|
Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3 |
|
| #
906c4d5c |
| 25-Jul-2019 |
Gregory CLEMENT <gregory.clement@bootlin.com> |
dt-bindings: regulator: twl6030: Add retain-on-reset property
During reset the VMMC regulator doesn't reach 0V and only drops to
1.8V, furthermore the pulse width is under 200us whereas the SD
speci
dt-bindings: regulator: twl6030: Add retain-on-reset property
During reset the VMMC regulator doesn't reach 0V and only drops to
1.8V, furthermore the pulse width is under 200us whereas the SD
specification expect 1ms.
For this 2 reasons being able to no reset at all the VMMC during warm
reset and keep the current voltage is a good workaround. The TWL6030
allows this but needs to be aware of it and this configuration should
also be shared with the bootloader.
This is the purpose of this new property: ti,retain-on-reset
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20190725094542.16547-2-gregory.clement@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7 |
|
| #
a221f95e |
| 05-Apr-2016 |
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> |
regulator: twl: Provide of_map_mode for twl4030
of_map_mode is needed so to be possible to set initial regulators mode from
the board DTS. Otherwise, for DT boot, regulators are left in their defaul
regulator: twl: Provide of_map_mode for twl4030
of_map_mode is needed so to be possible to set initial regulators mode from
the board DTS. Otherwise, for DT boot, regulators are left in their default
state after reset/reboot. Document device specific modes as well.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7 |
|
| #
89ce43fb |
| 19-Jun-2013 |
Graeme Gregory <gg@slimlogic.co.uk> |
mfd: twl-core: Change TWL6025 references to TWL6032
The TWL6025 was never released beyond sample form and was replaced by
the PhoenixLite range of chips - TWL6032. Change the references to
reference
mfd: twl-core: Change TWL6025 references to TWL6032
The TWL6025 was never released beyond sample form and was replaced by
the PhoenixLite range of chips - TWL6032. Change the references to
reference the TWL6032 class and name the registers to twl6032 in line with
an actual released chip name to avoid confusion.
Currently there are no users of TWL6025 in the code.
Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Oleksandr Kozaruk <oleksandr.kozaruk@ti.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviwed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
show more ...
|
|
Revision tags: v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2 |
|
| #
0e8e5c34 |
| 04-Jun-2012 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
regulator: twl: Remove references to 32kHz clock from DT bindings
Due to the lack of a generic clock API we'd had the 32kHz clock in the
regulator driver but this is definitely a Linux-specific thin
regulator: twl: Remove references to 32kHz clock from DT bindings
Due to the lack of a generic clock API we'd had the 32kHz clock in the
regulator driver but this is definitely a Linux-specific thing and now
we have a clock API hopefully the code can be moved elsewhere. Try to
avoid getting DTs deployed relying on the 32kHz clock by removing it
from the bindings, grep seems to tell me it's not currently used anyway.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|
|
Revision tags: v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6 |
|
| #
e9d47fa4 |
| 28-Feb-2012 |
Peter Ujfalusi <peter.ujfalusi@ti.com> |
regulator: twl-regulator: Add fixed LDO for V1V8, V2V1 supply
V1V8 supply most common use is to provide VIO for the system.
V2V1 supply is used on SDP4430/PandaBoards to provide 2.1V to
twl6040, and
regulator: twl-regulator: Add fixed LDO for V1V8, V2V1 supply
V1V8 supply most common use is to provide VIO for the system.
V2V1 supply is used on SDP4430/PandaBoards to provide 2.1V to
twl6040, and also as an input to VCXIO_IN, VDAC_IN of twl6030.
Also update the bindings documentation with the new compatible
property for these additional LDOs.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|
| #
2098e95c |
| 28-Feb-2012 |
Rajendra Nayak <rnayak@ti.com> |
regulator: twl: adapt twl-regulator driver to dt
Modify the twl regulator driver to extract the regulator_init_data from
device tree when passed, instead of getting it through platform_data
structur
regulator: twl: adapt twl-regulator driver to dt
Modify the twl regulator driver to extract the regulator_init_data from
device tree when passed, instead of getting it through platform_data
structures (on non-DT builds)
Also add documentation for TWL regulator specific bindings.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|
|
Revision tags: v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3 |
|
| #
906c4d5c |
| 25-Jul-2019 |
Gregory CLEMENT <gregory.clement@bootlin.com> |
dt-bindings: regulator: twl6030: Add retain-on-reset property
During reset the VMMC regulator doesn't reach 0V and only drops to
1.8V, furthermore the pulse width is under 200us whereas
dt-bindings: regulator: twl6030: Add retain-on-reset property
During reset the VMMC regulator doesn't reach 0V and only drops to
1.8V, furthermore the pulse width is under 200us whereas the SD
specification expect 1ms.
For this 2 reasons being able to no reset at all the VMMC during warm
reset and keep the current voltage is a good workaround. The TWL6030
allows this but needs to be aware of it and this configuration should
also be shared with the bootloader.
This is the purpose of this new property: ti,retain-on-reset
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Link: https://lore.kernel.org/r/20190725094542.16547-2-gregory.clement@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7 |
|
| #
a221f95e |
| 05-Apr-2016 |
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> |
regulator: twl: Provide of_map_mode for twl4030
of_map_mode is needed so to be possible to set initial regulators mode from
the board DTS. Otherwise, for DT boot, regulators are left in
regulator: twl: Provide of_map_mode for twl4030
of_map_mode is needed so to be possible to set initial regulators mode from
the board DTS. Otherwise, for DT boot, regulators are left in their default
state after reset/reboot. Document device specific modes as well.
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
|
Revision tags: openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7, v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4, v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7 |
|
| #
89ce43fb |
| 19-Jun-2013 |
Graeme Gregory <gg@slimlogic.co.uk> |
mfd: twl-core: Change TWL6025 references to TWL6032
The TWL6025 was never released beyond sample form and was replaced by
the PhoenixLite range of chips - TWL6032. Change the references
mfd: twl-core: Change TWL6025 references to TWL6032
The TWL6025 was never released beyond sample form and was replaced by
the PhoenixLite range of chips - TWL6032. Change the references to
reference the TWL6032 class and name the registers to twl6032 in line with
an actual released chip name to avoid confusion.
Currently there are no users of TWL6025 in the code.
Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Oleksandr Kozaruk <oleksandr.kozaruk@ti.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviwed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
show more ...
|
|
Revision tags: v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2, v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3, v3.5-rc2 |
|
| #
0e8e5c34 |
| 04-Jun-2012 |
Mark Brown <broonie@opensource.wolfsonmicro.com> |
regulator: twl: Remove references to 32kHz clock from DT bindings
Due to the lack of a generic clock API we'd had the 32kHz clock in the
regulator driver but this is definitely a Linux-s
regulator: twl: Remove references to 32kHz clock from DT bindings
Due to the lack of a generic clock API we'd had the 32kHz clock in the
regulator driver but this is definitely a Linux-specific thing and now
we have a clock API hopefully the code can be moved elsewhere. Try to
avoid getting DTs deployed relying on the 32kHz clock by removing it
from the bindings, grep seems to tell me it's not currently used anyway.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|
|
Revision tags: v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6 |
|
| #
e9d47fa4 |
| 28-Feb-2012 |
Peter Ujfalusi <peter.ujfalusi@ti.com> |
regulator: twl-regulator: Add fixed LDO for V1V8, V2V1 supply
V1V8 supply most common use is to provide VIO for the system.
V2V1 supply is used on SDP4430/PandaBoards to provide 2.1V to
regulator: twl-regulator: Add fixed LDO for V1V8, V2V1 supply
V1V8 supply most common use is to provide VIO for the system.
V2V1 supply is used on SDP4430/PandaBoards to provide 2.1V to
twl6040, and also as an input to VCXIO_IN, VDAC_IN of twl6030.
Also update the bindings documentation with the new compatible
property for these additional LDOs.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|
| #
2098e95c |
| 28-Feb-2012 |
Rajendra Nayak <rnayak@ti.com> |
regulator: twl: adapt twl-regulator driver to dt
Modify the twl regulator driver to extract the regulator_init_data from
device tree when passed, instead of getting it through platform_d
regulator: twl: adapt twl-regulator driver to dt
Modify the twl regulator driver to extract the regulator_init_data from
device tree when passed, instead of getting it through platform_data
structures (on non-DT builds)
Also add documentation for TWL regulator specific bindings.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|