/openbmc/linux/Documentation/devicetree/bindings/mfd/ |
H A D | samsung,s5m8767.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Krzysztof Kozlowski <krzk@kernel.org> 17 and current regulators, RTC, clock outputs and other sub-blocks. 21 const: samsung,s5m8767-pmic 39 s5m8767,pmic-buck2-dvs-voltage: 40 $ref: /schemas/types.yaml#/definitions/uint32-array 44 A set of 8 voltage values in micro-volt (uV) units for buck2 when 45 changing voltage using gpio dvs. [all …]
|
H A D | max8998.txt | 1 * Maxim MAX8998, National/TI LP3974 multi-function device 3 The Maxim MAX8998 is a multi-function device which includes voltage/current 5 other sub-blocks. It is interfaced using an I2C interface. Each sub-block 8 PMIC sub-block 9 -------------- 11 The PMIC sub-block contains a number of voltage and current regulators, 17 - compatible: Should be one of the following: 18 - "maxim,max8998" for Maxim MAX8998 19 - "national,lp3974" or "ti,lp3974" for National/TI LP3974. 20 - reg: Specifies the i2c slave address of the pmic block. It should be 0x66. [all …]
|
H A D | rockchip,rk808.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Chris Zhong <zyw@rock-chips.com> 11 - Zhang Qing <zhangqing@rock-chips.com> 20 - rockchip,rk808 28 '#clock-cells': 30 See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. 33 clock-output-names: 38 rockchip,system-power-controller: [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/regulator/ |
H A D | maxim,max8997.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Krzysztof Kozlowski <krzk@kernel.org> 15 motor driver, flash LED driver and Micro-USB Interface Controller. 22 const: maxim,max8997-pmic 24 charger-supply: 30 - description: irq1 interrupt 31 - description: alert interrupt 33 max8997,pmic-buck1-dvs-voltage: [all …]
|
H A D | maxim,max8952.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Krzysztof Kozlowski <krzk@kernel.org> 13 - $ref: regulator.yaml# 19 max8952,default-mode: 23 index of default DVS voltage 25 max8952,dvs-mode-microvolt: 32 Array of 4 integer values defining DVS voltages in microvolts. All values 35 max8952,en-gpio: [all …]
|
H A D | lp872x.txt | 4 - compatible: "ti,lp8720" or "ti,lp8725" 5 - reg: I2C slave address. 0x7d = LP8720, 0x7a = LP8725 8 - ti,general-config: the value of LP872X_GENERAL_CFG register (u8) 10 bit[2]: BUCK output voltage control by external DVS pin or register 12 bit[1]: sleep control by external DVS pin or register 20 bit[2]: BUCK1 output voltage control by external DVS pin or register 21 1 = register 08h, 0 = DVS 27 - ti,update-config: define it when LP872X_GENERAL_CFG register should be set 28 - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices. 29 - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2. [all …]
|
H A D | nxp,pca9450-regulator.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 4 $id: http://devicetree.org/schemas/regulator/nxp,pca9450-regulator.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Robin Gong <yibin.gong@nxp.com> 18 https://www.nxp.com/docs/en/data-sheet/PCA9450DS.pdf 28 - nxp,pca9450a 29 - nxp,pca9450b 30 - nxp,pca9450c 44 "^LDO[1-5]$": [all …]
|
H A D | rohm,bd71815-regulator.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 4 $id: http://devicetree.org/schemas/regulator/rohm,bd71815-regulator.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Matti Vaittinen <mazziesaccount@gmail.com> 14 see Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml. 16 The regulator controller is represented as a sub-node of the PMIC node 33 regulator-name: 37 "^((ldo|buck)[1-5]|ldolpsr|ldodvref)$": 44 regulator-name: [all …]
|
/openbmc/linux/arch/arm/boot/dts/samsung/ |
H A D | exynos4210-trats.dts | 1 // SPDX-License-Identifier: GPL-2.0 12 /dts-v1/; 14 #include <dt-bindings/gpio/gpio.h> 19 chassis-type = "handset"; 37 stdout-path = "serial2:115200n8"; 40 vemmc_reg: regulator-0 { 41 compatible = "regulator-fixed"; 42 regulator-name = "VMEM_VDD_2.8V"; 43 regulator-min-microvolt = <2800000>; 44 regulator-max-microvolt = <2800000>; [all …]
|
H A D | exynos4210-universal_c210.dts | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. 12 /dts-v1/; 14 #include <dt-bindings/gpio/gpio.h> 19 chassis-type = "handset"; 35 stdout-path = "serial2:115200n8"; 39 fixed-rate-clocks { 41 compatible = "samsung,clock-xxti"; 42 clock-frequency = <0>; 46 compatible = "samsung,clock-xusbxti"; [all …]
|
H A D | s5pv210-goni.dts | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. 13 /dts-v1/; 14 #include <dt-bindings/gpio/gpio.h> 15 #include <dt-bindings/interrupt-controller/irq.h> 16 #include <dt-bindings/input/input.h> 38 pmic_ap_clk: clock-0 { 40 compatible = "fixed-clock"; 41 #clock-cells = <0>; 42 clock-frequency = <32768>; [all …]
|
H A D | s5pv210-aquila.dts | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. 13 /dts-v1/; 14 #include <dt-bindings/gpio/gpio.h> 15 #include <dt-bindings/input/input.h> 35 pmic_ap_clk: clock-0 { 37 compatible = "fixed-clock"; 38 #clock-cells = <0>; 39 clock-frequency = <32768>; 42 vtf_reg: regulator-0 { [all …]
|
H A D | exynos4210-i9100.dts | 1 // SPDX-License-Identifier: GPL-2.0 3 * Samsung's Exynos4210 based Galaxy S2 (GT-I9100 version) device tree 11 /dts-v1/; 13 #include "exynos4412-ppmu-common.dtsi" 15 #include <dt-bindings/gpio/gpio.h> 16 #include <dt-bindings/input/linux-event-codes.h> 19 model = "Samsung Galaxy S2 (GT-I9100)"; 21 chassis-type = "handset"; 35 stdout-path = "serial2:115200n8"; 38 vemmc_reg: regulator-0 { [all …]
|
H A D | s5pv210-aries.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 /dts-v1/; 7 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/interrupt-controller/irq.h> 32 reserved-memory { 33 #address-cells = <1>; 34 #size-cells = <1>; 38 compatible = "shared-dma-pool"; 39 no-map; 44 compatible = "shared-dma-pool"; [all …]
|
H A D | exynos5250-spring.dts | 1 // SPDX-License-Identifier: GPL-2.0 9 /dts-v1/; 10 #include <dt-bindings/clock/samsung,s2mps11.h> 11 #include <dt-bindings/gpio/gpio.h> 12 #include <dt-bindings/interrupt-controller/irq.h> 13 #include <dt-bindings/input/input.h> 19 chassis-type = "laptop"; 33 stdout-path = "serial3:115200n8"; 36 gpio-keys { 37 compatible = "gpio-keys"; [all …]
|
H A D | exynos4412-itop-scp-core.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 13 #include <dt-bindings/clock/samsung,s2mps11.h> 14 #include <dt-bindings/gpio/gpio.h> 15 #include <dt-bindings/input/input.h> 17 #include "exynos4412-ppmu-common.dtsi" 18 #include "exynos-mfc-reserved-memory.dtsi" 31 compatible = "samsung,secure-firmware"; 35 fixed-rate-clocks { 37 compatible = "samsung,clock-xxti"; 38 clock-frequency = <0>; [all …]
|
H A D | exynos4210-origen.dts | 1 // SPDX-License-Identifier: GPL-2.0 5 * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. 7 * Copyright (c) 2010-2011 Linaro Ltd. 14 /dts-v1/; 16 #include <dt-bindings/gpio/gpio.h> 17 #include <dt-bindings/input/input.h> 18 #include <dt-bindings/leds/common.h> 19 #include "exynos-mfc-reserved-memory.dtsi" 40 stdout-path = "serial2:115200n8"; 43 mmc_reg: voltage-regulator { [all …]
|
/openbmc/linux/arch/arm64/boot/dts/freescale/ |
H A D | imx8mm-innocomm-wb15.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 #include <dt-bindings/phy/phy-imx8-pcie.h> 10 reg_modem: regulator-modem { 11 compatible = "regulator-fixed"; 12 pinctrl-names = "default"; 13 pinctrl-0 = <&pinctrl_modem_regulator>; 14 regulator-min-microvolt = <3300000>; 15 regulator-max-microvolt = <3300000>; 16 regulator-name = "epdev_on"; 18 enable-active-high; [all …]
|
H A D | imx8mq-phanbell.dts | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 3 * Copyright 2017-2019 NXP 6 /dts-v1/; 9 #include <dt-bindings/interrupt-controller/irq.h> 13 compatible = "google,imx8mq-phanbell", "fsl,imx8mq"; 16 stdout-path = &uart1; 24 pmic_osc: clock-pmic { 25 compatible = "fixed-clock"; 26 #clock-cells = <0>; 27 clock-frequency = <32768>; [all …]
|
H A D | imx8mq-librem5-devkit.dts | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * Copyright 2018-2019 Purism SPC 6 /dts-v1/; 8 #include "dt-bindings/input/input.h" 9 #include <dt-bindings/interrupt-controller/irq.h> 10 #include <dt-bindings/leds/common.h> 11 #include "dt-bindings/pwm/pwm.h" 12 #include "dt-bindings/usb/pd.h" 17 compatible = "purism,librem5-devkit", "fsl,imx8mq"; 19 backlight_dsi: backlight-dsi { [all …]
|
H A D | imx8mq-pico-pi.dts | 1 // SPDX-License-Identifier: GPL-2.0+ 9 /dts-v1/; 12 #include <dt-bindings/interrupt-controller/irq.h> 15 model = "TechNexion PICO-PI-8M"; 16 compatible = "technexion,pico-pi-imx8m", "fsl,imx8mq"; 19 stdout-path = &uart1; 22 pmic_osc: clock-pmic { 23 compatible = "fixed-clock"; 24 #clock-cells = <0>; 25 clock-frequency = <32768>; [all …]
|
/openbmc/linux/arch/arm/boot/dts/rockchip/ |
H A D | rk3288-veyron-brain.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 8 /dts-v1/; 9 #include "rk3288-veyron.dtsi" 10 #include "rk3288-veyron-broadcom-bluetooth.dtsi" 14 compatible = "google,veyron-brain-rev0", "google,veyron-brain", 17 vcc33_sys: vcc33-sys { 18 vin-supply = <&vcc_5v>; 22 compatible = "regulator-fixed"; 23 regulator-name = "vcc33_io"; 24 regulator-always-on; [all …]
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | rk3288-veyron-jerry.dts | 1 // SPDX-License-Identifier: GPL-2.0 8 /dts-v1/; 9 #include "rk3288-veyron-chromebook.dtsi" 10 #include "cros-ec-sbs.dtsi" 14 compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", 15 "google,veyron-jerry-rev5", "google,veyron-jerry-rev4", 16 "google,veyron-jerry-rev3", "google,veyron-jerry", 20 stdout-path = &uart2; 23 panel_regulator: panel-regulator { 24 compatible = "regulator-fixed"; [all …]
|
H A D | exynos5250-spring.dts | 1 // SPDX-License-Identifier: GPL-2.0 9 /dts-v1/; 10 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/interrupt-controller/irq.h> 12 #include <dt-bindings/input/input.h> 48 samsung,bl1-offset = <0x1400>; 49 samsung,bl2-offset = <0x3400>; 50 u-boot-memory = "/memory"; 51 u-boot-offset = <0x3e00000 0x100000>; 56 #address-cells = <1>; [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/pinctrl/ |
H A D | pinctrl-max77620.txt | 6 Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt> 11 -------------------------- 14 - pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>. 15 - pinctrl[0...n]: Properties to contain the phandle for pinctrl states per 16 <pinctrl-bindings.txt>. 19 sub-node have following properties: 22 ------------------ 23 - pins: List of pins. Valid values of pins properties are: 27 ------------------- 29 <pinctrl-bindings.txt>. Absence of properties will leave the configuration [all …]
|