| /openbmc/u-boot/board/dhelectronics/dh_imx6/ |
| H A D | dh_imx6.c | 41 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) macro
45 .i2c_mode = MX6DL_PAD_EIM_D21__I2C1_SCL | PC,
46 .gpio_mode = MX6DL_PAD_EIM_D21__GPIO3_IO21 | PC,
50 .i2c_mode = MX6DL_PAD_EIM_D28__I2C1_SDA | PC,
51 .gpio_mode = MX6DL_PAD_EIM_D28__GPIO3_IO28 | PC,
58 .i2c_mode = MX6DL_PAD_KEY_COL3__I2C2_SCL | PC,
59 .gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | PC,
63 .i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | PC,
64 .gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | PC,
71 .i2c_mode = MX6DL_PAD_GPIO_3__I2C3_SCL | PC,
[all …]
|
| /openbmc/linux/drivers/pinctrl/freescale/ |
| H A D | pinctrl-imx1.c | 17 #define PC 2 macro
77 MX1_PAD_SSI_RXFS = PAD_ID(PC, 3),
78 MX1_PAD_SSI_RXCLK = PAD_ID(PC, 4),
79 MX1_PAD_SSI_RXDAT = PAD_ID(PC, 5),
80 MX1_PAD_SSI_TXDAT = PAD_ID(PC, 6),
81 MX1_PAD_SSI_TXFS = PAD_ID(PC, 7),
82 MX1_PAD_SSI_TXCLK = PAD_ID(PC, 8),
83 MX1_PAD_UART1_CTS = PAD_ID(PC, 9),
84 MX1_PAD_UART1_RTS = PAD_ID(PC, 10),
85 MX1_PAD_UART1_TXD = PAD_ID(PC, 11),
[all …]
|
| H A D | pinctrl-imx27.c | 21 #define PC 2 macro
89 MX27_PAD_I2C2_SDA = PAD_ID(PC, 5),
90 MX27_PAD_I2C2_SCL = PAD_ID(PC, 6),
91 MX27_PAD_USBOTG_DATA5 = PAD_ID(PC, 7),
92 MX27_PAD_USBOTG_DATA6 = PAD_ID(PC, 8),
93 MX27_PAD_USBOTG_DATA0 = PAD_ID(PC, 9),
94 MX27_PAD_USBOTG_DATA2 = PAD_ID(PC, 10),
95 MX27_PAD_USBOTG_DATA1 = PAD_ID(PC, 11),
96 MX27_PAD_USBOTG_DATA4 = PAD_ID(PC, 12),
97 MX27_PAD_USBOTG_DATA3 = PAD_ID(PC, 13),
[all …]
|
| /openbmc/linux/tools/testing/selftests/kvm/aarch64/ |
| H A D | debug-exceptions.c | 38 #define PC(v) ((uint64_t)&(v)) macro
244 GUEST_ASSERT_EQ(sw_bp_addr, PC(sw_bp)); in guest_code()
248 install_hw_bp(bpn, PC(hw_bp)); in guest_code()
250 GUEST_ASSERT_EQ(hw_bp_addr, PC(hw_bp)); in guest_code()
254 install_hw_bp(bpn, PC(bp_svc)); in guest_code()
256 GUEST_ASSERT_EQ(hw_bp_addr, PC(bp_svc)); in guest_code()
257 GUEST_ASSERT_EQ(svc_addr, PC(bp_svc) + 4); in guest_code()
261 install_hw_bp(bpn, PC(bp_brk)); in guest_code()
263 GUEST_ASSERT_EQ(sw_bp_addr, PC(bp_brk)); in guest_code()
264 GUEST_ASSERT_EQ(hw_bp_addr, PC(bp_brk)); in guest_code()
[all …]
|
| /openbmc/u-boot/board/ccv/xpress/ |
| H A D | xpress.c | 59 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) macro
63 .i2c_mode = MX6_PAD_GPIO1_IO02__I2C1_SCL | PC,
64 .gpio_mode = MX6_PAD_GPIO1_IO02__GPIO1_IO02 | PC,
68 .i2c_mode = MX6_PAD_GPIO1_IO03__I2C1_SDA | PC,
69 .gpio_mode = MX6_PAD_GPIO1_IO03__GPIO1_IO03 | PC,
76 .i2c_mode = MX6_PAD_GPIO1_IO00__I2C2_SCL | PC,
77 .gpio_mode = MX6_PAD_GPIO1_IO00__GPIO1_IO00 | PC,
81 .i2c_mode = MX6_PAD_GPIO1_IO01__I2C2_SDA | PC,
82 .gpio_mode = MX6_PAD_GPIO1_IO01__GPIO1_IO01 | PC,
89 .i2c_mode = MX6_PAD_UART2_TX_DATA__I2C4_SCL | PC,
[all …]
|
| /openbmc/u-boot/board/liebherr/display5/ |
| H A D | display5.c | 122 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) macro
126 .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC,
127 .gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC,
131 .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC,
132 .gpio_mode = MX6_PAD_EIM_D28__GPIO3_IO28 | PC,
140 .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC,
141 .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC,
145 .i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC,
146 .gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC,
154 .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC,
[all …]
|
| /openbmc/linux/Documentation/admin-guide/media/ |
| H A D | gspca-cardlist.rst | 24 spca500 041e:400a Creative PC-CAM 300
25 sunplus 041e:400b Creative PC-CAM 600
26 sunplus 041e:4012 PC-Cam350
225 gl860 05e3:0503 Genesys Logic PC Camera
226 gl860 05e3:f191 Genesys Logic PC Camera
230 topro 06a2:0003 TP6800 PC Camera, CmoX CX0342 webcam
251 spca505 0733:0430 Intel PC Camera Pro
297 pac7311 093a:260e Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
322 zc3xx 0ac8:307b PC Camera (ZS0211)
334 sonixb 0c45:6011 Microdia PC Camera (SN9C102)
[all …]
|
| /openbmc/u-boot/board/k+p/kp_imx6q_tpc/ |
| H A D | kp_imx6q_tpc.c | 41 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) macro
45 .i2c_mode = MX6Q_PAD_CSI0_DAT9__I2C1_SCL | PC,
46 .gpio_mode = MX6Q_PAD_CSI0_DAT9__GPIO5_IO27 | PC,
50 .i2c_mode = MX6Q_PAD_CSI0_DAT8__I2C1_SDA | PC,
51 .gpio_mode = MX6Q_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
58 .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
59 .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | PC,
63 .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
64 .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC,
|
| /openbmc/u-boot/board/kosagi/novena/ |
| H A D | novena_spl.c | 68 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) macro
200 .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC,
201 .gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC,
205 .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC,
206 .gpio_mode = MX6_PAD_EIM_D28__GPIO3_IO28 | PC,
219 .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC,
220 .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC,
224 .i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC,
225 .gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC,
238 .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC,
[all …]
|
| /openbmc/u-boot/board/aristainetos/ |
| H A D | aristainetos.c | 55 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) macro
70 .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC,
71 .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC,
75 .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC,
76 .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
83 .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC,
84 .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC,
88 .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC,
89 .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | PC,
|
| /openbmc/u-boot/board/barco/titanium/ |
| H A D | titanium.c | 61 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) macro
65 .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC,
66 .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC,
70 .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC,
71 .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
78 .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC,
79 .gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC,
83 .i2c_mode = MX6_PAD_GPIO_16__I2C3_SDA | PC,
84 .gpio_mode = MX6_PAD_GPIO_16__GPIO7_IO11 | PC,
|
| /openbmc/u-boot/board/bachmann/ot1200/ |
| H A D | ot1200.c | 122 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) macro
127 .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC,
128 .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC,
132 .i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC,
133 .gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC,
141 .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC,
142 .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC,
146 .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
147 .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
|
| /openbmc/u-boot/board/freescale/mx6sabreauto/ |
| H A D | mx6sabreauto.c | 57 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) macro
98 .i2c_mode = MX6Q_PAD_EIM_EB2__I2C2_SCL | PC,
99 .gpio_mode = MX6Q_PAD_EIM_EB2__GPIO2_IO30 | PC,
103 .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
104 .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC,
111 .i2c_mode = MX6DL_PAD_EIM_EB2__I2C2_SCL | PC,
112 .gpio_mode = MX6DL_PAD_EIM_EB2__GPIO2_IO30 | PC,
116 .i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | PC,
117 .gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | PC,
129 .i2c_mode = MX6Q_PAD_GPIO_3__I2C3_SCL | PC,
[all …]
|
| /openbmc/u-boot/board/warp/ |
| H A D | warp.c | 101 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) macro
104 .i2c_mode = MX6_PAD_I2C1_SDA__I2C1_SDA | PC,
105 .gpio_mode = MX6_PAD_I2C1_SDA__GPIO_3_13 | PC,
109 .i2c_mode = MX6_PAD_I2C1_SCL__I2C1_SCL | PC,
110 .gpio_mode = MX6_PAD_I2C1_SCL__GPIO_3_12 | PC,
|
| /openbmc/qemu/docs/system/arm/ |
| H A D | orangepi.rst | 1 Orange Pi PC (``orangepi-pc``)
4 The Xunlong Orange Pi PC is an Allwinner H3 System on Chip
13 The Orange Pi PC machine supports the following devices:
34 Currently, Orange Pi PC does *not* support the following features:
46 The Orange Pi PC machine can start using the standard -kernel functionality
47 for loading a Linux kernel or ELF executable. Additionally, the Orange Pi PC
59 The Allwinner RTC device is automatically created by the Orange Pi PC machine
82 To build a Linux mainline kernel that can be booted by the Orange Pi PC machine,
107 To boot the newly build linux kernel in QEMU with the Orange Pi PC machine, use:
116 Orange Pi PC images
[all …]
|
| /openbmc/u-boot/board/freescale/p1_p2_rdb_pc/ |
| H A D | README | 4 P1020MSBG-PC
5 P1020RDB-PC
7 P1020UTM-PC
8 P1021RDB-PC
11 P2020RDB-PC
13 They have similar design of P1020RDB but have DDR3 instead of DDR2. P2020RDB-PC
|
| /openbmc/u-boot/board/gateworks/gw_ventana/ |
| H A D | common.c | 90 .i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC,
91 .gpio_mode = MX6Q_PAD_EIM_D21__GPIO3_IO21 | PC,
95 .i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC,
96 .gpio_mode = MX6Q_PAD_EIM_D28__GPIO3_IO28 | PC,
101 .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
102 .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | PC,
106 .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
107 .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC,
112 .i2c_mode = MX6Q_PAD_GPIO_3__I2C3_SCL | PC,
113 .gpio_mode = MX6Q_PAD_GPIO_3__GPIO1_IO03 | PC,
[all …]
|
| /openbmc/linux/drivers/ata/pata_parport/ |
| H A D | bpck.c | 20 #undef PC
22 #define PC pi->private macro
23 #define r2() (PC=(in_p(2) & 0xff))
24 #define w2(byte) {out_p(2,byte); PC = byte;}
25 #define t2(pat) {PC ^= pat; out_p(2,PC);}
26 #define e2() {PC &= 0xfe; out_p(2,PC);}
27 #define o2() {PC |= 1; out_p(2,PC);}
|
| /openbmc/u-boot/board/toradex/apalis_imx6/ |
| H A D | apalis_imx6.c | 106 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) macro
110 .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC,
111 .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC,
115 .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC,
116 .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
124 .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC,
125 .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC,
129 .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC,
130 .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | PC,
138 .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC,
[all …]
|
| /openbmc/u-boot/board/freescale/imx8mq_evk/ |
| H A D | spl.c | 40 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) macro
43 .i2c_mode = IMX8MQ_PAD_I2C1_SCL__I2C1_SCL | PC,
44 .gpio_mode = IMX8MQ_PAD_I2C1_SCL__GPIO5_IO14 | PC,
48 .i2c_mode = IMX8MQ_PAD_I2C1_SDA__I2C1_SDA | PC,
49 .gpio_mode = IMX8MQ_PAD_I2C1_SDA__GPIO5_IO15 | PC,
|
| /openbmc/linux/arch/mips/loongson2ef/ |
| H A D | Kconfig | 8 bool "Lemote Fuloong(2e) mini-PC"
32 Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and
35 Lemote Fuloong(2e) mini PC have a VIA686B south bridge.
67 These family machines include fuloong2f mini PC, yeeloong2f notebook,
68 LingLoong allinone PC and so forth.
|
| /openbmc/qemu/linux-user/mips/ |
| H A D | cpu_loop.c | 44 target_ulong pc = env->active_tc.PC; in do_tr_or_bp()
81 env->active_tc.PC += 4; in cpu_loop()
140 env->active_tc.PC -= 4; in cpu_loop()
166 env->active_tc.PC); in cpu_loop()
181 force_sig_fault(TARGET_SIGFPE, si_code, env->active_tc.PC); in cpu_loop()
184 force_sig_fault(TARGET_SIGFPE, TARGET_FPE_INTOVF, env->active_tc.PC); in cpu_loop()
252 env->active_tc.PC = regs->cp0_epc & ~(target_ulong)1; in target_cpu_copy_regs()
|
| /openbmc/linux/Documentation/networking/ |
| H A D | 6pack.rst | 20 6pack is a transmission protocol for data exchange between the PC and
25 - The PC is given full control over the radio
26 channel. Special control data is exchanged between the PC and the TNC so
27 that the PC knows at any time if the TNC is receiving data, if a TNC
32 algorithms as everything is computed in the PC. It would even be possible
36 TNCs that are connected between each other and the PC by a daisy chain
42 Damaged packets that the TNC has received from the PC are not transmitted.
52 Matthias Welwarsky DG2FEF, comes along with the PC version of FlexNet.
69 available on any packet radio box where PC/FlexNet can be found. The name of
72 with PC/FlexNet. Please do not ask me about the internals of this file as I
[all …]
|
| /openbmc/linux/drivers/accessibility/speakup/ |
| H A D | Kconfig | 18 external (old), Dectalk PC (full length isa board),
20 Litetalk, Keynote Gold internal PC, software
60 tristate "Accent PC synthesizer support"
114 tristate "DECtalk PC (big ISA card) synthesizer support"
117 This is the Speakup driver for the DecTalk PC (full
122 In order to use the DecTalk PC driver, you must download
126 DecTalk PC board in order to use it with this driver.
129 PC software has been pre-loaded on to the board.
135 tristate "DoubleTalk PC synthesizer support"
140 PC synthesizer. You can say y to build it into the
[all …]
|
| /openbmc/u-boot/board/boundary/nitrogen6x/ |
| H A D | nitrogen6x.c | 86 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) macro
91 .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC,
92 .gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC,
96 .i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC,
97 .gpio_mode = MX6_PAD_EIM_D28__GPIO3_IO28 | PC,
105 .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC,
106 .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC,
110 .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC,
111 .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | PC,
119 .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL | PC,
[all …]
|