/openbmc/linux/arch/arm/boot/dts/allwinner/ |
H A D | sun8i-h2-plus-orangepi-zero.dts | 204 * power up the board; when it's used as OTG port, this VBUS is
|
H A D | sun8i-h3-beelink-x2.dts | 234 /* USB VBUS is always on except for the OTG port */
|
H A D | sun5i-gr8-chip-pro.dts | 222 * If one wants to use it as a true OTG port, it should be
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | sun5i-gr8-chip-pro.dts | 244 * If one wants to use it as a true OTG port, it should be
|
H A D | meson-gxbb-odroidc2.dts | 192 "USB HUB nRESET", "USB OTG Power En",
|
/openbmc/u-boot/board/technexion/pico-imx6ul/ |
H A D | README | 30 Connect a USB cable between the OTG pico port and the host PC.
|
/openbmc/linux/Documentation/devicetree/bindings/power/supply/ |
H A D | qcom,pm8941-charger.yaml | 134 Specifically whether to supply voltage to VBUS for host mode operation of the OTG port,
|
/openbmc/qemu/docs/system/arm/ |
H A D | bananapi_m2u.rst | 7 2.0 ports, 1 USB OTG port, 1 HDMI port, 1 audio jack, a DC power port,
|
/openbmc/linux/arch/arm64/boot/dts/freescale/ |
H A D | imx8mq-pico-pi.dts | 297 MX8MQ_IOMUXC_NAND_DQS_GPIO3_IO14 0x19 /* USB OTG VBUS Enable */
|
H A D | imx8-ss-conn.dtsi | 160 reg = <0x5b120000 0x10000>, /* memory area for OTG/DRD registers */
|
H A D | imx8mm-nitrogen-r2.dts | 365 /* USB OTG port */
|
/openbmc/u-boot/board/freescale/m5373evb/ |
H A D | README | 272 USB-MCF537x: (OTG module) EHCI device is registered 273 USB-MCF537x: (OTG module) UDC device is registered
|
/openbmc/u-boot/board/freescale/t1040qds/ |
H A D | README | 82 — Second port can be converted to OTG mini-AB
|
/openbmc/u-boot/board/synopsys/iot_devkit/ |
H A D | README | 50 * USB OTG connector
|
/openbmc/u-boot/drivers/power/ |
H A D | Kconfig | 87 powers some of the pingroups, NAND/eMMC, SD/MMC, and USB OTG. 139 On A80 boards dcdc4 powers VDD-SYS, HDMI, USB OTG and should be 0.9V.
|
/openbmc/u-boot/arch/arm/mach-rockchip/rk3288/ |
H A D | Kconfig | 93 1 micro USB OTG port, HDMI, VGA, micro-SD card, audio, WiFi, Gigabit
|
/openbmc/u-boot/board/freescale/ls2080aqds/ |
H A D | README | 38 - Second USB 3.0 port configured as OTG with micro-AB connector
|
/openbmc/linux/arch/arm64/boot/dts/amlogic/ |
H A D | meson-gxbb-odroidc2.dts | 280 "USB HUB nRESET", "USB OTG Power En",
|
/openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx6q-marsboard.dts | 389 MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 /* USB OTG POWER ENABLE */
|
H A D | mba6ulx.dtsi | 357 /* we implement only dual role but not a fully featured OTG */
|
/openbmc/u-boot/board/freescale/lx2160a/ |
H A D | README | 43 Host with Type-A connector, second USB 3.0 port configured as OTG
|
/openbmc/linux/arch/arm64/boot/dts/rockchip/ |
H A D | rk3566-lubancat-1.dts | 530 /* USB OTG/USB Host_1 USB 2.0 Comb */
|
H A D | rk3566-anbernic-rgxx3.dtsi | 734 * (and not a host or OTG port).
|
/openbmc/u-boot/doc/driver-model/ |
H A D | usb-info.txt | 63 in USB device mode (OTG operation). It can be omitted if that is not 94 as a work-around for controllers which can act as USB devices in OTG
|
/openbmc/linux/drivers/usb/gadget/legacy/ |
H A D | Kconfig | 70 identifiers of the USB-OTG test device. That means that when 71 this gadget connects to another OTG device, with this one using
|