Home
last modified time | relevance | path

Searched +full:4 +full:mb (Results 1 – 25 of 1104) sorted by relevance

12345678910>>...45

/openbmc/u-boot/arch/mips/mach-bmips/
H A DKconfig134 Broadcom BCM968380GERG reference board with BCM68380 SoC with 512 MB
135 of RAM and 128 MB of flash (nand).
136 Between its different peripherals there's an integrated switch with 4
145 Comtrend AR-5315u boards have a BCM6318 SoC with 64 MB of RAM and 16
146 MB of flash (SPI).
147 Between its different peripherals there's an integrated switch with 4
156 Comtrend AR-5387un boards have a BCM6328 SoC with 64 MB of RAM and 16
157 MB of flash (SPI).
158 Between its different peripherals there's an integrated switch with 4
167 Comtrend CT-5361 boards have a BCM6348 SoC with 16 MB of RAM and 4 MB
[all …]
/openbmc/u-boot/test/fs/
H A Dfs-test.sh41 # $SMALL_FILE is the name of the 1MB file in the file system image
42 SMALL_FILE="1MB.file"
54 # Full Path of the 1 MB file that shall be created in the fs image.
155 # 4th parameter is name of big file
216 FILE_BIG=$4
233 # 1MB is 0x0010 0000
253 # Test Case 4a - Read full 1MB of small file
256 # Test Case 4b - Read full 1MB of small file
260 # Test Case 5a - First 1MB of big file
263 # Test Case 5b - First 1MB of big file
[all …]
/openbmc/linux/arch/alpha/kernel/
H A Dio.c20 mb(); in ioread8()
22 mb(); in ioread8()
29 mb(); in ioread16()
31 mb(); in ioread16()
38 mb(); in ioread32()
40 mb(); in ioread32()
47 mb(); in ioread64()
49 mb(); in ioread64()
55 mb(); in iowrite8()
61 mb(); in iowrite16()
[all …]
H A Dcore_cia.c34 * NOTE: Herein lie back-to-back mb instructions. They are magic.
57 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
69 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
118 mb(); in conf_read()
125 mb(); in conf_read()
129 mb(); in conf_read()
133 mb(); in conf_read()
137 mb(); in conf_read()
138 mb(); /* magic */ in conf_read()
142 mb(); in conf_read()
[all …]
/openbmc/linux/drivers/accel/habanalabs/include/gaudi2/
H A Dgaudi2.h13 #define DRAM_BAR_ID 4
16 #define CFG_BAR_SIZE 0x10000000ull /* 256MB */
21 #define CFG_SIZE 0x8000000ull /* 96MB CFG + 32MB DBG*/
22 #define CFG_REGION_SIZE 0xC000000ull /* 192MB */
24 #define STM_FLASH_BASE_ADDR 0x1000007FF4000000ull /* Not 256MB aligned */
25 #define STM_FLASH_ALIGNED_OFF 0x4000000ull /* 256 MB alignment */
26 #define STM_FLASH_SIZE 0x2000000ull /* 32MB */
29 #define SPI_FLASH_SIZE 0x1000000ull /* 16MB */
38 #define BAR0_RSRVD_SIZE 0x1000000ull /* 16MB */
41 #define SRAM_SIZE 0x3000000ull /* 48MB */
[all …]
/openbmc/linux/drivers/scsi/qla2xxx/
H A Dqla_mbx.c95 * mb[MAX_MAILBOX_REGISTER_COUNT] = returned mailbox data.
161 mcp->mb[0] = MBS_LINK_DOWN_ERROR; in qla2x00_mailbox_command()
171 !is_rom_cmd(mcp->mb[0])) || ha->flags.eeh_busy) { in qla2x00_mailbox_command()
174 mcp->mb[0]); in qla2x00_mailbox_command()
188 mcp->mb[0]); in qla2x00_mailbox_command()
198 ha->flags.purge_mbox, ha->flags.eeh_busy, mcp->mb[0]); in qla2x00_mailbox_command()
208 "Prepare to issue mbox cmd=0x%x.\n", mcp->mb[0]); in qla2x00_mailbox_command()
228 iptr = mcp->mb; in qla2x00_mailbox_command()
229 command = mcp->mb[0]; in qla2x00_mailbox_command()
383 mcp->mb[ in qla2x00_mailbox_command()
418 uint16_t mb[8]; qla2x00_mailbox_command() local
2500 qla24xx_login_fabric(scsi_qla_host_t * vha,uint16_t loop_id,uint8_t domain,uint8_t area,uint8_t al_pa,uint16_t * mb,uint8_t opt) qla24xx_login_fabric() argument
2636 qla2x00_login_fabric(scsi_qla_host_t * vha,uint16_t loop_id,uint8_t domain,uint8_t area,uint8_t al_pa,uint16_t * mb,uint8_t opt) qla2x00_login_fabric() argument
3793 qla2x00_enable_fce_trace(scsi_qla_host_t * vha,dma_addr_t fce_dma,uint16_t buffers,uint16_t * mb,uint32_t * dwords) qla2x00_enable_fce_trace() argument
3894 qla2x00_get_idma_speed(scsi_qla_host_t * vha,uint16_t loop_id,uint16_t * port_speed,uint16_t * mb) qla2x00_get_idma_speed() argument
3937 qla2x00_set_idma_speed(scsi_qla_host_t * vha,uint16_t loop_id,uint16_t port_speed,uint16_t * mb) qla2x00_set_idma_speed() argument
4644 qla81xx_idc_ack(scsi_qla_host_t * vha,uint16_t * mb) qla81xx_idc_ack() argument
5502 qla81xx_write_mpi_register(scsi_qla_host_t * vha,uint16_t * mb) qla81xx_write_mpi_register() argument
5669 qla81xx_get_port_config(scsi_qla_host_t * vha,uint16_t * mb) qla81xx_get_port_config() argument
5704 qla81xx_set_port_config(scsi_qla_host_t * vha,uint16_t * mb) qla81xx_set_port_config() argument
5735 qla24xx_set_fcp_prio(scsi_qla_host_t * vha,uint16_t loop_id,uint16_t priority,uint16_t * mb) qla24xx_set_fcp_prio() argument
[all...]
/openbmc/u-boot/board/freescale/t102xrdb/
H A DREADME70 I2C controller: 4 3
82 - Supports 64-bit 4GB DDR3L DIMM
87 - NOR: 128MB 16-bit NOR Flash
96 - On-board 64MB SPI flash
114 - SerDes: 4 lanes up to 10.3125GHz
115 - NOR: 128MB S29GL01GS110TFIV10 Spansion NOR Flash
116 - NAND: 512MB S34MS04G200BFI000 Spansion NAND Flash
117 - eSPI: 64MB S25FL512SAGMFI010 Spansion SPI flash.
129 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
131 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
[all …]
/openbmc/u-boot/arch/x86/cpu/ivybridge/
H A Dsdram.c242 * 00000000 0000MB-1992MB 1992MB RAM (writeback) in sdram_find()
243 * 7c800000 1992MB-2000MB 8MB TSEG (SMRR) in sdram_find()
244 * 7d000000 2000MB-2002MB 2MB GFX GTT (uncached) in sdram_find()
245 * 7d200000 2002MB-2034MB 32MB GFX UMA (uncached) in sdram_find()
246 * 7f200000 2034MB TOLUD in sdram_find()
247 * 7f800000 2040MB MEBASE in sdram_find()
248 * 7f800000 2040MB-2048MB 8MB ME UMA (uncached) in sdram_find()
249 * 80000000 2048MB TOM in sdram_find()
250 * 100000000 4096MB-4102MB 6MB RAM (writeback) in sdram_find()
252 * Total Memory 4GB example: in sdram_find()
[all …]
/openbmc/u-boot/board/freescale/ls1046ardb/
H A DREADME16 - SERDES1 Connections, 4 lanes supporting:
21 - SERDES2 Connections, 4 lanes supporting:
29 - One 512 MB NAND flash with ECC support
34 - DSPI: 64 MB high-speed flash Memory for boot code and storage (up to 108MHz)
35 - 4 I2C controllers
37 - Two 4-pin serial ports at up to 115.2 Kbit/s
44 0x00_0000_0000 - 0x00_000F_FFFF Secure Boot ROM 1MB
45 0x00_0100_0000 - 0x00_0FFF_FFFF CCSRBAR 240MB
48 0x00_2000_0000 - 0x00_20FF_FFFF DCSR 16MB
50 0x00_7FB0_0000 - 0x00_7FB0_0FFF IFC - CPLD 4KB
[all …]
/openbmc/u-boot/doc/
H A DREADME.b4860qds52 - Each supports up to 4 lanes and a total of up to 8 lanes
65 - DDRC1: Ten separate DDR3 parts of 16-bit to support 72-bit (ECC) at 1866MT/s, ECC, 4 GB
111 4. 2X 4 lane serdes
136 SW3 [1:4] = 0001
140 SW3 [1:4] = 1000.
161 SW3 [1:4] = 0001
165 SW3 [1:4] = 1000.
172 0xF_FFDF_1000 0xF_FFFF_FFFF Free 2 MB
173 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4 KB
174 0xF_FF81_0000 0xF_FFDE_FFFF Free 5 MB
[all …]
/openbmc/linux/arch/microblaze/kernel/
H A Dhead.S51 .align 4
99 ori r3, r0, (0x10000 - 4)
103 addik r11, r11, 4 /* increment counting */
105 addik r3, r3, -4 /* descrement loop */
135 ori r3, r0, (LMB_SIZE - 4)
139 addik r11, r11, 4 /* increment counting */
141 addik r3, r3, -4 /* descrement loop */
163 bri 4
184 bgei r11, GT16 /* size is greater than 16MB */
186 bgei r11, GT8 /* size is greater than 8MB */
[all …]
/openbmc/linux/sound/isa/gus/
H A Dgus_io.c17 mb(); in snd_gf1_delay()
36 mb(); in __snd_gf1_ctrl_stop()
38 mb(); in __snd_gf1_ctrl_stop()
40 mb(); in __snd_gf1_ctrl_stop()
42 mb(); in __snd_gf1_ctrl_stop()
50 mb(); in __snd_gf1_write8()
52 mb(); in __snd_gf1_write8()
59 mb(); in __snd_gf1_look8()
67 mb(); in __snd_gf1_write16()
69 mb(); in __snd_gf1_write16()
[all …]
/openbmc/linux/Documentation/arch/x86/x86_64/
H A Dmm.rst7 Complete virtual memory map with 4-level page tables
20 from TB to GB and then MB/KB.
57 fffffc0000000000 | -4 TB | fffffdffffffffff | 2 TB | ... unused hole
64 ffffffff00000000 | -4 GB | ffffffff7fffffff | 2 GB | ... unused hole
65 …ffffffff80000000 | -2 GB | ffffffff9fffffff | 512 MB | kernel text mapping, mapped to physic…
66 ffffffff80000000 |-2048 MB | | |
67 ffffffffa0000000 |-1536 MB | fffffffffeffffff | 1520 MB | module mapping space
68 ffffffffff000000 | -16 MB | | |
69 …FIXADDR_START | ~-11 MB | ffffffffff5fffff | ~0.5 MB | kernel-internal fixmap range, variable s…
70 ffffffffff600000 | -10 MB | ffffffffff600fff | 4 kB | legacy vsyscall ABI
[all …]
/openbmc/linux/Documentation/devicetree/bindings/pci/
H A Dv3-v360epc-pci.txt11 second the configuration area register space, 16MB
18 each be exactly 256MB (0x10000000) in size.
22 be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB,
23 64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked
50 0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */
59 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */
64 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */
69 0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */
74 0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */
H A Dfaraday,ftpci100.yaml39 <0x4800 0 0 4 &pci_intc 3>,
43 <0x5000 0 0 4 &pci_intc 0>,
47 <0x5800 0 0 4 &pci_intc 1>,
51 <0x6000 0 0 4 &pci_intc 2>;
84 be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB,
85 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as
154 <0x4800 0 0 4 &pci_intc 3>,
158 <0x5000 0 0 4 &pci_intc 0>,
162 <0x5800 0 0 4 &pci_intc 1>,
166 <0x6000 0 0 4 &pci_intc 0>;
/openbmc/u-boot/board/freescale/t208xqds/
H A DREADME13 - 2MB L2 cache and 512KB CoreNet platform cache (CPC)
31 - Four 2-pin UARTs or two 4-pin UARTs
41 10G Ethernet numbers: 4 2
55 - Two DDR3 DIMMs up to 4GB, Dual rank @ 2133MT/s and ECC support
67 - 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA
69 - Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
83 - Dual 4-pins UART serial ports
114 1/2/5/6/9/10 are available for 1G-KX, MAC 3/4 run in RGMII mode. To set a
124 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
126 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
[all …]
/openbmc/linux/drivers/power/supply/
H A Dipaq_micro_battery.c51 struct micro_battery *mb = container_of(work, in micro_battery_work() local
61 ipaq_micro_tx_msg_sync(mb->micro, &msg_battery); in micro_battery_work()
62 if (msg_battery.rx_len < 4) in micro_battery_work()
72 * byte 4: flags in micro_battery_work()
75 mb->ac = msg_battery.rx_data[0]; in micro_battery_work()
76 mb->chemistry = msg_battery.rx_data[1]; in micro_battery_work()
77 mb->voltage = ((((unsigned short)msg_battery.rx_data[3] << 8) + in micro_battery_work()
79 mb->flag = msg_battery.rx_data[4]; in micro_battery_work()
85 ipaq_micro_tx_msg_sync(mb->micro, &msg_sensor); in micro_battery_work()
86 mb->temperature = msg_sensor.rx_data[1] << 8 | msg_sensor.rx_data[0]; in micro_battery_work()
[all …]
/openbmc/u-boot/board/freescale/t1040qds/
H A DREADME66 - NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB
85 - Supporting SD slots for: SD, SDHC (1x, 4x, 8x) and/or MMC
99 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - FPGA 4KB
101 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
102 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
106 0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB
107 0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB
108 0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB
109 0xF_E000_0000 0xF_E7FF_FFFF Promjet 128MB
110 0xF_0000_0000 0xF_003F_FFFF DCSR 4MB
[all …]
/openbmc/openbmc/meta-openembedded/meta-oe/recipes-support/hddtemp/hddtemp/
H A Dhddtemp.db70 "FUJITSU MHT2030AC" 194 C "Fujitsu Mobile 30GB, 2MB, 4200RPM (automotive)"
79 "FUJITSU MHU2100AT" 194 C "Fujitsu MHU2100AT 100GB, 8MB (4200RPM)"
110 "HDS722516VLAT[28]0" 194 C "Hitachi Deskstar 7K250 160GB 2/8MB cache"
111 "HDS722525VLAT80" 194 C "Hitachi Deskstar 7K250 200/250GB, 7200RPM, 8MB, Parallel-ATA"
113 "HDS722540VLAT20" 194 C "Hitachi Deskstar 7K250, 40GB, 7200RPM, 2MB cache"
115 "HDS724040KLSA80" 194 C "Hitachi Deskstar 7K250 400GB, 7200RPM, 8MB, Serial-ATA"
118 "HDS722525VLSA80" 194 C "Hitachi Deskstar 7K250 250GB, 7200RPM, 8MB, SATA"
125 "HDT7225(16|25)DLAT80" 194 C "Hitachi Deskstar T7K250 series, 7200RPM, 8MB, PATA"
128 "HDT725050VLA360" 194 C "Hitachi Deskstar T7K500 500GB, 7200RPM, 16MB, SATA II"
133 "HTS424040M9AT00" 194 C "Hitachi Travelstar 4K40 40GB 2MB cache (4200RPM)"
[all …]
/openbmc/u-boot/board/freescale/t208xrdb/
H A DREADME13 - 2MB L2 cache and 512KB CoreNet platform cache (CPC)
31 - Four 2-pin UARTs or two 4-pin UARTs
41 10G Ethernet numbers: 4 2
63 - Supports 72bit 4GB DDR3-LP SODIMM
69 - NOR: 128MB 16-bit NOR Flash
80 - On-board 64MB SPI flash
89 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
91 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
92 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
96 0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB
[all …]
/openbmc/linux/arch/mips/include/asm/dec/
H A Dkn05.h5 * DECstation/DECsystem 5000/260 (4max+ or KN05), 5000/150 (4min
6 * or KN04-BA), Personal DECstation/DECsystem 5000/50 (4maxine or
7 * KN04-CA) and DECsystem 5900/260 (KN05) R4k CPU card MB ASIC
23 * The oncard MB (Memory Buffer) ASIC provides an additional address
34 #define KN4K_MB_INT (4*IOASIC_SLOT_SIZE) /* MB interrupt register */
35 #define KN4K_MB_EA (5*IOASIC_SLOT_SIZE) /* MB error address? */
36 #define KN4K_MB_EC (6*IOASIC_SLOT_SIZE) /* MB error ??? */
37 #define KN4K_MB_CSR (7*IOASIC_SLOT_SIZE) /* MB control & status */
48 * MB ASIC interrupt bits.
50 #define KN4K_MB_INR_MB 4 /* ??? */
[all …]
/openbmc/linux/arch/parisc/include/asm/
H A Dassembly.h22 #define REG_SZ 4
62 #define LDREGM ldd,mb
314 fldd,mb -8(\regs), %fr30
315 fldd,mb -8(\regs), %fr29
316 fldd,mb -8(\regs), %fr28
317 fldd,mb -8(\regs), %fr27
318 fldd,mb -8(\regs), %fr26
319 fldd,mb -8(\regs), %fr25
320 fldd,mb -8(\regs), %fr24
321 fldd,mb -8(\regs), %fr23
[all …]
/openbmc/linux/arch/arc/plat-axs10x/
H A Daxs10x.c44 * | snps,dw-apb-intc (MB)| in axs10x_enable_gpio_intc_wire()
55 * DT hardware topology - connect MB intc directly to cpu intc in axs10x_enable_gpio_intc_wire()
78 unsigned int pad:11, y:12, m:4, d:5; in axs10x_print_board_ver()
80 unsigned int d:5, m:4, y:12, pad:11; in axs10x_print_board_ver()
94 char mb[32]; in axs10x_early_init() local
104 scnprintf(mb, 32, "MainBoard v%d", mb_rev); in axs10x_early_init()
105 axs10x_print_board_ver(CREG_MB_VER, mb); in axs10x_early_init()
121 * Each AXI master has a 4GB memory map specified as 16 apertures of 256MB, each
122 * of which maps to a corresponding 256MB aperture in Target slave memory map.
127 * Access from cpu to MB controllers such as GMAC is setup using AXI Tunnel:
[all …]
/openbmc/openbmc/meta-ampere/meta-jefferson/recipes-ampere/platform/ampere-utils/
H A Dampere_firmware_upgrade.sh7 # dev: 1 for CIO FRU (default), 2 for BMC FRU, 3 for MB-1 FRU, 4 for MB-2 FRU
65 if [ -f /sys/bus/i2c/devices/4-0050/eeprom ]; then
66 FRU_DEVICE="/sys/bus/i2c/devices/4-0050/eeprom"
74 echo "Flash MB-1 FRU with image $IMAGE at $FRU_DEVICE"
75 elif [[ $FRU_DEV == 4 ]]; then
77 echo "Flash MB-2 FRU with image $IMAGE at $FRU_DEVICE"
80 echo "MB-1 FRU (3), MB-2 FRU (4),"
93 echo "Flashing MB CPLD"
118 echo " dev: 1 - CIO FRU (default), 2 - BMC FRU, 3 - MB-1 FRU, 4 - MB-2 FRU"
/openbmc/u-boot/test/py/tests/test_fs/
H A Dtest_basic.py46 # 1MB is 0x0010 0000
80 Test Case 4 - load a small file, 1MB
83 with u_boot_console.log.section('Test Case 4 - load (small)'):
84 # Test Case 4a - Read full 1MB of small file
91 # Test Case 4b - Read full 1MB of small file
99 Test Case 5 - load, reading first 1MB of 3GB file
102 with u_boot_console.log.section('Test Case 5 - load (first 1MB)'):
103 # Test Case 5a - First 1MB of big file
110 # Test Case 5b - First 1MB of big file
118 Test Case 6 - load, reading last 1MB of 3GB file
[all …]

12345678910>>...45