loop: support 4k physical blocksize

When generating bootable VM images certain systems (most notably
s390x) require devices with 4k blocksize. This patch implements
a new flag 'LO_FL

loop: support 4k physical blocksize

When generating bootable VM images certain systems (most notably
s390x) require devices with 4k blocksize. This patch implements
a new flag 'LO_FLAGS_BLOCKSIZE' which will set the physical
blocksize to that of the underlying device, and allow to change
the logical blocksize for up to the physical blocksize.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

show more ...

loop: Remove unused 'bdev' argument from loop_set_capacity

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@

loop: Remove unused 'bdev' argument from loop_set_capacity

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

show more ...

Fix loop device flush before configure v3

While installing SLES-12 (based on v4.4), I found that the installer
will stall for 60+ seconds during LVM disk scan. The root cause was
de

Fix loop device flush before configure v3

While installing SLES-12 (based on v4.4), I found that the installer
will stall for 60+ seconds during LVM disk scan. The root cause was
determined to be the removal of a bound device check in loop_flush()
by commit b5dd2f6047ca ("block: loop: improve performance via blk-mq").

Restoring this check, examining ->lo_state as set by loop_set_fd()
eliminates the bad behavior.

Test method:
modprobe loop max_loop=64
dd if=/dev/zero of=disk bs=512 count=200K
for((i=0;i<4;i++))do losetup -f disk; done
mkfs.ext4 -F /dev/loop0
for((i=0;i<4;i++))do mkdir t$i; mount /dev/loop$i t$i;done
for f in `ls /dev/loop[0-9]*|sort`; do \
echo $f; dd if=$f of=/dev/null bs=512 count=1; \
done

Test output: stock patched
/dev/loop0 18.1217e-05 8.3842e-05
/dev/loop1 6.1114e-05 0.000147979
/dev/loop10 0.414701 0.000116564
/dev/loop11 0.7474 6.7942e-05
/dev/loop12 0.747986 8.9082e-05
/dev/loop13 0.746532 7.4799e-05
/dev/loop14 0.480041 9.3926e-05
/dev/loop15 1.26453 7.2522e-05

Note that from loop10 onward, the device is not mounted, yet the
stock kernel consumes several orders of magnitude more wall time
than it does for a mounted device.
(Thanks for Mike Galbraith <efault@gmx.de>, give a changelog review.)

Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: James Wang <jnwang@suse.com>
Fixes: b5dd2f6047ca ("block: loop: improve performance via blk-mq")
Signed-off-by: Jens Axboe <axboe@fb.com>

show more ...

blk-mq: update ->init_request and ->exit_request prototypes

Remove the request_idx parameter, which can't be used safely now that we
support I/O schedulers with blk-mq. Except for a sup

blk-mq: update ->init_request and ->exit_request prototypes

Remove the request_idx parameter, which can't be used safely now that we
support I/O schedulers with blk-mq. Except for a superflous check in
mtip32xx it was unused anyway.

Also pass the tag_set instead of just the driver data - this allows drivers
to avoid some code duplication in a follow on cleanup.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

show more ...

blk-mq: remove the error argument to blk_mq_complete_request

Now that all drivers that call blk_mq_complete_requests have a
->complete callback we can remove the direct call to blk_mq_en

blk-mq: remove the error argument to blk_mq_complete_request

Now that all drivers that call blk_mq_complete_requests have a
->complete callback we can remove the direct call to blk_mq_end_request,
as well as the error argument to blk_mq_complete_request.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

show more ...

loop: zero-fill bio on the submitting cpu

In thruth I've just audited which blk-mq drivers don't currently have a
complete callback, but I think this change is at least borderline useful

loop: zero-fill bio on the submitting cpu

In thruth I've just audited which blk-mq drivers don't currently have a
complete callback, but I think this change is at least borderline useful.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

show more ...

block: remove the discard_zeroes_data flag

Now that we use the proper REQ_OP_WRITE_ZEROES operation everywhere we can
kill this hack.

Signed-off-by: Christoph Hellwig <hch@lst.d

block: remove the discard_zeroes_data flag

Now that we use the proper REQ_OP_WRITE_ZEROES operation everywhere we can
kill this hack.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

show more ...

loop: implement REQ_OP_WRITE_ZEROES

It's identical to discard as hole punches will always leave us with
zeroes on reads.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Review

loop: implement REQ_OP_WRITE_ZEROES

It's identical to discard as hole punches will always leave us with
zeroes on reads.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

show more ...

blk-mq: constify struct blk_mq_ops

Constify all instances of blk_mq_ops, as they are never modified.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe

blk-mq: constify struct blk_mq_ops

Constify all instances of blk_mq_ops, as they are never modified.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

show more ...

Merge branch 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull vfs 'statx()' update from Al Viro.

This adds the new extended stat() interface that inter

Merge branch 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull vfs 'statx()' update from Al Viro.

This adds the new extended stat() interface that internally subsumes our
previous stat interfaces, and allows user mode to specify in more detail
what kind of information it wants.

It also allows for some explicit synchronization information to be
passed to the filesystem, which can be relevant for network filesystems:
is the cached value ok, or do you need open/close consistency, or what?

From David Howells.

Andreas Dilger points out that the first version of the extended statx
interface was posted June 29, 2010:

https://www.spinics.net/lists/linux-fsdevel/msg33831.html

* 'rebased-statx' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
statx: Add a system call to make enhanced file info available

show more ...

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block layer fixes from Jens Axboe:
"A collection of fixes for this merge window, either fixes for existing
issues,

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block layer fixes from Jens Axboe:
"A collection of fixes for this merge window, either fixes for existing
issues, or parts that were waiting for acks to come in. This pull
request contains:

- Allocation of nvme queues on the right node from Shaohua.

This was ready long before the merge window, but waiting on an ack
from Bjorn on the PCI bit. Now that we have that, the three patches
can go in.

- Two fixes for blk-mq-sched with nvmeof, which uses hctx specific
request allocations. This caused an oops. One part from Sagi, one
part from Omar.

- A loop partition scan deadlock fix from Omar, fixing a regression
in this merge window.

- A three-patch series from Keith, closing up a hole on clearing out
requests on shutdown/resume.

- A stable fix for nbd from Josef, fixing a leak of sockets.

- Two fixes for a regression in this window from Jan, fixing a
problem with one of his earlier patches dealing with queue vs bdi
life times.

- A fix for a regression with virtio-blk, causing an IO stall if
scheduling is used. From me.

- A fix for an io context lock ordering problem. From me"

* 'for-linus' of git://git.kernel.dk/linux-block:
block: Move bdi_unregister() to del_gendisk()
blk-mq: ensure that bd->last is always set correctly
block: don't call ioc_exit_icq() with the queue lock held for blk-mq
block: Initialize bd_bdi on inode initialization
loop: fix LO_FLAGS_PARTSCAN hang
nvme: Complete all stuck requests
blk-mq: Provide freeze queue timeout
blk-mq: Export blk_mq_freeze_queue_wait
nbd: stop leaking sockets
blk-mq: move update of tags->rqs to __blk_mq_alloc_request()
blk-mq: kill blk_mq_set_alloc_data()
blk-mq: make blk_mq_alloc_request_hctx() allocate a scheduler request
blk-mq-sched: Allocate sched reserved tags as specified in the original queue tagset
nvme: allocate nvme_queue in correct node
PCI: add an API to get node from vector
blk-mq: allocate blk_mq_tags and requests in correct node

show more ...

statx: Add a system call to make enhanced file info available

Add a system call to make extended file information available, including
file creation and some attribute flags where availa

statx: Add a system call to make enhanced file info available

Add a system call to make extended file information available, including
file creation and some attribute flags where available through the
underlying filesystem.

The getattr inode operation is altered to take two additional arguments: a
u32 request_mask and an unsigned int flags that indicate the
synchronisation mode. This change is propagated to the vfs_getattr*()
function.

Functions like vfs_stat() are now inline wrappers around new functions
vfs_statx() and vfs_statx_fd() to reduce stack usage.

========
OVERVIEW
========

The idea was initially proposed as a set of xattrs that could be retrieved
with getxattr(), but the general preference proved to be for a new syscall
with an extended stat structure.

A number of requests were gathered for features to be included. The
following have been included:

(1) Make the fields a consistent size on all arches and make them large.

(2) Spare space, request flags and information flags are provided for
future expansion.

(3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an
__s64).

(4) Creation time: The SMB protocol carries the creation time, which could
be exported by Samba, which will in turn help CIFS make use of
FS-Cache as that can be used for coherency data (stx_btime).

This is also specified in NFSv4 as a recommended attribute and could
be exported by NFSD [Steve French].

(5) Lightweight stat: Ask for just those details of interest, and allow a
netfs (such as NFS) to approximate anything not of interest, possibly
without going to the server [Trond Myklebust, Ulrich Drepper, Andreas
Dilger] (AT_STATX_DONT_SYNC).

(6) Heavyweight stat: Force a netfs to go to the server, even if it thinks
its cached attributes are up to date [Trond Myklebust]
(AT_STATX_FORCE_SYNC).

And the following have been left out for future extension:

(7) Data version number: Could be used by userspace NFS servers [Aneesh
Kumar].

Can also be used to modify fill_post_wcc() in NFSD which retrieves
i_version directly, but has just called vfs_getattr(). It could get
it from the kstat struct if it used vfs_xgetattr() instead.

(There's disagreement on the exact semantics of a single field, since
not all filesystems do this the same way).

(8) BSD stat compatibility: Including more fields from the BSD stat such
as creation time (st_btime) and inode generation number (st_gen)
[Jeremy Allison, Bernd Schubert].

(9) Inode generation number: Useful for FUSE and userspace NFS servers
[Bernd Schubert].

(This was asked for but later deemed unnecessary with the
open-by-handle capability available and caused disagreement as to
whether it's a security hole or not).

(10) Extra coherency data may be useful in making backups [Andreas Dilger].

(No particular data were offered, but things like last backup
timestamp, the data version number and the DOS archive bit would come
into this category).

(11) Allow the filesystem to indicate what it can/cannot provide: A
filesystem can now say it doesn't support a standard stat feature if
that isn't available, so if, for instance, inode numbers or UIDs don't
exist or are fabricated locally...

(This requires a separate system call - I have an fsinfo() call idea
for this).

(12) Store a 16-byte volume ID in the superblock that can be returned in
struct xstat [Steve French].

(Deferred to fsinfo).

(13) Include granularity fields in the time data to indicate the
granularity of each of the times (NFSv4 time_delta) [Steve French].

(Deferred to fsinfo).

(14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags.
Note that the Linux IOC flags are a mess and filesystems such as Ext4
define flags that aren't in linux/fs.h, so translation in the kernel
may be a necessity (or, possibly, we provide the filesystem type too).

(Some attributes are made available in stx_attributes, but the general
feeling was that the IOC flags were to ext[234]-specific and shouldn't
be exposed through statx this way).

(15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer,
Michael Kerrisk].

(Deferred, probably to fsinfo. Finding out if there's an ACL or
seclabal might require extra filesystem operations).

(16) Femtosecond-resolution timestamps [Dave Chinner].

(A __reserved field has been left in the statx_timestamp struct for
this - if there proves to be a need).

(17) A set multiple attributes syscall to go with this.

===============
NEW SYSTEM CALL
===============

The new system call is:

int ret = statx(int dfd,
const char *filename,
unsigned int flags,
unsigned int mask,
struct statx *buffer);

The dfd, filename and flags parameters indicate the file to query, in a
similar way to fstatat(). There is no equivalent of lstat() as that can be
emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is
also no equivalent of fstat() as that can be emulated by passing a NULL
filename to statx() with the fd of interest in dfd.

Whether or not statx() synchronises the attributes with the backing store
can be controlled by OR'ing a value into the flags argument (this typically
only affects network filesystems):

(1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this
respect.

(2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise
its attributes with the server - which might require data writeback to
occur to get the timestamps correct.

(3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a
network filesystem. The resulting values should be considered
approximate.

mask is a bitmask indicating the fields in struct statx that are of
interest to the caller. The user should set this to STATX_BASIC_STATS to
get the basic set returned by stat(). It should be noted that asking for
more information may entail extra I/O operations.

buffer points to the destination for the data. This must be 256 bytes in
size.

======================
MAIN ATTRIBUTES RECORD
======================

The following structures are defined in which to return the main attribute
set:

struct statx_timestamp {
__s64 tv_sec;
__s32 tv_nsec;
__s32 __reserved;
};

struct statx {
__u32 stx_mask;
__u32 stx_blksize;
__u64 stx_attributes;
__u32 stx_nlink;
__u32 stx_uid;
__u32 stx_gid;
__u16 stx_mode;
__u16 __spare0[1];
__u64 stx_ino;
__u64 stx_size;
__u64 stx_blocks;
__u64 __spare1[1];
struct statx_timestamp stx_atime;
struct statx_timestamp stx_btime;
struct statx_timestamp stx_ctime;
struct statx_timestamp stx_mtime;
__u32 stx_rdev_major;
__u32 stx_rdev_minor;
__u32 stx_dev_major;
__u32 stx_dev_minor;
__u64 __spare2[14];
};

The defined bits in request_mask and stx_mask are:

STATX_TYPE Want/got stx_mode & S_IFMT
STATX_MODE Want/got stx_mode & ~S_IFMT
STATX_NLINK Want/got stx_nlink
STATX_UID Want/got stx_uid
STATX_GID Want/got stx_gid
STATX_ATIME Want/got stx_atime{,_ns}
STATX_MTIME Want/got stx_mtime{,_ns}
STATX_CTIME Want/got stx_ctime{,_ns}
STATX_INO Want/got stx_ino
STATX_SIZE Want/got stx_size
STATX_BLOCKS Want/got stx_blocks
STATX_BASIC_STATS [The stuff in the normal stat struct]
STATX_BTIME Want/got stx_btime{,_ns}
STATX_ALL [All currently available stuff]

stx_btime is the file creation time, stx_mask is a bitmask indicating the
data provided and __spares*[] are where as-yet undefined fields can be
placed.

Time fields are structures with separate seconds and nanoseconds fields
plus a reserved field in case we want to add even finer resolution. Note
that times will be negative if before 1970; in such a case, the nanosecond
fields will also be negative if not zero.

The bits defined in the stx_attributes field convey information about a
file, how it is accessed, where it is and what it does. The following
attributes map to FS_*_FL flags and are the same numerical value:

STATX_ATTR_COMPRESSED File is compressed by the fs
STATX_ATTR_IMMUTABLE File is marked immutable
STATX_ATTR_APPEND File is append-only
STATX_ATTR_NODUMP File is not to be dumped
STATX_ATTR_ENCRYPTED File requires key to decrypt in fs

Within the kernel, the supported flags are listed by:

KSTAT_ATTR_FS_IOC_FLAGS

[Are any other IOC flags of sufficient general interest to be exposed
through this interface?]

New flags include:

STATX_ATTR_AUTOMOUNT Object is an automount trigger

These are for the use of GUI tools that might want to mark files specially,
depending on what they are.

Fields in struct statx come in a number of classes:

(0) stx_dev_*, stx_blksize.

These are local system information and are always available.

(1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino,
stx_size, stx_blocks.

These will be returned whether the caller asks for them or not. The
corresponding bits in stx_mask will be set to indicate whether they
actually have valid values.

If the caller didn't ask for them, then they may be approximated. For
example, NFS won't waste any time updating them from the server,
unless as a byproduct of updating something requested.

If the values don't actually exist for the underlying object (such as
UID or GID on a DOS file), then the bit won't be set in the stx_mask,
even if the caller asked for the value. In such a case, the returned
value will be a fabrication.

Note that there are instances where the type might not be valid, for
instance Windows reparse points.

(2) stx_rdev_*.

This will be set only if stx_mode indicates we're looking at a
blockdev or a chardev, otherwise will be 0.

(3) stx_btime.

Similar to (1), except this will be set to 0 if it doesn't exist.

=======
TESTING
=======

The following test program can be used to test the statx system call:

samples/statx/test-statx.c

Just compile and run, passing it paths to the files you want to examine.
The file is built automatically if CONFIG_SAMPLES is enabled.

Here's some example output. Firstly, an NFS directory that crosses to
another FSID. Note that the AUTOMOUNT attribute is set because transiting
this directory will cause d_automount to be invoked by the VFS.

[root@andromeda ~]# /tmp/test-statx -A /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:26 Inode: 1703937 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000
Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------)

Secondly, the result of automounting on that directory.

[root@andromeda ~]# /tmp/test-statx /warthog/data
statx(/warthog/data) = 0
results=7ff
Size: 4096 Blocks: 8 IO Block: 1048576 directory
Device: 00:27 Inode: 2 Links: 125
Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041
Access: 2016-11-24 09:02:12.219699527+0000
Modify: 2016-11-17 10:44:36.225653653+0000
Change: 2016-11-17 10:44:36.225653653+0000

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull vfs pile two from Al Viro:

- orangefs fix

- series of fs/namei.c cleanups from me

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull vfs pile two from Al Viro:

- orangefs fix

- series of fs/namei.c cleanups from me

- VFS stuff coming from overlayfs tree

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
orangefs: Use RCU for destroy_inode
vfs: use helper for calling f_op->fsync()
mm: use helper for calling f_op->mmap()
vfs: use helpers for calling f_op->{read,write}_iter()
vfs: pass type instead of fn to do_{loop,iter}_readv_writev()
vfs: extract common parts of {compat_,}do_readv_writev()
vfs: wrap write f_ops with file_{start,end}_write()
vfs: deny copy_file_range() for non regular files
vfs: deny fallocate() on directory
vfs: create vfs helper vfs_tmpfile()
namei.c: split unlazy_walk()
namei.c: fold the check for DCACHE_OP_REVALIDATE into d_revalidate()
lookup_fast(): clean up the logics around the fallback to non-rcu mode
namei: fold unlazy_link() into its sole caller

show more ...

loop: fix LO_FLAGS_PARTSCAN hang

loop_reread_partitions() needs to do I/O, but we just froze the queue,
so we end up waiting forever. This can easily be reproduced with losetup
-P. F

loop: fix LO_FLAGS_PARTSCAN hang

loop_reread_partitions() needs to do I/O, but we just froze the queue,
so we end up waiting forever. This can easily be reproduced with losetup
-P. Fix it by moving the reread to after we unfreeze the queue.

Fixes: ecdd09597a57 ("block/loop: fix race between I/O and set_status")
Reported-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

show more ...

Merge remote-tracking branch 'ovl/for-viro' into for-linus

Overlayfs-related series from Miklos and Amir

scripts/spelling.txt: add "algined" pattern and fix typo instances

Fix typos and add the following to the scripts/spelling.txt:

algined||aligned

While we are here, fix th

scripts/spelling.txt: add "algined" pattern and fix typo instances

Fix typos and add the following to the scripts/spelling.txt:

algined||aligned

While we are here, fix the "appplication" in the touched line in
drivers/block/loop.c. Also, fix the "may not naturally ..." to
"may not be naturally ..." in the touched line in mm/page_alloc.

Link: http://lkml.kernel.org/r/1481573103-11329-9-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

vfs: use helpers for calling f_op->{read,write}_iter()

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

block/loop: fix race between I/O and set_status

Inside set_status, transfer need to setup again, so
we have to drain IO before the transition, otherwise
oops may be triggered like th

block/loop: fix race between I/O and set_status

Inside set_status, transfer need to setup again, so
we have to drain IO before the transition, otherwise
oops may be triggered like the following:

divide error: 0000 [#1] SMP KASAN
CPU: 0 PID: 2935 Comm: loop7 Not tainted 4.10.0-rc7+ #213
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs
01/01/2011
task: ffff88006ba1e840 task.stack: ffff880067338000
RIP: 0010:transfer_xor+0x1d1/0x440 drivers/block/loop.c:110
RSP: 0018:ffff88006733f108 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8800688d7000 RCX: 0000000000000059
RDX: 0000000000000000 RSI: 1ffff1000d743f43 RDI: ffff880068891c08
RBP: ffff88006733f160 R08: ffff8800688d7001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800688d7000
R13: ffff880067b7d000 R14: dffffc0000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88006d000000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000006c17e0 CR3: 0000000066e3b000 CR4: 00000000001406f0
Call Trace:
lo_do_transfer drivers/block/loop.c:251 [inline]
lo_read_transfer drivers/block/loop.c:392 [inline]
do_req_filebacked drivers/block/loop.c:541 [inline]
loop_handle_cmd drivers/block/loop.c:1677 [inline]
loop_queue_work+0xda0/0x49b0 drivers/block/loop.c:1689
kthread_worker_fn+0x4c3/0xa30 kernel/kthread.c:630
kthread+0x326/0x3f0 kernel/kthread.c:227
ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430
Code: 03 83 e2 07 41 29 df 42 0f b6 04 30 4d 8d 44 24 01 38 d0 7f 08
84 c0 0f 85 62 02 00 00 44 89 f8 41 0f b6 48 ff 25 ff 01 00 00 99 <f7>
7d c8 48 63 d2 48 03 55 d0 48 89 d0 48 89 d7 48 c1 e8 03 83
RIP: transfer_xor+0x1d1/0x440 drivers/block/loop.c:110 RSP:
ffff88006733f108
---[ end trace 0166f7bd3b0c0933 ]---

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

show more ...

Replace <asm/uaccess.h> with <linux/uaccess.h> globally

This was entirely automated, using the script by Al:

PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'

Replace <asm/uaccess.h> with <linux/uaccess.h> globally

This was entirely automated, using the script by Al:

PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

loop: return proper error from loop_queue_rq()

->queue_rq() should return one of the BLK_MQ_RQ_QUEUE_* constants, not
an errno.

f4aa4c7bbac6 ("block: loop: convert to per-device

loop: return proper error from loop_queue_rq()

->queue_rq() should return one of the BLK_MQ_RQ_QUEUE_* constants, not
an errno.

f4aa4c7bbac6 ("block: loop: convert to per-device workqueue")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>

show more ...

kthread: kthread worker API cleanup

A good practice is to prefix the names of functions by the name
of the subsystem.

The kthread worker API is a mix of classic kthreads and wor

kthread: kthread worker API cleanup

A good practice is to prefix the names of functions by the name
of the subsystem.

The kthread worker API is a mix of classic kthreads and workqueues. Each
worker has a dedicated kthread. It runs a generic function that process
queued works. It is implemented as part of the kthread subsystem.

This patch renames the existing kthread worker API to use
the corresponding name from the workqueues API prefixed by
kthread_:

__init_kthread_worker() -> __kthread_init_worker()
init_kthread_worker() -> kthread_init_worker()
init_kthread_work() -> kthread_init_work()
insert_kthread_work() -> kthread_insert_work()
queue_kthread_work() -> kthread_queue_work()
flush_kthread_work() -> kthread_flush_work()
flush_kthread_worker() -> kthread_flush_worker()

Note that the names of DEFINE_KTHREAD_WORK*() macros stay
as they are. It is common that the "DEFINE_" prefix has
precedence over the subsystem names.

Note that INIT() macros and init() functions use different
naming scheme. There is no good solution. There are several
reasons for this solution:

+ "init" in the function names stands for the verb "initialize"
aka "initialize worker". While "INIT" in the macro names
stands for the noun "INITIALIZER" aka "worker initializer".

+ INIT() macros are used only in DEFINE() macros

+ init() functions are used close to the other kthread()
functions. It looks much better if all the functions
use the same scheme.

+ There will be also kthread_destroy_worker() that will
be used close to kthread_cancel_work(). It is related
to the init() function. Again it looks better if all
functions use the same naming scheme.

+ there are several precedents for such init() function
names, e.g. amd_iommu_init_device(), free_area_init_node(),
jump_label_init_type(), regmap_init_mmio_clk(),

+ It is not an argument but it was inconsistent even before.

[arnd@arndb.de: fix linux-next merge conflict]
Link: http://lkml.kernel.org/r/20160908135724.1311726-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/1470754545-17632-3-git-send-email-pmladek@suse.com
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Borislav Petkov <bp@suse.de>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

blk-mq: remove ->map_queue

All drivers use the default, so provide an inline version of it. If we
ever need other queue mapping we can add an optional method back,
although supporti

blk-mq: remove ->map_queue

All drivers use the default, so provide an inline version of it. If we
ever need other queue mapping we can add an optional method back,
although supporting will also require major changes to the queue setup
code.

This provides better code generation, and better debugability as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

show more ...

loop: make do_req_filebacked more robust

Use a switch statement to iterate over the possible operations and
error out if it's an incorrect one.

Signed-off-by: Jens Axboe <axboe@

loop: make do_req_filebacked more robust

Use a switch statement to iterate over the possible operations and
error out if it's an incorrect one.

Signed-off-by: Jens Axboe <axboe@fb.com>

show more ...

loop: don't try to use AIO for discards

Fix a fat-fingered conversion to the req_op accessors, and also
use a switch statement to make it more obvious what is being checked.

Sig

loop: don't try to use AIO for discards

Fix a fat-fingered conversion to the req_op accessors, and also
use a switch statement to make it more obvious what is being checked.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Dave Chinner <david@fromorbit.com>
Fixes: c2df40 ("drivers: use req op accessor");
Reviewed-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

show more ...

loop: Make user notify for adding loop device failed

There is no error number returned if loop driver fails in function
alloc_disk to add new loop device. Add a correct error number to m

loop: Make user notify for adding loop device failed

There is no error number returned if loop driver fails in function
alloc_disk to add new loop device. Add a correct error number to make
user notify in this case.

Signed-off-by: Minfei Huang <mnghuan@gmail.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

show more ...