AM3_L4_PER_CLKCTRL_INDEX(0x34) [all …]
|