Home
last modified time | relevance | path

Searched +full:voltage +full:- +full:offset +full:- +full:microvolt (Results 1 – 25 of 79) sorted by relevance

1234

/openbmc/linux/Documentation/devicetree/bindings/regulator/
H A Dregulator.yaml1 # SPDX-License-Identifier: GPL-2.0
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Voltage/Current Regulators
10 - Liam Girdwood <lgirdwood@gmail.com>
11 - Mark Brown <broonie@kernel.org>
14 regulator-name:
18 regulator-min-microvolt:
19 description: smallest voltage consumers may set
21 regulator-max-microvolt:
[all …]
H A Danatop-regulator.yaml1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/regulator/anatop-regulator.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Freescale Anatop Voltage Regulators
10 - Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
13 - $ref: regulator.yaml#
17 const: fsl,anatop-regulator
19 regulator-name: true
21 anatop-reg-offset:
[all …]
H A Dpbias-regulator.txt1 PBIAS internal regulator for SD card dual voltage i/o pads on OMAP SoCs.
4 - compatible:
5 - should be "ti,pbias-dra7" for DRA7
6 - should be "ti,pbias-omap2" for OMAP2
7 - should be "ti,pbias-omap3" for OMAP3
8 - should be "ti,pbias-omap4" for OMAP4
9 - should be "ti,pbias-omap5" for OMAP5
10 - "ti,pbias-omap" is deprecated
11 - reg: pbias register offset from syscon base and size of pbias register.
12 - syscon : phandle of the system control module
[all …]
/openbmc/linux/Documentation/devicetree/bindings/mfd/
H A Dgateworks-gsc.yaml1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
14 - Watchdog Timer
15 - GPIO
16 - Pushbutton controller
17 - Hardware monitor with ADC's for temperature and voltage rails and
21 - Tim Harvey <tharvey@gateworks.com>
25 pattern: "gsc@[0-9a-f]{1,2}"
[all …]
/openbmc/u-boot/doc/device-tree-bindings/regulator/
H A Dst,stm32-vrefbuf.txt1 STM32 VREFBUF - Voltage reference buffer
3 Some STM32 devices embed a voltage reference buffer which can be used as
4 voltage reference for ADCs, DACs and also as voltage reference for external
8 - compatible: Must be "st,stm32-vrefbuf".
9 - reg: Offset and length of VREFBUF register set.
10 - clocks: Must contain an entry for peripheral clock.
13 - vdda-supply: Phandle to the parent vdda supply regulator node.
17 compatible = "st,stm32-vrefbuf";
20 regulator-min-microvolt = <1500000>;
21 regulator-max-microvolt = <2500000>;
[all …]
/openbmc/linux/Documentation/devicetree/bindings/iio/dac/
H A Dadi,ad3552r.yaml1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Nuno Sá <nuno.sa@analog.com>
16 https://www.analog.com/media/en/technical-documentation/data-sheets/ad3542r.pdf
17 https://www.analog.com/media/en/technical-documentation/data-sheets/ad3552r.pdf
22 - adi,ad3542r
23 - adi,ad3552r
28 spi-max-frequency:
31 reset-gpios:
[all …]
/openbmc/linux/arch/arm/boot/dts/nxp/mxs/
H A Dimx28-cfa10036.dts1 // SPDX-License-Identifier: GPL-2.0-or-later
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
11 model = "Crystalfontz CFA-10036 Board";
20 compatible = "gpio-leds";
21 pinctrl-names = "default";
22 pinctrl-0 = <&led_pins_cfa10036>;
26 default-state = "on";
30 reg_vddio_sd0: vddio-sd0 {
31 compatible = "regulator-fixed";
[all …]
/openbmc/u-boot/arch/arm/dts/
H A Dimx6sl.dtsi10 #include <dt-bindings/interrupt-controller/irq.h>
11 #include "imx6sl-pinfunc.h"
12 #include <dt-bindings/clock/imx6sl-clock.h>
15 #address-cells = <1>;
16 #size-cells = <1>;
19 * pre-existing /chosen node to be available to insert the
21 * Also for U-Boot there must be a pre-existing /memory node.
47 #address-cells = <1>;
48 #size-cells = <0>;
51 compatible = "arm,cortex-a9";
[all …]
H A Dexynos5250-spring.dts1 // SPDX-License-Identifier: GPL-2.0
9 /dts-v1/;
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/input/input.h>
48 samsung,bl1-offset = <0x1400>;
49 samsung,bl2-offset = <0x3400>;
50 u-boot-memory = "/memory";
51 u-boot-offset = <0x3e00000 0x100000>;
56 #address-cells = <1>;
[all …]
H A Dimx6sx.dtsi9 #include <dt-bindings/clock/imx6sx-clock.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/input.h>
12 #include <dt-bindings/interrupt-controller/arm-gic.h>
13 #include "imx6sx-pinfunc.h"
55 #address-cells = <1>;
56 #size-cells = <0>;
59 compatible = "arm,cortex-a9";
62 next-level-cache = <&L2>;
63 operating-points = <
[all …]
H A Dimx6qdl.dtsi1 // SPDX-License-Identifier: GPL-2.0+
6 #include <dt-bindings/clock/imx6qdl-clock.h>
7 #include <dt-bindings/interrupt-controller/arm-gic.h>
10 #address-cells = <1>;
11 #size-cells = <1>;
14 * pre-existing /chosen node to be available to insert the
16 * Also for U-Boot there must be a pre-existing /memory node.
55 compatible = "fsl,imx-ckil", "fixed-clock";
56 #clock-cells = <0>;
57 clock-frequency = <32768>;
[all …]
H A Dam335x-chilisom.dtsi2 * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/
10 #include <dt-bindings/interrupt-controller/irq.h>
14 compatible = "grinn,am335x-chilisom", "ti,am33xx";
18 cpu0-supply = <&dcdc2_reg>;
29 pinctrl-names = "default";
32 pinctrl-single,pins = <
39 pinctrl-single,pins = <
60 pinctrl-names = "default";
61 pinctrl-0 = <&i2c0_pins>;
64 clock-frequency = <400000>;
[all …]
H A Drk3399-puma.dtsi1 // SPDX-License-Identifier: GPL-2.0+ OR X11
6 #include <dt-bindings/pwm/pwm.h>
10 model = "Theobroma Systems RK3399-Q7 SoM";
11 compatible = "tsd,rk3399-q7", "tsd,puma", "rockchip,rk3399";
14 u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
15 u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */
16 u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
17 u-boot,boot-led = "module_led";
18 sysreset-gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
22 stdout-path = "serial0:115200n8";
[all …]
/openbmc/linux/arch/arm/boot/dts/nxp/imx/
H A Dimx6sl.dtsi1 // SPDX-License-Identifier: GPL-2.0
5 #include <dt-bindings/interrupt-controller/irq.h>
6 #include "imx6sl-pinfunc.h"
7 #include <dt-bindings/clock/imx6sl-clock.h>
10 #address-cells = <1>;
11 #size-cells = <1>;
14 * pre-existing /chosen node to be available to insert the
50 #address-cells = <1>;
51 #size-cells = <0>;
54 compatible = "arm,cortex-a9";
[all …]
H A Dimx6qdl.dtsi1 // SPDX-License-Identifier: GPL-2.0+
6 #include <dt-bindings/clock/imx6qdl-clock.h>
7 #include <dt-bindings/input/input.h>
8 #include <dt-bindings/interrupt-controller/arm-gic.h>
11 #address-cells = <1>;
12 #size-cells = <1>;
15 * pre-existing /chosen node to be available to insert the
58 compatible = "fixed-clock";
59 #clock-cells = <0>;
60 clock-frequency = <32768>;
[all …]
H A Dimx6qdl-gw5910.dtsi1 // SPDX-License-Identifier: GPL-2.0
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/interrupt-controller/irq.h>
19 stdout-path = &uart2;
27 gpio-keys {
28 compatible = "gpio-keys";
30 user-pb {
36 user-pb1x {
39 interrupt-parent = <&gsc>;
[all …]
H A Dimx6qdl-gw5913.dtsi1 // SPDX-License-Identifier: GPL-2.0
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/interrupt-controller/irq.h>
21 stdout-path = &uart2;
24 gpio-keys {
25 compatible = "gpio-keys";
27 user-pb {
33 user-pb1x {
36 interrupt-parent = <&gsc>;
[all …]
H A Dimx6sx.dtsi1 // SPDX-License-Identifier: GPL-2.0
5 #include <dt-bindings/clock/imx6sx-clock.h>
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/input.h>
8 #include <dt-bindings/interrupt-controller/arm-gic.h>
9 #include "imx6sx-pinfunc.h"
12 #address-cells = <1>;
13 #size-cells = <1>;
16 * pre-existing /chosen node to be available to insert the
60 #address-cells = <1>;
[all …]
/openbmc/u-boot/include/power/
H A Dregulator.h1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright (C) 2014-2015 Samsung Electronics
11 * U-Boot Voltage/Current Regulator
18 * The regulator uclass - is based on uclass platform data which is allocated,
19 * automatically for each regulator device on bind and 'dev->uclass_platdata'
21 * The uclass file: 'drivers/power/regulator/regulator-uclass.c'
23 * The regulator device - is based on driver's model 'struct udevice'.
25 * - devname - the regulator device's name: 'dev->name'
26 * - platname - the device's platdata's name. So in the code it looks like:
27 * 'uc_pdata = dev->uclass_platdata'; 'name = uc_pdata->name'.
[all …]
/openbmc/linux/arch/arm64/boot/dts/freescale/
H A Dimx8mn-venice-gw7902.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/linux-event-codes.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/net/ti-dp83867.h>
17 compatible = "gw,imx8mn-gw7902", "fsl,imx8mn";
24 stdout-path = &uart2;
33 compatible = "fixed-clock";
34 #clock-cells = <0>;
[all …]
H A Dimx8mm-venice-gw7904.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/linux-event-codes.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/phy/phy-imx8-pcie.h>
17 compatible = "gateworks,imx8mm-gw7904", "fsl,imx8mm";
20 stdout-path = &uart2;
28 gpio-keys {
29 compatible = "gpio-keys";
[all …]
H A Dimx8mm-venice-gw7903.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/linux-event-codes.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/phy/phy-imx8-pcie.h>
17 compatible = "gw,imx8mm-gw7903", "fsl,imx8mm";
25 stdout-path = &uart2;
33 gpio-keys {
34 compatible = "gpio-keys";
[all …]
H A Dimx8mm-venice-gw7902.dts1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/linux-event-codes.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/net/ti-dp83867.h>
12 #include <dt-bindings/phy/phy-imx8-pcie.h>
18 compatible = "gw,imx8mm-gw7902", "fsl,imx8mm";
27 stdout-path = &uart2;
36 compatible = "fixed-clock";
[all …]
/openbmc/linux/arch/arm/boot/dts/ti/omap/
H A Dam335x-chilisom.dtsi1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/
7 #include <dt-bindings/interrupt-controller/irq.h>
11 compatible = "grinn,am335x-chilisom", "ti,am33xx";
15 cpu0-supply = <&dcdc2_reg>;
26 pinctrl-names = "default";
28 i2c0_pins: i2c0-pins {
29 pinctrl-single,pins = <
35 nandflash_pins: nandflash-pins {
36 pinctrl-single,pins = <
[all …]
H A Dam335x-igep0033.dtsi1 // SPDX-License-Identifier: GPL-2.0-only
3 * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
5 * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
8 /dts-v1/;
11 #include <dt-bindings/interrupt-controller/irq.h>
16 cpu0-supply = <&vdd1_reg>;
26 pinctrl-names = "default";
27 pinctrl-0 = <&leds_pins>;
29 compatible = "gpio-leds";
34 default-state = "on";
[all …]

1234