| /openbmc/linux/drivers/gpu/drm/i915/gvt/ |
| H A D | cfg_space.c | ba25d977 Thu Jul 09 02:09:56 CDT 2020 Colin Xu <colin.xu@intel.com> drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.
When system enters S3 state, device enters D3 state while RAM remains
powered. From vGPU/GVT perspective, ppgtt_mm is residual in guest memory
during vGPU in D3 state, so that when guest state transits from S3->S0,
ppgtt_mm can be re-used and no need rebuild.
Previous implementation invalidate and destroy ppgtt_mm at DMLR,
regardless the power state transition is S0->S3->S0 (guest suspend or
resume) or OFF->S0 (normal boot/reboot), invalidate and destroy ppgtt_mm
is unnecessary in the former transition case.
The patch saves the vGPU D3/D0 transition state when guest writes the
PCI_PM_CTRL in vGPU's configure space, then in later DMLR, GVT can decide
whether or not invalidate and destroy ppgtt_mm is required. The
d3_entered flags is reset after DMLR.
To test this feature, make sure S3 is enabled in QEMU parameters:
i440fx: PIIX4_PM.disable_s3=0
q35: ICH9-LPC.disable_s3=0
Also need enable sleep option in guest OS if it's disabled.
v2:
- Revise commit message to more accurate description. (Kevin)
- Split patch by logic. (Zhenyu)
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200709071002.247960-2-colin.xu@intel.com
ba25d977 Thu Jul 09 02:09:56 CDT 2020 Colin Xu <colin.xu@intel.com> drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.
When system enters S3 state, device enters D3 state while RAM remains
powered. From vGPU/GVT perspective, ppgtt_mm is residual in guest memory
during vGPU in D3 state, so that when guest state transits from S3->S0,
ppgtt_mm can be re-used and no need rebuild.
Previous implementation invalidate and destroy ppgtt_mm at DMLR,
regardless the power state transition is S0->S3->S0 (guest suspend or
resume) or OFF->S0 (normal boot/reboot), invalidate and destroy ppgtt_mm
is unnecessary in the former transition case.
The patch saves the vGPU D3/D0 transition state when guest writes the
PCI_PM_CTRL in vGPU's configure space, then in later DMLR, GVT can decide
whether or not invalidate and destroy ppgtt_mm is required. The
d3_entered flags is reset after DMLR.
To test this feature, make sure S3 is enabled in QEMU parameters:
i440fx: PIIX4_PM.disable_s3=0
q35: ICH9-LPC.disable_s3=0
Also need enable sleep option in guest OS if it's disabled.
v2:
- Revise commit message to more accurate description. (Kevin)
- Split patch by logic. (Zhenyu)
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200709071002.247960-2-colin.xu@intel.com
|
| H A D | gtt.h | ba25d977 Thu Jul 09 02:09:56 CDT 2020 Colin Xu <colin.xu@intel.com> drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.
When system enters S3 state, device enters D3 state while RAM remains
powered. From vGPU/GVT perspective, ppgtt_mm is residual in guest memory
during vGPU in D3 state, so that when guest state transits from S3->S0,
ppgtt_mm can be re-used and no need rebuild.
Previous implementation invalidate and destroy ppgtt_mm at DMLR,
regardless the power state transition is S0->S3->S0 (guest suspend or
resume) or OFF->S0 (normal boot/reboot), invalidate and destroy ppgtt_mm
is unnecessary in the former transition case.
The patch saves the vGPU D3/D0 transition state when guest writes the
PCI_PM_CTRL in vGPU's configure space, then in later DMLR, GVT can decide
whether or not invalidate and destroy ppgtt_mm is required. The
d3_entered flags is reset after DMLR.
To test this feature, make sure S3 is enabled in QEMU parameters:
i440fx: PIIX4_PM.disable_s3=0
q35: ICH9-LPC.disable_s3=0
Also need enable sleep option in guest OS if it's disabled.
v2:
- Revise commit message to more accurate description. (Kevin)
- Split patch by logic. (Zhenyu)
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200709071002.247960-2-colin.xu@intel.com
ba25d977 Thu Jul 09 02:09:56 CDT 2020 Colin Xu <colin.xu@intel.com> drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.
When system enters S3 state, device enters D3 state while RAM remains
powered. From vGPU/GVT perspective, ppgtt_mm is residual in guest memory
during vGPU in D3 state, so that when guest state transits from S3->S0,
ppgtt_mm can be re-used and no need rebuild.
Previous implementation invalidate and destroy ppgtt_mm at DMLR,
regardless the power state transition is S0->S3->S0 (guest suspend or
resume) or OFF->S0 (normal boot/reboot), invalidate and destroy ppgtt_mm
is unnecessary in the former transition case.
The patch saves the vGPU D3/D0 transition state when guest writes the
PCI_PM_CTRL in vGPU's configure space, then in later DMLR, GVT can decide
whether or not invalidate and destroy ppgtt_mm is required. The
d3_entered flags is reset after DMLR.
To test this feature, make sure S3 is enabled in QEMU parameters:
i440fx: PIIX4_PM.disable_s3=0
q35: ICH9-LPC.disable_s3=0
Also need enable sleep option in guest OS if it's disabled.
v2:
- Revise commit message to more accurate description. (Kevin)
- Split patch by logic. (Zhenyu)
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200709071002.247960-2-colin.xu@intel.com
|
| H A D | vgpu.c | ba25d977 Thu Jul 09 02:09:56 CDT 2020 Colin Xu <colin.xu@intel.com> drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.
When system enters S3 state, device enters D3 state while RAM remains
powered. From vGPU/GVT perspective, ppgtt_mm is residual in guest memory
during vGPU in D3 state, so that when guest state transits from S3->S0,
ppgtt_mm can be re-used and no need rebuild.
Previous implementation invalidate and destroy ppgtt_mm at DMLR,
regardless the power state transition is S0->S3->S0 (guest suspend or
resume) or OFF->S0 (normal boot/reboot), invalidate and destroy ppgtt_mm
is unnecessary in the former transition case.
The patch saves the vGPU D3/D0 transition state when guest writes the
PCI_PM_CTRL in vGPU's configure space, then in later DMLR, GVT can decide
whether or not invalidate and destroy ppgtt_mm is required. The
d3_entered flags is reset after DMLR.
To test this feature, make sure S3 is enabled in QEMU parameters:
i440fx: PIIX4_PM.disable_s3=0
q35: ICH9-LPC.disable_s3=0
Also need enable sleep option in guest OS if it's disabled.
v2:
- Revise commit message to more accurate description. (Kevin)
- Split patch by logic. (Zhenyu)
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200709071002.247960-2-colin.xu@intel.com
ba25d977 Thu Jul 09 02:09:56 CDT 2020 Colin Xu <colin.xu@intel.com> drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.
When system enters S3 state, device enters D3 state while RAM remains
powered. From vGPU/GVT perspective, ppgtt_mm is residual in guest memory
during vGPU in D3 state, so that when guest state transits from S3->S0,
ppgtt_mm can be re-used and no need rebuild.
Previous implementation invalidate and destroy ppgtt_mm at DMLR,
regardless the power state transition is S0->S3->S0 (guest suspend or
resume) or OFF->S0 (normal boot/reboot), invalidate and destroy ppgtt_mm
is unnecessary in the former transition case.
The patch saves the vGPU D3/D0 transition state when guest writes the
PCI_PM_CTRL in vGPU's configure space, then in later DMLR, GVT can decide
whether or not invalidate and destroy ppgtt_mm is required. The
d3_entered flags is reset after DMLR.
To test this feature, make sure S3 is enabled in QEMU parameters:
i440fx: PIIX4_PM.disable_s3=0
q35: ICH9-LPC.disable_s3=0
Also need enable sleep option in guest OS if it's disabled.
v2:
- Revise commit message to more accurate description. (Kevin)
- Split patch by logic. (Zhenyu)
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200709071002.247960-2-colin.xu@intel.com
|
| H A D | gtt.c | ba25d977 Thu Jul 09 02:09:56 CDT 2020 Colin Xu <colin.xu@intel.com> drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.
When system enters S3 state, device enters D3 state while RAM remains
powered. From vGPU/GVT perspective, ppgtt_mm is residual in guest memory
during vGPU in D3 state, so that when guest state transits from S3->S0,
ppgtt_mm can be re-used and no need rebuild.
Previous implementation invalidate and destroy ppgtt_mm at DMLR,
regardless the power state transition is S0->S3->S0 (guest suspend or
resume) or OFF->S0 (normal boot/reboot), invalidate and destroy ppgtt_mm
is unnecessary in the former transition case.
The patch saves the vGPU D3/D0 transition state when guest writes the
PCI_PM_CTRL in vGPU's configure space, then in later DMLR, GVT can decide
whether or not invalidate and destroy ppgtt_mm is required. The
d3_entered flags is reset after DMLR.
To test this feature, make sure S3 is enabled in QEMU parameters:
i440fx: PIIX4_PM.disable_s3=0
q35: ICH9-LPC.disable_s3=0
Also need enable sleep option in guest OS if it's disabled.
v2:
- Revise commit message to more accurate description. (Kevin)
- Split patch by logic. (Zhenyu)
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200709071002.247960-2-colin.xu@intel.com
ba25d977 Thu Jul 09 02:09:56 CDT 2020 Colin Xu <colin.xu@intel.com> drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.
When system enters S3 state, device enters D3 state while RAM remains
powered. From vGPU/GVT perspective, ppgtt_mm is residual in guest memory
during vGPU in D3 state, so that when guest state transits from S3->S0,
ppgtt_mm can be re-used and no need rebuild.
Previous implementation invalidate and destroy ppgtt_mm at DMLR,
regardless the power state transition is S0->S3->S0 (guest suspend or
resume) or OFF->S0 (normal boot/reboot), invalidate and destroy ppgtt_mm
is unnecessary in the former transition case.
The patch saves the vGPU D3/D0 transition state when guest writes the
PCI_PM_CTRL in vGPU's configure space, then in later DMLR, GVT can decide
whether or not invalidate and destroy ppgtt_mm is required. The
d3_entered flags is reset after DMLR.
To test this feature, make sure S3 is enabled in QEMU parameters:
i440fx: PIIX4_PM.disable_s3=0
q35: ICH9-LPC.disable_s3=0
Also need enable sleep option in guest OS if it's disabled.
v2:
- Revise commit message to more accurate description. (Kevin)
- Split patch by logic. (Zhenyu)
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200709071002.247960-2-colin.xu@intel.com
|
| H A D | gvt.h | ba25d977 Thu Jul 09 02:09:56 CDT 2020 Colin Xu <colin.xu@intel.com> drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.
When system enters S3 state, device enters D3 state while RAM remains
powered. From vGPU/GVT perspective, ppgtt_mm is residual in guest memory
during vGPU in D3 state, so that when guest state transits from S3->S0,
ppgtt_mm can be re-used and no need rebuild.
Previous implementation invalidate and destroy ppgtt_mm at DMLR,
regardless the power state transition is S0->S3->S0 (guest suspend or
resume) or OFF->S0 (normal boot/reboot), invalidate and destroy ppgtt_mm
is unnecessary in the former transition case.
The patch saves the vGPU D3/D0 transition state when guest writes the
PCI_PM_CTRL in vGPU's configure space, then in later DMLR, GVT can decide
whether or not invalidate and destroy ppgtt_mm is required. The
d3_entered flags is reset after DMLR.
To test this feature, make sure S3 is enabled in QEMU parameters:
i440fx: PIIX4_PM.disable_s3=0
q35: ICH9-LPC.disable_s3=0
Also need enable sleep option in guest OS if it's disabled.
v2:
- Revise commit message to more accurate description. (Kevin)
- Split patch by logic. (Zhenyu)
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200709071002.247960-2-colin.xu@intel.com
ba25d977 Thu Jul 09 02:09:56 CDT 2020 Colin Xu <colin.xu@intel.com> drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.
When system enters S3 state, device enters D3 state while RAM remains
powered. From vGPU/GVT perspective, ppgtt_mm is residual in guest memory
during vGPU in D3 state, so that when guest state transits from S3->S0,
ppgtt_mm can be re-used and no need rebuild.
Previous implementation invalidate and destroy ppgtt_mm at DMLR,
regardless the power state transition is S0->S3->S0 (guest suspend or
resume) or OFF->S0 (normal boot/reboot), invalidate and destroy ppgtt_mm
is unnecessary in the former transition case.
The patch saves the vGPU D3/D0 transition state when guest writes the
PCI_PM_CTRL in vGPU's configure space, then in later DMLR, GVT can decide
whether or not invalidate and destroy ppgtt_mm is required. The
d3_entered flags is reset after DMLR.
To test this feature, make sure S3 is enabled in QEMU parameters:
i440fx: PIIX4_PM.disable_s3=0
q35: ICH9-LPC.disable_s3=0
Also need enable sleep option in guest OS if it's disabled.
v2:
- Revise commit message to more accurate description. (Kevin)
- Split patch by logic. (Zhenyu)
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200709071002.247960-2-colin.xu@intel.com
|