| /openbmc/linux/Documentation/arch/x86/x86_64/ |
| H A D | mm.rst | 13 from the top of the 64-bit address space. It's easier to understand the layout
17 64-bit address space (ffffffffffffffff).
20 from TB to GB and then MB/KB.
24 It also shows it nicely how incredibly large 64-bit address space is.
35 …0000800000000000 | +128 TB | ffff7fffffffffff | ~16M TB | ... huge, almost 64 bits wide hole of…
45 …ffff888000000000 | -119.5 TB | ffffc87fffffffff | 64 TB | direct mapping of all physical memory…
63 ffffffef00000000 | -68 GB | fffffffeffffffff | 64 GB | EFI region mapping space
65 …ffffffff80000000 | -2 GB | ffffffff9fffffff | 512 MB | kernel text mapping, mapped to physic…
66 ffffffff80000000 |-2048 MB | | |
67 ffffffffa0000000 |-1536 MB | fffffffffeffffff | 1520 MB | module mapping space
[all …]
|
| /openbmc/qemu/tests/qemu-iotests/ |
| H A D | 084.out | 8 virtual size: 64 MiB (67108864 bytes)
17 virtual size: 64 MiB (67108864 bytes)
20 Test 1: Maximum size (512 TB - 128 MB):
26 Test 2: Size too large (512 TB - 128 MB + 64 kB)
29 Test 3: Size valid (64M), but Blocks In Image too small (63)
32 Test 4: Size valid (64M), but Blocks In Image exceeds max allowed
35 Test 5: Valid Image: 64MB, Blocks In Image 64, Block Size 1MB
38 virtual size: 64 MiB (67108864 bytes)
41 Test 6: Block Size != 1MB; too small test (1MB - 1)
44 Test 7: Block Size != 1MB; too large test (1MB + 64KB)
|
| H A D | 084 | 46 size=64M
68 echo "Test 1: Maximum size (512 TB - 128 MB):"
74 echo "Test 2: Size too large (512 TB - 128 MB + 64 kB)"
80 echo "Test 3: Size valid (64M), but Blocks In Image too small (63)"
81 # This sets the size to 64M, but with a blocks_in_image size that is
84 # For a 64M image, we would need a blocks_in_image value of at least 64,
90 echo "Test 4: Size valid (64M), but Blocks In Image exceeds max allowed"
96 # Finally, 1MB is the only block size supported. Verify that
97 # a value != 1MB results in error, both smaller and larger
99 echo "Test 5: Valid Image: 64MB, Blocks In Image 64, Block Size 1MB"
[all …]
|
| /openbmc/u-boot/arch/mips/mach-bmips/ |
| H A D | Kconfig | 134 Broadcom BCM968380GERG reference board with BCM68380 SoC with 512 MB
135 of RAM and 128 MB of flash (nand).
145 Comtrend AR-5315u boards have a BCM6318 SoC with 64 MB of RAM and 16
146 MB of flash (SPI).
156 Comtrend AR-5387un boards have a BCM6328 SoC with 64 MB of RAM and 16
157 MB of flash (SPI).
167 Comtrend CT-5361 boards have a BCM6348 SoC with 16 MB of RAM and 4 MB
178 Comtrend VR-3032u boards have a BCM63268 SoC with 64 MB of RAM and
179 128 MB of flash (NAND).
189 Comtrend WAP-5813n boards have a BCM6369 SoC with 64 MB of RAM and
[all …]
|
| /openbmc/u-boot/board/freescale/t102xrdb/ |
| H A D | README | 4 combines two or one 64-bit Power Architecture e5500 core respectively with high
15 - Up to 1.4 GHz with 64-bit ISA support (Power Architecture v2.06-compliant)
24 - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
71 DDR: 64-bit 32-bit
82 - Supports 64-bit 4GB DDR3L DIMM
87 - NOR: 128MB 16-bit NOR Flash
96 - On-board 64MB SPI flash
104 - T1023 SoC integrating two 64-bit e5500 cores up to 1.4GHz
115 - NOR: 128MB S29GL01GS110TFIV10 Spansion NOR Flash
116 - NAND: 512MB S34MS04G200BFI000 Spansion NAND Flash
[all …]
|
| /openbmc/u-boot/board/freescale/ls1046ardb/ |
| H A D | README | 27 - 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s
29 - One 512 MB NAND flash with ECC support
34 - DSPI: 64 MB high-speed flash Memory for boot code and storage (up to 108MHz)
44 0x00_0000_0000 - 0x00_000F_FFFF Secure Boot ROM 1MB
45 0x00_0100_0000 - 0x00_0FFF_FFFF CCSRBAR 240MB
46 0x00_1000_0000 - 0x00_1000_FFFF OCRAM0 64KB
47 0x00_1001_0000 - 0x00_1001_FFFF OCRAM1 64KB
48 0x00_2000_0000 - 0x00_20FF_FFFF DCSR 16MB
49 0x00_7E80_0000 - 0x00_7E80_FFFF IFC - NAND Flash 64KB
61 0x00_4000_0000 - 0x00_400F_FFFF RCW + PBI 1MB
[all …]
|
| /openbmc/u-boot/board/freescale/t1040qds/ |
| H A D | README | 8 The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA
17 - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving
66 - NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB
100 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
101 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
102 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
103 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
104 0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB
105 0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB
106 0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB
[all …]
|
| /openbmc/linux/Documentation/admin-guide/cgroup-v1/ |
| H A D | hugetlb.rst | 34 For a system supporting three hugepage sizes (64k, 32M and 1G), the control
46 hugetlb.64KB.limit_in_bytes
47 hugetlb.64KB.max_usage_in_bytes
48 hugetlb.64KB.numa_stat
49 hugetlb.64KB.usage_in_bytes
50 hugetlb.64KB.failcnt
51 hugetlb.64KB.rsvd.limit_in_bytes
52 hugetlb.64KB.rsvd.max_usage_in_bytes
53 hugetlb.64KB.rsvd.usage_in_bytes
54 hugetlb.64KB.rsvd.failcnt
[all …]
|
| /openbmc/linux/arch/x86/kernel/cpu/ |
| H A D | cacheinfo.c | 53 #define MB(x) ((x) * 1024) macro
62 { 0x09, LVL_1_INST, 32 }, /* 4-way set assoc, 64 byte line size */
65 { 0x0d, LVL_1_DATA, 16 }, /* 4-way set assoc, 64 byte line size */
66 { 0x0e, LVL_1_DATA, 24 }, /* 6-way set assoc, 64 byte line size */
67 { 0x21, LVL_2, 256 }, /* 8-way set assoc, 64 byte line size */
68 { 0x22, LVL_3, 512 }, /* 4-way set assoc, sectored cache, 64 byte line size */
69 { 0x23, LVL_3, MB(1) }, /* 8-way set assoc, sectored cache, 64 byte line size */
70 { 0x25, LVL_3, MB(2) }, /* 8-way set assoc, sectored cache, 64 byte line size */
71 { 0x29, LVL_3, MB(4) }, /* 8-way set assoc, sectored cache, 64 byte line size */
72 { 0x2c, LVL_1_DATA, 32 }, /* 8-way set assoc, 64 byte line size */
[all …]
|
| /openbmc/u-boot/board/freescale/m547xevb/ |
| H A D | README | 135 Flash: 0xFF800000-0xFFFFFFFF (8MB)
136 DDR: 0x00000000-0x3FFFFFFF (1024MB)
138 PCI: 0x70000000-0x8FFFFFFF (512MB)
139 IP: 0xF0000000-0xFFFFFFFF (256MB)
151 make M5475AFE_config, or - boot 2MB, RAM 64MB
152 make M5475BFE_config, or - boot 2MB, code 16MB, RAM 64MB
153 make M5475CFE_config, or - boot 2MB, code 16MB, Video, USB, RAM 64MB
154 make M5475DFE_config, or - boot 2MB, USB, RAM 64MB
155 make M5475EFE_config, or - boot 2MB, Video, USB, RAM 64MB
156 make M5475FFE_config, or - boot 2MB, code 32MB, Video, USB, RAM 128MB
[all …]
|
| /openbmc/linux/arch/parisc/include/asm/ |
| H A D | assembly.h | 20 #define FRAME_SIZE 64
26 /* Frame alignment for 32- and 64-bit */
27 #define FRAME_ALIGN 64
62 #define LDREGM ldd,mb
81 /* the 64-bit pa gnu assembler unfortunately defaults to .level 1.1 or 2.0 so
141 depd,z \r, 63-(\sa), 64-(\sa), \t
151 extrd,u \r, 63-(\sa), 64-(\sa), \t
154 /* Extract unsigned for 32- and 64-bit
314 fldd,mb -8(\regs), %fr30
315 fldd,mb -8(\regs), %fr29
[all …]
|
| /openbmc/u-boot/include/configs/ |
| H A D | sbc8548.h | 49 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
120 #define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */
128 * Two banks, one 8MB the other 64MB, using the CFI driver.
130 * CS0 the 8MB boot flash, and CS6 the 64MB flash.
133 * ec00_0000 efff_ffff 64MB SODIMM
134 * ff80_0000 ffff_ffff 8MB soldered flash
137 * ef80_0000 efff_ffff 8MB soldered flash
138 * fc00_0000 ffff_ffff 64MB SODIMM
186 * Addr Mask = 64M = OR1[0:16] = 1111 1100 0000 0000 0
207 * Addr Mask = 64M = OR6[0:16] = 1111 1100 0000 0000 0
[all …]
|
| /openbmc/u-boot/board/freescale/t208xrdb/ |
| H A D | README | 12 - Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz
13 - 2MB L2 cache and 512KB CoreNet platform cache (CPC)
15 - One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
69 - NOR: 128MB 16-bit NOR Flash
80 - On-board 64MB SPI flash
90 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
91 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
92 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
93 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
94 0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB
[all …]
|
| /openbmc/linux/drivers/accel/habanalabs/include/gaudi2/ |
| H A D | gaudi2.h | 16 #define CFG_BAR_SIZE 0x10000000ull /* 256MB */
21 #define CFG_SIZE 0x8000000ull /* 96MB CFG + 32MB DBG*/
22 #define CFG_REGION_SIZE 0xC000000ull /* 192MB */
24 #define STM_FLASH_BASE_ADDR 0x1000007FF4000000ull /* Not 256MB aligned */
25 #define STM_FLASH_ALIGNED_OFF 0x4000000ull /* 256 MB alignment */
26 #define STM_FLASH_SIZE 0x2000000ull /* 32MB */
29 #define SPI_FLASH_SIZE 0x1000000ull /* 16MB */
32 #define SCRATCHPAD_SRAM_SIZE 0x10000ull /* 64KB */
38 #define BAR0_RSRVD_SIZE 0x1000000ull /* 16MB */
41 #define SRAM_SIZE 0x3000000ull /* 48MB */
[all …]
|
| /openbmc/u-boot/board/freescale/t208xqds/ |
| H A D | README | 12 - Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz
13 - 2MB L2 cache and 512KB CoreNet platform cache (CPC)
15 - One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
52 - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
67 - 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA
69 - Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
125 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
126 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
127 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
128 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
[all …]
|
| /openbmc/linux/arch/ia64/ |
| H A D | Kconfig.debug | 8 bool "16MB"
10 IA-64 identity-mapped regions use a large page size called "granules".
12 Select "16MB" for a small granule size.
13 Select "64MB" for a large granule size. This is the current default.
16 bool "64MB"
22 bool "Print possible IA-64 dependency violations to console"
44 Selecting this option turns on bug checking for the IA-64
53 Selecting this option turns on bug checking for the IA-64 irq_save
|
| /openbmc/u-boot/board/freescale/t104xrdb/ |
| H A D | README | 39 The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA
48 - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving
110 - NOR: 128MB 16-bit NOR Flash
124 - On-board 64MB SPI flash
142 - NOR: 128MB 16-bit NOR Flash
158 - On-board 64MB SPI flash
169 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
170 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
171 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
172 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
[all …]
|
| /openbmc/u-boot/board/freescale/ls1043ardb/ |
| H A D | README | 24 - One 128MB NOR flash 16-bit data bus
25 - One 512 MB NAND flash with ECC support
30 - DSPI: 16 MB high-speed flash Memory for boot code and storage (up to 108MHz)
40 0x00_0000_0000 0x00_000F_FFFF Secure Boot ROM 1MB
41 0x00_0100_0000 0x00_0FFF_FFFF CCSRBAR 240MB
42 0x00_1000_0000 0x00_1000_FFFF OCRAM0 64KB
43 0x00_1001_0000 0x00_1001_FFFF OCRAM1 64KB
44 0x00_2000_0000 0x00_20FF_FFFF DCSR 16MB
45 0x00_6000_0000 0x00_67FF_FFFF IFC - NOR Flash 128MB
46 0x00_7E80_0000 0x00_7E80_FFFF IFC - NAND Flash 64KB
|
| /openbmc/u-boot/board/freescale/ls1046aqds/ |
| H A D | README | 23 - 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s
25 - One in-socket 128 MB NOR flash 16-bit data bus
26 - One 512 MB NAND flash with ECC support
48 0x00_0000_0000 - 0x00_000F_FFFF Secure Boot ROM 1MB
49 0x00_0100_0000 - 0x00_0FFF_FFFF CCSRBAR 240MB
50 0x00_1000_0000 - 0x00_1000_FFFF OCRAM0 64KB
51 0x00_1001_0000 - 0x00_1001_FFFF OCRAM1 64KB
52 0x00_2000_0000 - 0x00_20FF_FFFF DCSR 16MB
53 0x00_6000_0000 - 0x00_67FF_FFFF IFC - NOR Flash 128MB
54 0x00_7E80_0000 - 0x00_7E80_FFFF IFC - NAND Flash 64KB
|
| /openbmc/linux/tools/testing/selftests/tc-testing/tc-tests/qdiscs/ |
| H A D | fq_codel.json | 18 …]+ limit 10240p flows 1024 quantum.*target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64",
41 …9]+ limit 1000p flows 1024 quantum.*target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64",
64 …limit 10240p flows 1024 quantum.*target 5ms interval 100ms memory_limit 100000b ecn drop_batch 64",
87 …]+ limit 10240p flows 1024 quantum.*target 2ms interval 100ms memory_limit 32Mb ecn drop_batch 64",
110 …-9]+ limit 10240p flows 1024 quantum.*target 5ms interval 5ms memory_limit 32Mb ecn drop_batch 64",
133 …imit 10240p flows 1024 quantum 9000 target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 64",
156 …[0-9]+ limit 10240p flows 1024 quantum.*target 5ms interval 100ms memory_limit 32Mb drop_batch 64",
179 …ws 1024 quantum.*target 5ms ce_threshold 1.02s interval 100ms memory_limit 32Mb ecn drop_batch 64",
202 …+ limit 10240p flows 1024 quantum.*target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 100",
225 …9]+ limit 1000p flows 256 quantum.*target 5ms interval 100ms memory_limit 32Mb ecn drop_batch 100",
[all …]
|
| /openbmc/u-boot/board/freescale/t102xqds/ |
| H A D | README | 4 combines two or one 64-bit Power Architecture e5500 core respectively with high
15 - Up to 1.4 GHz with 64-bit ISA support (Power Architecture v2.06-compliant)
24 - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
71 DDR: 64-bit 32-bit
93 - NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB
114 - Switch selectable to one of 16 common settings in the interval of 64 MHz-166 MHz.
156 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
157 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
158 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
159 0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB
[all …]
|
| /openbmc/u-boot/board/freescale/ls1043aqds/ |
| H A D | README | 25 - One in-socket 128 MB NOR flash 16-bit data bus
26 - One 512 MB NAND flash with ECC support
48 0x00_0000_0000 0x00_000F_FFFF Secure Boot ROM 1MB
49 0x00_0100_0000 0x00_0FFF_FFFF CCSRBAR 240MB
50 0x00_1000_0000 0x00_1000_FFFF OCRAM0 64KB
51 0x00_1001_0000 0x00_1001_FFFF OCRAM1 64KB
52 0x00_2000_0000 0x00_20FF_FFFF DCSR 16MB
53 0x00_6000_0000 0x00_67FF_FFFF IFC - NOR Flash 128MB
54 0x00_7E80_0000 0x00_7E80_FFFF IFC - NAND Flash 64KB
|
| /openbmc/linux/Documentation/devicetree/bindings/pci/ |
| H A D | faraday,ftpci100.yaml | 22 "dual" variant has 64MiB. Take this into account when describing the ranges.
84 be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB,
85 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as
144 /* 64MiB at 0x00000000-0x03ffffff */
146 /* 64MiB at 0x00000000-0x03ffffff */
|
| /openbmc/u-boot/doc/ |
| H A D | README.b4860qds | 172 0xF_FFDF_1000 0xF_FFFF_FFFF Free 2 MB
174 0xF_FF81_0000 0xF_FFDE_FFFF Free 5 MB
175 0xF_FF80_0000 0xF_FF80_FFFF IFC NAND Flash 64 KB
176 0xF_FF00_0000 0xF_FF7F_FFFF Free 8 MB
177 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16 MB
178 0xF_F801_0000 0xF_FDFF_FFFF Free 95 MB
179 0xF_F800_0000 0xF_F800_FFFF PCIe I/O Space 64 KB
180 0xF_F600_0000 0xF_F7FF_FFFF QMAN s/w portal 32 MB
181 0xF_F400_0000 0xF_F5FF_FFFF BMAN s/w portal 32 MB
182 0xF_F000_0000 0xF_F3FF_FFFF Free 64 MB
[all …]
|
| /openbmc/linux/tools/perf/pmu-events/arch/arm64/freescale/yitian710/sys/ |
| H A D | metrics.json | 4 "BriefDescription": "The ddr read bandwidth(MB/s).",
6 "MetricExpr": "hif_rd * 64 / 1e6 / duration_time",
7 "ScaleUnit": "1MB/s",
13 "BriefDescription": "The ddr write bandwidth(MB/s).",
15 "MetricExpr": "(hif_wr + hif_rmw) * 64 / 1e6 / duration_time",
16 "ScaleUnit": "1MB/s",
|