/openbmc/linux/arch/arm/mach-omap1/ |
H A D | opp_data.c | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * linux/arch/arm/mach-omap1/opp_data.c 5 * Copyright (C) 2004 - 2005 Nokia corporation 13 /*------------------------------------------------------------------------- 15 *-------------------------------------------------------------------------*/ 21 { 216000000, 12000000, 216000000, 0x050d, 0x2910, /* 1/1/2/2/2/8 */ 27 { 192000000, 12000000, 192000000, 0x050f, 0x2810, /* 1/1/2/2/8/8 */ 29 { 96000000, 12000000, 192000000, 0x055f, 0x2810, /* 2/2/2/2/8/8 */ 31 { 48000000, 12000000, 192000000, 0x0baf, 0x2810, /* 4/4/4/8/8/8 */ 33 { 24000000, 12000000, 192000000, 0x0fff, 0x2810, /* 8/8/8/8/8/8 */ [all …]
|
/openbmc/linux/arch/arm/boot/dts/marvell/ |
H A D | armada-388-gp.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 4 * (RD-88F6820-GP) 8 * Gregory CLEMENT <gregory.clement@free-electrons.com> 11 /dts-v1/; 12 #include "armada-388.dtsi" 13 #include <dt-bindings/gpio/gpio.h> 16 model = "Marvell Armada 388 DB-88F6820-GP"; 17 compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380"; 20 stdout-path = "serial0:115200n8"; 35 internal-regs { [all …]
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | armada-388-gp.dts | 3 * (RD-88F6820-GP) 7 * Gregory CLEMENT <gregory.clement@free-electrons.com> 9 * This file is dual-licensed: you can use it either under the terms 42 /dts-v1/; 43 #include "armada-388.dtsi" 44 #include <dt-bindings/gpio/gpio.h> 48 compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380"; 51 stdout-path = "serial0:115200n8"; 69 internal-regs { 71 pinctrl-names = "default"; [all …]
|
/openbmc/linux/drivers/clk/actions/ |
H A D | owl-s700.c | 1 // SPDX-License-Identifier: GPL-2.0+ 6 * Author: David Liu <liuwei@actions-semi.com> 12 #include <linux/clk-provider.h> 15 #include "owl-common.h" 16 #include "owl-composite.h" 17 #include "owl-divider.h" 18 #include "owl-factor.h" 19 #include "owl-fixed-factor.h" 20 #include "owl-gate.h" 21 #include "owl-mux.h" [all …]
|
/openbmc/linux/drivers/clk/tegra/ |
H A D | clk-tegra124.c | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * Copyright (c) 2012-2014 NVIDIA CORPORATION. All rights reserved. 7 #include <linux/clk-provider.h> 14 #include <dt-bindings/clock/tegra124-car.h> 15 #include <dt-bindings/reset/tegra124-car.h> 18 #include "clk-id.h" 95 #define MASK(x) (BIT(x) - 1) 138 [ 8] = 12000000, 173 { 12000000, 1000000000, 83, 1, 1, 0 }, /* actual: 996.0 MHz */ 182 .input_min = 12000000, [all …]
|
H A D | clk-tegra114.c | 1 // SPDX-License-Identifier: GPL-2.0-only 7 #include <linux/clk-provider.h> 13 #include <dt-bindings/clock/tegra114-car.h> 16 #include "clk-id.h" 20 #define CPU_FINETRIM_DR 0x4d8 /* rise->rise prop dly A */ 21 #define CPU_FINETRIM_R 0x4e4 /* rise->rise prop dly inc A */ 168 { 12000000, 624000000, 104, 1, 2, 0 }, 169 { 12000000, 600000000, 100, 1, 2, 0 }, 178 .input_min = 12000000, 180 .cf_min = 12000000, [all …]
|
H A D | clk-tegra20.c | 1 // SPDX-License-Identifier: GPL-2.0-only 7 #include <linux/clk-provider.h> 15 #include <dt-bindings/clock/tegra20-car.h> 18 #include "clk-id.h" 160 { 12000000, 600000000, 600, 12, 1, 8 }, 168 { 12000000, 666000000, 666, 12, 1, 8 }, 172 { 12000000, 600000000, 600, 12, 1, 8 }, 180 { 12000000, 216000000, 432, 12, 2, 8 }, 184 { 12000000, 432000000, 432, 12, 1, 8 }, 199 { 12000000, 216000000, 216, 12, 1, 4 }, [all …]
|
H A D | clk-tegra30.c | 1 // SPDX-License-Identifier: GPL-2.0-only 8 #include <linux/clk-provider.h> 18 #include <dt-bindings/clock/tegra30-car.h> 21 #include "clk-id.h" 187 { 12000000, 1040000000, 520, 6, 1, 8 }, 192 { 12000000, 832000000, 416, 6, 1, 8 }, 197 { 12000000, 624000000, 624, 12, 1, 8 }, 202 { 12000000, 600000000, 600, 12, 1, 8 }, 207 { 12000000, 520000000, 520, 12, 1, 8 }, 212 { 12000000, 416000000, 416, 12, 1, 8 }, [all …]
|
/openbmc/linux/arch/arm64/boot/dts/amlogic/ |
H A D | meson-sm1-odroid-hc4.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 8 #include "meson-sm1-odroid.dtsi" 11 compatible = "hardkernel,odroid-hc4", "amlogic,sm1"; 12 model = "Hardkernel ODROID-HC4"; 19 fan0: pwm-fan { 20 compatible = "pwm-fan"; 21 #cooling-cells = <2>; 22 cooling-levels = <0 120 170 220>; 27 compatible = "gpio-leds"; [all …]
|
/openbmc/linux/sound/soc/codecs/ |
H A D | wm8737.c | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * wm8737.c -- WM8737 ALSA SoC Audio driver 25 #include <sound/soc-dapm.h> 47 { 0, 0x00C3 }, /* R0 - Left PGA volume */ 48 { 1, 0x00C3 }, /* R1 - Right PGA volume */ 49 { 2, 0x0007 }, /* R2 - AUDIO path L */ 50 { 3, 0x0007 }, /* R3 - AUDIO path R */ 51 { 4, 0x0000 }, /* R4 - 3D Enhance */ 52 { 5, 0x0000 }, /* R5 - ADC Control */ 53 { 6, 0x0000 }, /* R6 - Power Management */ [all …]
|
H A D | ssm2602.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 85 48, 127, TLV_DB_SCALE_ITEM(-7400, 100, 0) 88 static const DECLARE_TLV_DB_SCALE(ssm260x_inpga_tlv, -3450, 150, 0); 89 static const DECLARE_TLV_DB_SCALE(ssm260x_sidetone_tlv, -1500, 300, 0); 99 SOC_ENUM("Playback De-emphasis", ssm2602_enum[1]), 178 ARRAY_SIZE(ssm260x_output_mixer_controls) - 1), /* Last element is the mic */ 245 {12000000, 48000, SSM2602_COEFF_SRATE(0x0, 0x0, 0x1)}, 250 {12000000, 32000, SSM2602_COEFF_SRATE(0x6, 0x0, 0x1)}, 255 {12000000, 16000, SSM2602_COEFF_SRATE(0xa, 0x0, 0x1)}, 262 {12000000, 8000, SSM2602_COEFF_SRATE(0x3, 0x0, 0x1)}, [all …]
|
H A D | wm8711.c | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * wm8711.c -- WM8711 ALSA SoC Audio driver 60 static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1); 114 {12000000, 48000, 250, 0x0, 0x0, 0x1}, 119 {12000000, 32000, 375, 0x6, 0x0, 0x1}, 126 {12000000, 8000, 1500, 0x3, 0x0, 0x1}, 131 {12000000, 96000, 125, 0x7, 0x0, 0x1}, 136 {12000000, 44100, 272, 0x8, 0x1, 0x1}, 141 {12000000, 88200, 136, 0xf, 0x1, 0x1}, 159 struct snd_soc_component *component = dai->component; in wm8711_hw_params() [all …]
|
H A D | wm8971.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 3 * wm8971.c -- WM8971 ALSA SoC Audio driver 159 SOC_ENUM("Treble Cut-off", wm8971_enum[2]), 180 SOC_ENUM("Playback De-emphasis", wm8971_enum[5]), 375 {12000000, 8000, 1500, 0x6, 0x1}, 380 {12000000, 11025, 1088, 0x19, 0x1}, 385 {12000000, 16000, 750, 0xa, 0x1}, 390 {12000000, 22050, 544, 0x1b, 0x1}, 395 {12000000, 32000, 375, 0xa, 0x1}, 400 {12000000, 44100, 272, 0x11, 0x1}, [all …]
|
H A D | tlv320aic31xx.c | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/ 10 * The TLV320AIC31xx series of audio codecs are low-power, highly integrated 12 * and mono/stereo Class-D speaker driver. 35 #include <dt-bindings/sound/tlv320aic31xx.h> 179 u8 ocmv; /* output common-mode voltage */ 201 {12000000, 8000, 1, 8, 1920, 128, 48, 2, 128, 48, 2}, 202 {12000000, 8000, 1, 8, 1920, 128, 32, 3, 128, 32, 3}, 206 {12000000, 11025, 1, 7, 5264, 128, 32, 2, 128, 32, 2}, 207 {12000000, 11025, 1, 8, 4672, 128, 24, 3, 128, 24, 3}, [all …]
|
H A D | wm8955.c | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * wm8955.c -- WM8955 ALSA SoC Audio driver 50 { 2, 0x0079 }, /* R2 - LOUT1 volume */ 51 { 3, 0x0079 }, /* R3 - ROUT1 volume */ 52 { 5, 0x0008 }, /* R5 - DAC Control */ 53 { 7, 0x000A }, /* R7 - Audio Interface */ 54 { 8, 0x0000 }, /* R8 - Sample Rate */ 55 { 10, 0x00FF }, /* R10 - Left DAC volume */ 56 { 11, 0x00FF }, /* R11 - Right DAC volume */ 57 { 12, 0x000F }, /* R12 - Bass control */ [all …]
|
/openbmc/linux/arch/arm64/boot/dts/rockchip/ |
H A D | rk3566-soquartz-model-a.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 /dts-v1/; 5 #include "rk3566-soquartz.dtsi" 9 compatible = "pine64,soquartz-model-a", "pine64,soquartz", "rockchip,rk3566"; 12 vcc12v_dcin: vcc12v-dcin-regulator { 13 compatible = "regulator-fixed"; 14 regulator-name = "vcc12v_dcin"; 15 regulator-always-on; 16 regulator-boot-on; 17 regulator-min-microvolt = <12000000>; [all …]
|
H A D | rk3588-edgeble-neu6a.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 compatible = "edgeble,neural-compute-module-6a", "rockchip,rk3588"; 13 vcc12v_dcin: vcc12v-dcin-regulator { 14 compatible = "regulator-fixed"; 15 regulator-name = "vcc12v_dcin"; 16 regulator-always-on; 17 regulator-boot-on; 18 regulator-min-microvolt = <12000000>; 19 regulator-max-microvolt = <12000000>; 24 bus-width = <8>; [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/regulator/ |
H A D | mp8859.txt | 4 - compatible: "mps,mp8859"; 5 - reg: I2C slave address. 16 regulator-name = "dc_12v"; 17 regulator-min-microvolt = <12000000>; 18 regulator-max-microvolt = <12000000>; 19 regulator-boot-on; 20 regulator-always-on;
|
/openbmc/linux/Documentation/devicetree/bindings/hwmon/ |
H A D | max6650.txt | 4 [1] https://datasheets.maximintegrated.com/en/ds/MAX6650-MAX6651.pdf 7 - compatible : One of "maxim,max6650" or "maxim,max6651" 8 - reg : I2C address, one of 0x1b, 0x1f, 0x4b, 0x48. 11 - maxim,fan-microvolt : The supply voltage of the fan, either 5000000 uV or 12 12000000 uV. 13 - maxim,fan-prescale : Pre-scaling value, as per datasheet [1]. Lower values 14 allow more fine-grained control of slower fans. 16 - maxim,fan-target-rpm: Initial requested fan rotation speed. If specified, the 17 driver selects closed-loop mode and the requested speed. 22 fan-max6650: max6650@1b { [all …]
|
/openbmc/u-boot/board/boundary/nitrogen6x/ |
H A D | 6x_upgrade.txt | 2 echo "check U-Boot" ; 4 if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk}:1 12000000 u-boot… 11 echo "------- U-Boot versions match" ; 13 echo "Need U-Boot upgrade" ; 27 while echo "---- U-Boot upgraded. reset" ; do 34 echo "Error re-reading EEPROM" ; 44 echo "No U-Boot image found on SD card" ;
|
/openbmc/u-boot/arch/arm/include/asm/arch-omap3/ |
H A D | clock.h | 1 /* SPDX-License-Identifier: GPL-2.0+ */ 3 * (C) Copyright 2006-2008 5 * Richard Woodruff <r-woodruff2@ti.com> 10 #define LDELAY 12000000 12 #define S12M 12000000
|
/openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx6ull-tarragon-slavext.dts | 1 // SPDX-License-Identifier: GPL-2.0 OR MIT 5 #include "imx6ull-tarragon-common.dtsi" 9 compatible = "chargebyte,imx6ull-tarragon-slavext", "fsl,imx6ull"; 11 fan0: pwm-fan { 12 compatible = "pwm-fan"; 14 pinctrl-names = "default"; 15 pinctrl-0 = <&pinctrl_fan_sense_snvs>; 16 fan-supply = <®_fan>; 17 interrupt-parent = <&gpio5>; 22 compatible = "regulator-fixed"; [all …]
|
/openbmc/linux/arch/arm64/boot/dts/arm/ |
H A D | corstone1000-fvp.dts | 1 // SPDX-License-Identifier: GPL-2.0 OR MIT 8 /dts-v1/; 14 compatible = "arm,corstone1000-fvp"; 19 phy-mode = "mii"; 21 reg-io-width = <2>; 25 compatible = "regulator-fixed"; 26 regulator-name = "vmmc_supply"; 27 regulator-min-microvolt = <3300000>; 28 regulator-max-microvolt = <3300000>; 29 regulator-always-on; [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/iio/addac/ |
H A D | adi,ad74115.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Cosmin Tanislav <cosmin.tanislav@analog.com> 13 The AD74115H is a single-channel software configurable input/output 17 chip solution with an SPI interface. The device features a 16-bit ADC and a 18 14-bit DAC. 25 - adi,ad74115h 30 spi-max-frequency: 33 spi-cpol: true [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/usb/ |
H A D | octeon-usb.txt | 7 - compatible: must be "cavium,octeon-5750-usbn" 9 - reg: specifies the physical base address of the USBN block and 12 - #address-cells: specifies the number of cells needed to encode an 15 - #size-cells: specifies the number of cells used to represent the size 18 - ranges: specifies the translation between child address space and parent 21 - clock-frequency: speed of the USB reference clock. Allowed values are 22 12000000, 24000000 or 48000000. 24 - cavium,refclk-type: type of the USB reference clock. Allowed values are 27 - refclk-frequency: deprecated, use "clock-frequency". 29 - refclk-type: deprecated, use "cavium,refclk-type". [all …]
|