| /openbmc/linux/Documentation/devicetree/bindings/mfd/ |
| H A D | samsung,s5m8767.yaml | 47 s5m8767,pmic-buck3-dvs-voltage:
52 A set of 8 voltage values in micro-volt (uV) units for buck3 when
74 s5m8767,pmic-buck3-uses-gpio-dvs:
76 description: buck3 can be controlled by gpio dvs.
104 description: Power supply for buck3
147 s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ]
150 …s5m8767,pmic-buck3-uses-gpio-dvs: [ 's5m8767,pmic-buck-dvs-gpios', 's5m8767,pmic-buck3-dvs-voltage…
159 - s5m8767,pmic-buck3-uses-gpio-dvs
166 - s5m8767,pmic-buck3-uses-gpio-dvs
204 s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
|
| H A D | ti,lp87524-q1.yaml | 45 - buck3
61 - buck3-in-supply
82 buck3-in-supply = <&vdd_5v0>;
106 buck3_reg: buck3 {
107 regulator-name = "buck3";
|
| H A D | richtek,rt5120.yaml | 56 description: phandle for buck3 input power source
147 buck3 {
148 regulator-name = "rt5120-buck3";
|
| H A D | da9052-i2c.txt | 21 buck3 : regulator BUCK MEM
56 buck3 {
|
| H A D | rohm,bd71828-pmic.yaml | 125 buck3: BUCK3 {
126 regulator-name = "buck3";
|
| H A D | rohm,bd71815-pmic.yaml | 137 buck3: buck3 {
138 regulator-name = "buck3";
|
| H A D | rohm,bd71847-pmic.yaml | 170 buck3: BUCK3 {
171 regulator-name = "buck3";
|
| H A D | rohm,bd71837-pmic.yaml | 167 buck3: BUCK3 {
168 regulator-name = "buck3";
|
| H A D | da9062.txt | 59 buck3 : BUCK_3
70 buck3 : BUCK_3
|
| H A D | st,stpmic1.yaml | 90 - buck3 for Buck BUCK3
315 buck3 {
|
| /openbmc/linux/drivers/regulator/ |
| H A D | tps65086-regulator.c | 17 enum tps65086_regulators { BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, LDOA1, enumerator
146 TPS65086_REGULATOR("BUCK3", "buck3", BUCK3, 0x80, TPS65086_BUCK3VID,
186 TPS65086_REGULATOR("BUCK3", "buck3", BUCK3, 0x80, TPS65086_BUCK3VID,
225 TPS65086_REGULATOR("BUCK3", "buck3", BUCK3, 0x80, TPS65086_BUCK3VID,
264 TPS65086_REGULATOR("BUCK3", "buck3", BUCK3, 0x80, TPS65086_BUCK3VID,
321 case BUCK3: in tps65086_of_parse_cb()
|
| H A D | tps65219-regulator.c | 46 { "BUCK3_SCG", "BUCK3", "short circuit to ground", REGULATOR_EVENT_REGULATION_OUT },
47 { "BUCK3_OC", "BUCK3", "overcurrent", REGULATOR_EVENT_OVER_CURRENT },
48 { "BUCK3_NEG_OC", "BUCK3", "negative overcurrent", REGULATOR_EVENT_OVER_CURRENT },
49 { "BUCK3_UV", "BUCK3", "undervoltage", REGULATOR_EVENT_UNDER_VOLTAGE },
60 { "BUCK3_RV", "BUCK3", "residual voltage", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
69 { "BUCK3_RV_SD", "BUCK3", "residual voltage on shutdown",
234 TPS65219_REGULATOR("BUCK3", "buck3", TPS65219_BUCK_3,
|
| H A D | tps6594-regulator.c | 177 TPS6594_REGULATOR("BUCK3", "buck3", TPS6594_BUCK_3,
217 { TPS6594_IRQ_NAME_BUCK3_OV, "BUCK3", "overvoltage", REGULATOR_EVENT_OVER_VOLTAGE_WARN },
218 { TPS6594_IRQ_NAME_BUCK3_UV, "BUCK3", "undervoltage", REGULATOR_EVENT_UNDER_VOLTAGE },
219 { TPS6594_IRQ_NAME_BUCK3_SC, "BUCK3", "short circuit", REGULATOR_EVENT_REGULATION_OUT },
220 { TPS6594_IRQ_NAME_BUCK3_ILIM, "BUCK3", "reach ilim, overcurrent",
|
| H A D | lp8788-buck.c | 84 BUCK3, enumerator
393 .name = "buck3",
394 .id = BUCK3,
466 /* no dvs for buck3, 4 */ in lp8788_init_dvs()
|
| H A D | da9052-regulator.c | 333 DA9052_DCDC(BUCK3, buck3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO),
350 DA9052_DCDC(BUCK3, buck3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO),
|
| H A D | mcp16502.c | 97 /* Ramp delay (uV/us) for buck2, buck3, buck4. */
137 BUCK3, enumerator
312 case BUCK3: in mcp16502_set_voltage_time_sel()
475 MCP16502_REGULATOR("VDD_CORE", BUCK3, b234_ranges, mcp16502_buck_ops,
|
| /openbmc/linux/Documentation/devicetree/bindings/regulator/ |
| H A D | pv88090.txt | 11 BUCK1, BUCK2, BUCK3, LDO1, and LDO2.
42 BUCK3 {
43 regulator-name = "buck3";
|
| H A D | pv88080.txt | 17 BUCK1, BUCK2, BUCK3 and HVBUCK.
47 BUCK3 {
48 regulator-name = "buck3";
|
| H A D | richtek,rt5190a-regulator.yaml | 35 description: phandle to buck3 input voltage.
120 buck3 {
121 regulator-name = "rt5190a-buck3";
|
| H A D | richtek,rtq2134-regulator.yaml | 93 buck3 {
94 regulator-name = "rtq2134-buck3";
|
| H A D | ti,tps65219.yaml | 105 buck3-supply = <&vcc_3v3_sys>;
134 buck3_reg: buck3 {
|
| /openbmc/linux/arch/arm64/boot/dts/freescale/ |
| H A D | imx8mm-emtop-som.dtsi | 84 buck3: BUCK3 { label
85 regulator-name = "BUCK3";
|
| H A D | imx8mm-evkb.dts | 49 buck3_reg: BUCK3 {
50 regulator-name = "BUCK3";
|
| H A D | imx8mn-ddr4-evk.dts | 85 buck3_reg: BUCK3 {
87 regulator-name = "buck3";
|
| H A D | imx8mq-pico-pi.dts | 99 buck3: BUCK3 { label
100 regulator-name = "buck3";
|