/openbmc/u-boot/drivers/tpm/ |
H A D | tpm_atmel_twi.c | 95 while ((res = i2c_read(0x29, 0, 0, recvbuf, 10))) in tpm_atmel_twi_xfer() 119 res = i2c_read(0x29, 0, 0, recvbuf, *recv_len); in tpm_atmel_twi_xfer()
|
/openbmc/u-boot/board/esd/vme8349/ |
H A D | pci.c | 62 if ((i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, ®8, 1) == 0) || in pci_init_board() 63 (i2c_read(0x38 , 0, 0, ®8, 1) == 0)) { in pci_init_board()
|
/openbmc/u-boot/board/freescale/common/ |
H A D | vsc3316_3308.c | 48 ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1); in vsc3316_config() 110 ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1); in vsc3308_config_adjust() 212 ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1); in vsc3308_config()
|
H A D | idt8t49n222a_serdes_clk.c | 16 ret = i2c_read(idt_addr, 0x17, 1, &val, 1); in check_pll_status() 43 ret = i2c_read(idt_addr, DEVICE_ID_REG, 1, &dev_id, 1); in set_serdes_refclk()
|
H A D | dcu_sii9022a.c | 74 i2c_read(CONFIG_SYS_I2C_DVI_ADDR, TPI_PWR_STAT_REG, 1, &temp, 1); in dcu_set_dvi_encoder() 85 i2c_read(CONFIG_SYS_I2C_DVI_ADDR, TPI_RW_ACCESS_REG, 1, &temp, 1); in dcu_set_dvi_encoder()
|
/openbmc/u-boot/drivers/power/pmic/ |
H A D | pmic_tps65217.c | 22 return i2c_read(TPS65217_CHIP_PM, src_reg, 1, src_val, 1); in tps65217_reg_read() 56 ret = i2c_read(TPS65217_CHIP_PM, dest_reg, 1, &read_val, 1); in tps65217_reg_write()
|
H A D | pmic_tps65218.c | 19 ret = i2c_read(TPS65218_CHIP_PM, dest_reg, 1, &read_val, 1); in tps65218_reg_read() 55 ret = i2c_read(TPS65218_CHIP_PM, dest_reg, 1, &read_val, 1); in tps65218_reg_write()
|
/openbmc/u-boot/board/lego/ev3/ |
H A D | legoev3.c | 81 if (i2c_read(EEPROM_I2C_ADDR, EEPROM_REV_OFFSET, 2, buf, 2)) { in get_board_rev() 113 if (i2c_read(EEPROM_I2C_ADDR, offset, 2, buf, 6)) { in get_board_serial()
|
/openbmc/u-boot/board/ti/beagle/ |
H A D | beagle.c | 224 i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config, in get_expansion_id() 231 i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 2, (u8 *)&expansion_config, in get_expansion_id() 283 i2c_read(TWL4030_CHIP_GPIO, GPIODATADIR1, 1, &val, 1); in beagle_dvi_pup() 287 i2c_read(TWL4030_CHIP_GPIO, GPIODATAOUT1, 1, &val, 1); in beagle_dvi_pup()
|
/openbmc/u-boot/board/varisys/common/ |
H A D | sys_eeprom.c | 149 ret = i2c_read(eeprom_addr, 0, eeprom_addr_len, in read_eeprom() 154 i2c_read(0x5f, 0x80, 1, uid, 16); in read_eeprom() 221 ret = i2c_read(eeprom_addr, 0, in prog_eeprom() 389 ret = i2c_read(chip, address, 1, mac, 6); in mac_read_from_generic_eeprom()
|
/openbmc/u-boot/board/Arcturus/ucp1020/ |
H A D | ucp1020.c | 199 if (i2c_read(CONFIG_SYS_I2C_IDT6V49205B, 7, 1, &id1[0], 2) < 0) { in last_stage_init() 203 i2c_read(CONFIG_SYS_I2C_IDT6V49205B, 4, 1, &id1[0], 2); in last_stage_init() 211 if (i2c_read(CONFIG_SYS_I2C_NCT72_ADDR, 0xFE, 1, &id2, 1) < 0) in last_stage_init()
|
/openbmc/u-boot/include/ |
H A D | i2c.h | 286 int i2c_read(uint8_t chip_addr, unsigned int addr, int alen, uint8_t *buffer, 760 int i2c_read(uint8_t chip, unsigned int addr, int alen, 813 int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len); 827 i2c_read(addr, reg, 1, &buf, 1); in i2c_reg_read()
|
/openbmc/linux/drivers/media/usb/gspca/ |
H A D | zc3xx.c | 5773 | (i2c_read(gspca_dev, 0x26) << 1) in getexposure() 5776 return i2c_read(gspca_dev, 0x10); in getexposure() 6068 retword = i2c_read(gspca_dev, 0x01); in vga_2wr_probe() 6074 retword = i2c_read(gspca_dev, 0x01); in vga_2wr_probe() 6081 retword = i2c_read(gspca_dev, 0x11); in vga_2wr_probe() 6091 retword = i2c_read(gspca_dev, 0x15); in vga_2wr_probe() 6097 retword = i2c_read(gspca_dev, 0x07); in vga_2wr_probe() 6100 retword = i2c_read(gspca_dev, 0x03); in vga_2wr_probe() 6103 retword = i2c_read(gspca_dev, 0x04); in vga_2wr_probe() 6109 retword = i2c_read(gspca_dev, 0x01); in vga_2wr_probe() [all …]
|
/openbmc/u-boot/drivers/power/mfd/ |
H A D | fg_max77693.c | 21 ret = i2c_read(MAX77693_FUEL_I2C_ADDR, MAX77693_VCELL, 1, in max77693_get_vcell() 37 ret = i2c_read(MAX77693_FUEL_I2C_ADDR, MAX77693_VFSOC, 1, in max77693_get_soc()
|
/openbmc/u-boot/drivers/misc/ |
H A D | pca9551_led.c | 55 ret = i2c_read(CONFIG_PCA9551_I2C_ADDR, reg, 1, &buf, 1); in pca9551_led_get_state() 80 ret = i2c_read(CONFIG_PCA9551_I2C_ADDR, reg, 1, &buf, 1); in pca9551_led_set_state()
|
H A D | mc9sdz60.c | 23 if (i2c_read(CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR, reg, 1, &val, 1)) { in mc9sdz60_reg_read()
|
/openbmc/u-boot/board/ge/bx50v3/ |
H A D | bx50v3.c | 736 i2c_read(DA9063_I2C_ADDR, DA9063_REG_BCORE2_CFG, 1, &val, 1); in pmic_init() 741 i2c_read(DA9063_I2C_ADDR, DA9063_REG_BCORE1_CFG, 1, &val, 1); in pmic_init() 746 i2c_read(DA9063_I2C_ADDR, DA9063_REG_BPRO_CFG, 1, &val, 1); in pmic_init() 751 i2c_read(DA9063_I2C_ADDR, DA9063_REG_BIO_CFG, 1, &val, 1); in pmic_init() 756 i2c_read(DA9063_I2C_ADDR, DA9063_REG_BMEM_CFG, 1, &val, 1); in pmic_init() 761 i2c_read(DA9063_I2C_ADDR, DA9063_REG_BPERI_CFG, 1, &val, 1); in pmic_init()
|
/openbmc/u-boot/board/siemens/draco/ |
H A D | board.c | 135 if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x80, 2, in draco_read_nand_geometry() 165 if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_ADDR_DDR3, 2, in read_eeprom() 171 if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_ADDR_CHIP, 2, in read_eeprom()
|
/openbmc/u-boot/board/siemens/common/ |
H A D | factoryset.c | 154 if (i2c_read(i2c_addr, EEPROM_FATORYSET_OFFSET, 2, hdr, sizeof(hdr))) in factoryset_read_eeprom() 177 if (i2c_read(i2c_addr, (OFF_PG + i) * EEPR_PG_SZ, 2, in factoryset_read_eeprom() 182 if (i2c_read(i2c_addr, (OFF_PG + pages) * EEPR_PG_SZ, 2, in factoryset_read_eeprom()
|
/openbmc/u-boot/drivers/rtc/ |
H A D | rx8025.c | 84 if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 16)) in rtc_get() 170 if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 16)) in rtc_reset()
|
H A D | rs5c372.c | 66 ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, len); in rs5c372_readram() 207 ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 0, buf, 1); in rtc_set()
|
/openbmc/u-boot/board/keymile/km_arm/ |
H A D | km_arm.c | 134 if (i2c_read(BOCO, REG_IRQ_CIRQ2, 1, &buf, 1) != 0) in startup_allowed() 158 if (i2c_read(BOCO, REG_CTRL_H, 1, &buf, 1) != 0) { in ethernet_present() 177 if (i2c_read(BOCO, REG_CTRL_H, 1, &buf, 1) != 0) { in initialize_unit_leds()
|
/openbmc/u-boot/board/xes/xpedite520x/ |
H A D | ddr.c | 14 i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t)); in get_spd()
|
/openbmc/u-boot/drivers/bootcount/ |
H A D | bootcount_i2c.c | 31 ret = i2c_read(CONFIG_SYS_I2C_RTC_ADDR, CONFIG_SYS_BOOTCOUNT_ADDR, in bootcount_load()
|
/openbmc/linux/drivers/gpu/drm/msm/dp/ |
H A D | dp_aux.c | 171 bool i2c_read = input_msg->request & in dp_aux_update_offset_and_segment() local 175 if (aux->native || i2c_read || ((input_msg->address != edid_address) && in dp_aux_update_offset_and_segment() 208 bool i2c_read = input_msg->request & in dp_aux_transfer_helper() local 211 if (!i2c_mot || !i2c_read || (input_msg->size == 0)) in dp_aux_transfer_helper()
|