Searched refs:can2 (Results 1 – 25 of 97) sorted by relevance
1234
14 * pins SD3_DAT0 and SD3_DAT1 are muxed as can2 Tx and Rx. The signals for can219 &can2 {72 * Due to the use of can2 the signals for can2 Tx and Rx are routed to108 * Due to the use of can2 the micro SD card on module have to be110 * can2 Tx and Rx.
18 * Note: can2 and fec2 are enabled on mba6ulx level (for i.MX6ULG2 usage)21 &can2 {
15 can1 = &can2;143 reg_can2_stby: regulator-can2-stby {147 regulator-name = "can2-3v3";201 &can2 {
13 /delete-node/ &can2;
21 &can2 {
23 &can2 {
27 &can2 {
82 reg_can2_supply: regulator-can2-supply {98 &can2 {
89 * pins SD3_DAT0 and SD3_DAT1 are muxed as can2 Tx and Rx. The signals for can290 * Tx and Rx are routed to the DHCOM UART1 rts/cts pins. So to enable can2 on94 &can2 {
82 &can2 {
58 &can2 {
64 &can2 {
76 &can2 {
61 &can2 {
75 &can2 {
226 &can2 {
57 &can2 {
73 &can2 {
234 &can2 {
339 can2_pins_a: can2-0 {349 can2_pins_b: can2-1 {