xref: /openbmc/linux/drivers/media/i2c/ov6650.c (revision e15a5365)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * V4L2 subdevice driver for OmniVision OV6650 Camera Sensor
4  *
5  * Copyright (C) 2010 Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
6  *
7  * Based on OmniVision OV96xx Camera Driver
8  * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
9  *
10  * Based on ov772x camera driver:
11  * Copyright (C) 2008 Renesas Solutions Corp.
12  * Kuninori Morimoto <morimoto.kuninori@renesas.com>
13  *
14  * Based on ov7670 and soc_camera_platform driver,
15  * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net>
16  * Copyright (C) 2008 Magnus Damm
17  * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
18  *
19  * Hardware specific bits initially based on former work by Matt Callow
20  * drivers/media/video/omap/sensor_ov6650.c
21  * Copyright (C) 2006 Matt Callow
22  */
23 
24 #include <linux/bitops.h>
25 #include <linux/delay.h>
26 #include <linux/i2c.h>
27 #include <linux/slab.h>
28 #include <linux/v4l2-mediabus.h>
29 #include <linux/module.h>
30 
31 #include <media/v4l2-clk.h>
32 #include <media/v4l2-ctrls.h>
33 #include <media/v4l2-device.h>
34 
35 /* Register definitions */
36 #define REG_GAIN		0x00	/* range 00 - 3F */
37 #define REG_BLUE		0x01
38 #define REG_RED			0x02
39 #define REG_SAT			0x03	/* [7:4] saturation [0:3] reserved */
40 #define REG_HUE			0x04	/* [7:6] rsrvd [5] hue en [4:0] hue */
41 
42 #define REG_BRT			0x06
43 
44 #define REG_PIDH		0x0a
45 #define REG_PIDL		0x0b
46 
47 #define REG_AECH		0x10
48 #define REG_CLKRC		0x11	/* Data Format and Internal Clock */
49 					/* [7:6] Input system clock (MHz)*/
50 					/*   00=8, 01=12, 10=16, 11=24 */
51 					/* [5:0]: Internal Clock Pre-Scaler */
52 #define REG_COMA		0x12	/* [7] Reset */
53 #define REG_COMB		0x13
54 #define REG_COMC		0x14
55 #define REG_COMD		0x15
56 #define REG_COML		0x16
57 #define REG_HSTRT		0x17
58 #define REG_HSTOP		0x18
59 #define REG_VSTRT		0x19
60 #define REG_VSTOP		0x1a
61 #define REG_PSHFT		0x1b
62 #define REG_MIDH		0x1c
63 #define REG_MIDL		0x1d
64 #define REG_HSYNS		0x1e
65 #define REG_HSYNE		0x1f
66 #define REG_COME		0x20
67 #define REG_YOFF		0x21
68 #define REG_UOFF		0x22
69 #define REG_VOFF		0x23
70 #define REG_AEW			0x24
71 #define REG_AEB			0x25
72 #define REG_COMF		0x26
73 #define REG_COMG		0x27
74 #define REG_COMH		0x28
75 #define REG_COMI		0x29
76 
77 #define REG_FRARL		0x2b
78 #define REG_COMJ		0x2c
79 #define REG_COMK		0x2d
80 #define REG_AVGY		0x2e
81 #define REG_REF0		0x2f
82 #define REG_REF1		0x30
83 #define REG_REF2		0x31
84 #define REG_FRAJH		0x32
85 #define REG_FRAJL		0x33
86 #define REG_FACT		0x34
87 #define REG_L1AEC		0x35
88 #define REG_AVGU		0x36
89 #define REG_AVGV		0x37
90 
91 #define REG_SPCB		0x60
92 #define REG_SPCC		0x61
93 #define REG_GAM1		0x62
94 #define REG_GAM2		0x63
95 #define REG_GAM3		0x64
96 #define REG_SPCD		0x65
97 
98 #define REG_SPCE		0x68
99 #define REG_ADCL		0x69
100 
101 #define REG_RMCO		0x6c
102 #define REG_GMCO		0x6d
103 #define REG_BMCO		0x6e
104 
105 
106 /* Register bits, values, etc. */
107 #define OV6650_PIDH		0x66	/* high byte of product ID number */
108 #define OV6650_PIDL		0x50	/* low byte of product ID number */
109 #define OV6650_MIDH		0x7F	/* high byte of mfg ID */
110 #define OV6650_MIDL		0xA2	/* low byte of mfg ID */
111 
112 #define DEF_GAIN		0x00
113 #define DEF_BLUE		0x80
114 #define DEF_RED			0x80
115 
116 #define SAT_SHIFT		4
117 #define SAT_MASK		(0xf << SAT_SHIFT)
118 #define SET_SAT(x)		(((x) << SAT_SHIFT) & SAT_MASK)
119 
120 #define HUE_EN			BIT(5)
121 #define HUE_MASK		0x1f
122 #define DEF_HUE			0x10
123 #define SET_HUE(x)		(HUE_EN | ((x) & HUE_MASK))
124 
125 #define DEF_AECH		0x4D
126 
127 #define CLKRC_8MHz		0x00
128 #define CLKRC_12MHz		0x40
129 #define CLKRC_16MHz		0x80
130 #define CLKRC_24MHz		0xc0
131 #define CLKRC_DIV_MASK		0x3f
132 #define GET_CLKRC_DIV(x)	(((x) & CLKRC_DIV_MASK) + 1)
133 #define DEF_CLKRC		0x00
134 
135 #define COMA_RESET		BIT(7)
136 #define COMA_QCIF		BIT(5)
137 #define COMA_RAW_RGB		BIT(4)
138 #define COMA_RGB		BIT(3)
139 #define COMA_BW			BIT(2)
140 #define COMA_WORD_SWAP		BIT(1)
141 #define COMA_BYTE_SWAP		BIT(0)
142 #define DEF_COMA		0x00
143 
144 #define COMB_FLIP_V		BIT(7)
145 #define COMB_FLIP_H		BIT(5)
146 #define COMB_BAND_FILTER	BIT(4)
147 #define COMB_AWB		BIT(2)
148 #define COMB_AGC		BIT(1)
149 #define COMB_AEC		BIT(0)
150 #define DEF_COMB		0x5f
151 
152 #define COML_ONE_CHANNEL	BIT(7)
153 
154 #define DEF_HSTRT		0x24
155 #define DEF_HSTOP		0xd4
156 #define DEF_VSTRT		0x04
157 #define DEF_VSTOP		0x94
158 
159 #define COMF_HREF_LOW		BIT(4)
160 
161 #define COMJ_PCLK_RISING	BIT(4)
162 #define COMJ_VSYNC_HIGH		BIT(0)
163 
164 /* supported resolutions */
165 #define W_QCIF			(DEF_HSTOP - DEF_HSTRT)
166 #define W_CIF			(W_QCIF << 1)
167 #define H_QCIF			(DEF_VSTOP - DEF_VSTRT)
168 #define H_CIF			(H_QCIF << 1)
169 
170 #define FRAME_RATE_MAX		30
171 
172 
173 struct ov6650_reg {
174 	u8	reg;
175 	u8	val;
176 };
177 
178 struct ov6650 {
179 	struct v4l2_subdev	subdev;
180 	struct v4l2_ctrl_handler hdl;
181 	struct {
182 		/* exposure/autoexposure cluster */
183 		struct v4l2_ctrl *autoexposure;
184 		struct v4l2_ctrl *exposure;
185 	};
186 	struct {
187 		/* gain/autogain cluster */
188 		struct v4l2_ctrl *autogain;
189 		struct v4l2_ctrl *gain;
190 	};
191 	struct {
192 		/* blue/red/autowhitebalance cluster */
193 		struct v4l2_ctrl *autowb;
194 		struct v4l2_ctrl *blue;
195 		struct v4l2_ctrl *red;
196 	};
197 	struct v4l2_clk		*clk;
198 	bool			half_scale;	/* scale down output by 2 */
199 	struct v4l2_rect	rect;		/* sensor cropping window */
200 	struct v4l2_fract	tpf;		/* as requested with s_frame_interval */
201 	u32 code;
202 };
203 
204 struct ov6650_xclk {
205 	unsigned long	rate;
206 	u8		clkrc;
207 };
208 
209 static const struct ov6650_xclk ov6650_xclk[] = {
210 {
211 	.rate	= 8000000,
212 	.clkrc	= CLKRC_8MHz,
213 },
214 {
215 	.rate	= 12000000,
216 	.clkrc	= CLKRC_12MHz,
217 },
218 {
219 	.rate	= 16000000,
220 	.clkrc	= CLKRC_16MHz,
221 },
222 {
223 	.rate	= 24000000,
224 	.clkrc	= CLKRC_24MHz,
225 },
226 };
227 
228 static u32 ov6650_codes[] = {
229 	MEDIA_BUS_FMT_YUYV8_2X8,
230 	MEDIA_BUS_FMT_UYVY8_2X8,
231 	MEDIA_BUS_FMT_YVYU8_2X8,
232 	MEDIA_BUS_FMT_VYUY8_2X8,
233 	MEDIA_BUS_FMT_SBGGR8_1X8,
234 	MEDIA_BUS_FMT_Y8_1X8,
235 };
236 
237 static const struct v4l2_mbus_framefmt ov6650_def_fmt = {
238 	.width		= W_CIF,
239 	.height		= H_CIF,
240 	.code		= MEDIA_BUS_FMT_SBGGR8_1X8,
241 	.colorspace	= V4L2_COLORSPACE_SRGB,
242 	.field		= V4L2_FIELD_NONE,
243 	.ycbcr_enc	= V4L2_YCBCR_ENC_DEFAULT,
244 	.quantization	= V4L2_QUANTIZATION_DEFAULT,
245 	.xfer_func	= V4L2_XFER_FUNC_DEFAULT,
246 };
247 
248 /* read a register */
249 static int ov6650_reg_read(struct i2c_client *client, u8 reg, u8 *val)
250 {
251 	int ret;
252 	u8 data = reg;
253 	struct i2c_msg msg = {
254 		.addr	= client->addr,
255 		.flags	= 0,
256 		.len	= 1,
257 		.buf	= &data,
258 	};
259 
260 	ret = i2c_transfer(client->adapter, &msg, 1);
261 	if (ret < 0)
262 		goto err;
263 
264 	msg.flags = I2C_M_RD;
265 	ret = i2c_transfer(client->adapter, &msg, 1);
266 	if (ret < 0)
267 		goto err;
268 
269 	*val = data;
270 	return 0;
271 
272 err:
273 	dev_err(&client->dev, "Failed reading register 0x%02x!\n", reg);
274 	return ret;
275 }
276 
277 /* write a register */
278 static int ov6650_reg_write(struct i2c_client *client, u8 reg, u8 val)
279 {
280 	int ret;
281 	unsigned char data[2] = { reg, val };
282 	struct i2c_msg msg = {
283 		.addr	= client->addr,
284 		.flags	= 0,
285 		.len	= 2,
286 		.buf	= data,
287 	};
288 
289 	ret = i2c_transfer(client->adapter, &msg, 1);
290 	udelay(100);
291 
292 	if (ret < 0) {
293 		dev_err(&client->dev, "Failed writing register 0x%02x!\n", reg);
294 		return ret;
295 	}
296 	return 0;
297 }
298 
299 
300 /* Read a register, alter its bits, write it back */
301 static int ov6650_reg_rmw(struct i2c_client *client, u8 reg, u8 set, u8 mask)
302 {
303 	u8 val;
304 	int ret;
305 
306 	ret = ov6650_reg_read(client, reg, &val);
307 	if (ret) {
308 		dev_err(&client->dev,
309 			"[Read]-Modify-Write of register 0x%02x failed!\n",
310 			reg);
311 		return ret;
312 	}
313 
314 	val &= ~mask;
315 	val |= set;
316 
317 	ret = ov6650_reg_write(client, reg, val);
318 	if (ret)
319 		dev_err(&client->dev,
320 			"Read-Modify-[Write] of register 0x%02x failed!\n",
321 			reg);
322 
323 	return ret;
324 }
325 
326 static struct ov6650 *to_ov6650(const struct i2c_client *client)
327 {
328 	return container_of(i2c_get_clientdata(client), struct ov6650, subdev);
329 }
330 
331 /* Start/Stop streaming from the device */
332 static int ov6650_s_stream(struct v4l2_subdev *sd, int enable)
333 {
334 	return 0;
335 }
336 
337 /* Get status of additional camera capabilities */
338 static int ov6550_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
339 {
340 	struct ov6650 *priv = container_of(ctrl->handler, struct ov6650, hdl);
341 	struct v4l2_subdev *sd = &priv->subdev;
342 	struct i2c_client *client = v4l2_get_subdevdata(sd);
343 	uint8_t reg, reg2;
344 	int ret;
345 
346 	switch (ctrl->id) {
347 	case V4L2_CID_AUTOGAIN:
348 		ret = ov6650_reg_read(client, REG_GAIN, &reg);
349 		if (!ret)
350 			priv->gain->val = reg;
351 		return ret;
352 	case V4L2_CID_AUTO_WHITE_BALANCE:
353 		ret = ov6650_reg_read(client, REG_BLUE, &reg);
354 		if (!ret)
355 			ret = ov6650_reg_read(client, REG_RED, &reg2);
356 		if (!ret) {
357 			priv->blue->val = reg;
358 			priv->red->val = reg2;
359 		}
360 		return ret;
361 	case V4L2_CID_EXPOSURE_AUTO:
362 		ret = ov6650_reg_read(client, REG_AECH, &reg);
363 		if (!ret)
364 			priv->exposure->val = reg;
365 		return ret;
366 	}
367 	return -EINVAL;
368 }
369 
370 /* Set status of additional camera capabilities */
371 static int ov6550_s_ctrl(struct v4l2_ctrl *ctrl)
372 {
373 	struct ov6650 *priv = container_of(ctrl->handler, struct ov6650, hdl);
374 	struct v4l2_subdev *sd = &priv->subdev;
375 	struct i2c_client *client = v4l2_get_subdevdata(sd);
376 	int ret;
377 
378 	switch (ctrl->id) {
379 	case V4L2_CID_AUTOGAIN:
380 		ret = ov6650_reg_rmw(client, REG_COMB,
381 				ctrl->val ? COMB_AGC : 0, COMB_AGC);
382 		if (!ret && !ctrl->val)
383 			ret = ov6650_reg_write(client, REG_GAIN, priv->gain->val);
384 		return ret;
385 	case V4L2_CID_AUTO_WHITE_BALANCE:
386 		ret = ov6650_reg_rmw(client, REG_COMB,
387 				ctrl->val ? COMB_AWB : 0, COMB_AWB);
388 		if (!ret && !ctrl->val) {
389 			ret = ov6650_reg_write(client, REG_BLUE, priv->blue->val);
390 			if (!ret)
391 				ret = ov6650_reg_write(client, REG_RED,
392 							priv->red->val);
393 		}
394 		return ret;
395 	case V4L2_CID_SATURATION:
396 		return ov6650_reg_rmw(client, REG_SAT, SET_SAT(ctrl->val),
397 				SAT_MASK);
398 	case V4L2_CID_HUE:
399 		return ov6650_reg_rmw(client, REG_HUE, SET_HUE(ctrl->val),
400 				HUE_MASK);
401 	case V4L2_CID_BRIGHTNESS:
402 		return ov6650_reg_write(client, REG_BRT, ctrl->val);
403 	case V4L2_CID_EXPOSURE_AUTO:
404 		ret = ov6650_reg_rmw(client, REG_COMB, ctrl->val ==
405 				V4L2_EXPOSURE_AUTO ? COMB_AEC : 0, COMB_AEC);
406 		if (!ret && ctrl->val == V4L2_EXPOSURE_MANUAL)
407 			ret = ov6650_reg_write(client, REG_AECH,
408 						priv->exposure->val);
409 		return ret;
410 	case V4L2_CID_GAMMA:
411 		return ov6650_reg_write(client, REG_GAM1, ctrl->val);
412 	case V4L2_CID_VFLIP:
413 		return ov6650_reg_rmw(client, REG_COMB,
414 				ctrl->val ? COMB_FLIP_V : 0, COMB_FLIP_V);
415 	case V4L2_CID_HFLIP:
416 		return ov6650_reg_rmw(client, REG_COMB,
417 				ctrl->val ? COMB_FLIP_H : 0, COMB_FLIP_H);
418 	}
419 
420 	return -EINVAL;
421 }
422 
423 #ifdef CONFIG_VIDEO_ADV_DEBUG
424 static int ov6650_get_register(struct v4l2_subdev *sd,
425 				struct v4l2_dbg_register *reg)
426 {
427 	struct i2c_client *client = v4l2_get_subdevdata(sd);
428 	int ret;
429 	u8 val;
430 
431 	if (reg->reg & ~0xff)
432 		return -EINVAL;
433 
434 	reg->size = 1;
435 
436 	ret = ov6650_reg_read(client, reg->reg, &val);
437 	if (!ret)
438 		reg->val = (__u64)val;
439 
440 	return ret;
441 }
442 
443 static int ov6650_set_register(struct v4l2_subdev *sd,
444 				const struct v4l2_dbg_register *reg)
445 {
446 	struct i2c_client *client = v4l2_get_subdevdata(sd);
447 
448 	if (reg->reg & ~0xff || reg->val & ~0xff)
449 		return -EINVAL;
450 
451 	return ov6650_reg_write(client, reg->reg, reg->val);
452 }
453 #endif
454 
455 static int ov6650_s_power(struct v4l2_subdev *sd, int on)
456 {
457 	struct i2c_client *client = v4l2_get_subdevdata(sd);
458 	struct ov6650 *priv = to_ov6650(client);
459 	int ret = 0;
460 
461 	if (on)
462 		ret = v4l2_clk_enable(priv->clk);
463 	else
464 		v4l2_clk_disable(priv->clk);
465 
466 	return ret;
467 }
468 
469 static int ov6650_get_selection(struct v4l2_subdev *sd,
470 		struct v4l2_subdev_pad_config *cfg,
471 		struct v4l2_subdev_selection *sel)
472 {
473 	struct i2c_client *client = v4l2_get_subdevdata(sd);
474 	struct ov6650 *priv = to_ov6650(client);
475 
476 	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
477 		return -EINVAL;
478 
479 	switch (sel->target) {
480 	case V4L2_SEL_TGT_CROP_BOUNDS:
481 		sel->r.left = DEF_HSTRT << 1;
482 		sel->r.top = DEF_VSTRT << 1;
483 		sel->r.width = W_CIF;
484 		sel->r.height = H_CIF;
485 		return 0;
486 	case V4L2_SEL_TGT_CROP:
487 		sel->r = priv->rect;
488 		return 0;
489 	default:
490 		return -EINVAL;
491 	}
492 }
493 
494 static int ov6650_set_selection(struct v4l2_subdev *sd,
495 		struct v4l2_subdev_pad_config *cfg,
496 		struct v4l2_subdev_selection *sel)
497 {
498 	struct i2c_client *client = v4l2_get_subdevdata(sd);
499 	struct ov6650 *priv = to_ov6650(client);
500 	int ret;
501 
502 	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
503 	    sel->target != V4L2_SEL_TGT_CROP)
504 		return -EINVAL;
505 
506 	v4l_bound_align_image(&sel->r.width, 2, W_CIF, 1,
507 			      &sel->r.height, 2, H_CIF, 1, 0);
508 	v4l_bound_align_image(&sel->r.left, DEF_HSTRT << 1,
509 			      (DEF_HSTRT << 1) + W_CIF - (__s32)sel->r.width, 1,
510 			      &sel->r.top, DEF_VSTRT << 1,
511 			      (DEF_VSTRT << 1) + H_CIF - (__s32)sel->r.height,
512 			      1, 0);
513 
514 	ret = ov6650_reg_write(client, REG_HSTRT, sel->r.left >> 1);
515 	if (!ret) {
516 		priv->rect.width += priv->rect.left - sel->r.left;
517 		priv->rect.left = sel->r.left;
518 		ret = ov6650_reg_write(client, REG_HSTOP,
519 				       (sel->r.left + sel->r.width) >> 1);
520 	}
521 	if (!ret) {
522 		priv->rect.width = sel->r.width;
523 		ret = ov6650_reg_write(client, REG_VSTRT, sel->r.top >> 1);
524 	}
525 	if (!ret) {
526 		priv->rect.height += priv->rect.top - sel->r.top;
527 		priv->rect.top = sel->r.top;
528 		ret = ov6650_reg_write(client, REG_VSTOP,
529 				       (sel->r.top + sel->r.height) >> 1);
530 	}
531 	if (!ret)
532 		priv->rect.height = sel->r.height;
533 
534 	return ret;
535 }
536 
537 static int ov6650_get_fmt(struct v4l2_subdev *sd,
538 		struct v4l2_subdev_pad_config *cfg,
539 		struct v4l2_subdev_format *format)
540 {
541 	struct v4l2_mbus_framefmt *mf = &format->format;
542 	struct i2c_client *client = v4l2_get_subdevdata(sd);
543 	struct ov6650 *priv = to_ov6650(client);
544 
545 	if (format->pad)
546 		return -EINVAL;
547 
548 	/* initialize response with default media bus frame format */
549 	*mf = ov6650_def_fmt;
550 
551 	/* update media bus format code and frame size */
552 	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
553 		mf->width = cfg->try_fmt.width;
554 		mf->height = cfg->try_fmt.height;
555 		mf->code = cfg->try_fmt.code;
556 
557 	} else {
558 		mf->width = priv->rect.width >> priv->half_scale;
559 		mf->height = priv->rect.height >> priv->half_scale;
560 		mf->code = priv->code;
561 	}
562 	return 0;
563 }
564 
565 static bool is_unscaled_ok(int width, int height, struct v4l2_rect *rect)
566 {
567 	return width > rect->width >> 1 || height > rect->height >> 1;
568 }
569 
570 #define to_clkrc(div)	((div) - 1)
571 
572 /* set the format we will capture in */
573 static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf)
574 {
575 	struct i2c_client *client = v4l2_get_subdevdata(sd);
576 	struct ov6650 *priv = to_ov6650(client);
577 	bool half_scale = !is_unscaled_ok(mf->width, mf->height, &priv->rect);
578 	struct v4l2_subdev_selection sel = {
579 		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
580 		.target = V4L2_SEL_TGT_CROP,
581 		.r.left = priv->rect.left + (priv->rect.width >> 1) -
582 			(mf->width >> (1 - half_scale)),
583 		.r.top = priv->rect.top + (priv->rect.height >> 1) -
584 			(mf->height >> (1 - half_scale)),
585 		.r.width = mf->width << half_scale,
586 		.r.height = mf->height << half_scale,
587 	};
588 	u32 code = mf->code;
589 	u8 coma_set = 0, coma_mask = 0, coml_set, coml_mask;
590 	int ret;
591 
592 	/* select color matrix configuration for given color encoding */
593 	switch (code) {
594 	case MEDIA_BUS_FMT_Y8_1X8:
595 		dev_dbg(&client->dev, "pixel format GREY8_1X8\n");
596 		coma_mask |= COMA_RGB | COMA_WORD_SWAP | COMA_BYTE_SWAP;
597 		coma_set |= COMA_BW;
598 		break;
599 	case MEDIA_BUS_FMT_YUYV8_2X8:
600 		dev_dbg(&client->dev, "pixel format YUYV8_2X8_LE\n");
601 		coma_mask |= COMA_RGB | COMA_BW | COMA_BYTE_SWAP;
602 		coma_set |= COMA_WORD_SWAP;
603 		break;
604 	case MEDIA_BUS_FMT_YVYU8_2X8:
605 		dev_dbg(&client->dev, "pixel format YVYU8_2X8_LE (untested)\n");
606 		coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP |
607 				COMA_BYTE_SWAP;
608 		break;
609 	case MEDIA_BUS_FMT_UYVY8_2X8:
610 		dev_dbg(&client->dev, "pixel format YUYV8_2X8_BE\n");
611 		if (half_scale) {
612 			coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP;
613 			coma_set |= COMA_BYTE_SWAP;
614 		} else {
615 			coma_mask |= COMA_RGB | COMA_BW;
616 			coma_set |= COMA_BYTE_SWAP | COMA_WORD_SWAP;
617 		}
618 		break;
619 	case MEDIA_BUS_FMT_VYUY8_2X8:
620 		dev_dbg(&client->dev, "pixel format YVYU8_2X8_BE (untested)\n");
621 		if (half_scale) {
622 			coma_mask |= COMA_RGB | COMA_BW;
623 			coma_set |= COMA_BYTE_SWAP | COMA_WORD_SWAP;
624 		} else {
625 			coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP;
626 			coma_set |= COMA_BYTE_SWAP;
627 		}
628 		break;
629 	case MEDIA_BUS_FMT_SBGGR8_1X8:
630 		dev_dbg(&client->dev, "pixel format SBGGR8_1X8 (untested)\n");
631 		coma_mask |= COMA_BW | COMA_BYTE_SWAP | COMA_WORD_SWAP;
632 		coma_set |= COMA_RAW_RGB | COMA_RGB;
633 		break;
634 	default:
635 		dev_err(&client->dev, "Pixel format not handled: 0x%x\n", code);
636 		return -EINVAL;
637 	}
638 
639 	if (code == MEDIA_BUS_FMT_Y8_1X8 ||
640 			code == MEDIA_BUS_FMT_SBGGR8_1X8) {
641 		coml_mask = COML_ONE_CHANNEL;
642 		coml_set = 0;
643 	} else {
644 		coml_mask = 0;
645 		coml_set = COML_ONE_CHANNEL;
646 	}
647 
648 	if (half_scale) {
649 		dev_dbg(&client->dev, "max resolution: QCIF\n");
650 		coma_set |= COMA_QCIF;
651 	} else {
652 		dev_dbg(&client->dev, "max resolution: CIF\n");
653 		coma_mask |= COMA_QCIF;
654 	}
655 
656 	ret = ov6650_set_selection(sd, NULL, &sel);
657 	if (!ret)
658 		ret = ov6650_reg_rmw(client, REG_COMA, coma_set, coma_mask);
659 	if (!ret) {
660 		priv->half_scale = half_scale;
661 
662 		ret = ov6650_reg_rmw(client, REG_COML, coml_set, coml_mask);
663 	}
664 	if (!ret)
665 		priv->code = code;
666 
667 	return ret;
668 }
669 
670 static int ov6650_set_fmt(struct v4l2_subdev *sd,
671 		struct v4l2_subdev_pad_config *cfg,
672 		struct v4l2_subdev_format *format)
673 {
674 	struct v4l2_mbus_framefmt *mf = &format->format;
675 	struct i2c_client *client = v4l2_get_subdevdata(sd);
676 	struct ov6650 *priv = to_ov6650(client);
677 
678 	if (format->pad)
679 		return -EINVAL;
680 
681 	if (is_unscaled_ok(mf->width, mf->height, &priv->rect))
682 		v4l_bound_align_image(&mf->width, 2, W_CIF, 1,
683 				&mf->height, 2, H_CIF, 1, 0);
684 
685 	switch (mf->code) {
686 	case MEDIA_BUS_FMT_Y10_1X10:
687 		mf->code = MEDIA_BUS_FMT_Y8_1X8;
688 		fallthrough;
689 	case MEDIA_BUS_FMT_Y8_1X8:
690 	case MEDIA_BUS_FMT_YVYU8_2X8:
691 	case MEDIA_BUS_FMT_YUYV8_2X8:
692 	case MEDIA_BUS_FMT_VYUY8_2X8:
693 	case MEDIA_BUS_FMT_UYVY8_2X8:
694 		break;
695 	default:
696 		mf->code = MEDIA_BUS_FMT_SBGGR8_1X8;
697 		fallthrough;
698 	case MEDIA_BUS_FMT_SBGGR8_1X8:
699 		break;
700 	}
701 
702 	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
703 		/* store media bus format code and frame size in pad config */
704 		cfg->try_fmt.width = mf->width;
705 		cfg->try_fmt.height = mf->height;
706 		cfg->try_fmt.code = mf->code;
707 
708 		/* return default mbus frame format updated with pad config */
709 		*mf = ov6650_def_fmt;
710 		mf->width = cfg->try_fmt.width;
711 		mf->height = cfg->try_fmt.height;
712 		mf->code = cfg->try_fmt.code;
713 
714 	} else {
715 		/* apply new media bus format code and frame size */
716 		int ret = ov6650_s_fmt(sd, mf);
717 
718 		if (ret)
719 			return ret;
720 
721 		/* return default format updated with active size and code */
722 		*mf = ov6650_def_fmt;
723 		mf->width = priv->rect.width >> priv->half_scale;
724 		mf->height = priv->rect.height >> priv->half_scale;
725 		mf->code = priv->code;
726 	}
727 	return 0;
728 }
729 
730 static int ov6650_enum_mbus_code(struct v4l2_subdev *sd,
731 		struct v4l2_subdev_pad_config *cfg,
732 		struct v4l2_subdev_mbus_code_enum *code)
733 {
734 	if (code->pad || code->index >= ARRAY_SIZE(ov6650_codes))
735 		return -EINVAL;
736 
737 	code->code = ov6650_codes[code->index];
738 	return 0;
739 }
740 
741 static int ov6650_g_frame_interval(struct v4l2_subdev *sd,
742 				   struct v4l2_subdev_frame_interval *ival)
743 {
744 	struct i2c_client *client = v4l2_get_subdevdata(sd);
745 	struct ov6650 *priv = to_ov6650(client);
746 
747 	ival->interval = priv->tpf;
748 
749 	dev_dbg(&client->dev, "Frame interval: %u/%u s\n",
750 		ival->interval.numerator, ival->interval.denominator);
751 
752 	return 0;
753 }
754 
755 static int ov6650_s_frame_interval(struct v4l2_subdev *sd,
756 				   struct v4l2_subdev_frame_interval *ival)
757 {
758 	struct i2c_client *client = v4l2_get_subdevdata(sd);
759 	struct ov6650 *priv = to_ov6650(client);
760 	struct v4l2_fract *tpf = &ival->interval;
761 	int div, ret;
762 
763 	if (tpf->numerator == 0 || tpf->denominator == 0)
764 		div = 1;  /* Reset to full rate */
765 	else
766 		div = (tpf->numerator * FRAME_RATE_MAX) / tpf->denominator;
767 
768 	if (div == 0)
769 		div = 1;
770 	else if (div > GET_CLKRC_DIV(CLKRC_DIV_MASK))
771 		div = GET_CLKRC_DIV(CLKRC_DIV_MASK);
772 
773 	ret = ov6650_reg_rmw(client, REG_CLKRC, to_clkrc(div), CLKRC_DIV_MASK);
774 	if (!ret) {
775 		priv->tpf.numerator = div;
776 		priv->tpf.denominator = FRAME_RATE_MAX;
777 
778 		*tpf = priv->tpf;
779 	}
780 
781 	return ret;
782 }
783 
784 /* Soft reset the camera. This has nothing to do with the RESET pin! */
785 static int ov6650_reset(struct i2c_client *client)
786 {
787 	int ret;
788 
789 	dev_dbg(&client->dev, "reset\n");
790 
791 	ret = ov6650_reg_rmw(client, REG_COMA, COMA_RESET, 0);
792 	if (ret)
793 		dev_err(&client->dev,
794 			"An error occurred while entering soft reset!\n");
795 
796 	return ret;
797 }
798 
799 /* program default register values */
800 static int ov6650_prog_dflt(struct i2c_client *client, u8 clkrc)
801 {
802 	int ret;
803 
804 	dev_dbg(&client->dev, "initializing\n");
805 
806 	ret = ov6650_reg_write(client, REG_COMA, 0);	/* ~COMA_RESET */
807 	if (!ret)
808 		ret = ov6650_reg_write(client, REG_CLKRC, clkrc);
809 	if (!ret)
810 		ret = ov6650_reg_rmw(client, REG_COMB, 0, COMB_BAND_FILTER);
811 
812 	return ret;
813 }
814 
815 static int ov6650_video_probe(struct v4l2_subdev *sd)
816 {
817 	struct i2c_client *client = v4l2_get_subdevdata(sd);
818 	struct ov6650 *priv = to_ov6650(client);
819 	const struct ov6650_xclk *xclk = NULL;
820 	unsigned long rate;
821 	u8 pidh, pidl, midh, midl;
822 	int i, ret = 0;
823 
824 	priv->clk = v4l2_clk_get(&client->dev, NULL);
825 	if (IS_ERR(priv->clk)) {
826 		ret = PTR_ERR(priv->clk);
827 		dev_err(&client->dev, "v4l2_clk request err: %d\n", ret);
828 		return ret;
829 	}
830 
831 	rate = v4l2_clk_get_rate(priv->clk);
832 	for (i = 0; rate && i < ARRAY_SIZE(ov6650_xclk); i++) {
833 		if (rate != ov6650_xclk[i].rate)
834 			continue;
835 
836 		xclk = &ov6650_xclk[i];
837 		dev_info(&client->dev, "using host default clock rate %lukHz\n",
838 			 rate / 1000);
839 		break;
840 	}
841 	for (i = 0; !xclk && i < ARRAY_SIZE(ov6650_xclk); i++) {
842 		ret = v4l2_clk_set_rate(priv->clk, ov6650_xclk[i].rate);
843 		if (ret || v4l2_clk_get_rate(priv->clk) != ov6650_xclk[i].rate)
844 			continue;
845 
846 		xclk = &ov6650_xclk[i];
847 		dev_info(&client->dev, "using negotiated clock rate %lukHz\n",
848 			 xclk->rate / 1000);
849 		break;
850 	}
851 	if (!xclk) {
852 		dev_err(&client->dev, "unable to get supported clock rate\n");
853 		if (!ret)
854 			ret = -EINVAL;
855 		goto eclkput;
856 	}
857 
858 	ret = ov6650_s_power(sd, 1);
859 	if (ret < 0)
860 		goto eclkput;
861 
862 	msleep(20);
863 
864 	/*
865 	 * check and show product ID and manufacturer ID
866 	 */
867 	ret = ov6650_reg_read(client, REG_PIDH, &pidh);
868 	if (!ret)
869 		ret = ov6650_reg_read(client, REG_PIDL, &pidl);
870 	if (!ret)
871 		ret = ov6650_reg_read(client, REG_MIDH, &midh);
872 	if (!ret)
873 		ret = ov6650_reg_read(client, REG_MIDL, &midl);
874 
875 	if (ret)
876 		goto done;
877 
878 	if ((pidh != OV6650_PIDH) || (pidl != OV6650_PIDL)) {
879 		dev_err(&client->dev, "Product ID error 0x%02x:0x%02x\n",
880 				pidh, pidl);
881 		ret = -ENODEV;
882 		goto done;
883 	}
884 
885 	dev_info(&client->dev,
886 		"ov6650 Product ID 0x%02x:0x%02x Manufacturer ID 0x%02x:0x%02x\n",
887 		pidh, pidl, midh, midl);
888 
889 	ret = ov6650_reset(client);
890 	if (!ret)
891 		ret = ov6650_prog_dflt(client, xclk->clkrc);
892 	if (!ret) {
893 		struct v4l2_mbus_framefmt mf = ov6650_def_fmt;
894 
895 		ret = ov6650_s_fmt(sd, &mf);
896 	}
897 	if (!ret)
898 		ret = v4l2_ctrl_handler_setup(&priv->hdl);
899 
900 done:
901 	ov6650_s_power(sd, 0);
902 	if (!ret)
903 		return 0;
904 eclkput:
905 	v4l2_clk_put(priv->clk);
906 
907 	return ret;
908 }
909 
910 static const struct v4l2_ctrl_ops ov6550_ctrl_ops = {
911 	.g_volatile_ctrl = ov6550_g_volatile_ctrl,
912 	.s_ctrl = ov6550_s_ctrl,
913 };
914 
915 static const struct v4l2_subdev_core_ops ov6650_core_ops = {
916 #ifdef CONFIG_VIDEO_ADV_DEBUG
917 	.g_register		= ov6650_get_register,
918 	.s_register		= ov6650_set_register,
919 #endif
920 	.s_power		= ov6650_s_power,
921 };
922 
923 /* Request bus settings on camera side */
924 static int ov6650_get_mbus_config(struct v4l2_subdev *sd,
925 				  unsigned int pad,
926 				  struct v4l2_mbus_config *cfg)
927 {
928 	struct i2c_client *client = v4l2_get_subdevdata(sd);
929 	u8 comj, comf;
930 	int ret;
931 
932 	ret = ov6650_reg_read(client, REG_COMJ, &comj);
933 	if (ret)
934 		return ret;
935 
936 	ret = ov6650_reg_read(client, REG_COMF, &comf);
937 	if (ret)
938 		return ret;
939 
940 	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_DATA_ACTIVE_HIGH
941 		   | ((comj & COMJ_VSYNC_HIGH)  ? V4L2_MBUS_VSYNC_ACTIVE_HIGH
942 						: V4L2_MBUS_VSYNC_ACTIVE_LOW)
943 		   | ((comf & COMF_HREF_LOW)    ? V4L2_MBUS_HSYNC_ACTIVE_LOW
944 						: V4L2_MBUS_HSYNC_ACTIVE_HIGH)
945 		   | ((comj & COMJ_PCLK_RISING) ? V4L2_MBUS_PCLK_SAMPLE_RISING
946 						: V4L2_MBUS_PCLK_SAMPLE_FALLING);
947 	cfg->type = V4L2_MBUS_PARALLEL;
948 
949 	return 0;
950 }
951 
952 /* Alter bus settings on camera side */
953 static int ov6650_set_mbus_config(struct v4l2_subdev *sd,
954 				  unsigned int pad,
955 				  struct v4l2_mbus_config *cfg)
956 {
957 	struct i2c_client *client = v4l2_get_subdevdata(sd);
958 	int ret = 0;
959 
960 	if (cfg->flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
961 		ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_PCLK_RISING, 0);
962 	else if (cfg->flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
963 		ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_PCLK_RISING);
964 	if (ret)
965 		return ret;
966 
967 	if (cfg->flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
968 		ret = ov6650_reg_rmw(client, REG_COMF, COMF_HREF_LOW, 0);
969 	else if (cfg->flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
970 		ret = ov6650_reg_rmw(client, REG_COMF, 0, COMF_HREF_LOW);
971 	if (ret)
972 		return ret;
973 
974 	if (cfg->flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
975 		ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_VSYNC_HIGH, 0);
976 	else if (cfg->flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
977 		ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_VSYNC_HIGH);
978 	if (ret)
979 		return ret;
980 
981 	/*
982 	 * Update the configuration to report what is actually applied to
983 	 * the hardware.
984 	 */
985 	return ov6650_get_mbus_config(sd, pad, cfg);
986 }
987 
988 static const struct v4l2_subdev_video_ops ov6650_video_ops = {
989 	.s_stream	= ov6650_s_stream,
990 	.g_frame_interval = ov6650_g_frame_interval,
991 	.s_frame_interval = ov6650_s_frame_interval,
992 };
993 
994 static const struct v4l2_subdev_pad_ops ov6650_pad_ops = {
995 	.enum_mbus_code = ov6650_enum_mbus_code,
996 	.get_selection	= ov6650_get_selection,
997 	.set_selection	= ov6650_set_selection,
998 	.get_fmt	= ov6650_get_fmt,
999 	.set_fmt	= ov6650_set_fmt,
1000 	.get_mbus_config = ov6650_get_mbus_config,
1001 	.set_mbus_config = ov6650_set_mbus_config,
1002 };
1003 
1004 static const struct v4l2_subdev_ops ov6650_subdev_ops = {
1005 	.core	= &ov6650_core_ops,
1006 	.video	= &ov6650_video_ops,
1007 	.pad	= &ov6650_pad_ops,
1008 };
1009 
1010 static const struct v4l2_subdev_internal_ops ov6650_internal_ops = {
1011 	.registered = ov6650_video_probe,
1012 };
1013 
1014 /*
1015  * i2c_driver function
1016  */
1017 static int ov6650_probe(struct i2c_client *client,
1018 			const struct i2c_device_id *did)
1019 {
1020 	struct ov6650 *priv;
1021 	int ret;
1022 
1023 	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
1024 	if (!priv)
1025 		return -ENOMEM;
1026 
1027 	v4l2_i2c_subdev_init(&priv->subdev, client, &ov6650_subdev_ops);
1028 	v4l2_ctrl_handler_init(&priv->hdl, 13);
1029 	v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1030 			V4L2_CID_VFLIP, 0, 1, 1, 0);
1031 	v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1032 			V4L2_CID_HFLIP, 0, 1, 1, 0);
1033 	priv->autogain = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1034 			V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
1035 	priv->gain = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1036 			V4L2_CID_GAIN, 0, 0x3f, 1, DEF_GAIN);
1037 	priv->autowb = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1038 			V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
1039 	priv->blue = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1040 			V4L2_CID_BLUE_BALANCE, 0, 0xff, 1, DEF_BLUE);
1041 	priv->red = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1042 			V4L2_CID_RED_BALANCE, 0, 0xff, 1, DEF_RED);
1043 	v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1044 			V4L2_CID_SATURATION, 0, 0xf, 1, 0x8);
1045 	v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1046 			V4L2_CID_HUE, 0, HUE_MASK, 1, DEF_HUE);
1047 	v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1048 			V4L2_CID_BRIGHTNESS, 0, 0xff, 1, 0x80);
1049 	priv->autoexposure = v4l2_ctrl_new_std_menu(&priv->hdl,
1050 			&ov6550_ctrl_ops, V4L2_CID_EXPOSURE_AUTO,
1051 			V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO);
1052 	priv->exposure = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1053 			V4L2_CID_EXPOSURE, 0, 0xff, 1, DEF_AECH);
1054 	v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1055 			V4L2_CID_GAMMA, 0, 0xff, 1, 0x12);
1056 
1057 	priv->subdev.ctrl_handler = &priv->hdl;
1058 	if (priv->hdl.error) {
1059 		ret = priv->hdl.error;
1060 		goto ectlhdlfree;
1061 	}
1062 
1063 	v4l2_ctrl_auto_cluster(2, &priv->autogain, 0, true);
1064 	v4l2_ctrl_auto_cluster(3, &priv->autowb, 0, true);
1065 	v4l2_ctrl_auto_cluster(2, &priv->autoexposure,
1066 				V4L2_EXPOSURE_MANUAL, true);
1067 
1068 	priv->rect.left	  = DEF_HSTRT << 1;
1069 	priv->rect.top	  = DEF_VSTRT << 1;
1070 	priv->rect.width  = W_CIF;
1071 	priv->rect.height = H_CIF;
1072 
1073 	/* Hardware default frame interval */
1074 	priv->tpf.numerator   = GET_CLKRC_DIV(DEF_CLKRC);
1075 	priv->tpf.denominator = FRAME_RATE_MAX;
1076 
1077 	priv->subdev.internal_ops = &ov6650_internal_ops;
1078 
1079 	ret = v4l2_async_register_subdev(&priv->subdev);
1080 	if (!ret)
1081 		return 0;
1082 ectlhdlfree:
1083 	v4l2_ctrl_handler_free(&priv->hdl);
1084 
1085 	return ret;
1086 }
1087 
1088 static int ov6650_remove(struct i2c_client *client)
1089 {
1090 	struct ov6650 *priv = to_ov6650(client);
1091 
1092 	v4l2_clk_put(priv->clk);
1093 	v4l2_async_unregister_subdev(&priv->subdev);
1094 	v4l2_ctrl_handler_free(&priv->hdl);
1095 	return 0;
1096 }
1097 
1098 static const struct i2c_device_id ov6650_id[] = {
1099 	{ "ov6650", 0 },
1100 	{ }
1101 };
1102 MODULE_DEVICE_TABLE(i2c, ov6650_id);
1103 
1104 static struct i2c_driver ov6650_i2c_driver = {
1105 	.driver = {
1106 		.name = "ov6650",
1107 	},
1108 	.probe    = ov6650_probe,
1109 	.remove   = ov6650_remove,
1110 	.id_table = ov6650_id,
1111 };
1112 
1113 module_i2c_driver(ov6650_i2c_driver);
1114 
1115 MODULE_DESCRIPTION("V4L2 subdevice driver for OmniVision OV6650 camera sensor");
1116 MODULE_AUTHOR("Janusz Krzysztofik <jmkrzyszt@gmail.com");
1117 MODULE_LICENSE("GPL v2");
1118