/openbmc/u-boot/board/tplink/wdr4300/ |
H A D | wdr4300.c | 42 writel(0x40, regs + AR934X_GPIO_REG_FUNC); in wdr4300_pinmux_config() 45 writel(0x3031b, regs + AR71XX_GPIO_REG_OE); in wdr4300_pinmux_config() 46 writel(0x0f804, regs + AR71XX_GPIO_REG_OUT); in wdr4300_pinmux_config() 49 writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC0); in wdr4300_pinmux_config() 50 writel(0x0b0a0980, regs + AR934X_GPIO_REG_OUT_FUNC1); in wdr4300_pinmux_config() 51 writel(0x00180000, regs + AR934X_GPIO_REG_OUT_FUNC2); in wdr4300_pinmux_config() 52 writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC3); in wdr4300_pinmux_config() 53 writel(0x0000004d, regs + AR934X_GPIO_REG_OUT_FUNC4); in wdr4300_pinmux_config() 54 writel(0x00000000, regs + AR934X_GPIO_REG_OUT_FUNC5); in wdr4300_pinmux_config() 79 return 0; in board_early_init_f()
|
/openbmc/linux/Documentation/devicetree/bindings/thermal/ |
H A D | qoriq-thermal.yaml | 16 Register (IPBRR0) at offset 0x0BF8. 20 0x01900102 T1040 78 reg = <0xf0000 0x1000>; 79 interrupts = <18 2 0 0>; 80 fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>; 81 fsl,tmu-calibration = <0x00000000 0x00000025>, 82 <0x00000001 0x00000028>, 83 <0x00000002 0x0000002d>, 84 <0x00000003 0x00000031>, 85 <0x00000004 0x00000036>, [all …]
|
/openbmc/linux/drivers/staging/rtl8192u/ |
H A D | r819xU_firmware_img.c | 7 0x0, }; 10 0x800, 0x00000000, 11 0x804, 0x00000001, 12 0x808, 0x0000fc00, 13 0x80c, 0x0000001c, 14 0x810, 0x801010aa, 15 0x814, 0x008514d0, 16 0x818, 0x00000040, 17 0x81c, 0x00000000, 18 0x820, 0x00000004, [all …]
|
/openbmc/linux/drivers/staging/rtl8192e/rtl8192e/ |
H A D | table.c | 10 0x800, 0x00000000, 11 0x804, 0x00000001, 12 0x808, 0x0000fc00, 13 0x80c, 0x0000001c, 14 0x810, 0x801010aa, 15 0x814, 0x008514d0, 16 0x818, 0x00000040, 17 0x81c, 0x00000000, 18 0x820, 0x00000004, 19 0x824, 0x00690000, [all …]
|
/openbmc/linux/drivers/net/wireless/broadcom/b43/ |
H A D | tables_phy_lcn.c | 30 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 31 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 32 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 33 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 34 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 35 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 36 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 37 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 38 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 39 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, 0x014d, [all …]
|
/openbmc/linux/arch/arm/boot/dts/nvidia/ |
H A D | tegra20-acer-a500-picasso.dts | 37 memory@0 { 38 reg = <0x00000000 0x40000000>; 48 reg = <0x2ffe0000 0x10000>; /* 64kB */ 49 console-size = <0x8000>; /* 32kB */ 50 record-size = <0x400>; /* 1kB */ 56 alloc-ranges = <0x30000000 0x10000000>; 57 size = <0x10000000>; /* 256MiB */ 68 port@0 { 92 pinctrl-0 = <&state_default>; 425 shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; [all …]
|
H A D | tegra124-jetson-tk1-emc.dtsi | 104 0x40040001 105 0x8000000a 106 0x00000001 107 0x00000001 108 0x00000002 109 0x00000000 110 0x00000002 111 0x00000001 112 0x00000003 113 0x00000008 [all …]
|
H A D | tegra124-apalis-emc.dtsi | 108 0x40040001 0x8000000a 109 0x00000001 0x00000001 110 0x00000002 0x00000000 111 0x00000002 0x00000001 112 0x00000003 0x00000008 113 0x00000003 0x00000002 114 0x00000003 0x00000006 115 0x06030203 0x000a0502 116 0x77e30303 0x70000f03 117 0x001f0000 [all …]
|
H A D | tegra124-nyan-blaze-emc.dtsi | 92 0x40040001 93 0x8000000a 94 0x00000001 95 0x00000001 96 0x00000002 97 0x00000000 98 0x00000002 99 0x00000001 100 0x00000002 101 0x00000008 [all …]
|
H A D | tegra20-asus-tf101.dts | 38 memory@0 { 39 reg = <0x00000000 0x40000000>; 49 reg = <0x2ffe0000 0x10000>; /* 64kB */ 50 console-size = <0x8000>; /* 32kB */ 51 record-size = <0x400>; /* 1kB */ 57 alloc-ranges = <0x30000000 0x10000000>; 58 size = <0x10000000>; /* 256MiB */ 69 port@0 { 101 pinctrl-0 = <&state_default>; 482 shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>; [all …]
|
/openbmc/linux/drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/ |
H A D | phytbl_lcn.c | 10 0x00000000, 11 0x00000000, 12 0x00000000, 13 0x00000000, 14 0x00000000, 15 0x00000000, 16 0x00000000, 17 0x00000000, 18 0x00000004, 19 0x00000000, [all …]
|
/openbmc/linux/drivers/gpu/drm/amd/include/ |
H A D | soc21_enum.h | 55 DSM_DATA_SEL_DISABLE = 0x00000000, 56 DSM_DATA_SEL_0 = 0x00000001, 57 DSM_DATA_SEL_1 = 0x00000002, 58 DSM_DATA_SEL_BOTH = 0x00000003, 66 DSM_ENABLE_ERROR_INJECT_FED_IN = 0x00000000, 67 DSM_ENABLE_ERROR_INJECT_SINGLE = 0x00000001, 68 DSM_ENABLE_ERROR_INJECT_UNCORRECTABLE = 0x00000002, 69 DSM_ENABLE_ERROR_INJECT_UNCORRECTABLE_LIMITED = 0x00000003, 77 DSM_SELECT_INJECT_DELAY_NO_DELAY = 0x00000000, 78 DSM_SELECT_INJECT_DELAY_DELAY_ERROR = 0x00000001, [all …]
|
H A D | navi10_enum.h | 51 GDS_PERF_SEL_DS_ADDR_CONFL = 0, 184 GATCL1_TYPE_NORMAL = 0x00000000, 185 GATCL1_TYPE_SHOOTDOWN = 0x00000001, 186 GATCL1_TYPE_BYPASS = 0x00000002, 194 UTCL1_TYPE_NORMAL = 0x00000000, 195 UTCL1_TYPE_SHOOTDOWN = 0x00000001, 196 UTCL1_TYPE_BYPASS = 0x00000002, 204 UTCL1_XNACK_SUCCESS = 0x00000000, 205 UTCL1_XNACK_RETRY = 0x00000001, 206 UTCL1_XNACK_PRT = 0x00000002, [all …]
|
H A D | vega10_enum.h | 51 GDS_PERF_SEL_DS_ADDR_CONFL = 0, 184 NO_FORCE_REQUEST = 0x00000000, 185 FORCE_LIGHT_SLEEP_REQUEST = 0x00000001, 186 FORCE_DEEP_SLEEP_REQUEST = 0x00000002, 187 FORCE_SHUT_DOWN_REQUEST = 0x00000003, 195 NO_FORCE_REQ = 0x00000000, 196 FORCE_LIGHT_SLEEP_REQ = 0x00000001, 204 ENABLE_MEM_PWR_CTRL = 0x00000000, 205 DISABLE_MEM_PWR_CTRL = 0x00000001, 213 DYNAMIC_SHUT_DOWN_ENABLE = 0x00000000, [all …]
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | rk3399-sdram-ddr3-1866.dtsi | 8 0x1 9 0xa 10 0x3 11 0x2 12 0x1 13 0x0 14 0xf 15 0xf 17 0x80181219 18 0x17050a03 [all …]
|
H A D | rk3399-sdram-ddr3-1333.dtsi | 8 0x1 9 0xa 10 0x3 11 0x2 12 0x1 13 0x0 14 0xf 15 0xf 17 0x80120e12 18 0x11030802 [all …]
|
H A D | rk3399-sdram-ddr3-1600.dtsi | 8 0x1 9 0xa 10 0x3 11 0x2 12 0x1 13 0x0 14 0xf 15 0xf 17 0x80151015 18 0x14040902 [all …]
|
/openbmc/linux/arch/arm64/boot/dts/freescale/ |
H A D | fsl-ls1012a.dtsi | 32 #size-cells = <0>; 34 cpu0: cpu@0 { 37 reg = <0x0>; 38 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 54 arm,psci-suspend-param = <0x0>; 63 #clock-cells = <0>; 70 #clock-cells = <0>; 85 interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; 92 reg = <0x0 0x1401000 0 0x1000>, /* GICD */ 93 <0x0 0x1402000 0 0x2000>, /* GICC */ [all …]
|
H A D | fsl-ls1028a.dtsi | 23 #size-cells = <0>; 25 cpu0: cpu@0 { 28 reg = <0x0>; 30 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 31 i-cache-size = <0xc000>; 34 d-cache-size = <0x8000>; 45 reg = <0x1>; 47 clocks = <&clockgen QORIQ_CLK_CMUX 0>; 48 i-cache-size = <0xc000>; 51 d-cache-size = <0x8000>; [all …]
|
H A D | fsl-ls208xa.dtsi | 33 #size-cells = <0>; 38 reg = <0x00000000 0x80000000 0 0x80000000>; 44 #clock-cells = <0>; 51 reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ 52 <0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */ 53 <0x0 0x0c0c0000 0 0x2000>, /* GICC */ 54 <0x0 0x0c0d0000 0 0x1000>, /* GICH */ 55 <0x0 0x0c0e0000 0 0x20000>; /* GICV */ 61 interrupts = <1 9 0x4>; 66 reg = <0x0 0x6020000 0 0x20000>; [all …]
|
/openbmc/linux/drivers/net/wireless/realtek/rtw88/ |
H A D | rtw8822c_table.c | 16 0x83000000, 0x00000000, 0x40000000, 0x00000000, 17 0x1D90, 0x300001FF, 18 0x1D90, 0x300101FE, 19 0x1D90, 0x300201FD, 20 0x1D90, 0x300301FC, 21 0x1D90, 0x300401FB, 22 0x1D90, 0x300501FA, 23 0x1D90, 0x300601F9, 24 0x1D90, 0x300701F8, 25 0x1D90, 0x300801F7, [all …]
|
/openbmc/linux/arch/powerpc/boot/dts/fsl/ |
H A D | t1040si-post.dtsi | 39 alloc-ranges = <0 0 0x10000 0>; 44 alloc-ranges = <0 0 0x10000 0>; 49 alloc-ranges = <0 0 0x10000 0>; 56 interrupts = <25 2 0 0>; 64 bus-range = <0x0 0xff>; 65 interrupts = <20 2 0 0>; 67 pcie@0 { 68 reg = <0 0 0 0 0>; 73 interrupts = <20 2 0 0>; 74 interrupt-map-mask = <0xf800 0 0 7>; [all …]
|
/openbmc/linux/drivers/scsi/ |
H A D | 53c700_d.h_shipped | 28 ABSOLUTE Device_ID = 0 ; ID of target for command 29 ABSOLUTE MessageCount = 0 ; Number of bytes in message 30 ABSOLUTE MessageLocation = 0 ; Addr of message 31 ABSOLUTE CommandCount = 0 ; Number of bytes in command 32 ABSOLUTE CommandAddress = 0 ; Addr of Command 33 ABSOLUTE StatusAddress = 0 ; Addr to receive status return 34 ABSOLUTE ReceiveMsgAddress = 0 ; Addr to receive msg 42 ABSOLUTE SGScriptStartAddress = 0 45 ; this: 0xPRS where 48 ABSOLUTE AFTER_SELECTION = 0x100 [all …]
|
/openbmc/linux/crypto/ |
H A D | aes_generic.c | 67 0xa56363c6, 0x847c7cf8, 0x997777ee, 0x8d7b7bf6, 68 0x0df2f2ff, 0xbd6b6bd6, 0xb16f6fde, 0x54c5c591, 69 0x50303060, 0x03010102, 0xa96767ce, 0x7d2b2b56, 70 0x19fefee7, 0x62d7d7b5, 0xe6abab4d, 0x9a7676ec, 71 0x45caca8f, 0x9d82821f, 0x40c9c989, 0x877d7dfa, 72 0x15fafaef, 0xeb5959b2, 0xc947478e, 0x0bf0f0fb, 73 0xecadad41, 0x67d4d4b3, 0xfda2a25f, 0xeaafaf45, 74 0xbf9c9c23, 0xf7a4a453, 0x967272e4, 0x5bc0c09b, 75 0xc2b7b775, 0x1cfdfde1, 0xae93933d, 0x6a26264c, 76 0x5a36366c, 0x413f3f7e, 0x02f7f7f5, 0x4fcccc83, [all …]
|
/openbmc/linux/drivers/net/wireless/marvell/mwifiex/ |
H A D | fw.h | 54 #define FW_DUMP_INFO_ENDED 0x0002 56 #define MWIFIEX_FW_DNLD_CMD_1 0x1 57 #define MWIFIEX_FW_DNLD_CMD_5 0x5 58 #define MWIFIEX_FW_DNLD_CMD_6 0x6 59 #define MWIFIEX_FW_DNLD_CMD_7 0x7 84 (((adapter->fw_cap_info & 0x2f00) >> 8) & \ 87 #define HostCmd_WEP_KEY_INDEX_MASK 0x3fff 89 #define KEY_INFO_ENABLED 0x01 91 KEY_TYPE_ID_WEP = 0, 101 #define KEY_INDEX_MASK 0xf [all …]
|