Home
last modified time | relevance | path

Searched +full:1200 +full:khz (Results 1 – 25 of 79) sorted by relevance

1234

/openbmc/linux/Documentation/fb/
H A Dviafb.modes14 # Scan Frequency 31.469 kHz 59.94 Hz
29 # D: 25.175 MHz, H: 31.469 kHz, V: 59.94 Hz
32 # D: 24.823 MHz, H: 39.780 kHz, V: 60.00 Hz
39 # Scan Frequency 37.500 kHz 75.00 Hz
53 # D: 31.50 MHz, H: 37.500 kHz, V: 75.00 Hz
60 # Scan Frequency 43.269 kHz 85.00 Hz
74 # D: 36.000 MHz, H: 43.269 kHz, V: 85.00 Hz
81 # Scan Frequency 50.900 kHz 100.00 Hz
95 # D: 43.163 MHz, H: 50.900 kHz, V: 100.00 Hz
102 # Scan Frequency 61.800 kHz 120.00 Hz
[all …]
/openbmc/linux/drivers/video/fbdev/core/
H A Dmodedb.c38 /* 640x400 @ 70 Hz, 31.5 kHz hsync */
42 /* 640x480 @ 60 Hz, 31.5 kHz hsync */
46 /* 800x600 @ 56 Hz, 35.15 kHz hsync */
50 /* 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync */
54 /* 640x400 @ 85 Hz, 37.86 kHz hsync */
58 /* 640x480 @ 72 Hz, 36.5 kHz hsync */
62 /* 640x480 @ 75 Hz, 37.50 kHz hsync */
66 /* 800x600 @ 60 Hz, 37.8 kHz hsync */
71 /* 640x480 @ 85 Hz, 43.27 kHz hsync */
75 /* 1152x864 @ 89 Hz interlaced, 44 kHz hsync */
[all …]
/openbmc/linux/Documentation/devicetree/bindings/regulator/
H A Drichtek,rt6245-regulator.yaml63 Buck switch frequency selection. Each respective value means 400KHz,
64 800KHz, 1200KHz. If this property is missing then keep in chip default.
/openbmc/linux/drivers/cpufreq/
H A Dspeedstep-centrino.c67 unsigned max_freq; /* max clock in kHz */
137 OP(1200, 1180),
147 OP(1200, 1356),
158 OP(1200, 1436),
169 OP(1200, 1356),
181 OP(1200, 1276),
193 OP(1200, 1228),
215 BANIAS(1200),
292 * Extract clock in kHz from PERF_CTL value in extract_clock()
322 /* Return the current CPU frequency in kHz */
H A Dpowernow-k7.c73 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
377 * get a KHz value (e.g. 1266000). However, powernow-k7 works in powernow_acpi_init()
378 * with true KHz values (e.g. 1266768). To ensure that all in powernow_acpi_init()
381 * to ensure that perflib's computed KHz value is greater than in powernow_acpi_init()
382 * or equal to powernow's KHz value. in powernow_acpi_init()
527 * a multiple of 100000/3 khz, then we compute sgtc according
H A Dspeedstep-lib.c31 * GET PROCESSOR CORE SPEED IN KHZ *
218 pr_debug("P4 - FSB %u kHz; Multiplier %u; Speed %u kHz\n", in pentium4_get_frequency()
450 *transition_latency *= 1200; in speedstep_get_freqs()
/openbmc/linux/tools/edid/
H A D1600x1200.S26 #define CLOCK 162000 /* kHz */
28 #define YPIX 1200
/openbmc/linux/sound/soc/codecs/
H A Dwm8985.c224 static const DECLARE_TLV_DB_SCALE(alc_min_tlv, -1200, 600, 0);
227 static const DECLARE_TLV_DB_SCALE(pga_vol_tlv, -1200, 75, 0);
228 static const DECLARE_TLV_DB_SCALE(boost_tlv, -1200, 300, 1);
229 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
259 "650Hz", "850Hz", "1.1kHz", "1.4kHz"
265 "1.8kHz", "2.4kHz", "3.2kHz", "4.1kHz"
270 "5.3kHz", "6.9kHz", "9kHz", "11.7kHz"
H A Dwm8983.c134 static const DECLARE_TLV_DB_SCALE(alc_min_tlv, -1200, 600, 0);
137 static const DECLARE_TLV_DB_SCALE(pga_vol_tlv, -1200, 75, 0);
138 static const DECLARE_TLV_DB_SCALE(boost_tlv, -1200, 300, 1);
139 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
169 "650Hz", "850Hz", "1.1kHz", "1.4kHz"
174 "1.8kHz", "2.4kHz", "3.2kHz", "4.1kHz"
179 "5.3kHz", "6.9kHz", "9kHz", "11.7kHz"
H A Dwm8974.c56 static const char *wm8974_deemp[] = {"None", "32kHz", "44.1kHz", "48kHz" };
61 static const char *wm8974_eq3[] = {"650Hz", "850Hz", "1.1kHz", "1.4kHz" };
62 static const char *wm8974_eq4[] = {"1.8kHz", "2.4kHz", "3.2kHz", "4.1kHz" };
63 static const char *wm8974_eq5[] = {"5.3kHz", "6.9kHz", "9kHz", "11.7kHz" };
92 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
93 static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1200, 75, 0);
H A Dwm8978.c111 static const char *wm8978_eq3[] = {"650Hz", "850Hz", "1.1kHz", "1.4kHz"};
112 static const char *wm8978_eq4[] = {"1.8kHz", "2.4kHz", "3.2kHz", "4.1kHz"};
113 static const char *wm8978_eq5[] = {"5.3kHz", "6.9kHz", "9kHz", "11.7kHz"};
134 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
135 static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1200, 75, 0);
903 /* Also supports 12kHz */
H A Dmax9860.c128 static const DECLARE_TLV_DB_SCALE(adc_tlv, -1200, 100, 0);
167 "Elliptical HP 217Hz notch (16kHz)",
168 "Butterworth HP 500Hz (16kHz)",
169 "Elliptical HP 217Hz notch (8kHz)",
170 "Butterworth HP 500Hz (8kHz)",
171 "Butterworth HP 200Hz (48kHz)"
393 * 65536 * 96 * 48kHz / 10MHz -> 30199 in max9860_hw_params()
395 * 65536 * 96 * 8kHz / 20MHz -> 2517 in max9860_hw_params()
H A Dwm8753.c155 {"130Hz @ 48kHz", "200Hz @ 48kHz", "100Hz @ 16kHz", "400Hz @ 48kHz",
156 "100Hz @ 8kHz", "200Hz @ 8kHz"};
157 static const char *wm8753_treble[] = {"8kHz", "4kHz"};
161 static const char *wm8753_3d_uc[] = {"2.2kHz", "1.5kHz"};
163 static const char *wm8753_deemp[] = {"None", "32kHz", "44.1kHz", "48kHz"};
182 static const char *wm8753_adc_hp[] = {"3.4Hz @ 48kHz", "82Hz @ 16k",
183 "82Hz @ 8kHz", "170Hz @ 8kHz"};
265 static const DECLARE_TLV_DB_SCALE(mic_preamp_tlv, 1200, 600, 0);
274 static const DECLARE_TLV_DB_SCALE(voice_mix_tlv, -1200, 300, 0);
H A Dnau8810.c242 "None", "32kHz", "44.1kHz", "48kHz" };
261 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
262 static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1200, 75, 0);
H A Dwm9081.c243 0, 0, TLV_DB_SCALE_ITEM(1200, 0, 0),
248 static const DECLARE_TLV_DB_SCALE(drc_qr_tlv, 1200, 600, 0);
251 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
319 "32kHz",
320 "44.1kHz",
321 "48kHz",
H A Dcs42l52.c148 3, 7, TLV_DB_SCALE_ITEM(-1200, 300, 0)
248 "5 kHz", "7 kHz", "10 kHz", " 15 kHz"
897 1043, 1200, 1333, 1412, 1600, 1714, 2000, 2182
/openbmc/u-boot/arch/arm/mach-omap2/omap4/
H A Dhw_data.c65 * dpll locked at 1200 MHz - MPU clk at 600 MHz
269 .core.value[OPP_NOM] = 1200,
273 .mm.value[OPP_NOM] = 1200,
283 .core.value[OPP_NOM] = 1200,
287 .mm.value[OPP_NOM] = 1200,
297 .core.value[OPP_NOM] = 1200,
301 .mm.value[OPP_NOM] = 1200,
376 /* Select 32KHz clock as the source of GPTIMER1 */ in enable_basic_clocks()
384 /* Enable 32 KHz clock for USB PHY */ in enable_basic_clocks()
/openbmc/linux/arch/arm64/boot/dts/rockchip/
H A Drk3399-nanopc-t4.dts59 * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels
60 * work out to 0, ~1200, ~3000, and 5000RPM respectively.
/openbmc/openbmc/meta-nuvoton/recipes-nuvoton/program-edid/program-edid/
H A Dedid.json44 "y": 1200
112 "Horizontal rate (kHz)": {
/openbmc/linux/drivers/gpu/drm/amd/pm/powerplay/hwmgr/
H A Dsmu10_hwmgr.h288 uint32_t gfx_max_freq_limit; /* in 10Khz*/
319 #define SMU10_UMD_PSTATE_PEAK_FCLK 1200
/openbmc/linux/Documentation/devicetree/bindings/leds/backlight/
H A Dqcom-wled.yaml84 kHz; switching frequency.
86 enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
/openbmc/linux/drivers/comedi/
H A DKconfig23 running at 10 kHz has of 2-4 seconds of buffer.
32 channels running at 100 kHz has 2-4 seconds of buffer.
503 Lab-PC-1200, Lab-PC-1200AI, Lab-PC+.
504 Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
1033 tristate "NI Lab-PC PCI-1200 support"
1036 Enable support for National Instruments Lab-PC PCI-1200.
1153 tristate "NI DAQCard-1200 PCMCIA support"
1156 Enable support for the National Instruments PCMCIA DAQCard-1200
/openbmc/linux/drivers/clk/spear/
H A Dspear1340_clock.c172 {.mode = 0, .m = 0x96, .n = 0x06, .p = 0x0}, /* vco 1200, pll 1200 MHz */
350 {.xscale = 1, .yscale = 12, .eq = 0}, /* 2.048 MHz, smp freq = 8Khz */
351 {.xscale = 11, .yscale = 96, .eq = 0}, /* 2.816 MHz, smp freq = 11Khz */
352 {.xscale = 1, .yscale = 6, .eq = 0}, /* 4.096 MHz, smp freq = 16Khz */
353 {.xscale = 11, .yscale = 48, .eq = 0}, /* 5.632 MHz, smp freq = 22Khz */
356 * with parent clk = 49.152, freq gen is 8.192 MHz, smp freq = 32Khz
357 * with parent clk = 12.288, freq gen is 2.048 MHz, smp freq = 8Khz
362 {.xscale = 17, .yscale = 37, .eq = 0}, /* 11.289 MHz, smp freq = 44Khz*/
363 {.xscale = 1, .yscale = 2, .eq = 0}, /* 12.288 MHz, smp freq = 48Khz*/
459 /* clock derived from 32 KHz osc clk */ in spear1340_clk_init()
/openbmc/linux/sound/firewire/fireworks/
H A Dfireworks_stream.c53 // AudioFire9 always reports wrong dbs. Onyx 1200F with the latest firmware (v4.6.0) in init_stream()
54 // also report wrong dbs at 88.2 kHz or greater. in init_stream()
/openbmc/linux/drivers/gpu/drm/loongson/
H A Dlsdc_output_7a2000.c61 num = drm_add_modes_noedid(connector, 1920, 1200); in ls7a2000_connector_get_modes()
405 * | Fin (kHZ) | M | IDF | LF | ODF | Fout(Mhz) |
460 drm_dbg(ddev, "Fin of HDMI-%u: %d kHz\n", index, fin); in ls7a2000_hdmi_phy_pll_config()

1234