media: i2c: imx290: Fix IMX920 typo

[ Upstream commit 6fc62efa266b0918c7b226f45c2eccfcf99a6d8e ]

Replace IMX920 by IMX290.

Fixes: b4ab57b07c5b9 ("media: i2c: imx290: Add crop selection targets sup

media: i2c: imx290: Fix IMX920 typo

[ Upstream commit 6fc62efa266b0918c7b226f45c2eccfcf99a6d8e ]

Replace IMX920 by IMX290.

Fixes: b4ab57b07c5b9 ("media: i2c: imx290: Add crop selection targets support")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

media: i2c: imx290: Properly encode registers as little-endian

[ Upstream commit 60fc87a69523c294eb23a1316af922f6665a6f8c ]

The conversion to CCI also converted the multi-byte register access to
bi

media: i2c: imx290: Properly encode registers as little-endian

[ Upstream commit 60fc87a69523c294eb23a1316af922f6665a6f8c ]

The conversion to CCI also converted the multi-byte register access to
big-endian. Correct the register definition by using the correct
little-endian ones.

Fixes: af73323b9770 ("media: imx290: Convert to new CCI register access helpers")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Fixed the Fixes: tag.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

media: imx290: Convert to new CCI register access helpers

Use the new comon CCI register access helpers to replace the private
register access helpers in the imx290 driver.

[Sakari Ailus: Squashed

media: imx290: Convert to new CCI register access helpers

Use the new comon CCI register access helpers to replace the private
register access helpers in the imx290 driver.

[Sakari Ailus: Squashed the patch to address a merge issue in Kconfig]

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that m

media: Explicitly include correct DT includes

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: i2c: imx290: drop format param from imx290_ctrl_update

The format param actually is not used in imx290_ctrl_update
function, let's drop this

Fixes: bc35f9a21a55 ("media: i2c: imx290: Fix the

media: i2c: imx290: drop format param from imx290_ctrl_update

The format param actually is not used in imx290_ctrl_update
function, let's drop this

Fixes: bc35f9a21a55 ("media: i2c: imx290: Fix the pixel rate at 148.5Mpix/s")
Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f

media: Switch i2c drivers back to use .probe()

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: i2c: imx290: Add missing \n on dev_err_probe() message

Also dev_err_probe message require a trailing \n.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent

media: i2c: imx290: Add missing \n on dev_err_probe() message

Also dev_err_probe message require a trailing \n.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>

show more ...

media: i2c: imx290: fix conditional function defintions

The runtime suspend/resume functions are only referenced from the
dev_pm_ops, but they use the old SET_RUNTIME_PM_OPS() helper that
requires a

media: i2c: imx290: fix conditional function defintions

The runtime suspend/resume functions are only referenced from the
dev_pm_ops, but they use the old SET_RUNTIME_PM_OPS() helper that
requires a __maybe_unused annotation to avoid a warning:

drivers/media/i2c/imx290.c:1082:12: error: unused function 'imx290_runtime_resume' [-Werror,-Wunused-function]
static int imx290_runtime_resume(struct device *dev)
^
drivers/media/i2c/imx290.c:1090:12: error: unused function 'imx290_runtime_suspend' [-Werror,-Wunused-function]
static int imx290_runtime_suspend(struct device *dev)
^

Convert this to the new RUNTIME_PM_OPS() helper that so this is not
required. To improve this further, also use the pm_ptr() helper that
lets the dev_pm_ops get dropped entirely when CONFIG_PM is disabled.

A related mistake happened in the of_match_ptr() macro here, which like
SET_RUNTIME_PM_OPS() requires the match table to be marked as
__maybe_unused, though I could not reproduce building this without
CONFIG_OF. Remove the of_match_ptr() here as there is no point in
dropping the match table in configurations without CONFIG_OF.

Fixes: 02852c01f654 ("media: i2c: imx290: Initialize runtime PM before subdev")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

media: i2c: imx290: Add support for imx327 variant

Both sensors are quite similar. Their specs only differ regarding LVDS
and parallel output but are identical regarding MIPI-CSI-2 interface.
But th

media: i2c: imx290: Add support for imx327 variant

Both sensors are quite similar. Their specs only differ regarding LVDS
and parallel output but are identical regarding MIPI-CSI-2 interface.
But they use a different init setting of hard-coded values, taken from
the datasheet.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: imx290: Add the error code to logs in start_streaming

imx290_start_streaming logs what failed, but not the error
code from that function. Add it into the log message.

Signed-off-by: Dav

media: i2c: imx290: Add the error code to logs in start_streaming

imx290_start_streaming logs what failed, but not the error
code from that function. Add it into the log message.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: imx290: Add support for H & V Flips

The sensor supports H & V flips, so add the relevant hooks for
V4L2_CID_HFLIP and V4L2_CID_VFLIP to configure them.

Note that the Bayer order is main

media: i2c: imx290: Add support for H & V Flips

The sensor supports H & V flips, so add the relevant hooks for
V4L2_CID_HFLIP and V4L2_CID_VFLIP to configure them.

Note that the Bayer order is maintained as the readout area
shifts by 1 pixel in the appropriate direction (note the
comment about the top margin being 8 pixels whilst the bottom
margin is 9). The V4L2_SEL_TGT_CROP region is therefore
adjusted appropriately.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: imx290: Add support for 74.25MHz external clock

The sensor supports either a 37.125 or 74.25MHz external, but
the driver only supported 37.125MHz.

Add the relevant register configuratio

media: i2c: imx290: Add support for 74.25MHz external clock

The sensor supports either a 37.125 or 74.25MHz external, but
the driver only supported 37.125MHz.

Add the relevant register configuration for either clock
frequency option.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: imx290: Remove duplicated write to IMX290_CTRL_07

IMX290_CTRL_07 was written from both imx290_global_init_settings
and imx290_1080p_settings and imx290_720p_settings.

Remove it from imx

media: i2c: imx290: Remove duplicated write to IMX290_CTRL_07

IMX290_CTRL_07 was written from both imx290_global_init_settings
and imx290_1080p_settings and imx290_720p_settings.

Remove it from imx290_global_init_settings as the setting varies
based on the mode.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: imx290: VMAX is mode dependent

The default VMAX for 60fps in 720p mode is 750 according to the
datasheet, however the driver always left it at 1125 thereby stopping
60fps being achieved.

media: i2c: imx290: VMAX is mode dependent

The default VMAX for 60fps in 720p mode is 750 according to the
datasheet, however the driver always left it at 1125 thereby stopping
60fps being achieved.

Make VMAX (and therefore V4L2_CID_VBLANK) mode dependent so that 720p60
can be achieved.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: imx290: Convert V4L2_CID_VBLANK to read/write

The driver exposed V4L2_CID_VBLANK as a read only control to allow
for exposure calculations and determination of the frame rate.

Convert t

media: i2c: imx290: Convert V4L2_CID_VBLANK to read/write

The driver exposed V4L2_CID_VBLANK as a read only control to allow
for exposure calculations and determination of the frame rate.

Convert to a read/write control so that the frame rate can be
controlled.
V4L2_CID_VBLANK also sets the limits for the exposure control,
therefore exposure ranges have to be updated when vblank changes
(either via s_ctrl, or via changing mode).

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: imx290: Convert V4L2_CID_HBLANK to read/write

The driver exposed V4L2_CID_HBLANK as a read only control to allow
for exposure calculations and determination of the frame rate.

Convert t

media: i2c: imx290: Convert V4L2_CID_HBLANK to read/write

The driver exposed V4L2_CID_HBLANK as a read only control to allow
for exposure calculations and determination of the frame rate.

Convert to a read/write control so that the frame rate can be
controlled.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: imx290: Use CSI timings as per datasheet

Commit "98e0500eadb7 media: i2c: imx290: Add configurable link frequency
and pixel rate" added support for the increased link frequencies
on 2 da

media: i2c: imx290: Use CSI timings as per datasheet

Commit "98e0500eadb7 media: i2c: imx290: Add configurable link frequency
and pixel rate" added support for the increased link frequencies
on 2 data lanes, but didn't update the CSI timing registers in
accordance with the datasheet.

Use the specified settings.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: imx290: Support 60fps in 2 lane operation

Commit "97589ad61c73 media: i2c: imx290: Add support for 2 data lanes"
added support for running in two lane mode (instead of 4), but
without ch

media: i2c: imx290: Support 60fps in 2 lane operation

Commit "97589ad61c73 media: i2c: imx290: Add support for 2 data lanes"
added support for running in two lane mode (instead of 4), but
without changing the link frequency that resulted in a max of 30fps.

Commit "98e0500eadb7 media: i2c: imx290: Add configurable link frequency
and pixel rate" then doubled the link frequency when in 2 lane mode,
but didn't undo the correction for running at only 30fps, just extending
horizontal blanking instead.

Remove the 30fps limit on 2 lane by correcting the register config
in accordance with the datasheet for 60fps operation over 2 lanes.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: imx290: Fix the pixel rate at 148.5Mpix/s

The datasheet lists the link frequency changes between
1080p and 720p modes. This is correct that the link frequency
changes as measured on an o

media: i2c: imx290: Fix the pixel rate at 148.5Mpix/s

The datasheet lists the link frequency changes between
1080p and 720p modes. This is correct that the link frequency
changes as measured on an oscilloscope.

Link frequency is not necessarily the same as pixel rate.

The datasheet gives standard configurations for 1080p and 720p
modes at a number of frame rates.
Looking at the 1080p mode it gives:
HMAX = 0x898 = 2200
VMAX = 0x465 = 1125
2200 * 1125 * 60fps = 148.5MPix/s

Looking at the 720p mode it gives:
HMAX = 0xce4 = 3300
VMAX = 0x2ee = 750
3300 * 750 * 60fps = 148.5Mpix/s

This driver currently scales the pixel rate proportionally to the
link frequency, however the above shows that this is not the
correct thing to do, and currently all frame rate and exposure
calculations give incorrect results.

Correctly report the pixel rate as being 148.5MPix/s under any
mode.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: imx290: Add V4L2_SUBDEV_FL_HAS_EVENTS and subscribe hooks

Any V4L2 subdevice that implements controls and declares
V4L2_SUBDEV_FL_HAS_DEVNODE should also declare V4L2_SUBDEV_FL_HAS_EVENT

media: i2c: imx290: Add V4L2_SUBDEV_FL_HAS_EVENTS and subscribe hooks

Any V4L2 subdevice that implements controls and declares
V4L2_SUBDEV_FL_HAS_DEVNODE should also declare V4L2_SUBDEV_FL_HAS_EVENTS
and implement subscribe_event and unsubscribe_event hooks.

This driver didn't and would therefore fail v4l2-compliance
testing.

Add the relevant hooks.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: imx290: Set the colorspace fields in the format

The colorspace fields were left untouched in imx290_set_fmt
which lead to a v4l2-compliance failure.

Signed-off-by: Dave Stevenson <dave.

media: i2c: imx290: Set the colorspace fields in the format

The colorspace fields were left untouched in imx290_set_fmt
which lead to a v4l2-compliance failure.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: imx290: Match kernel coding style on whitespace

Fix up a couple of coding style issues regarding missing blank
lines after declarations, double blank lines, and incorrect
indentation.

S

media: i2c: imx290: Match kernel coding style on whitespace

Fix up a couple of coding style issues regarding missing blank
lines after declarations, double blank lines, and incorrect
indentation.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: imx290: Add support for the mono sensor variant

The IMX290 module is available as either mono or colour (Bayer).

Update the driver so that it can advertise the correct mono
formats inst

media: i2c: imx290: Add support for the mono sensor variant

The IMX290 module is available as either mono or colour (Bayer).

Update the driver so that it can advertise the correct mono
formats instead of the colour ones.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: imx290: Use device_property_read_u32() directly

No need to call fwnode_property_read_u32(dev_fwnode()), when
we have already existing helper. So use it.

Signed-off-by: Andy Shevchenko <

media: i2c: imx290: Use device_property_read_u32() directly

No need to call fwnode_property_read_u32(dev_fwnode()), when
we have already existing helper. So use it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: imx290: Make use of get_unaligned_le24(), put_unaligned_le24()

Since we have a proper endianness converters for LE 24-bit data use them.

Signed-off-by: Andy Shevchenko <andriy.shevchenk

media: i2c: imx290: Make use of get_unaligned_le24(), put_unaligned_le24()

Since we have a proper endianness converters for LE 24-bit data use them.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...