Searched refs:SD (Results 301 – 325 of 556) sorted by relevance
1...<<11121314151617181920>>...23
38 There are also additional properties for SD/LDOs. These additional properties112 SD: 13.75mV/us, 27.5mV/us, 55mV/us
80 with the SD specification.
32 mmc1 = &sdhc_2; /* SD card */344 * mmc1: error -5 whilst initialising SD card
20 mmc1 = &sdhc_2; /* SD card */
17 mmc1 = &sdhc_2; /* SD card */
348 /* External Micro SD slot */487 /* Used for voltage for external MMC/SD card */488 regulator-name = "V-MMC-SD";757 /* GPIO that enables the 2.9V SD card level translator */
227 // External Micro SD slot371 /* Used for voltage for external MMC/SD card */591 /* GPIO that enables the 2.9V SD card level translator */
247 /* Settings for all MMC/SD/SDIO default and sleep states */249 /* This is the external SD card slot, 4 bits wide */
177 /* SD card */
143 /* SD card */
198 /* SD card */
128 /* SD card */
182 /* EMMC2 is used to drive the SD card */
102 /* SD/MMC */
175 /* SD/MMC */
162 /* External micro SD card */
138 SD-Card 1 1 1139 SD-Card 1 0 1
74 * [56-62] SD
96 and then write the image to SD with:
45 OF device-tree gpio specification for SD pin(active high shutdown input)
152 /* SD */
76 PCI SD Card Host Controller Interface (SDHCI)
11 requires. Should your device require multiple partitions on an SD card,143 beaglebone-yocto Create SD card image for Beaglebone153 sdimage-bootpart Create SD card image with a boot partition164 Creates a partitioned SD card image for Beaglebone.286 beaglebone-yocto Create SD card image for Beaglebone296 sdimage-bootpart Create SD card image with a boot partition725 to flash your wic image onto an SD card or USB stick and test your
283 * [55] Micro SD card detect284 * [56-61] Micro SD
303 bool "eMMC or SD Card"305 Say Y here if the PPA firmware locate at eMMC/SD card.319 Length (in bytes) of PPA ESBC header to be copied from MMC/SD or