/openbmc/u-boot/drivers/video/bridge/ |
H A D | Kconfig | 7 requires LVDS, an eDP->LVDS bridge chip can be used to provide the 11 bool "Support Parade PS862X DP->LVDS bridge" 14 The Parade PS8622 and PS8625 are DisplayPort-to-LVDS (Low voltage 15 differential signalling) converters. They enable an LVDS LCD panel 17 LVDS capability, or where LVDS requires too many signals to route 21 bool "Support NXP PTN3460 DP->LVDS bridge" 24 The NXP PTN3460 is a DisplayPort-to-LVDS (Low voltage differential 25 signalling) converter. It enables an LVDS LCD panel to be connected 26 to an eDP output device such as an SoC that lacks LVDS capability, 27 or where LVDS requires too many signals to route on the PCB.
|
/openbmc/linux/Documentation/devicetree/bindings/display/imx/ |
H A D | ldb.txt | 1 Device-Tree bindings for LVDS Display Bridge (ldb) 3 LVDS Display Bridge 6 The LVDS Display Bridge device tree node contains up to two lvds-channel 7 nodes describing each of the two LVDS encoder channels of the bridge. 15 interfaces as input for each LVDS channel. 17 The phandle points to the iomuxc-gpr region containing the LVDS 23 "di0_pll" - LDB LVDS channel 0 mux 24 "di1_pll" - LDB LVDS channel 1 mux 25 "di0" - LDB LVDS channel 0 gate 26 "di1" - LDB LVDS channel 1 gate [all …]
|
/openbmc/linux/drivers/gpu/drm/bridge/ |
H A D | Kconfig | 74 Support for i.MX8MP DPI-to-LVDS on-SoC encoder. 108 tristate "Lontium LT9211 DSI/LVDS/DPI bridge" 115 Driver for Lontium LT9211 Single/Dual-Link DSI/LVDS or Single DPI 116 input to Single-link/Dual-Link DSI/LVDS or Single DPI output bridge 157 tristate "Transparent LVDS encoders and decoders support" 162 Support for transparent LVDS encoders and decoders that don't 172 GE B850v3 that convert dual channel LVDS 194 tristate "NXP PTN3460 DP/LVDS bridge" 199 NXP PTN3460 eDP-LVDS bridge chip driver. 202 tristate "Parade eDP/LVDS bridge" [all …]
|
/openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx7d-colibri-iris-v2.dts | 31 * This switches the LVDS transceiver to VESA color mapping mode. 43 * This switches the LVDS transceiver to the 24-bit RGB mode. 53 * This switches the LVDS transceiver to the single-channel 63 /* This turns the LVDS transceiver on */
|
H A D | imx6ull-colibri-wifi-iris-v2.dts | 31 /* This turns the LVDS transceiver on */ 42 * This switches the LVDS transceiver to the single-channel 53 * This switches the LVDS transceiver to the 24-bit RGB mode. 65 * This switches the LVDS transceiver to VESA color mapping mode.
|
H A D | imx7s-colibri-iris-v2.dts | 31 * This switches the LVDS transceiver to VESA color mapping mode. 43 * This switches the LVDS transceiver to the 24-bit RGB mode. 53 * This switches the LVDS transceiver to the single-channel 63 /* This turns the LVDS transceiver on */
|
H A D | imx6ull-colibri-iris-v2.dts | 31 /* This turns the LVDS transceiver on */ 42 * This switches the LVDS transceiver to the single-channel 53 * This switches the LVDS transceiver to the 24-bit RGB mode. 65 * This switches the LVDS transceiver to VESA color mapping mode.
|
/openbmc/linux/drivers/gpu/drm/bridge/imx/ |
H A D | Kconfig | 7 tristate "Freescale i.MX8QM LVDS display bridge" 13 Choose this to enable the internal LVDS Display Bridge(LDB) found in 17 tristate "Freescale i.MX8QXP LVDS display bridge" 23 Choose this to enable the internal LVDS Display Bridge(LDB) found in
|
/openbmc/linux/arch/arm64/boot/dts/renesas/ |
H A D | r8a774c0-ek874-idk-2121wr.dts | 4 * connected to an Advantech IDK-2121WR 21.5" LVDS panel 68 * When GP0_17 is low LVDS[01] are connected to the LVDS connector 69 * When GP0_17 is high LVDS[01] are connected to the LT8918L
|
H A D | hihope-rzg2-ex-lvds.dtsi | 3 * Device Tree Source for the RZ/G2[MN] HiHope sub board LVDS common parts 20 * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
|
H A D | r8a774e1-hihope-rzg2h-ex-idk-1110wr.dts | 4 * to an Advantech IDK-1110WR 10.1" LVDS panel
|
H A D | r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts | 4 * Advantech IDK-1110WR 10.1" LVDS panel
|
H A D | r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts | 4 * to an Advantech IDK-1110WR 10.1" LVDS panel
|
/openbmc/linux/drivers/gpu/drm/rockchip/ |
H A D | Kconfig | 83 bool "Rockchip LVDS support" 87 Choose this option to enable support for Rockchip LVDS controllers. 88 Rockchip rk3288 SoC has LVDS TX Controller can be used, and it 89 support LVDS, rgb, dual LVDS output mode. say Y to enable its
|
/openbmc/u-boot/arch/arm/mach-rockchip/rk3368/ |
H A D | Kconfig | 21 - MIPI-DSI/single-channel LVDS (muxed on the 'LVDS-A' pin-group) 39 with integrated CVBS (TP2825) / MIPI DSI / CSI / LVDS
|
/openbmc/linux/arch/arm/boot/dts/nvidia/ |
H A D | tegra30-asus-lvds-display.dtsi | 3 /* This dtsi file describes parts common for Asus T30 devices with a LVDS panel. */ 35 /* Texas Instruments SN75LVDS83B LVDS Transmitter */
|
/openbmc/u-boot/drivers/video/rockchip/ |
H A D | Kconfig | 17 (LVDS), embedded DisplayPort (eDP) and Display Serial Interface (DSI). 49 bool "LVDS Port" 52 This enables Low-voltage Differential Signaling(LVDS) display
|
/openbmc/linux/drivers/gpu/drm/imx/ipuv3/ |
H A D | Kconfig | 28 tristate "Support for LVDS displays" 33 Choose this to enable the internal LVDS Display Bridge (LDB)
|
/openbmc/u-boot/doc/device-tree-bindings/video/ |
H A D | rockchip-lvds.txt | 1 Rockchip LVDS interface 17 serialized LVDS signal.
|
/openbmc/linux/drivers/phy/freescale/ |
H A D | Kconfig | 12 tristate "Mixel LVDS PHY support" 17 Enable this to add support for the Mixel LVDS PHY as found
|
/openbmc/u-boot/board/boundary/nitrogen6x/ |
H A D | README | 52 Hannstar-XGA - 1024 x 768 LVDS (Freescale part number MCIMX-LVDS1) 53 wsvga-lvds - 1024 x 600 LVDS (Boundary p/n Nit6X_1024x600) 58 or the I2C touch controller of the LVDS and RGB displays in the priority
|
/openbmc/linux/Documentation/devicetree/bindings/display/bridge/ |
H A D | megachips-stdpxxxx-ge-b850v3-fw.txt | 2 STDP4028-ge-b850v3-fw bridges (LVDS-DP) 7 Host -> LVDS|--(STDP4028)--|DP -> DP|--(STDP2690)--|DP++ -> Video output
|
/openbmc/linux/drivers/gpu/drm/renesas/rcar-du/ |
H A D | Kconfig | 34 bool "R-Car DU LVDS Encoder Support" 39 Enable support for the R-Car Display Unit embedded LVDS encoders.
|
/openbmc/linux/Documentation/devicetree/bindings/clock/ |
H A D | silabs,si5341.txt | 87 1 = differential (defaults to LVDS levels) 123 silabs,format = <1>; /* LVDS 3v3 */ 131 * LVDS 1v8 135 silabs,format = <1>; /* LVDS 1v8 */
|
/openbmc/linux/drivers/gpu/drm/gma500/ |
H A D | psb_intel_display.c | 230 u32 lvds = REG_READ(LVDS); in psb_intel_crtc_mode_set() 250 REG_WRITE(LVDS, lvds); in psb_intel_crtc_mode_set() 251 REG_READ(LVDS); in psb_intel_crtc_mode_set() 322 is_lvds = (pipe == 1) && (REG_READ(LVDS) & LVDS_PORT_EN); in psb_intel_crtc_clock_get()
|