Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17 |
|
#
51dce24b |
| 26-Apr-2018 |
Jeff Kirsher <jeffrey.t.kirsher@intel.com> |
net: intel: Cleanup the copyright/license headers
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the adve
net: intel: Cleanup the copyright/license headers
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier.
Also caught a few files missing the SPDX license identifier, so fixed them up.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.16, v4.15 |
|
#
5ba643c6 |
| 04-Dec-2017 |
Tony Nguyen <anthony.l.nguyen@intel.com> |
ixgbe: Fix kernel-doc format warnings
Recent checks added for formatting kernel-doc comments are causing warnings if W= is run with a non-zero value. This patch fixes function comments to resolve w
ixgbe: Fix kernel-doc format warnings
Recent checks added for formatting kernel-doc comments are causing warnings if W= is run with a non-zero value. This patch fixes function comments to resolve warnings when W=1 is used.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8 |
|
#
b4f47a48 |
| 13-Apr-2016 |
Jacob Keller <jacob.e.keller@intel.com> |
ixgbe: use BIT() macro
Several areas of ixgbe were written before widespread usage of the BIT(n) macro. With the impending release of GCC 6 and its associated new warnings, some usages such as (1 <<
ixgbe: use BIT() macro
Several areas of ixgbe were written before widespread usage of the BIT(n) macro. With the impending release of GCC 6 and its associated new warnings, some usages such as (1 << 31) have been noted within the ixgbe driver source. Fix these wholesale and prevent future issues by simply using BIT macro instead of hand coded bit shifts.
Also fix a few shifts that are shifting values into place by using the 'u' prefix to indicate unsigned. It doesn't strictly matter in these cases because we're not shifting by too large a value, but these are all unsigned values and should be indicated as such.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1 |
|
#
cb78cf12 |
| 23-Nov-2015 |
Vasu Dev <vasu.dev@intel.com> |
ixgbe: fix broken PFC with X550
PFC is configuration is skipped for X550 devices due to a incorrect device id check, fixing that to include X550 PFC configuration.
Signed-off-by: Vasu Dev <vasu.dev
ixgbe: fix broken PFC with X550
PFC is configuration is skipped for X550 devices due to a incorrect device id check, fixing that to include X550 PFC configuration.
Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6 |
|
#
bc1fc64f |
| 08-Aug-2015 |
Mark Rustad <mark.d.rustad@intel.com> |
ixgbe: Fix FCRTH value in VM-to-VM loopback mode
The 82599 and X540 datasheets require that FCRTH be "set" for Tx switching (VM-to-VM loopback) but it did not previously specify what the value shoul
ixgbe: Fix FCRTH value in VM-to-VM loopback mode
The 82599 and X540 datasheets require that FCRTH be "set" for Tx switching (VM-to-VM loopback) but it did not previously specify what the value should be set to. It has now been determined that the correct value is RXPBSIZE - (24*1024).
This setting is also required for later devices.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1 |
|
#
e5776620 |
| 04-Apr-2014 |
Jacob Keller <jacob.e.keller@intel.com> |
ixgbe: convert low_water into an array
Since fc.high_water is an array, we should treat low_water as an array also. This allows the algorithm to output different values for different TCs, and then w
ixgbe: convert low_water into an array
Since fc.high_water is an array, we should treat low_water as an array also. This allows the algorithm to output different values for different TCs, and then we can distinguish between them. In addition, this patch changes one path that didn't honor the return value from ixgbe_setup_fc.
Reported-by: Aaron Salter <aaron.k.salter@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4 |
|
#
b89aae71 |
| 21-Feb-2014 |
Jacob Keller <jacob.e.keller@intel.com> |
ixgbe: add Linux NICS mailing list to contact info
This patch updates the contact information on the ixgbe driver files so that every file includes the Linux NICS address, as it is still used, but o
ixgbe: add Linux NICS mailing list to contact info
This patch updates the contact information on the ixgbe driver files so that every file includes the Linux NICS address, as it is still used, but only a few of the files mentioned it.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3 |
|
#
434c5e39 |
| 07-Jan-2013 |
Don Skidmore <donald.c.skidmore@intel.com> |
ixgbe: update date to 2013
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
Revision tags: v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7 |
|
#
943561d3 |
| 10-May-2012 |
Alexander Duyck <alexander.h.duyck@intel.com> |
ixgbe: Clean up priority based flow control
This change cleans up the logic in the priority based flow control configuration routines. Both the 82599 and 82598 based routines perform similar functi
ixgbe: Clean up priority based flow control
This change cleans up the logic in the priority based flow control configuration routines. Both the 82599 and 82598 based routines perform similar functions however they are both arranged completely differently. This patch goes over both of them to clean up the code.
In addition I am dropping the ixgbe_fc_pfc flow control mode and instead just replacing it with checks for if priority flow control is enabled. This allows us to maintain some of the link flow control information which allows for an easier transition between link and priority flow control.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: v3.4-rc6, v3.4-rc5, v3.4-rc4 |
|
#
041441d0 |
| 19-Apr-2012 |
Alexander Duyck <alexander.h.duyck@intel.com> |
ixgbe: Update link flow control to correctly handle multiple packet buffer DCB
This change updates the link flow control configuration so that we correctly set the link flow control settings for DCB
ixgbe: Update link flow control to correctly handle multiple packet buffer DCB
This change updates the link flow control configuration so that we correctly set the link flow control settings for DCB. Previously we would have to call the fc_enable call 8 times, once for each packet buffer. If we move that logic into the fc_enable call itself we can avoid multiple unnecessary register writes.
This change also corrects an issue in which we were only shifting the water marks for 82599 parts by 6 instead of 10. This was resulting in us only using 1/16 of the packet buffer when flow control was enabled.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1 |
|
#
94971820 |
| 05-Jan-2012 |
Don Skidmore <donald.c.skidmore@intel.com> |
ixgbe: update copyright to 2012
New year so bump the copyright date.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: J
ixgbe: update copyright to 2012
New year so bump the copyright date.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5, v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10, v3.1-rc9, v3.1-rc8, v3.1-rc7 |
|
#
6b8456c0 |
| 21-Sep-2011 |
John Fastabend <john.r.fastabend@intel.com> |
ixgbe: X540 devices RX PFC frames pause traffic even if disabled
Receiving PFC (priority flow control) frames while the feature is off should not pause the traffic class. On the X540 devices the tra
ixgbe: X540 devices RX PFC frames pause traffic even if disabled
Receiving PFC (priority flow control) frames while the feature is off should not pause the traffic class. On the X540 devices the traffic class react to frames if it was previously enabled because the field is incorrectly cleared.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
#
32701dc2 |
| 26-Sep-2011 |
John Fastabend <john.r.fastabend@intel.com> |
ixgbe: fixup hard dependencies on supporting 8 traffic classes
This patch correctly configures DCB when less than 8 traffic classes are available in hardware.
Signed-off-by: John Fastabend <john.r.
ixgbe: fixup hard dependencies on supporting 8 traffic classes
This patch correctly configures DCB when less than 8 traffic classes are available in hardware.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: v3.1-rc6, v3.1-rc5, v3.1-rc4 |
|
#
9da712d2 |
| 22-Aug-2011 |
John Fastabend <john.r.fastabend@intel.com> |
ixgbe: update {P}FC thresholds to account for X540 and loopback
Revise high and low threshold marks wrt flow control to account for the X540 devices and latency introduced by the loopback switch.
W
ixgbe: update {P}FC thresholds to account for X540 and loopback
Revise high and low threshold marks wrt flow control to account for the X540 devices and latency introduced by the loopback switch.
Without this it was in theory possible to drop frames on a supposedly lossless link with X540 or SR-IOV enabled.
Previously we used a magic number in a define to calculate the threshold values. This made it difficult to sort out exactly which latencies were or were not being accounted for. Here I was overly explicit and tried to used #define names that would be recognizable after reading the IEEE 802.1Qbb specification.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0 |
|
#
634cdca5 |
| 21-Jul-2011 |
John Fastabend <john.r.fastabend@intel.com> |
ixgbe: PFC not cleared on X540 devices
X540 devices do not clear PFC before sets. This results in the device possibly responding to PFC frames that the user has disabled. Although it would also be w
ixgbe: PFC not cleared on X540 devices
X540 devices do not clear PFC before sets. This results in the device possibly responding to PFC frames that the user has disabled. Although it would also be wrong for the peer to be transmitting these frames. Now we clear the register before set.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3, v3.0-rc2, v3.0-rc1, v2.6.39, v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3 |
|
#
dee1ad47 |
| 07-Apr-2011 |
Jeff Kirsher <jeffrey.t.kirsher@intel.com> |
intel: Move the Intel wired LAN drivers
Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and the necessary Kconfig and Makefile changes.
Signed-off-by: Jeff Kirsher <jeffrey.t.kir
intel: Move the Intel wired LAN drivers
Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and the necessary Kconfig and Makefile changes.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17 |
|
#
51dce24b |
| 26-Apr-2018 |
Jeff Kirsher <jeffrey.t.kirsher@intel.com> |
net: intel: Cleanup the copyright/license headers After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line w
net: intel: Cleanup the copyright/license headers After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier. Also caught a few files missing the SPDX license identifier, so fixed them up. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.16, v4.15 |
|
#
5ba643c6 |
| 04-Dec-2017 |
Tony Nguyen <anthony.l.nguyen@intel.com> |
ixgbe: Fix kernel-doc format warnings Recent checks added for formatting kernel-doc comments are causing warnings if W= is run with a non-zero value. This patch fixes function comments
ixgbe: Fix kernel-doc format warnings Recent checks added for formatting kernel-doc comments are causing warnings if W= is run with a non-zero value. This patch fixes function comments to resolve warnings when W=1 is used. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8 |
|
#
b4f47a48 |
| 13-Apr-2016 |
Jacob Keller <jacob.e.keller@intel.com> |
ixgbe: use BIT() macro Several areas of ixgbe were written before widespread usage of the BIT(n) macro. With the impending release of GCC 6 and its associated new warnings, some usag
ixgbe: use BIT() macro Several areas of ixgbe were written before widespread usage of the BIT(n) macro. With the impending release of GCC 6 and its associated new warnings, some usages such as (1 << 31) have been noted within the ixgbe driver source. Fix these wholesale and prevent future issues by simply using BIT macro instead of hand coded bit shifts. Also fix a few shifts that are shifting values into place by using the 'u' prefix to indicate unsigned. It doesn't strictly matter in these cases because we're not shifting by too large a value, but these are all unsigned values and should be indicated as such. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1 |
|
#
cb78cf12 |
| 23-Nov-2015 |
Vasu Dev <vasu.dev@intel.com> |
ixgbe: fix broken PFC with X550 PFC is configuration is skipped for X550 devices due to a incorrect device id check, fixing that to include X550 PFC configuration. Signed-off-by
ixgbe: fix broken PFC with X550 PFC is configuration is skipped for X550 devices due to a incorrect device id check, fixing that to include X550 PFC configuration. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6 |
|
#
bc1fc64f |
| 08-Aug-2015 |
Mark Rustad <mark.d.rustad@intel.com> |
ixgbe: Fix FCRTH value in VM-to-VM loopback mode The 82599 and X540 datasheets require that FCRTH be "set" for Tx switching (VM-to-VM loopback) but it did not previously specify what
ixgbe: Fix FCRTH value in VM-to-VM loopback mode The 82599 and X540 datasheets require that FCRTH be "set" for Tx switching (VM-to-VM loopback) but it did not previously specify what the value should be set to. It has now been determined that the correct value is RXPBSIZE - (24*1024). This setting is also required for later devices. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1 |
|
#
e5776620 |
| 04-Apr-2014 |
Jacob Keller <jacob.e.keller@intel.com> |
ixgbe: convert low_water into an array Since fc.high_water is an array, we should treat low_water as an array also. This allows the algorithm to output different values for different
ixgbe: convert low_water into an array Since fc.high_water is an array, we should treat low_water as an array also. This allows the algorithm to output different values for different TCs, and then we can distinguish between them. In addition, this patch changes one path that didn't honor the return value from ixgbe_setup_fc. Reported-by: Aaron Salter <aaron.k.salter@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4 |
|
#
b89aae71 |
| 21-Feb-2014 |
Jacob Keller <jacob.e.keller@intel.com> |
ixgbe: add Linux NICS mailing list to contact info This patch updates the contact information on the ixgbe driver files so that every file includes the Linux NICS address, as it is still
ixgbe: add Linux NICS mailing list to contact info This patch updates the contact information on the ixgbe driver files so that every file includes the Linux NICS address, as it is still used, but only a few of the files mentioned it. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3 |
|
#
434c5e39 |
| 07-Jan-2013 |
Don Skidmore <donald.c.skidmore@intel.com> |
ixgbe: update date to 2013 Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirs
ixgbe: update date to 2013 Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|
Revision tags: v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7 |
|
#
943561d3 |
| 10-May-2012 |
Alexander Duyck <alexander.h.duyck@intel.com> |
ixgbe: Clean up priority based flow control This change cleans up the logic in the priority based flow control configuration routines. Both the 82599 and 82598 based routines perform
ixgbe: Clean up priority based flow control This change cleans up the logic in the priority based flow control configuration routines. Both the 82599 and 82598 based routines perform similar functions however they are both arranged completely differently. This patch goes over both of them to clean up the code. In addition I am dropping the ixgbe_fc_pfc flow control mode and instead just replacing it with checks for if priority flow control is enabled. This allows us to maintain some of the link flow control information which allows for an easier transition between link and priority flow control. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
show more ...
|