Merge branch 'ocelot-phylink-fixes'

Colin Foster says:

====================
ocelot phylink fixes

When the ocelot driver was migrated to phylink, e6e12df625f2 ("net:
mscc: ocelot: convert to phylin

Merge branch 'ocelot-phylink-fixes'

Colin Foster says:

====================
ocelot phylink fixes

When the ocelot driver was migrated to phylink, e6e12df625f2 ("net:
mscc: ocelot: convert to phylink") there were two additional writes to
registers that became stale. One write was to DEV_CLOCK_CFG and one was
to ANA_PFC_PCF_CFG.

Both of these writes referenced the variable "speed" which originally
was set to OCELOT_SPEED_{10,100,1000,2500}. These macros expand to
values of 3, 2, 1, or 0, respectively. After the update, the variable
speed is set to SPEED_{10,100,1000,2500} which expand to 10, 100, 1000,
and 2500. So invalid values were getting written to the two registers,
which would lead to either a lack of functionality or undefined
funcationality.

Fixing these values was the intent of v1 of this patch set - submitted
as "[PATCH v1 net] net: ethernet: mscc: ocelot: bug fix when writing MAC
speed"

During that review it was determined that both writes were actually
unnecessary. DEV_CLOCK_CFG is a duplicate write, so can be removed
entirely. This was accidentally submitted as as a new, lone patch titled
"[PATCH v1 net] net: mscc: ocelot: remove buggy duplicate write to
DEV_CLOCK_CFG". This is part of what is considered v2 of this patch set.

Additionally, the write to ANA_PFC_PFC_CFG is also unnecessary. Priority
flow contol is disabled, so configuring it is useless and should be
removed. This was also submitted as a new, lone patch titled "[PATCH v1
net] net: mscc: ocelot: remove buggy and useless write to ANA_PFC_PFC_CFG".
This is the rest of what is considered v2 of this patch set.

v3
Identical to v2, but fixes the patch numbering to v3 and submitting the
two changes as a patch set.

v2
Note: I misunderstood and submitted two new "v1" patches instead of a
single "v2" patch set.
- Remove the buggy writes altogher
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: mscc: ocelot: remove buggy duplicate write to DEV_CLOCK_CFG

When updating ocelot to use phylink, a second write to DEV_CLOCK_CFG was
mistakenly left in. It used the variable "speed" which, prev

net: mscc: ocelot: remove buggy duplicate write to DEV_CLOCK_CFG

When updating ocelot to use phylink, a second write to DEV_CLOCK_CFG was
mistakenly left in. It used the variable "speed" which, previously, would
would have been assigned a value of OCELOT_SPEED_1000. In phylink the
variable is be SPEED_1000, which is invalid for the
DEV_CLOCK_LINK_SPEED macro. Removing it as unnecessary and buggy.

Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: mscc: ocelot: remove buggy and useless write to ANA_PFC_PFC_CFG

A useless write to ANA_PFC_PFC_CFG was left in while refactoring ocelot to
phylink. Since priority flow control is disabled, writ

net: mscc: ocelot: remove buggy and useless write to ANA_PFC_PFC_CFG

A useless write to ANA_PFC_PFC_CFG was left in while refactoring ocelot to
phylink. Since priority flow control is disabled, writing the speed has no
effect.

Further, it was using ethtool.h SPEED_ instead of OCELOT_SPEED_ macros,
which are incorrectly offset for GENMASK.

Lastly, for priority flow control to properly function, some scenarios
would rely on the rate adaptation from the PCS while the MAC speed would
be fixed. So it isn't used, and even if it was, neither "speed" nor
"mac_speed" are necessarily the correct values to be used.

Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink")
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge drm/drm-next into drm-intel-next

Catch-up on 5.15-rc1 and sync with drm-intel-gt-next
to prepare the PXP topic branch.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Close the divergence which has caused patches not to apply and
have a solid baseline for the PXP patches that Rodrigo will send
a topic branch PR for.

Sign

Merge drm/drm-next into drm-intel-gt-next

Close the divergence which has caused patches not to apply and
have a solid baseline for the PXP patches that Rodrigo will send
a topic branch PR for.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-misc-next

Kickstart new drm-misc-next cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge branch 'linus' into smp/urgent

Ensure that all usage sites of get/put_online_cpus() except for the
struggler in drivers/thermal are gone. So the last user and the deprecated
inlines can be rem

Merge branch 'linus' into smp/urgent

Ensure that all usage sites of get/put_online_cpus() except for the
struggler in drivers/thermal are gone. So the last user and the deprecated
inlines can be removed.

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.15 merge window.

Merge tag 'asoc-v5.15' into asoc-5.15

ASoC: Updates for v5.15

Quite a quiet release this time, mostly a combination of cleanups
and a good set of new drivers.

- Lots of cleanups and improvements

Merge tag 'asoc-v5.15' into asoc-5.15

ASoC: Updates for v5.15

Quite a quiet release this time, mostly a combination of cleanups
and a good set of new drivers.

- Lots of cleanups and improvements to the Intel drivers,
including some new systems support.
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek
Mt8195, Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P,
Renesas RZ/G2L,, Rockchip RK3568 S/PDIF.

show more ...

Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Enable memcg accounting for various networking o

Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Enable memcg accounting for various networking objects.

BPF:

- Introduce bpf timers.

- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.

- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.

- Add support for UNIX sockets for BPF sockmap.

- Extend BPF iterator support for UNIX domain sockets.

- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.

Protocols:

- Support IOAM Pre-allocated Trace with IPv6.

- Support Management Component Transport Protocol.

- bridge: multicast: add vlan support.

- netfilter: add hooks for the SRv6 lightweight tunnel driver.

- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP

- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing

- af_unix: add OOB notification support.

- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.

- mac80211: Target Wake Time support in AP mode.

- can: j1939: extend UAPI to notify about RX status.

Driver APIs:

- Add page frag support in page pool API.

- Many improvements to the DSA (distributed switch) APIs.

- ethtool: extend IRQ coalesce uAPI with timer reset modes.

- devlink: control which auxiliary devices are created.

- Support CAN PHYs via the generic PHY subsystem.

- Proper cross-chip support for tag_8021q.

- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.

Drivers:

- veth: more flexible channels number configuration.

- openvswitch: introduce per-cpu upcall dispatch.

- Add internet mix (IMIX) mode to pktgen.

- Transparently handle XDP operations in the bonding driver.

- Add LiteETH network driver.

- Renesas (ravb):
- support Gigabit Ethernet IP

- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge

- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation

- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings

- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels

- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state

- Netronome Ethernet (nfp):
- add conntrack offload support

- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device

- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)

- Xen pv driver:
- harden netfront against malicious backends

- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces

Refactor:

- Ambient BPF run context and cgroup storage cleanup.

- Compat rework for ndo_ioctl.

Old code removal:

- prism54 remove the obsoleted driver, deprecated by the p54 driver.

- wan: remove sbni/granch driver"

* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...

show more ...

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up fixes.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'asoc-v5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.15

Quite a quiet release this time, mostly a combination of cleanups
and

Merge tag 'asoc-v5.15' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.15

Quite a quiet release this time, mostly a combination of cleanups
and a good set of new drivers.

- Lots of cleanups and improvements to the Intel drivers,
including some new systems support.
- New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek
Mt8195, Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P,
Renesas RZ/G2L,, Rockchip RK3568 S/PDIF.

show more ...

Merge branch 'perf/urgent' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge 5.14-rc7 into char-misc-next

We need the char/misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 5.14-rc7 into usb-next

We need the USB fix in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge branch 'torvalds:master' into master

Merge branch 'ocelot-vlan'

Vladimir Oltean says:

====================
Small ocelot VLAN improvements

This small series propagates some VLAN restrictions via netlink extack
and creates some helper

Merge branch 'ocelot-vlan'

Vladimir Oltean says:

====================
Small ocelot VLAN improvements

This small series propagates some VLAN restrictions via netlink extack
and creates some helper functions instead of open-coding VLAN table
manipulations from multiple places.

This is split from the larger "DSA FDB isolation" series, hence the v2
tag:
https://patchwork.kernel.org/project/netdevbpf/cover/20210818120150.892647-1-vladimir.oltean@nxp.com/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: mscc: ocelot: use helpers for port VLAN membership

This is a mostly cosmetic patch that creates some helpers for accessing
the VLAN table. These helpers are also a bit more careful in that they

net: mscc: ocelot: use helpers for port VLAN membership

This is a mostly cosmetic patch that creates some helpers for accessing
the VLAN table. These helpers are also a bit more careful in that they
do not modify the ocelot->vlan_mask unless the hardware operation
succeeded.

Not all callers check the return value (the init code doesn't), but anyway.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: mscc: ocelot: transmit the VLAN filtering restrictions via extack

We need to transmit more restrictions in future patches, convert this
one to netlink extack.

Signed-off-by: Vladimir Oltean <v

net: mscc: ocelot: transmit the VLAN filtering restrictions via extack

We need to transmit more restrictions in future patches, convert this
one to netlink extack.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: mscc: ocelot: transmit the "native VLAN" error via extack

We need to reject some more configurations in future patches, convert
the existing one to netlink extack.

Signed-off-by: Vladimir Olte

net: mscc: ocelot: transmit the "native VLAN" error via extack

We need to reject some more configurations in future patches, convert
the existing one to netlink extack.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

drivers/ptp/Kconfig:
55c8fca1dae1 ("ptp_pch: Restore dependency on PCI")
e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies")

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

drivers/ptp/Kconfig:
55c8fca1dae1 ("ptp_pch: Restore dependency on PCI")
e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies")

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'net-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from bpf, wireless and mac80211

Merge tag 'net-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from bpf, wireless and mac80211
trees.

Current release - regressions:

- tipc: call tipc_wait_for_connect only when dlen is not 0

- mac80211: fix locking in ieee80211_restart_work()

Current release - new code bugs:

- bpf: add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id()

- ethernet: ice: fix perout start time rounding

- wwan: iosm: prevent underflow in ipc_chnl_cfg_get()

Previous releases - regressions:

- bpf: clear zext_dst of dead insns

- sch_cake: fix srchost/dsthost hashing mode

- vrf: reset skb conntrack connection on VRF rcv

- net/rds: dma_map_sg is entitled to merge entries

Previous releases - always broken:

- ethernet: bnxt: fix Tx path locking and races, add Rx path
barriers"

* tag 'net-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
net: dpaa2-switch: disable the control interface on error path
Revert "flow_offload: action should not be NULL when it is referenced"
iavf: Fix ping is lost after untrusted VF had tried to change MAC
i40e: Fix ATR queue selection
r8152: fix the maximum number of PLA bp for RTL8153C
r8152: fix writing USB_BP2_EN
mptcp: full fully established support after ADD_ADDR
mptcp: fix memory leak on address flush
net/rds: dma_map_sg is entitled to merge entries
net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU port
net: asix: fix uninit value bugs
ovs: clear skb->tstamp in forwarding path
net: mdio-mux: Handle -EPROBE_DEFER correctly
net: mdio-mux: Don't ignore memory allocation errors
net: mdio-mux: Delete unnecessary devm_kfree
net: dsa: sja1105: fix use-after-free after calling of_find_compatible_node, or worse
sch_cake: fix srchost/dsthost hashing mode
ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error path
net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32
mac80211: fix locking in ieee80211_restart_work()
...

show more ...

net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU port

Currently we are unable to ping a bridge on top of a felix switch which
uses the ocelot-8021q tagger. The packets are

net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU port

Currently we are unable to ping a bridge on top of a felix switch which
uses the ocelot-8021q tagger. The packets are dropped on the ingress of
the user port and the 'drop_local' counter increments (the counter which
denotes drops due to no valid destinations).

Dumping the PGID tables, it becomes clear that the PGID_SRC of the user
port is zero, so it has no valid destinations.

But looking at the code, the cpu_fwd_mask (the bit mask of DSA tag_8021q
ports) is clearly missing from the forwarding mask of ports that are
under a bridge. So this has always been broken.

Looking at the version history of the patch, in v7
https://patchwork.kernel.org/project/netdevbpf/patch/20210125220333.1004365-12-olteanv@gmail.com/
the code looked like this:

/* Standalone ports forward only to DSA tag_8021q CPU ports */
unsigned long mask = cpu_fwd_mask;

(...)
} else if (ocelot->bridge_fwd_mask & BIT(port)) {
mask |= ocelot->bridge_fwd_mask & ~BIT(port);

while in v8 (the merged version)
https://patchwork.kernel.org/project/netdevbpf/patch/20210129010009.3959398-12-olteanv@gmail.com/
it looked like this:

unsigned long mask;

(...)
} else if (ocelot->bridge_fwd_mask & BIT(port)) {
mask = ocelot->bridge_fwd_mask & ~BIT(port);

So the breakage was introduced between v7 and v8 of the patch.

Fixes: e21268efbe26 ("net: dsa: felix: perform switch setup for tag_8021q")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210817160425.3702809-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

Merge tag 'v5.14-rc6' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'ocelot-phylink'

Vladimir Oltean says:

====================
Convert ocelot to phylink

The ocelot switchdev and felix dsa drivers are interesting because they
target the same class of

Merge branch 'ocelot-phylink'

Vladimir Oltean says:

====================
Convert ocelot to phylink

The ocelot switchdev and felix dsa drivers are interesting because they
target the same class of hardware switches but used in different modes.

Colin has an interesting use case where he wants to use a hardware
switch supported by the ocelot switchdev driver with the felix dsa
driver.

So far, the existing hardware revisions were similar between the ocelot
and felix drivers, but not completely identical. With identical hardware,
it is absurd that the felix driver uses phylink while the ocelot driver
uses phylib - this should not be one of the differences between the
switchdev and dsa driver, and we could eliminate it.

Colin will need the common phylink support in ocelot and felix when
adding a phylink_pcs driver for the PCS1G block inside VSC7514, which
will make the felix driver work with either the NXP or the Microchip PCS.

As usual, Alex, Horatiu, sorry for bugging you, but it would be
appreciated if you could give this a quick run on actual VSC7514
hardware (which I don't have) to make sure I'm not introducing any
breakage.
====================

Fixes: 0f06a6787e05 ("samples: Add an IPv6 "-6" option to the pktgen scripts")
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...