| /openbmc/linux/drivers/phy/sunplus/ |
| H A D | phy-sunplus-usb2.c | 78 static int update_disc_vol(struct sp_usbphy *usbphy) in update_disc_vol() argument
86 cell = nvmem_cell_get(usbphy->dev, disc_name); in update_disc_vol()
98 set = (set >> usbphy->disc_vol_addr_off) & J_DISC; in update_disc_vol()
104 val = readl(usbphy->phy_regs + CONFIG7); in update_disc_vol()
106 writel(val, usbphy->phy_regs + CONFIG7); in update_disc_vol()
113 struct sp_usbphy *usbphy = phy_get_drvdata(phy); in sp_uphy_init() local
117 ret = clk_prepare_enable(usbphy->phy_clk); in sp_uphy_init()
121 ret = reset_control_deassert(usbphy->rstc); in sp_uphy_init()
126 writel(HIGH_MASK_BITS | 0x4002, usbphy->moon4_regs + UPHY_CONTROL0); in sp_uphy_init()
127 writel(HIGH_MASK_BITS | 0x8747, usbphy->moon4_regs + UPHY_CONTROL1); in sp_uphy_init()
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/phy/ |
| H A D | fsl,mxs-usbphy.yaml | 4 $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml#
16 - fsl,imx23-usbphy
17 - fsl,imx7ulp-usbphy
18 - fsl,vf610-usbphy
21 - fsl,imx28-usbphy
22 - fsl,imx6ul-usbphy
23 - fsl,imx6sl-usbphy
24 - fsl,imx6sx-usbphy
25 - fsl,imx6q-usbphy
26 - const: fsl,imx23-usbphy
[all …]
|
| H A D | ralink-usb-phy.txt | 4 - compatible: "ralink,rt3352-usbphy"
5 "mediatek,mt7620-usbphy"
6 "mediatek,mt7628-usbphy"
7 - reg: required for "mediatek,mt7628-usbphy", unused otherwise
15 usbphy: phy {
16 compatible = "mediatek,mt7628-usbphy";
|
| H A D | keystone-usb-phy.txt | 4 - compatible: should be "ti,keystone-usbphy".
15 compatible = "ti,keystone-usbphy";
|
| H A D | rockchip-usb-phy.yaml | 69 usbphy: usbphy {
|
| /openbmc/qemu/hw/usb/ |
| H A D | imx-usb-phy.c | 24 VMSTATE_UINT32_ARRAY(usbphy, IMXUSBPHYState, USBPHY_MAX),
31 s->usbphy[USBPHY_PWD] = 0x001e1c00; in imx_usbphy_softreset()
32 s->usbphy[USBPHY_TX] = 0x10060607; in imx_usbphy_softreset()
33 s->usbphy[USBPHY_RX] = 0x00000000; in imx_usbphy_softreset()
34 s->usbphy[USBPHY_CTRL] = 0xc0200000; in imx_usbphy_softreset()
41 s->usbphy[USBPHY_STATUS] = 0x00000000; in imx_usbphy_reset()
42 s->usbphy[USBPHY_DEBUG] = 0x7f180000; in imx_usbphy_reset()
43 s->usbphy[USBPHY_DEBUG0_STATUS] = 0x00000000; in imx_usbphy_reset()
44 s->usbphy[USBPHY_DEBUG1] = 0x00001000; in imx_usbphy_reset()
45 s->usbphy[USBPHY_VERSION] = 0x04020000; in imx_usbphy_reset()
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/reset/ |
| H A D | renesas,rzg2l-usbphy-ctrl.yaml | 4 $id: http://devicetree.org/schemas/reset/renesas,rzg2l-usbphy-ctrl.yaml#
7 title: Renesas RZ/{G2L,V2L} USBPHY Control
13 The RZ/G2L USBPHY Control mainly controls reset and power down of the
20 - renesas,r9a07g043-usbphy-ctrl # RZ/G2UL
21 - renesas,r9a07g044-usbphy-ctrl # RZ/G2{L,LC}
22 - renesas,r9a07g054-usbphy-ctrl # RZ/V2L
23 - const: renesas,rzg2l-usbphy-ctrl
59 phyrst: usbphy-ctrl@11c40000 {
60 compatible = "renesas,r9a07g044-usbphy-ctrl",
61 "renesas,rzg2l-usbphy-ctrl";
|
| /openbmc/linux/arch/arm64/boot/dts/freescale/ |
| H A D | imx8dxl-ss-conn.dtsi | 41 fsl,usbphy = <&usbphy2>;
69 usbphy2: usbphy@5b110000 {
70 compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy";
|
| /openbmc/u-boot/arch/arm/mach-imx/mx7ulp/ |
| H A D | scg.c | 709 struct usbphy_regs *usbphy = in scg_enable_usb_pll() local
723 if (!(readl(&usbphy->usb1_pll_480_ctrl) & PLL_USB_LOCK_MASK)) { in scg_enable_usb_pll()
724 writel(0x1c00000, &usbphy->usb1_pll_480_ctrl_clr); in scg_enable_usb_pll()
728 writel(0xc00000, &usbphy->usb1_pll_480_ctrl_set); in scg_enable_usb_pll()
732 writel(0x800000, &usbphy->usb1_pll_480_ctrl_set); in scg_enable_usb_pll()
736 writel(0x1400000, &usbphy->usb1_pll_480_ctrl_set); in scg_enable_usb_pll()
740 writel(0xc00000, &usbphy->usb1_pll_480_ctrl_set); in scg_enable_usb_pll()
746 &usbphy->usb1_pll_480_ctrl_set); in scg_enable_usb_pll()
752 writel(PLL_USB_PWR_MASK, &usbphy->usb1_pll_480_ctrl_set); in scg_enable_usb_pll()
756 if (readl(&usbphy->usb1_pll_480_ctrl) & in scg_enable_usb_pll()
[all …]
|
| /openbmc/linux/drivers/usb/phy/ |
| H A D | phy-keystone.c | 99 { .compatible = "ti,keystone-usbphy" },
108 .name = "keystone-usbphy",
115 MODULE_ALIAS("platform:keystone-usbphy");
|
| H A D | phy-mxs-usb.c | 188 { .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, },
189 { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
190 { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
191 { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
192 { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
193 { .compatible = "fsl,imx6ul-usbphy", .data = &imx6ul_phy_data, },
194 { .compatible = "fsl,imx7ulp-usbphy", .data = &imx7ulp_phy_data, },
772 ret = of_alias_get_id(np, "usbphy"); in mxs_phy_probe()
|
| /openbmc/linux/arch/arm64/boot/dts/allwinner/ |
| H A D | sun50i-h616.dtsi | 515 phys = <&usbphy 0>;
517 extcon = <&usbphy 0>;
521 usbphy: phy@5100400 { label
565 phys = <&usbphy 0>;
578 phys = <&usbphy 0>;
593 phys = <&usbphy 1>;
606 phys = <&usbphy 1>;
621 phys = <&usbphy 2>;
634 phys = <&usbphy 2>;
649 phys = <&usbphy 3>;
[all …]
|
| /openbmc/qemu/include/hw/usb/ |
| H A D | imx-usb-phy.h | 41 #define TYPE_IMX_USBPHY "imx.usbphy"
51 uint32_t usbphy[USBPHY_MAX]; member
|
| /openbmc/u-boot/arch/arc/dts/ |
| H A D | iot_devkit.dts | 37 phys = <&usbphy>;
41 usbphy: phy { label
|
| /openbmc/linux/Documentation/devicetree/bindings/usb/ |
| H A D | brcm,bcm7445-ehci.yaml | 36 const: usbphy
54 phy-names = "usbphy";
|
| H A D | allwinner,sun4i-a10-musb.yaml | 100 phys = <&usbphy 0>;
102 extcon = <&usbphy 0>;
|
| /openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
| H A D | imx27-pdk.dts | 17 usbphy {
22 usbphy0: usbphy@0 {
113 fsl,usbphy = <&usbphy0>;
|
| H A D | imx27-phytec-phycore-rdk.dts | 51 usbphy {
52 usbphy2: usbphy@2 {
297 fsl,usbphy = <&usbphy2>;
|
| /openbmc/linux/drivers/phy/ralink/ |
| H A D | phy-ralink-usb.c | 153 .compatible = "ralink,rt3352-usbphy",
158 .compatible = "mediatek,mt7620-usbphy",
163 .compatible = "mediatek,mt7628-usbphy",
195 if (of_device_is_compatible(dev->of_node, "mediatek,mt7628-usbphy")) { in ralink_usb_phy_probe()
|
| /openbmc/linux/drivers/reset/ |
| H A D | reset-rzg2l-usbphy-ctrl.c | 3 * Renesas RZ/G2L USBPHY control driver
92 { .compatible = "renesas,rzg2l-usbphy-ctrl" },
181 MODULE_DESCRIPTION("Renesas RZ/G2L USBPHY Control");
|
| /openbmc/linux/arch/arm/boot/dts/allwinner/ |
| H A D | sunxi-h3-h5.dtsi | 260 phys = <&usbphy 0>;
262 extcon = <&usbphy 0>;
267 usbphy: phy@1c19400 { label
305 phys = <&usbphy 0>;
317 phys = <&usbphy 0>;
328 phys = <&usbphy 1>;
340 phys = <&usbphy 1>;
351 phys = <&usbphy 2>;
363 phys = <&usbphy 2>;
374 phys = <&usbphy 3>;
[all …]
|
| /openbmc/u-boot/arch/arm/dts/ |
| H A D | imx6sll.dtsi | 534 usbphy1: usbphy@020c9000 {
535 compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
536 "fsl,imx23-usbphy";
544 usbphy2: usbphy@020ca000 {
545 compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy",
546 "fsl,imx23-usbphy";
698 fsl,usbphy = <&usbphy1>;
713 fsl,usbphy = <&usbphy2>;
|
| H A D | sunxi-h3-h5.dtsi | 249 phys = <&usbphy 0>;
251 extcon = <&usbphy 0>;
255 usbphy: phy@1c19400 { label
312 phys = <&usbphy 1>;
324 phys = <&usbphy 1>;
335 phys = <&usbphy 2>;
347 phys = <&usbphy 2>;
358 phys = <&usbphy 3>;
370 phys = <&usbphy 3>;
|
| H A D | sun50i-a64-pinebook.dts | 80 phys = <&usbphy 0>;
127 phys = <&usbphy 0>;
290 &usbphy {
|
| /openbmc/linux/drivers/usb/host/ |
| H A D | xhci-tegra.c | 297 struct usb_phy **usbphy; member
1407 return (tegra->usbphy[index] != NULL); in is_usb2_otg_phy()
1451 struct usb_phy *usbphy) in tegra_xusb_get_usb2_port() argument
1456 if (tegra->usbphy[i] && usbphy == tegra->usbphy[i]) in tegra_xusb_get_usb2_port()
1468 struct usb_phy *usbphy = (struct usb_phy *)data; in tegra_xhci_id_notify() local
1470 dev_dbg(tegra->dev, "%s(): action is %d", __func__, usbphy->last_event); in tegra_xhci_id_notify()
1472 if ((tegra->host_mode && usbphy->last_event == USB_EVENT_ID) || in tegra_xhci_id_notify()
1473 (!tegra->host_mode && usbphy->last_event != USB_EVENT_ID)) { in tegra_xhci_id_notify()
1479 tegra->otg_usb2_port = tegra_xusb_get_usb2_port(tegra, usbphy); in tegra_xhci_id_notify()
1481 tegra->host_mode = (usbphy->last_event == USB_EVENT_ID) ? true : false; in tegra_xhci_id_notify()
[all …]
|