Merge branch 'fixes' into next

mmc: sdhci_am654: Fix Command Queuing in AM65x

Command Queuing was enabled completely for J721e controllers which lead
to partial enablement even for Am65x. Complete CQ implementation fo

mmc: sdhci_am654: Fix Command Queuing in AM65x

Command Queuing was enabled completely for J721e controllers which lead
to partial enablement even for Am65x. Complete CQ implementation for
AM65x by adding the irq callback.

Fixes: f545702b74f9 ("mmc: sdhci_am654: Add Support for Command Queuing Engine to J721E")
Cc: stable@vger.kernel.org
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200108143301.1929-4-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci_am654: Reset Command and Data line after tuning

The tuning data is leftover in the buffer after tuning. This can cause
issues in future data commands, especially with CQHCI. R

mmc: sdhci_am654: Reset Command and Data line after tuning

The tuning data is leftover in the buffer after tuning. This can cause
issues in future data commands, especially with CQHCI. Reset the command
and data lines after tuning to continue from a clean state.

Fixes: 41fd4caeb00b ("mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200108143301.1929-3-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci_am654: Remove Inverted Write Protect flag

The MMC/SD controllers on am65x and j721e don't in fact detect the write
protect line as inverted. No issues were detected because of

mmc: sdhci_am654: Remove Inverted Write Protect flag

The MMC/SD controllers on am65x and j721e don't in fact detect the write
protect line as inverted. No issues were detected because of this
because the sdwp line is not connected on any of the evms. Fix this by
removing the flag.

Fixes: 1accbced1c32 ("mmc: sdhci_am654: Add Support for 4 bit IP on J721E")
Cc: stable@vger.kernel.org
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200108143301.1929-2-faiz_abbas@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci_am654: convert to devm_platform_ioremap_resource

Use devm_platform_ioremap_resource() to simplify code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Link: https:

mmc: sdhci_am654: convert to devm_platform_ioremap_resource

Use devm_platform_ioremap_resource() to simplify code.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Link: https://lore.kernel.org/r/20191215175120.3290-8-tiny.windzz@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci_am654: Add Support for Command Queuing Engine to J721E

Add Support for CQHCI (Command Queuing Host Controller Interface)
for each of the host controllers present in TI's J721E

mmc: sdhci_am654: Add Support for Command Queuing Engine to J721E

Add Support for CQHCI (Command Queuing Host Controller Interface)
for each of the host controllers present in TI's J721E devices.
Add cqhci_ops and a .irq() callback to handle cqhci specific interrupts.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci_am654: Make some symbols static

Fix sparse warnings:

drivers/mmc/host/sdhci_am654.c:192:6: warning: symbol 'sdhci_j721e_4bit_set_clock' was not declared. Should it be sta

mmc: sdhci_am654: Make some symbols static

Fix sparse warnings:

drivers/mmc/host/sdhci_am654.c:192:6: warning: symbol 'sdhci_j721e_4bit_set_clock' was not declared. Should it be static?
drivers/mmc/host/sdhci_am654.c:261:18: warning: symbol 'sdhci_j721e_8bit_ops' was not declared. Should it be static?
drivers/mmc/host/sdhci_am654.c:284:18: warning: symbol 'sdhci_j721e_4bit_ops' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci_am654: Add Support for 4 bit IP on J721E

Add support for 4 bit instances on TI's J721E devices. Because these
instances have no DLL, introduce a DLL_PRESENT flag and make sure

mmc: sdhci_am654: Add Support for 4 bit IP on J721E

Add support for 4 bit instances on TI's J721E devices. Because these
instances have no DLL, introduce a DLL_PRESENT flag and make sure DLL
related registers are only accessed when it is present. Also add a
separate set_clock callback for this compatible.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci_am654: Add Support for 8 bit IP on J721E

The 8 bit IP on the TI's J721E device departs from the AM654x IP in some
ways which require special handling. Create a driver_data str

mmc: sdhci_am654: Add Support for 8 bit IP on J721E

The 8 bit IP on the TI's J721E device departs from the AM654x IP in some
ways which require special handling. Create a driver_data structure
which holds the pltfm_data and a flags field which is used to indicate
these differences. These are the following:

1. The pins are not muxed with anything else inside the SoC and hence the
IOMUX_ENABLE field does not exist. Add a flag which is used to
indicate the presence of the field.

2. The register field used to select DLL frequency is 3 bit wide as
compared to 2 bits in AM65x. Add another flag which differentiates
between 3 bit and 2 bit fields.

3. The strobe select field is 8 bit wide as compared to 4 bits for
AM65x. Add yet another flag to indicate this difference. Strobe select
is used only for HS400 speed mode, support for which has not yet been
added in AM65x.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci_am654: Print error message if the DLL fails to lock

Print an error message and return if DLL fails to lock.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-b

mmc: sdhci_am654: Print error message if the DLL fails to lock

Print an error message and return if DLL fails to lock.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci_am654: Improve whitespace utilisation with regmap_*() calls

Line wrapping with the regmap_*() functions is way more conservative
than required by the 80 character rule. Expand

mmc: sdhci_am654: Improve whitespace utilisation with regmap_*() calls

Line wrapping with the regmap_*() functions is way more conservative
than required by the 80 character rule. Expand the function calls out to
use less number of lines.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci_am654: Fix SLOTTYPE write

In the call to regmap_update_bits() for SLOTTYPE, the mask and value
fields are exchanged. Fix this.

Signed-off-by: Faiz Abbas <faiz_abbas@t

mmc: sdhci_am654: Fix SLOTTYPE write

In the call to regmap_update_bits() for SLOTTYPE, the mask and value
fields are exchanged. Fix this.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Fixes: 41fd4caeb00b ("mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci_am654: Clear HISPD_ENA in some lower speed modes

According to the AM654x Data Manual[1], the setup timing in lower speed
modes can only be met if the controller uses a falling

mmc: sdhci_am654: Clear HISPD_ENA in some lower speed modes

According to the AM654x Data Manual[1], the setup timing in lower speed
modes can only be met if the controller uses a falling edge data launch.

To ensure this, the HIGH_SPEED_ENA (HOST_CONTROL[2]) bit should be
cleared in default speed, SD high speed, MMC high speed, SDR12 and SDR25
speed modes.

Use the sdhci writeb callback to implement this condition.

[1] http://www.ti.com/lit/gpn/am6546 Section 5.10.5.16.1

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci_am654: Make symbol 'sdhci_am654_ops' static

Fixes the following sparse warning:

drivers/mmc/host/sdhci_am654.c:161:18: warning:
symbol 'sdhci_am654_ops' was not decl

mmc: sdhci_am654: Make symbol 'sdhci_am654_ops' static

Fixes the following sparse warning:

drivers/mmc/host/sdhci_am654.c:161:18: warning:
symbol 'sdhci_am654_ops' was not declared. Should it be static?

Fixes: aff88ff23512 ("mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver

The host controllers on TI's AM654 SOCs are not compatible with
the phy and consumer model of the sdhci-of-arasan driver. It

mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver

The host controllers on TI's AM654 SOCs are not compatible with
the phy and consumer model of the sdhci-of-arasan driver. It turns out
that for optimal operation at higher speeds, a special tuning procedure
needs to be implemented which involves configuration of platform
specific phy registers.

Therefore, branch out to a new sdhci_am654 driver and add the phy
register space with all phy configurations to it. Populate AM654
specific callbacks to sdhci_ops and add SDHCI_QUIRKS wherever
applicable.

Only add support for upto High Speed for SD card and upto DDR52 speed
mode for eMMC. Higher speeds will be added in subsequent patches.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...