/openbmc/openbmc/poky/meta-yocto-bsp/ |
H A D | README.hardware.md | 141 SD card for booting, for example. 153 accelerated graphics, audio, serial, JTAG, and SD/MMC. The Black adds a faster 163 so its boot behavior matches that of the White and boots off of SD card. To do 178 2. Use the "dd" utility to write the image to the SD card. For example: 182 3. Insert the SD card into the Beaglebone and boot the board.
|
/openbmc/openbmc/poky/ |
H A D | README.hardware.md | 141 SD card for booting, for example. 153 accelerated graphics, audio, serial, JTAG, and SD/MMC. The Black adds a faster 163 so its boot behavior matches that of the White and boots off of SD card. To do 178 2. Use the "dd" utility to write the image to the SD card. For example: 182 3. Insert the SD card into the Beaglebone and boot the board.
|
/openbmc/u-boot/board/toradex/colibri_vf/ |
H A D | imximage.cfg | 15 /* Boot Offset 0x400, valid for both SD and NAND boot */
|
/openbmc/openbmc/poky/meta/recipes-core/base-files/base-files/ |
H A D | fstab | 9 # uncomment this if your device has a SD/MMC/Transflash slot
|
/openbmc/qemu/docs/system/arm/ |
H A D | gumstix.rst | 15 * MMC/SD card
|
H A D | sx1.rst | 16 - Secure Digital card connected to OMAP MMC/SD host
|
H A D | palm.rst | 21 - Secure Digital card connected to OMAP MMC/SD host
|
/openbmc/u-boot/board/phytec/pcm052/ |
H A D | imximage.cfg | 15 /* Boot Offset 0x400, valid for both SD and NAND boot */
|
/openbmc/u-boot/board/freescale/vf610twr/ |
H A D | imximage.cfg | 15 /* Boot Offset 0x400, valid for both SD and NAND boot */
|
/openbmc/u-boot/board/cavium/thunderx/ |
H A D | Kconfig | 23 Enable vendor specific ATF query commands such as SPI and SD/MMC
|
/openbmc/openbmc/meta-arm/meta-arm-bsp/documentation/ |
H A D | template.md | 19 *For example, an overview of the N1SDP SD structure, or FVP arguments*
|
/openbmc/u-boot/board/freescale/ls1046ardb/ |
H A D | README | 33 - SDHC: connects directly to a full SD/MMC slot 75 b) SD boot
|
/openbmc/openbmc/meta-openembedded/meta-oe/recipes-support/sdmon/ |
H A D | sdmon_git.bb | 1 SUMMARY = "Get SD card health data"
|
/openbmc/u-boot/arch/arm/mach-aspeed/ast2400/ |
H A D | Kconfig | 16 4 Serial ports, 4 USB ports, VGA port, PCIe, SD card slot,
|
/openbmc/u-boot/arch/arm/mach-aspeed/ast2500/ |
H A D | Kconfig | 16 4 Serial ports, 4 USB ports, VGA port, PCIe, SD card slot,
|
/openbmc/u-boot/board/imgtec/ci20/ |
H A D | README | 3 Installation to an SD card:
|
/openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx6dl-dhcom-picoitx.dts | 6 * DHCM-iMX6DL-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
|
H A D | imx6q-dhcom-pdk2.dts | 7 * DHCM-iMX6Q-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
|
/openbmc/u-boot/doc/ |
H A D | README.mpc85xx | 32 RAMBOOT(SD, SPI & NAND boot) 34 RAMBOOT Secure (SD, SPI & NAND) 45 A) defined(CONFIG_SYS_RAMBOOT) i.e. SD, SPI, NAND RAMBOOT & NAND_SPL boot
|
H A D | README.chromium | 72 4. Prepare an SD card 74 DISK=/dev/sdc # Replace with your actual SD card device 81 5. Write U-Boot to the SD card 92 Reboot the device with the SD card inserted. Press Clrl-U at the developer 184 Reboot the device with the SD card inserted. Press Clrl-U at the developer
|
/openbmc/linux/Documentation/devicetree/bindings/mmc/ |
H A D | vt8500-sdmmc.txt | 1 * Wondermedia WM8505/WM8650 SD/MMC Host Controller
|
/openbmc/qemu/docs/system/riscv/ |
H A D | sifive_u.rst | 26 * 1 SD card in SPI mode 109 and SSBL are both on the SD card. 227 SD card image that is properly partitioned and populated with correct contents. 230 A sample configuration file for a 128 MiB SD card image is: 288 Boot U-Boot from SD card, by specifying msel=11 and pass the SD card image 315 case: ZSBL (in QEMU) loads U-Boot SPL from SD card or SPI flash to L2LIM, 320 without the needs of preparing the SPI flash or SD card images, an alternate
|
/openbmc/u-boot/arch/arm/mach-tegra/tegra186/ |
H A D | Kconfig | 15 combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB
|
/openbmc/openbmc/poky/meta/recipes-devtools/mmc/ |
H A D | mmc-utils_git.bb | 1 SUMMARY = "Userspace tools for MMC/SD devices"
|
/openbmc/u-boot/board/freescale/lx2160a/ |
H A D | README | 31 eSDHC1: Supports a SD connector for connecting SD cards 53 b) SD boot 70 Image SD card Offset
|