clk: socfpga: remove the setting of clk-phase for sdmmc_clk

Now that the SDMMC driver supports setting the clk-phase, we can remove
the need to do it in the clock driver.

Acked-by: Stephen Boyd <sb

clk: socfpga: remove the setting of clk-phase for sdmmc_clk

Now that the SDMMC driver supports setting the clk-phase, we can remove
the need to do it in the clock driver.

Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20221114230217.202634-5-dinguyen@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms and c

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 263 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

clk: socfpga: stratix10: add clock driver for Stratix10 platform

Add a clock driver for the Stratix10 SoC. The driver is similar to the
Cyclone5/Arria10 platforms, with the exception that this drive

clk: socfpga: stratix10: add clock driver for Stratix10 platform

Add a clock driver for the Stratix10 SoC. The driver is similar to the
Cyclone5/Arria10 platforms, with the exception that this driver only uses
one single clock binding.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: socfpga: Fix the smplsel on Arria10 and Stratix10

The smplsel bits for the SDMMC clock on Arria10 and Stratix10 platforms are
offset by 1 additional bit.

Add a new macro SYSMGR_SDMMC_CTRL_SET_

clk: socfpga: Fix the smplsel on Arria10 and Stratix10

The smplsel bits for the SDMMC clock on Arria10 and Stratix10 platforms are
offset by 1 additional bit.

Add a new macro SYSMGR_SDMMC_CTRL_SET_AS10 for usage on the Arria10 and
Stratix10 platforms.

Fixes: 5611a5ba8e54 ("clk: socfpga: update clk.h so for Arria10 platform to use")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: socfpga: Add a second parent option for the dbg_base_clk

The debug base clock can be bypassed from the main PLL to the OSC1 clock.
The bypass register is the staysoc1(0x10) register that is in

clk: socfpga: Add a second parent option for the dbg_base_clk

The debug base clock can be bypassed from the main PLL to the OSC1 clock.
The bypass register is the staysoc1(0x10) register that is in the clock
manager.

This patch adds the option to get the correct parent for the debug base
clock.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: socfpga: switch to GENMASK()

Convert the code to use GENMASK() helper instead of div_mask() macro.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Dinh Nguyen <din

clk: socfpga: switch to GENMASK()

Convert the code to use GENMASK() helper instead of div_mask() macro.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: socfpga: Remove clk.h and clkdev.h includes

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. Th

clk: socfpga: Remove clk.h and clkdev.h includes

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. The clkdev.h include isn't used either, remove
it and add in slab.h to make sure things keep compiling.

Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: socfpga: add a clock driver for the Arria 10 platform

The clocks on the Arria 10 platform is a bit different than the
Cyclone/Arria 5 platform that it should just have it's own
driver.

Signed-

clk: socfpga: add a clock driver for the Arria 10 platform

The clocks on the Arria 10 platform is a bit different than the
Cyclone/Arria 5 platform that it should just have it's own
driver.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: socfpga: update clk.h so for Arria10 platform to use

There are 5 possible parent clocks for the SoCFPGA Arria10. Move the define
SYSMGR_SDMMC_CTRL_SET and streq() to clk.h so that the Arria clo

clk: socfpga: update clk.h so for Arria10 platform to use

There are 5 possible parent clocks for the SoCFPGA Arria10. Move the define
SYSMGR_SDMMC_CTRL_SET and streq() to clk.h so that the Arria clock driver
can use.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: socfpga: add divider registers to the main pll outputs

The C0(mpu_clk), C1(main_clk), and C2(dbg_base_clk) outputs from the main
PLL go through a pre-divider before coming into the system. Thes

clk: socfpga: add divider registers to the main pll outputs

The C0(mpu_clk), C1(main_clk), and C2(dbg_base_clk) outputs from the main
PLL go through a pre-divider before coming into the system. These registers
were hidden for the CycloneV platform, but are now used for the ArriaV
platform.

This patch updates the clock driver to read the div-reg property for the
socfpga-periph-clk clocks. Also moves the div_mask define to clk.h for re-use.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>

show more ...

clk: socfpga: split clk code

Move the different kinds of clocks into their own files. The reason is to aid
readability of the code. This also goes along with the other SoC-specific
clock drivers.

T

clk: socfpga: split clk code

Move the different kinds of clocks into their own files. The reason is to aid
readability of the code. This also goes along with the other SoC-specific
clock drivers.

The split introduces new structs for the three types of clocks and uses them.
Other changes are not done to the code.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it u

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 263 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

clk: socfpga: stratix10: add clock driver for Stratix10 platform

Add a clock driver for the Stratix10 SoC. The driver is similar to the
Cyclone5/Arria10 platforms, with the exception tha

clk: socfpga: stratix10: add clock driver for Stratix10 platform

Add a clock driver for the Stratix10 SoC. The driver is similar to the
Cyclone5/Arria10 platforms, with the exception that this driver only uses
one single clock binding.

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

show more ...

clk: socfpga: Fix the smplsel on Arria10 and Stratix10

The smplsel bits for the SDMMC clock on Arria10 and Stratix10 platforms are
offset by 1 additional bit.

Add a new macro SY

clk: socfpga: Fix the smplsel on Arria10 and Stratix10

The smplsel bits for the SDMMC clock on Arria10 and Stratix10 platforms are
offset by 1 additional bit.

Add a new macro SYSMGR_SDMMC_CTRL_SET_AS10 for usage on the Arria10 and
Stratix10 platforms.

Fixes: 5611a5ba8e54 ("clk: socfpga: update clk.h so for Arria10 platform to use")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: socfpga: Add a second parent option for the dbg_base_clk

The debug base clock can be bypassed from the main PLL to the OSC1 clock.
The bypass register is the staysoc1(0x10) register

clk: socfpga: Add a second parent option for the dbg_base_clk

The debug base clock can be bypassed from the main PLL to the OSC1 clock.
The bypass register is the staysoc1(0x10) register that is in the clock
manager.

This patch adds the option to get the correct parent for the debug base
clock.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: socfpga: switch to GENMASK()

Convert the code to use GENMASK() helper instead of div_mask() macro.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-

clk: socfpga: switch to GENMASK()

Convert the code to use GENMASK() helper instead of div_mask() macro.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: socfpga: Remove clk.h and clkdev.h includes

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
pro

clk: socfpga: Remove clk.h and clkdev.h includes

Clock provider drivers generally shouldn't include clk.h because
it's the consumer API. Remove the include here because this is a
provider driver. The clkdev.h include isn't used either, remove
it and add in slab.h to make sure things keep compiling.

Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: socfpga: add a clock driver for the Arria 10 platform

The clocks on the Arria 10 platform is a bit different than the
Cyclone/Arria 5 platform that it should just have it's own

clk: socfpga: add a clock driver for the Arria 10 platform

The clocks on the Arria 10 platform is a bit different than the
Cyclone/Arria 5 platform that it should just have it's own
driver.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: socfpga: update clk.h so for Arria10 platform to use

There are 5 possible parent clocks for the SoCFPGA Arria10. Move the define
SYSMGR_SDMMC_CTRL_SET and streq() to clk.h so that t

clk: socfpga: update clk.h so for Arria10 platform to use

There are 5 possible parent clocks for the SoCFPGA Arria10. Move the define
SYSMGR_SDMMC_CTRL_SET and streq() to clk.h so that the Arria clock driver
can use.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...

clk: socfpga: add divider registers to the main pll outputs

The C0(mpu_clk), C1(main_clk), and C2(dbg_base_clk) outputs from the main
PLL go through a pre-divider before coming into the

clk: socfpga: add divider registers to the main pll outputs

The C0(mpu_clk), C1(main_clk), and C2(dbg_base_clk) outputs from the main
PLL go through a pre-divider before coming into the system. These registers
were hidden for the CycloneV platform, but are now used for the ArriaV
platform.

This patch updates the clock driver to read the div-reg property for the
socfpga-periph-clk clocks. Also moves the div_mask define to clk.h for re-use.

Signed-off-by: Dinh Nguyen <dinguyen@altera.com>

show more ...

clk: socfpga: split clk code

Move the different kinds of clocks into their own files. The reason is to aid
readability of the code. This also goes along with the other SoC-specific
c

clk: socfpga: split clk code

Move the different kinds of clocks into their own files. The reason is to aid
readability of the code. This also goes along with the other SoC-specific
clock drivers.

The split introduces new structs for the three types of clocks and uses them.
Other changes are not done to the code.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>

show more ...