ARM64: dts: meson-gxl: Add CEC pins nodes

Add the AO and EE domain CEC pins nodes for the Amlogic Meson GXL SoCs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman

ARM64: dts: meson-gxl: Add CEC pins nodes

Add the AO and EE domain CEC pins nodes for the Amlogic Meson GXL SoCs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: Fix GXL periphs pinctrl pull-enable register base

The pull-enable register base was wrongly copied from the GXBB pinctrl node,
but was not used yet.

Fixes: fb0fe92294a9 ("ARM64: dts: me

ARM64: dts: Fix GXL periphs pinctrl pull-enable register base

The pull-enable register base was wrongly copied from the GXBB pinctrl node,
but was not used yet.

Fixes: fb0fe92294a9 ("ARM64: dts: meson-gxl: Add pinctrl nodes")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges

The gpio-range was badly added on the GXL dtsi, the AO pin count is 10
instead of 14.

Fixes: 84412e4e857f ("ARM64: dts: meson-gxl: Add gpio-ra

ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges

The gpio-range was badly added on the GXL dtsi, the AO pin count is 10
instead of 14.

Fixes: 84412e4e857f ("ARM64: dts: meson-gxl: Add gpio-ranges properties")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

arm64: dts: meson-gxl: Fix node order

Sort nodes referenced by label alphabetically.

Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

ARM64: dts: meson-gx: Add support for HDMI output

Add HDMI output and connector nodes.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

ARM64: dts: meson-gxl: add spdif output pins

Add EE and AO domains pins for the spdif output to the gxl device tree.

Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbru

ARM64: dts: meson-gxl: add spdif output pins

Add EE and AO domains pins for the spdif output to the gxl device tree.

Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-gxl: add i2s output pins

Add EE and AO domains pins for the i2s output clocks and data the gxl
device tree

Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brun

ARM64: dts: meson-gxl: add i2s output pins

Add EE and AO domains pins for the i2s output clocks and data the gxl
device tree

Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-gxl: Add gpio-ranges properties

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@b

ARM64: dts: meson-gxl: Add gpio-ranges properties

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-gxl: Add missing pinctrl pins groups

Add pinctrl pins nodes following the additions of missing pins in the pinctrl
driver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

ARM64: dts: meson-gxl: Add missing pinctrl pins groups

Add pinctrl pins nodes following the additions of missing pins in the pinctrl
driver.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-gx: Finally move common nodes to GX dtsi

Since we know the GXBB and GXL/GXM share more hardware, we can safely move
the remaining peripheral nodes present in the GXBB dtsi to the c

ARM64: dts: meson-gx: Finally move common nodes to GX dtsi

Since we know the GXBB and GXL/GXM share more hardware, we can safely move
the remaining peripheral nodes present in the GXBB dtsi to the common GX dtsi.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: amlogic: meson-gxl: add the missing PWM pins

This adds the new DT nodes for the missing PWM pins in the EE and AO
domain.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlem

ARM64: dts: amlogic: meson-gxl: add the missing PWM pins

This adds the new DT nodes for the missing PWM pins in the EE and AO
domain.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson: meson-gx: add the SAR ADC

Add the SAR ADC to meson-gxbb.dtsi and meson-gxl.dtsi. GXBB provides a
10-bit ADC while GXL and GXM provide a 12-bit ADC.
Some boards use resistor ladder

ARM64: dts: meson: meson-gx: add the SAR ADC

Add the SAR ADC to meson-gxbb.dtsi and meson-gxl.dtsi. GXBB provides a
10-bit ADC while GXL and GXM provide a 12-bit ADC.
Some boards use resistor ladder buttons connected through one of the ADC
channels. On newer devices (GXL and GXM) some boards use pull-ups/downs
to change the resistance (and thus the ADC value) on one of the ADC
channels to indicate the board revision.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-gxl: add the pwm_ao_b pin

This adds the pwm_ao_b pin to allow boards which have an LED connected
to GPIOAO_9 to use the leds-pwm driver (by activating the pwm_AO_ab node
and passin

ARM64: dts: meson-gxl: add the pwm_ao_b pin

This adds the pwm_ao_b pin to allow boards which have an LED connected
to GPIOAO_9 to use the leds-pwm driver (by activating the pwm_AO_ab node
and passing the pwm_ao_b_pin pinctrl-reference).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes

Add pinctrl nodes for HDMI HPD and DDC pins modes for Amlogic Meson GXL
and GXBB SoCs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
A

ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes

Add pinctrl nodes for HDMI HPD and DDC pins modes for Amlogic Meson GXL
and GXBB SoCs.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-gx: add the serial CTS and RTS pin groups

This adds pinctrl group nodes for the CTS and RTS pins of each serial
controller. This makes it possible to enable the CTS and RTS pins wh

ARM64: dts: meson-gx: add the serial CTS and RTS pin groups

This adds pinctrl group nodes for the CTS and RTS pins of each serial
controller. This makes it possible to enable the CTS and RTS pins which
are controlled by the serial controller hardware (through the meson_uart
driver).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-gx: add the missing uart_AO_B

This adds the missing node for the uart_AO_B port to the meson-gx.dtsi
(as this is supported by GXBB, GXL and GXM) along with the required
pinctrl pin

ARM64: dts: meson-gx: add the missing uart_AO_B

This adds the missing node for the uart_AO_B port to the meson-gx.dtsi
(as this is supported by GXBB, GXL and GXM) along with the required
pinctrl pins. This is required as some boards are using it (the boards
from the Khadas VIM series for example have it exposed on the pin
headers).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-gx: Add Graphic Controller nodes

Add Video Processing Unit and CVBS Output nodes, and enable CVBS on selected
boards.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.

ARM64: dts: meson-gx: Add Graphic Controller nodes

Add Video Processing Unit and CVBS Output nodes, and enable CVBS on selected
boards.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-gxl: fix GPIO include

Signed-off-by: Kevin Hilman <khilman@baylibre.com>

ARM64: dts: meson-gxl: Add ethernet nodes with internal PHY

Add Ethernet node with Internal PHY selection for the Amlogic GXL SoCs

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off

ARM64: dts: meson-gxl: Add ethernet nodes with internal PHY

Add Ethernet node with Internal PHY selection for the Amlogic GXL SoCs

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-gxl: Add MMC/SD/SDIO nodes

Add MMC/SD/SDIO nodes clock attributes for Amlogic Meson GXL.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilm

ARM64: dts: meson-gxl: Add MMC/SD/SDIO nodes

Add MMC/SD/SDIO nodes clock attributes for Amlogic Meson GXL.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-gxl: Add i2c nodes

Add i2c nodes clock attributes for Amlogic Meson GXL.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

ARM64: dts: meson-gxl: Add clock nodes

Add clock node for Amlogic Meson GXL.
The GXBB compatible is retained since the GXBB clock tree is used for now.

Signed-off-by: Neil Armstrong <narmstrong@bay

ARM64: dts: meson-gxl: Add clock nodes

Add clock node for Amlogic Meson GXL.
The GXBB compatible is retained since the GXBB clock tree is used for now.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-gxl: Add pinctrl nodes

Add pinctrl nodes and pin definitions for Amlogic Meson GXL.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[khilman: use GXBB include until GXL pi

ARM64: dts: meson-gxl: Add pinctrl nodes

Add pinctrl nodes and pin definitions for Amlogic Meson GXL.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
[khilman: use GXBB include until GXL pinctrl support merged]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: amlogic: Add basic support for Amlogic S905X

This patch introduces the basic support for the Amlogic S905X (Meson
GXL) and for the Amlogic evaluation board P212.
No documentation has bee

ARM64: dts: amlogic: Add basic support for Amlogic S905X

This patch introduces the basic support for the Amlogic S905X (Meson
GXL) and for the Amlogic evaluation board P212.
No documentation has been released yet for this SoC, so for now only the
bare minimum has been added in the DT.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...