/openbmc/linux/Documentation/devicetree/bindings/display/bridge/ |
H A D | samsung,mipi-dsim.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/display/bridge/samsung,mipi-dsim.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Inki Dae <inki.dae@samsung.com> 11 - Jagan Teki <jagan@amarulasolutions.com> 12 - Marek Szyprowski <m.szyprowski@samsung.com> 21 - enum: 22 - samsung,exynos3250-mipi-dsi 23 - samsung,exynos4210-mipi-dsi [all …]
|
/openbmc/linux/arch/arm64/boot/dts/freescale/ |
H A D | imx8dxl-ss-conn.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 6 /delete-node/ &enet1_lpcg; 7 /delete-node/ &fec2; 10 conn_enet0_root_clk: clock-conn-enet0-root { 11 compatible = "fixed-clock"; 12 #clock-cells = <0>; 13 clock-frequency = <250000000>; 14 clock-output-names = "conn_enet0_root_clk"; 18 compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a"; 20 interrupt-parent = <&gic>; [all …]
|
H A D | imx8-ss-conn.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * Copyright 2018-2019 NXP 7 #include <dt-bindings/clock/imx8-lpcg.h> 8 #include <dt-bindings/firmware/imx/rsrc.h> 11 compatible = "simple-bus"; 12 #address-cells = <1>; 13 #size-cells = <1>; 16 conn_axi_clk: clock-conn-axi { 17 compatible = "fixed-clock"; 18 #clock-cells = <0>; [all …]
|
H A D | imx8mm-venice-gw72xx-0x-rpidsi.dtso | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 #include <dt-bindings/gpio/gpio.h> 8 #include "imx8mm-pinfunc.h" 10 /dts-v1/; 14 compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm"; 17 compatible = "powertip,ph800480t013-idf02"; 18 power-supply = <&attiny>; 23 remote-endpoint = <&bridge_out>; 30 #address-cells = <1>; 31 #size-cells = <0>; [all …]
|
H A D | imx8mm-venice-gw73xx-0x-rpidsi.dtso | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 #include <dt-bindings/gpio/gpio.h> 8 #include "imx8mm-pinfunc.h" 10 /dts-v1/; 14 compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm"; 17 compatible = "powertip,ph800480t013-idf02"; 18 power-supply = <&attiny>; 23 remote-endpoint = <&bridge_out>; 30 #address-cells = <1>; 31 #size-cells = <0>; [all …]
|
H A D | imx8mp-venice-gw74xx-rpidsi.dtso | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 10 compatible = "gateworks,imx8mp-gw74xx", "fsl,imx8mp"; 13 compatible = "powertip,ph800480t013-idf02"; 14 power-supply = <&attiny>; 19 remote-endpoint = <&bridge_out>; 26 #address-cells = <1>; 27 #size-cells = <0>; 30 compatible = "raspberrypi,7inch-touchscreen-panel-regulator"; 40 samsung,burst-clock-frequency = <891000000>; [all …]
|
/openbmc/linux/arch/arm/boot/dts/ti/omap/ |
H A D | omap2420-n8x0-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 11 stdout-path = &uart3; 16 compatible = "i2c-cbus-gpio"; 21 #address-cells = <1>; 22 #size-cells = <0>; 25 interrupt-parent = <&gpio4>; 34 clock-frequency = <400000>; 44 clock-frequency = <400000>; 50 /* gpio-irq for dma: 26 */ 53 #address-cells = <1>; [all …]
|
H A D | omap3-n950-n9.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 3 * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff) 13 cpu0-supply = <&vcc>; 23 compatible = "regulator-fixed"; 24 regulator-name = "VEMMC"; 25 regulator-min-microvolt = <2900000>; 26 regulator-max-microvolt = <2900000>; 28 startup-delay-us = <150>; 29 enable-active-high; 33 compatible = "regulator-fixed"; [all …]
|
H A D | omap-zoom-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 #include "omap-gpmc-smsc911x.dtsi" 20 bank-width = <2>; 21 reg-shift = <1>; 22 reg-io-width = <1>; 23 interrupt-parent = <&gpio4>; 25 clock-frequency = <1843200>; 26 current-speed = <115200>; 27 gpmc,mux-add-data = <0>; 28 gpmc,device-width = <1>; [all …]
|
/openbmc/linux/arch/arm64/boot/dts/xilinx/ |
H A D | zynqmp-zc1751-xm017-dc3.dts | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * dts file for Xilinx ZynqMP zc1751-xm017-dc3 5 * (C) Copyright 2016 - 2021, Xilinx, Inc. 10 /dts-v1/; 13 #include "zynqmp-clk-ccf.dtsi" 14 #include <dt-bindings/phy/phy.h> 17 model = "ZynqMP zc1751-xm017-dc3 RevA"; 18 compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp"; 34 stdout-path = "serial0:115200n8"; 43 compatible = "fixed-clock"; [all …]
|
H A D | zynqmp-sck-kv-g-revA.dtso | 1 // SPDX-License-Identifier: GPL-2.0 5 * (C) Copyright 2020 - 2022, Xilinx, Inc. 6 * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. 9 * "A" - A01 board un-modified (NXP) 10 * "Y" - A01 board modified with legacy interposer (Nexperia) 11 * "Z" - A01 board modified with Diode interposer 16 #include <dt-bindings/gpio/gpio.h> 17 #include <dt-bindings/net/ti-dp83867.h> 18 #include <dt-bindings/phy/phy.h> 19 #include <dt-bindings/pinctrl/pinctrl-zynqmp.h> [all …]
|
H A D | zynqmp-zc1751-xm015-dc1.dts | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * dts file for Xilinx ZynqMP zc1751-xm015-dc1 5 * (C) Copyright 2015 - 2022, Xilinx, Inc. 6 * (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc. 11 /dts-v1/; 14 #include "zynqmp-clk-ccf.dtsi" 15 #include <dt-bindings/phy/phy.h> 16 #include <dt-bindings/gpio/gpio.h> 17 #include <dt-bindings/pinctrl/pinctrl-zynqmp.h> 20 model = "ZynqMP zc1751-xm015-dc1 RevA"; [all …]
|
/openbmc/linux/include/sound/ |
H A D | ak4117.h | 1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 11 #define AK4117_REG_CLOCK 0x01 /* clock control */ 23 #define AK4117_REG_Pc0 0x0d /* burst preamble Pc byte 0 */ 24 #define AK4117_REG_Pc1 0x0e /* burst preamble Pc byte 1 */ 25 #define AK4117_REG_Pd0 0x0f /* burst preamble Pd byte 0 */ 26 #define AK4117_REG_Pd1 0x10 /* burst preamble Pd byte 1 */ 27 #define AK4117_REG_QSUB_ADDR 0x11 /* Q-subcode address + control */ 28 #define AK4117_REG_QSUB_TRACK 0x12 /* Q-subcode track */ 29 #define AK4117_REG_QSUB_INDEX 0x13 /* Q-subcode index */ 30 #define AK4117_REG_QSUB_MINUTE 0x14 /* Q-subcode minute */ [all …]
|
H A D | ak4114.h | 1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 29 #define AK4114_REG_Pc0 0x12 /* burst preamble Pc byte 0 */ 30 #define AK4114_REG_Pc1 0x13 /* burst preamble Pc byte 1 */ 31 #define AK4114_REG_Pd0 0x14 /* burst preamble Pd byte 0 */ 32 #define AK4114_REG_Pd1 0x15 /* burst preamble Pd byte 1 */ 33 #define AK4114_REG_QSUB_ADDR 0x16 /* Q-subcode address + control */ 34 #define AK4114_REG_QSUB_TRACK 0x17 /* Q-subcode track */ 35 #define AK4114_REG_QSUB_INDEX 0x18 /* Q-subcode index */ 36 #define AK4114_REG_QSUB_MINUTE 0x19 /* Q-subcode minute */ 37 #define AK4114_REG_QSUB_SECOND 0x1a /* Q-subcode second */ [all …]
|
H A D | ak4113.h | 1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 42 /* burst preamble Pc byte 0 */ 44 /* burst preamble Pc byte 1 */ 46 /* burst preamble Pd byte 0 */ 48 /* burst preamble Pd byte 1 */ 50 /* Q-subcode address + control */ 52 /* Q-subcode track */ 54 /* Q-subcode index */ 56 /* Q-subcode minute */ 58 /* Q-subcode second */ [all …]
|
/openbmc/u-boot/doc/device-tree-bindings/video/ |
H A D | exynos_mipi_dsi.txt | 1 Exynos MIPI-DSIM Controller 6 compatible: should be "samsung,exynos-mipi-dsi" 7 reg: Base address of MIPI-DSIM IP. 10 samsung,dsim-config-e-interface: interface to be used (RGB interface 12 samsung,dsim-config-e-virtual-ch: virtual channel number that main 14 samsung,dsim-config-e-pixel-format: pixel stream format for main 16 samsung,dsim-config-e-burst-mode: selects Burst mode in Video mode. 17 in Non-burst mode, RGB data area is filled with RGB data and 19 samsung,dsim-config-e-no-data-lane: data lane count used by Master. 20 samsung,dsim-config-e-byte-clk: select byte clock source. [all …]
|
/openbmc/linux/Documentation/devicetree/bindings/display/tilcdc/ |
H A D | panel.txt | 1 Device-Tree bindings for tilcdc DRM generic panel output driver 4 - compatible: value should be "ti,tilcdc,panel". 5 - panel-info: configuration info to configure LCDC correctly for the panel 6 - ac-bias: AC Bias Pin Frequency 7 - ac-bias-intrpt: AC Bias Pin Transitions per Interrupt 8 - dma-burst-sz: DMA burst size 9 - bpp: Bits per pixel 10 - fdd: FIFO DMA Request Delay 11 - sync-edge: Horizontal and Vertical Sync Edge: 0=rising 1=falling 12 - sync-ctrl: Horizontal and Vertical Sync: Control: 0=ignore [all …]
|
/openbmc/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx7ulp.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 4 * Copyright 2017-2018 NXP 8 #include <dt-bindings/clock/imx7ulp-clock.h> 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 12 #include "imx7ulp-pinfunc.h" 15 interrupt-parent = <&intc>; 17 #address-cells = <1>; 18 #size-cells = <1>; 37 #address-cells = <1>; [all …]
|
H A D | imx6sll.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 4 * Copyright 2017-2018 NXP. 8 #include <dt-bindings/clock/imx6sll-clock.h> 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 #include "imx6sll-pinfunc.h" 14 #address-cells = <1>; 15 #size-cells = <1>; 46 #address-cells = <1>; 47 #size-cells = <0>; [all …]
|
/openbmc/u-boot/board/armadeus/apf27/ |
H A D | apf27.h | 1 /* SPDX-License-Identifier: GPL-2.0+ */ 3 * Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org> 26 * MPU CLOCK source before PLL 27 * ACFG_CLK_FREQ (2/3 MPLL clock or ext 266 MHZ) 35 /* Serial clock source before PLL (should be named ACFG_SYSPLL_CLK_FREQ)*/ 40 /* ARM bus frequency (have to be a CONFIG_MPLL_FREQ ratio) */ 43 /* external bus frequency (have to be a ACFG_CLK_FREQ ratio) */ 57 /* external bus frequency (have to be a CONFIG_HCLK_FREQ ratio) */ 58 #define CONFIG_NFC_FREQ 44 /* NFC Clock up to 44 MHz wh 133MHz */ 60 /* external serial bus frequency (have to be a CONFIG_SPLL_FREQ ratio) */ [all …]
|
/openbmc/u-boot/arch/arm/dts/ |
H A D | imx7ulp.dtsi | 2 * Copyright 2015-2016 Freescale Semiconductor, Inc. 9 #include <dt-bindings/clock/imx7ulp-clock.h> 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 #include <dt-bindings/gpio/gpio.h> 13 #include "imx7ulp-pinfunc.h" 16 interrupt-parent = <&intc>; 37 #address-cells = <1>; 38 #size-cells = <0>; 41 compatible = "arm,cortex-a7"; 47 reserved-memory { [all …]
|
H A D | imx6sx.dtsi | 9 #include <dt-bindings/clock/imx6sx-clock.h> 10 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/input/input.h> 12 #include <dt-bindings/interrupt-controller/arm-gic.h> 13 #include "imx6sx-pinfunc.h" 55 #address-cells = <1>; 56 #size-cells = <0>; 59 compatible = "arm,cortex-a9"; 62 next-level-cache = <&L2>; 63 operating-points = < [all …]
|
H A D | imx6ul.dtsi | 9 #include <dt-bindings/clock/imx6ul-clock.h> 10 #include <dt-bindings/gpio/gpio.h> 11 #include <dt-bindings/input/input.h> 12 #include <dt-bindings/interrupt-controller/arm-gic.h> 13 #include "imx6ul-pinfunc.h" 54 #address-cells = <1>; 55 #size-cells = <0>; 58 compatible = "arm,cortex-a7"; 61 clock-latency = <61036>; /* two CLK32 periods */ 62 operating-points = < [all …]
|
/openbmc/linux/arch/powerpc/include/asm/ |
H A D | mpc5121.h | 1 /* SPDX-License-Identifier: GPL-2.0-only */ 23 * Clock Control Module 27 u32 sccr1; /* System Clock Control Register 1 */ 28 u32 sccr2; /* System Clock Control Register 2 */ 29 u32 scfr1; /* System Clock Frequency Register 1 */ 30 u32 scfr2; /* System Clock Frequency Register 2 */ 31 u32 scfr2s; /* System Clock Frequency Shadow Register 2 */ 33 u32 psc_ccr[12]; /* PSC Clock Control Registers */ 34 u32 spccr; /* SPDIF Clock Control Register */ 35 u32 cccr; /* CFM Clock Control Register */ [all …]
|
/openbmc/qemu/hw/sh4/ |
H A D | sh7750_regs.h | 2 * SH-7750 memory-mapped registers 6 * Document Number ADE-602-124C, Rev. 4.0, 4/21/00, Hitachi Ltd. 8 * Copyright (C) 2001 OKTET Ltd., St.-Petersburg, Russia 42 * All register has 2 addresses: in 0xff000000 - 0xffffffff (P4 address) and 43 * in 0x1f000000 - 0x1fffffff (area 7 address) 55 /* Page Table Entry High register - PTEH */ 64 /* Page Table Entry Low register - PTEL */ 70 #define SH7750_PTEL_V 0x00000100 /* Validity (0-entry is invalid) */ 73 #define SH7750_PTEL_SZ_1KB 0x00000000 /* 1-kbyte page */ 74 #define SH7750_PTEL_SZ_4KB 0x00000010 /* 4-kbyte page */ [all …]
|