/openbmc/linux/Documentation/devicetree/bindings/media/ |
H A D | nxp,imx-mipi-csi2.yaml | 7 title: NXP i.MX7 and i.MX8 MIPI CSI-2 receiver 14 The NXP i.MX7 and i.MX8 families contain SoCs that include a MIPI CSI-2 19 While the CSI-2 receiver is separate from the MIPI D-PHY IP core, the PHY is 45 - description: The MIPI D-PHY clock 60 description: The MIPI D-PHY digital power supply 64 - description: MIPI D-PHY slave reset
|
H A D | renesas,rzg2l-csi2.yaml | 8 title: Renesas RZ/G2L (and alike SoC's) MIPI CSI-2 receiver 14 The CSI-2 receiver device provides MIPI CSI-2 capabilities for the Renesas RZ/G2L 15 (and alike SoCs). MIPI CSI-2 is part of the CRU block which is used in conjunction 34 - description: Internal clock for connecting CRU and MIPI
|
H A D | video-interfaces.yaml | 90 - 1 # MIPI CSI-2 C-PHY 91 - 2 # MIPI CSI1 93 - 4 # MIPI CSI-2 D-PHY 169 lane, e.g. for 2-lane MIPI CSI-2 bus we could have "data-lanes = <1 2>;", 173 lane. This property is valid for serial busses only (e.g. MIPI CSI-2). 182 a MIPI CSI-2 bus we could have "clock-lanes = <0>;", which places the 184 only (e.g. MIPI CSI-2). 189 Allow MIPI CSI-2 non-continuous clock mode. 194 Allowed data bus frequencies. For MIPI CSI-2, for instance, this is the
|
H A D | allwinner,sun8i-a83t-mipi-csi2.yaml | 7 title: Allwinner A83T MIPI CSI-2 26 - description: MIPI-specific Clock 45 description: Input port, connect to a MIPI CSI-2 sensor
|
H A D | allwinner,sun6i-a31-mipi-csi2.yaml | 7 title: Allwinner A31 MIPI CSI-2 38 description: MIPI D-PHY 53 description: Input port, connect to a MIPI CSI-2 sensor
|
/openbmc/linux/Documentation/devicetree/bindings/soundwire/ |
H A D | qcom,soundwire.yaml | 82 More info in MIPI Alliance SoundWire 1.0 Specifications. 93 More info in MIPI Alliance SoundWire 1.0 Specifications. 104 More info in MIPI Alliance SoundWire 1.0 Specifications. 115 More info in MIPI Alliance SoundWire 1.0 Specifications. 126 More info in MIPI Alliance SoundWire 1.0 Specifications. 137 More info in MIPI Alliance SoundWire 1.0 Specifications. 150 More info in MIPI Alliance SoundWire 1.0 Specifications. 167 More info in MIPI Alliance SoundWire 1.0 Specifications. 184 More info in MIPI Alliance SoundWire 1.0 Specifications. 200 More info in MIPI Alliance SoundWire 1.0 Specifications.
|
/openbmc/linux/drivers/gpu/drm/renesas/rcar-du/ |
H A D | Kconfig | 50 bool "R-Car DU MIPI DSI Encoder Support" 55 Enable support for the R-Car Display Unit embedded MIPI DSI encoders. 64 tristate "RZ/G2L MIPI DSI Encoder Support" 69 Enable support for the RZ/G2L Display Unit embedded MIPI DSI encoders.
|
/openbmc/linux/Documentation/admin-guide/media/ |
H A D | imx7.rst | 16 - MIPI CSI-2 Receiver 20 MIPI Camera Input ---> MIPI CSI-2 --- > |\ 39 This is the MIPI CSI-2 receiver entity. It has one sink pad to receive the pixel 40 data from MIPI CSI-2 camera sensor. It has one source pad, corresponding to the 48 sensor with a parallel interface or from MIPI CSI-2 virtual channel 0. It has 55 can interface directly with Parallel and MIPI CSI-2 buses. It has 256 x 64 FIFO 76 On this platform an OV2680 MIPI CSI-2 module is connected to the internal MIPI
|
H A D | platform-cardlist.rst | 24 cdns-csi2rx Cadence MIPI-CSI2 RX Controller 25 cdns-csi2tx Cadence MIPI-CSI2 TX Controller 45 rcar-csi2 R-Car MIPI CSI-2 Receiver 54 s5p-csis S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS)
|
H A D | imx.rst | 32 camera sensors over Parallel, BT.656/1120, and MIPI CSI-2 buses. 66 - MIPI CSI-2 Receiver for camera sensors with the MIPI CSI-2 bus 84 - Supports parallel, BT.565, and MIPI CSI-2 interfaces. 115 MIPI CSI-2 OV5640 sensor, requires the i.MX6 MIPI CSI-2 receiver. But 141 the MIPI CSI-2 stream (usually from a MIPI CSI-2 camera sensor). It has 167 MIPI CSI-2 virtual channels from imx6-mipi-csi2 entity. They have a 413 camera interface, and the OV5640 module with a MIPI CSI-2 425 The MIPI CSI-2 OV5640 module is connected to the i.MX internal MIPI CSI-2 579 i.MX6Q SabreSD with MIPI CSI-2 OV5640 583 interface OV5642 module on IPU1 CSI0, and a MIPI CSI-2 OV5640 [all …]
|
/openbmc/linux/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/ |
H A D | Kconfig | 3 tristate "Allwinner A83T MIPI CSI-2 Controller and D-PHY Driver" 14 Support for the Allwinner A83T MIPI CSI-2 controller and D-PHY.
|
/openbmc/linux/drivers/media/platform/sunxi/sun6i-mipi-csi2/ |
H A D | Kconfig | 3 tristate "Allwinner A31 MIPI CSI-2 Controller Driver" 14 Support for the Allwinner A31 MIPI CSI-2 controller, also found on
|
/openbmc/linux/Documentation/devicetree/bindings/phy/ |
H A D | allwinner,sun6i-a31-mipi-dphy.yaml | 7 title: Allwinner A31 MIPI D-PHY Controller 51 - "rx" for receiving (e.g. when used with MIPI CSI-2); 52 - "tx" for transmitting (e.g. when used with MIPI DSI).
|
H A D | mixel,mipi-dsi-phy.yaml | 13 The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the 14 MIPI-DSI IP from Northwest Logic). It represents the physical layer for the 18 in either MIPI-DSI PHY mode or LVDS PHY mode.
|
/openbmc/linux/Documentation/devicetree/bindings/display/bridge/ |
H A D | lontium,lt8912b.yaml | 7 title: Lontium LT8912B MIPI to HDMI Bridge 35 Primary MIPI port for MIPI input
|
H A D | ti,sn65dsi83.yaml | 13 Texas Instruments SN65DSI83 1x Single-link MIPI DSI 16 Texas Instruments SN65DSI84 1x Single-link MIPI DSI 45 description: Video port for MIPI DSI Channel-A input 65 description: Video port for MIPI DSI Channel-B input
|
/openbmc/linux/drivers/media/platform/samsung/exynos4-is/ |
H A D | Kconfig | 36 tristate "S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver" 41 This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2 42 receiver (MIPI-CSIS) devices.
|
/openbmc/u-boot/arch/arm/mach-rockchip/rk3399/ |
H A D | Kconfig | 28 * HDMI, eDP, MIPI-DSI, MIPI-DSI/CSI and MIPI-CSI 41 * HDMI/DP/MIPI
|
/openbmc/linux/drivers/gpu/drm/stm/ |
H A D | Kconfig | 18 tristate "STMicroelectronics specific extensions for Synopsys MIPI DSI" 22 Choose this option for MIPI DSI support on STMicroelectronics SoC.
|
/openbmc/linux/Documentation/userspace-api/media/drivers/ |
H A D | ccs.rst | 5 MIPI CCS camera sensor driver 8 The MIPI CCS camera sensor driver is a generic driver for `MIPI CCS 62 The MIPI CCS driver implements a number of private controls under 63 ``V4L2_CID_USER_BASE_CCS`` to control the MIPI CCS compliant camera sensors.
|
/openbmc/linux/Documentation/devicetree/bindings/display/samsung/ |
H A D | samsung,exynos5433-mic.yaml | 16 MIC (Mobile Image Compressor) resides between DECON and MIPI DSI. MIPI DSI is 19 transferred through MIPI DSI. The compressed frame data must be uncompressed
|
/openbmc/linux/Documentation/ABI/testing/ |
H A D | configfs-stp-policy-p_sys-t | 8 tagged with this UUID in the MIPI SyS-T packet stream, to 17 Include payload length in the MIPI SyS-T header, boolean. 28 MIPI SyS-T packet metadata, if this many milliseconds have
|
/openbmc/linux/drivers/i3c/master/ |
H A D | Kconfig | 17 Support for Synopsys DesignWare MIPI I3C Controller. 48 tristate "MIPI I3C Host Controller Interface driver (EXPERIMENTAL)" 52 Support for hardware following the MIPI Aliance's I3C Host Controller
|
/openbmc/linux/Documentation/devicetree/bindings/display/ |
H A D | intel,keembay-msscam.yaml | 15 MIPI DSI clocks. It also configures the interconnect between LCD and 16 MIPI DSI.
|
/openbmc/linux/drivers/gpu/drm/panel/ |
H A D | Kconfig | 67 24 bit RGB per pixel. It provides a MIPI DSI interface to 144 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 154 4-lane 800x1280 MIPI DSI panel. 157 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 163 Feiyang FY07024DI26A30-D MIPI-DSI interface. 166 tristate "HIMAX HX8394 MIPI-DSI LCD panels" 173 720x1440 TFT LCD panel that uses a MIPI-DSI interface. 223 24 bit RGB per pixel. It provides a MIPI DSI interface to 264 24 bit RGB per pixel. It provides a MIPI DSI interface to 422 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" [all …]
|