Merge tag 'v6.6.66' into for/openbmc/dev-6.6

This is the 6.6.66 stable release

can: m_can: m_can_handle_lec_err(): fix {rx,tx}_errors statistics

[ Upstream commit 988d4222bf9039a875a3d48f2fe35c317831ff68 ]

The m_can_handle_lec_err() function was incorrectly incrementing only

can: m_can: m_can_handle_lec_err(): fix {rx,tx}_errors statistics

[ Upstream commit 988d4222bf9039a875a3d48f2fe35c317831ff68 ]

The m_can_handle_lec_err() function was incorrectly incrementing only the
receive error counter, even in cases of bit or acknowledgment errors that
occur during transmission.

Fix the issue by incrementing the appropriate counter based on the
type of error.

Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://patch.msgid.link/20241122221650.633981-7-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.61' into for/openbmc/dev-6.6

This is the 6.6.61 stable release

can: m_can: m_can_close(): don't call free_irq() for IRQ-less devices

commit e4de81f9e134c78ff7c75a00e43bd819643530d0 upstream.

In commit b382380c0d2d ("can: m_can: Add hrtimer to generate software

can: m_can: m_can_close(): don't call free_irq() for IRQ-less devices

commit e4de81f9e134c78ff7c75a00e43bd819643530d0 upstream.

In commit b382380c0d2d ("can: m_can: Add hrtimer to generate software
interrupt") support for IRQ-less devices was added. Instead of an
interrupt, the interrupt routine is called by a hrtimer-based polling
loop.

That patch forgot to change free_irq() to be only called for devices
with IRQs. Fix this, by calling free_irq() conditionally only if an
IRQ is available for the device (and thus has been requested
previously).

Fixes: b382380c0d2d ("can: m_can: Add hrtimer to generate software interrupt")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://patch.msgid.link/20240930-m_can-cleanups-v1-1-001c579cdee4@pengutronix.de
Cc: <stable@vger.kernel.org> # v6.6+
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'v6.6.54' into for/openbmc/dev-6.6

This is the 6.6.54 stable release

can: m_can: m_can_close(): stop clocks after device has been shut down

[ Upstream commit 2c09b50efcad985cf920ca88baa9aa52b1999dcc ]

After calling m_can_stop() an interrupt may be pending or NAPI mi

can: m_can: m_can_close(): stop clocks after device has been shut down

[ Upstream commit 2c09b50efcad985cf920ca88baa9aa52b1999dcc ]

After calling m_can_stop() an interrupt may be pending or NAPI might
still be executed. This means the driver might still touch registers
of the IP core after the clocks have been disabled. This is not good
practice and might lead to aborts depending on the SoC integration.

To avoid these potential problems, make m_can_close() symmetric to
m_can_open(), i.e. stop the clocks at the end, right before shutting
down the transceiver.

Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Link: https://patch.msgid.link/20240910-can-m_can-fix-ifup-v3-2-6c1720ba45ce@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

can: m_can: enable NAPI before enabling interrupts

[ Upstream commit 801ad2f87b0c6d0c34a75a4efd6bfd3a2d9f9298 ]

If an interrupt (RX-complete or error flag) is set when bringing up
the CAN device, e

can: m_can: enable NAPI before enabling interrupts

[ Upstream commit 801ad2f87b0c6d0c34a75a4efd6bfd3a2d9f9298 ]

If an interrupt (RX-complete or error flag) is set when bringing up
the CAN device, e.g. due to CAN bus traffic before initializing the
device, when m_can_start() is called and interrupts are enabled,
m_can_isr() is called immediately, which disables all CAN interrupts
and calls napi_schedule().

Because napi_enable() isn't called until later in m_can_open(), the
call to napi_schedule() never schedules the m_can_poll() callback and
the device is left with interrupts disabled and can't receive any CAN
packets until rebooted.

This can be verified by running "cansend" from another device before
setting the bitrate and calling "ip link set up can0" on the test
device. Adding debug lines to m_can_isr() shows it's called with flags
(IR_EP | IR_EW | IR_CRCE), which calls m_can_disable_all_interrupts()
and napi_schedule(), and then m_can_poll() is never called.

Move the call to napi_enable() above the call to m_can_start() to
enable any initial interrupt flags to be handled by m_can_poll() so
that interrupts are reenabled. Add a call to napi_disable() in the
error handling section of m_can_open(), to handle the case where later
functions return errors.

Also, in m_can_close(), move the call to napi_disable() below the call
to m_can_stop() to ensure all interrupts are handled when bringing
down the device. This race condition is much less likely to occur.

Tested on a Microchip SAMA7G54 MPU. The fix should be applicable to
any SoC with a Bosch M_CAN controller.

Signed-off-by: Jake Hamby <Jake.Hamby@Teledyne.com>
Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support")
Link: https://patch.msgid.link/20240910-can-m_can-fix-ifup-v3-1-6c1720ba45ce@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.51' into for/openbmc/dev-6.6

This is the 6.6.51 stable release

can: m_can: Release irq on error in m_can_open

[ Upstream commit 06d4ef3056a7ac31be331281bb7a6302ef5a7f8a ]

It appears that the irq requested in m_can_open() may be leaked
if an error subsequently

can: m_can: Release irq on error in m_can_open

[ Upstream commit 06d4ef3056a7ac31be331281bb7a6302ef5a7f8a ]

It appears that the irq requested in m_can_open() may be leaked
if an error subsequently occurs: if m_can_start() fails.

Address this by calling free_irq in the unwind path for
such cases.

Flagged by Smatch.
Compile tested only.

Fixes: eaacfeaca7ad ("can: m_can: Call the RAM init directly from m_can_chip_config")
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20240805-mcan-irq-v2-1-7154c0484819@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge tag 'v6.6.23' into dev-6.6

Linux 6.6.23

can: m_can: Start/Cancel polling timer together with interrupts

[ Upstream commit a163c5761019b94258ca655b27b46e82657fd6f5 ]

Interrupts are enabled/disabled in more places than just m_can_start()
a

can: m_can: Start/Cancel polling timer together with interrupts

[ Upstream commit a163c5761019b94258ca655b27b46e82657fd6f5 ]

Interrupts are enabled/disabled in more places than just m_can_start()
and m_can_stop(). Couple the polling timer with enabling/disabling of
all interrupts to achieve equivalent behavior.

Cc: Judith Mendez <jm@ti.com>
Fixes: b382380c0d2d ("can: m_can: Add hrtimer to generate software interrupt")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20240207093220.2681425-2-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocat

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations

- Store netdevs in an xarray, to simplify iterating over netdevs

- Refactor nexthop selection for multipath routes

- Improve sched class lifetime handling

- Add backup nexthop ID support for bridge

- Implement drop reasons support in openvswitch

- Several data races annotations and fixes

- Constify the sk parameter of routing functions

- Prepend kernel version to netconsole message

Protocols:

- Implement support for TCP probing the peer being under memory
pressure

- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct

- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor

- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes

- In-kernel support for the TLS alert protocol

- Better support for UDP reuseport with connected sockets

- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size

- Get rid of additional ancillary per MPTCP connection struct socket

- Implement support for BPF-based MPTCP packet schedulers

- Format MPTCP subtests selftests results in TAP

- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation

BPF:

- Multi-buffer support in AF_XDP

- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds

- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it

- Add SO_REUSEPORT support for TC bpf_sk_assign

- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64

- Support defragmenting IPv(4|6) packets in BPF

- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling

- Introduce bpf map element count and enable it for all program types

- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy

- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress

- Add uprobe support for the bpf_get_func_ip helper

- Check skb ownership against full socket

- Support for up to 12 arguments in BPF trampoline

- Extend link_info for kprobe_multi and perf_event links

Netfilter:

- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending

- Allow NLA_POLICY_MASK to be used with BE16/BE32 types

Driver API:

- Page pool optimizations, to improve data locality and cache usage

- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers

- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info

- Extend and use the yaml devlink specs to [re]generate the split ops

- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes

- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool

- Remove phylink legacy mode support

- Support offload LED blinking to phy

- Add devlink port function attributes for IPsec

New hardware / drivers:

- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy

- WiFi:
- MediaTek mt7981 support

- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips

- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925

Drivers:

- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution

- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support

- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support

- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs

- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support

- Connector:
- support for event filtering"

* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...

show more ...

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo V

Merge drm/drm-next into drm-intel-next

Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/1

Merge drm/drm-next into drm-intel-gt-next

Need to pull in b3e4aae612ec ("drm/i915/hdcp: Modify hdcp_gsc_message msg sending mechanism") as
a dependency for https://patchwork.freedesktop.org/series/121735/

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge tag 'linux-can-next-for-6.6-20230803' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2023-08-03

This

Merge tag 'linux-can-next-for-6.6-20230803' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2023-08-03

This is a pull request of 9 patches for net-next/master.

The 1st patch is by Ruan Jinjie, targets the flexcan driver, and
cleans up the error handling of platform_get_irq() in the
flexcan_probe() function.

Markus Schneider-Pargmann contributes 6 patches for the tcan4x5x M_CAN
driver, consisting of some cleanups, and adding support for the
tcan4552/4553 chips.

Another patch by Ruan Jinjie, that cleans up the error path of
platform_get_irq() in the c_can_plat_probe() function of the C_CAN
platform driver.

The last patch is by Frank Jungclaus and adds support for the
CAN-USB/3 and CAN FD to the ESD USB CAN driver.
================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge patch series "can: tcan4x5x: Introduce tcan4552/4553"

Markus Schneider-Pargmann <msp@baylibre.com> says:

This series introduces two new chips tcan-4552 and tcan-4553. The
generic driver works

Merge patch series "can: tcan4x5x: Introduce tcan4552/4553"

Markus Schneider-Pargmann <msp@baylibre.com> says:

This series introduces two new chips tcan-4552 and tcan-4553. The
generic driver works in general but needs a few small changes. These
are caused by the removal of wake and state pins.

Changes in v4:
- Use printk("... %pe\n", ERR_PTR(ret)) for new printks
- Link to v3: https://lore.kernel.org/lkml/20230721135009.1120562-1-msp@baylibre.com

Changes in v3:
- Rebased to v6.5-rc1
- Removed devicetree compatible check in tcan driver. The device version
is now unconditionally detected using the ID2 register
- Link to v2: https://lore.kernel.org/lkml/20230621093103.3134655-1-msp@baylibre.com

Changes in v2:
- Update the binding documentation to specify tcan4552 and tcan4553 with
the tcan4x5x as fallback
- Update the driver to use auto detection as well. If compatible differs
from the ID2 register, use the ID2 register and print a warning.
- Small style changes
- Link to v1: https://lore.kernel.org/lkml/20230314151201.2317134-1-msp@baylibre.com

Link: https://lore.kernel.org/all/20230728141923.162477-1-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

can: tcan4x5x: Check size of mram configuration

To reduce debugging effort in case the mram is misconfigured, add this
size check of the DT configuration. Currently if the mram configuration
doesn't

can: tcan4x5x: Check size of mram configuration

To reduce debugging effort in case the mram is misconfigured, add this
size check of the DT configuration. Currently if the mram configuration
doesn't fit into the available MRAM it just overwrites other areas of
the MRAM.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/all/20230728141923.162477-4-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

Merge tag 'linux-can-next-for-6.6-20230728' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

linux-can-next-for-6.6-20230728

Marc Kleine-Budde says:

====================
Hello n

Merge tag 'linux-can-next-for-6.6-20230728' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

linux-can-next-for-6.6-20230728

Marc Kleine-Budde says:

====================
Hello netdev-team,

this is a pull request of 21 patches for net-next/master.

The 1st patch is by Gerhard Uttenthaler, which adds Gerhard as the
maintainer ems_pci driver.

Peter Seiderer's patch removes a unused function from the peak_usb
driver.

The next 4 patches are by John Watts and add support for the sun4i_can
driver on the Allwinner D1.

Rob Herring's patch corrects the DT includes in various CAN drivers.

Followed by 14 patches from me concerning the gs_usb driver. The first
11 are various cleanups consisting of coding style improvements, error
path printout cleanups, and removal of unneeded
usb_kill_anchored_urbs(). The last 3 convert the driver to use NAPI to
avoid out-of-order reception of CAN frames.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge patch series "can: gs_usb: convert to NAPI"

Marc Kleine-Budde <mkl@pengutronix.de> says:

Traditionally USB drivers used netif_rx to pass the received CAN
frames/skbs to the network stack. In

Merge patch series "can: gs_usb: convert to NAPI"

Marc Kleine-Budde <mkl@pengutronix.de> says:

Traditionally USB drivers used netif_rx to pass the received CAN
frames/skbs to the network stack. In netif_rx() the skbs are queued to
the local CPU. If IRQs are handled in round robin, CAN frames may be
delivered out-of-order to user space.

To support devices without timestamping the TX path of the rx-offload
helper is cleaned up and extended:
- rename rx_offload_get_echo_skb() ->
can_rx_offload_get_echo_skb_queue_timestamp()
- add can_rx_offload_get_echo_skb_queue_tail()

The last patch converts the gs_usb driver to NAPI with the rx-offload
helper.

Link: https://lore.kernel.org/all/20230718-gs_usb-rx-offload-v2-0-716e542d14d5@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

can: rx-offload: rename rx_offload_get_echo_skb() -> can_rx_offload_get_echo_skb_queue_timestamp()

Rename the rx_offload_get_echo_skb() function to
can_rx_offload_get_echo_skb_queue_timestamp(), sin

can: rx-offload: rename rx_offload_get_echo_skb() -> can_rx_offload_get_echo_skb_queue_timestamp()

Rename the rx_offload_get_echo_skb() function to
can_rx_offload_get_echo_skb_queue_timestamp(), since it inserts the
echo skb into the rx-offload queue sorted by timestamp.

This is a preparation for adding
can_rx_offload_get_echo_skb_queue_tail(), which adds the echo skb to
the end of the queue. This is intended for devices that do not support
timestamps.

Link: https://lore.kernel.org/all/20230718-gs_usb-rx-offload-v2-1-716e542d14d5@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

can: Explicitly include correct DT includes, part 2

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of

can: Explicitly include correct DT includes, part 2

The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/all/20230724211841.805053-1-robh@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

show more ...

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.5-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'linux-can-next-for-6.6-20230719' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2023-07-19

The f

Merge tag 'linux-can-next-for-6.6-20230719' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2023-07-19

The first 2 patches are by Judith Mendez, target the m_can driver and
add hrtimer based polling support for TI AM62x SoCs, where the
interrupt of the MCU domain's m_can cores is not routed to the Cortex
A53 core.

A patch by Rob Herring converts the grcan driver to use the correct DT
include files.

Michal Simek and Srinivas Neeli add support for optional reset control
to the xilinx_can driver.

The next 2 patches are by Jimmy Assarsson and add support for new
Kvaser pciefd to the kvaser_pciefd driver.

Mao Zhu's patch for the ucan driver removes a repeated word from a
comment.

* tag 'linux-can-next-for-6.6-20230719' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: ucan: Remove repeated word
can: kvaser_pciefd: Add support for new Kvaser pciefd devices
can: kvaser_pciefd: Move hardware specific constants and functions into a driver_data struct
can: Explicitly include correct DT includes
can: xilinx_can: Add support for controller reset
dt-bindings: can: xilinx_can: Add reset description
can: m_can: Add hrtimer to generate software interrupt
dt-bindings: net: can: Remove interrupt properties for MCAN
====================

Link: https://lore.kernel.org/r/20230719072348.525039-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...