xref: /openbmc/linux/drivers/comedi/Kconfig (revision 98a15816)
1# SPDX-License-Identifier: GPL-2.0
2menuconfig COMEDI
3	tristate "Data acquisition support (comedi)"
4	help
5	  Enable support for a wide range of data acquisition devices
6	  for Linux.
7
8if COMEDI
9
10config COMEDI_DEBUG
11	bool "Comedi debugging"
12	help
13	  This is an option for use by developers; most people should
14	  say N here. This enables comedi core and driver debugging.
15
16config COMEDI_DEFAULT_BUF_SIZE_KB
17	int "Comedi default initial asynchronous buffer size in KiB"
18	default "2048"
19	help
20	  This is the default asynchronous buffer size which is used for
21	  commands running in the background in kernel space.  This
22	  defaults to 2048 KiB of memory so that a 16 channel card
23	  running at 10 kHz has of 2-4 seconds of buffer.
24
25config COMEDI_DEFAULT_BUF_MAXSIZE_KB
26	int "Comedi default maximum asynchronous buffer size in KiB"
27	default "20480"
28	help
29	  This is the default maximum asynchronous buffer size which can
30	  be requested by a userspace program without root privileges.
31	  This is set to 20480 KiB so that a fast I/O card with 16
32	  channels running at 100 kHz has 2-4 seconds of buffer.
33
34menuconfig COMEDI_MISC_DRIVERS
35	bool "Comedi misc drivers"
36	help
37	  Enable comedi misc drivers to be built
38
39	  Note that the answer to this question won't directly affect the
40	  kernel: saying N will just cause the configurator to skip all
41	  the questions about misc non-hardware comedi drivers.
42
43if COMEDI_MISC_DRIVERS
44
45config COMEDI_BOND
46	tristate "Comedi device bonding support"
47	select COMEDI_KCOMEDILIB
48	help
49	  Enable support for a driver to 'bond' (merge) multiple subdevices
50	  from multiple devices together as one.
51
52	  Currently, it only handles digital I/O subdevices.
53
54	  To compile this driver as a module, choose M here: the module will be
55	  called comedi_bond.
56
57config COMEDI_TEST
58	tristate "Fake waveform generator support"
59	help
60	  Enable support for the fake waveform generator.
61	  This driver is mainly for testing purposes, but can also be used to
62	  generate sample waveforms on systems that don't have data acquisition
63	  hardware.
64
65	  To compile this driver as a module, choose M here: the module will be
66	  called comedi_test.
67
68config COMEDI_PARPORT
69	tristate "Parallel port support"
70	help
71	  Enable support for the standard parallel port.
72	  A cheap and easy way to get a few more digital I/O lines. Steal
73	  additional parallel ports from old computers or your neighbors'
74	  computers.
75
76	  To compile this driver as a module, choose M here: the module will be
77	  called comedi_parport.
78
79config COMEDI_SSV_DNP
80	tristate "SSV Embedded Systems DIL/Net-PC support"
81	depends on X86_32 || COMPILE_TEST
82	help
83	  Enable support for SSV Embedded Systems DIL/Net-PC
84
85	  To compile this driver as a module, choose M here: the module will be
86	  called ssv_dnp.
87
88endif # COMEDI_MISC_DRIVERS
89
90menuconfig COMEDI_ISA_DRIVERS
91	bool "Comedi ISA and PC/104 drivers"
92	help
93	  Enable comedi ISA and PC/104 drivers to be built
94
95	  Note that the answer to this question won't directly affect the
96	  kernel: saying N will just cause the configurator to skip all
97	  the questions about ISA and PC/104 comedi drivers.
98
99if COMEDI_ISA_DRIVERS
100
101config COMEDI_PCL711
102	tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
103	select COMEDI_8254
104	help
105	  Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
106
107	  To compile this driver as a module, choose M here: the module will be
108	  called pcl711.
109
110config COMEDI_PCL724
111	tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
112	select COMEDI_8255
113	help
114	  Enable support for ISA and PC/104 based 8255 digital i/o boards. This
115	  driver provides a legacy comedi driver wrapper for the generic 8255
116	  support driver.
117
118	  Supported boards include:
119	    Advantech PCL-724            24 channels
120	    Advantech PCL-722            144 (or 96) channels
121	    Advantech PCL-731            48 channels
122	    ADlink ACL-7122              144 (or 96) channels
123	    ADlink ACL-7124              24 channels
124	    ADlink PET-48DIO             48 channels
125	    WinSystems PCM-IO48          48 channels (PC/104)
126	    Diamond Systems ONYX-MM-DIO  48 channels (PC/104)
127
128	  To compile this driver as a module, choose M here: the module will be
129	  called pcl724.
130
131config COMEDI_PCL726
132	tristate "Advantech PCL-726 and compatible ISA card support"
133	help
134	  Enable support for Advantech PCL-726 and compatible ISA cards.
135
136	  To compile this driver as a module, choose M here: the module will be
137	  called pcl726.
138
139config COMEDI_PCL730
140	tristate "Simple Digital I/O board support (8-bit ports)"
141	help
142	  Enable support for various simple ISA or PC/104 Digital I/O boards.
143	  These boards all use 8-bit I/O ports.
144
145	  Advantech PCL-730             iso - 16 in/16 out  ttl - 16 in/16 out
146	  ICP ISO-730                   iso - 16 in/16 out  ttl - 16 in/16 out
147	  ADlink ACL-7130               iso - 16 in/16 out  ttl - 16 in/16 out
148	  Advantech PCM-3730            iso - 8 in/8 out    ttl - 16 in/16 out
149	  Advantech PCL-725             iso - 8 in/8 out
150	  ICP P8R8-DIO                  iso - 8 in/8 out
151	  ADlink ACL-7225b              iso - 16 in/16 out
152	  ICP P16R16-DIO                iso - 16 in/16 out
153	  Advantech PCL-733             iso - 32 in
154	  Advantech PCL-734             iso - 32 out
155	  Diamond Systems OPMM-1616-XT  iso - 16 in/16 out
156	  Diamond Systems PEARL-MM-P    iso - 16 out
157	  Diamond Systems IR104-PBF     iso - 20 in/20 out
158
159	  To compile this driver as a module, choose M here: the module will be
160	  called pcl730.
161
162config COMEDI_PCL812
163	tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
164	select COMEDI_ISADMA if ISA_DMA_API
165	select COMEDI_8254
166	help
167	  Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
168	  ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
169	  A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
170
171	  To compile this driver as a module, choose M here: the module will be
172	  called pcl812.
173
174config COMEDI_PCL816
175	tristate "Advantech PCL-814 and PCL-816 ISA card support"
176	select COMEDI_ISADMA if ISA_DMA_API
177	select COMEDI_8254
178	help
179	  Enable support for Advantech PCL-814 and PCL-816 ISA cards
180
181	  To compile this driver as a module, choose M here: the module will be
182	  called pcl816.
183
184config COMEDI_PCL818
185	tristate "Advantech PCL-718 and PCL-818 ISA card support"
186	select COMEDI_ISADMA if ISA_DMA_API
187	select COMEDI_8254
188	help
189	  Enable support for Advantech PCL-818 ISA cards
190	  PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
191
192	  To compile this driver as a module, choose M here: the module will be
193	  called pcl818.
194
195config COMEDI_PCM3724
196	tristate "Advantech PCM-3724 PC/104 card support"
197	select COMEDI_8255
198	help
199	  Enable support for Advantech PCM-3724 PC/104 cards.
200
201	  To compile this driver as a module, choose M here: the module will be
202	  called pcm3724.
203
204config COMEDI_AMPLC_DIO200_ISA
205	tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
206	select COMEDI_AMPLC_DIO200
207	help
208	  Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
209	  PC272E ISA DIO boards
210
211	  To compile this driver as a module, choose M here: the module will be
212	  called amplc_dio200.
213
214config COMEDI_AMPLC_PC236_ISA
215	tristate "Amplicon PC36AT DIO board support"
216	select COMEDI_AMPLC_PC236
217	help
218	  Enable support for Amplicon PC36AT ISA DIO board.
219
220	  To compile this driver as a module, choose M here: the module will be
221	  called amplc_pc236.
222
223config COMEDI_AMPLC_PC263_ISA
224	tristate "Amplicon PC263 relay board support"
225	help
226	  Enable support for Amplicon PC263 ISA relay board.  This board has
227	  16 reed relay output channels.
228
229	  To compile this driver as a module, choose M here: the module will be
230	  called amplc_pc263.
231
232config COMEDI_RTI800
233	tristate "Analog Devices RTI-800/815 ISA card support"
234	help
235	  Enable support for Analog Devices RTI-800/815 ISA cards
236
237	  To compile this driver as a module, choose M here: the module will be
238	  called rti800.
239
240config COMEDI_RTI802
241	tristate "Analog Devices RTI-802 ISA card support"
242	help
243	  Enable support for Analog Devices RTI-802 ISA cards
244
245	  To compile this driver as a module, choose M here: the module will be
246	  called rti802.
247
248config COMEDI_DAC02
249	tristate "Keithley Metrabyte DAC02 compatible ISA card support"
250	help
251	  Enable support for Keithley Metrabyte DAC02 compatible ISA cards.
252
253	  To compile this driver as a module, choose M here: the module will be
254	  called dac02.
255
256config COMEDI_DAS16M1
257	tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
258	select COMEDI_8254
259	select COMEDI_8255
260	help
261	  Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
262
263	  To compile this driver as a module, choose M here: the module will be
264	  called das16m1.
265
266config COMEDI_DAS08_ISA
267	tristate "DAS-08 compatible ISA and PC/104 card support"
268	select COMEDI_DAS08
269	help
270	  Enable support for Keithley Metrabyte/ComputerBoards DAS08
271	  and compatible ISA and PC/104 cards:
272	  Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
273	  DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
274	  DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16.
275
276	  To compile this driver as a module, choose M here: the module will be
277	  called das08_isa.
278
279config COMEDI_DAS16
280	tristate "DAS-16 compatible ISA and PC/104 card support"
281	select COMEDI_ISADMA if ISA_DMA_API
282	select COMEDI_8254
283	select COMEDI_8255
284	help
285	  Enable support for Keithley Metrabyte/ComputerBoards DAS16
286	  and compatible ISA and PC/104 cards:
287	  Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
288	  DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
289	  ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
290	  PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
291	  CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
292	  CIO-DAS1602/16, CIO-DAS16/330
293
294	  To compile this driver as a module, choose M here: the module will be
295	  called das16.
296
297config COMEDI_DAS800
298	tristate "DAS800 and compatible ISA card support"
299	select COMEDI_8254
300	help
301	  Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
302	  Keithley Metrabyte DAS-800, DAS-801, DAS-802
303	  Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
304	  CIO-DAS802/16
305
306	  To compile this driver as a module, choose M here: the module will be
307	  called das800.
308
309config COMEDI_DAS1800
310	tristate "DAS1800 and compatible ISA card support"
311	select COMEDI_ISADMA if ISA_DMA_API
312	select COMEDI_8254
313	help
314	  Enable support for DAS1800 and compatible ISA cards
315	  Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
316	  DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
317	  DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
318	  DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
319	  DAS-1802AO
320
321	  To compile this driver as a module, choose M here: the module will be
322	  called das1800.
323
324config COMEDI_DAS6402
325	tristate "DAS6402 and compatible ISA card support"
326	select COMEDI_8254
327	help
328	  Enable support for DAS6402 and compatible ISA cards
329	  Computerboards, Keithley Metrabyte DAS6402 and compatibles
330
331	  To compile this driver as a module, choose M here: the module will be
332	  called das6402.
333
334config COMEDI_DT2801
335	tristate "Data Translation DT2801 ISA card support"
336	help
337	  Enable support for Data Translation DT2801 ISA cards
338
339	  To compile this driver as a module, choose M here: the module will be
340	  called dt2801.
341
342config COMEDI_DT2811
343	tristate "Data Translation DT2811 ISA card support"
344	help
345	  Enable support for Data Translation DT2811 ISA cards
346
347	  To compile this driver as a module, choose M here: the module will be
348	  called dt2811.
349
350config COMEDI_DT2814
351	tristate "Data Translation DT2814 ISA card support"
352	help
353	  Enable support for Data Translation DT2814 ISA cards
354
355	  To compile this driver as a module, choose M here: the module will be
356	  called dt2814.
357
358config COMEDI_DT2815
359	tristate "Data Translation DT2815 ISA card support"
360	help
361	  Enable support for Data Translation DT2815 ISA cards
362
363	  To compile this driver as a module, choose M here: the module will be
364	  called dt2815.
365
366config COMEDI_DT2817
367	tristate "Data Translation DT2817 ISA card support"
368	help
369	  Enable support for Data Translation DT2817 ISA cards
370
371	  To compile this driver as a module, choose M here: the module will be
372	  called dt2817.
373
374config COMEDI_DT282X
375	tristate "Data Translation DT2821 series and DT-EZ ISA card support"
376	select COMEDI_ISADMA if ISA_DMA_API
377	help
378	  Enable support for Data Translation DT2821 series including DT-EZ
379	  DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
380	  DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
381	  DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
382
383	  To compile this driver as a module, choose M here: the module will be
384	  called dt282x.
385
386config COMEDI_DMM32AT
387	tristate "Diamond Systems MM-32-AT PC/104 board support"
388	select COMEDI_8255
389	help
390	  Enable support for Diamond Systems MM-32-AT PC/104 boards
391
392	  To compile this driver as a module, choose M here: the module will be
393	  called dmm32at.
394
395config COMEDI_FL512
396	tristate "FL512 ISA card support"
397	help
398	  Enable support for FL512 ISA card
399
400	  To compile this driver as a module, choose M here: the module will be
401	  called fl512.
402
403config COMEDI_AIO_AIO12_8
404	tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
405	select COMEDI_8254
406	select COMEDI_8255
407	help
408	  Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
409
410	  To compile this driver as a module, choose M here: the module will be
411	  called aio_aio12_8.
412
413config COMEDI_AIO_IIRO_16
414	tristate "I/O Products PC/104 IIRO16 Board support"
415	help
416	  Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
417	  Input Board
418
419	  To compile this driver as a module, choose M here: the module will be
420	  called aio_iiro_16.
421
422config COMEDI_II_PCI20KC
423	tristate "Intelligent Instruments PCI-20001C carrier support"
424	depends on HAS_IOMEM
425	help
426	  Enable support for Intelligent Instruments PCI-20001C carrier
427	  PCI-20001, PCI-20006 and PCI-20341
428
429	  To compile this driver as a module, choose M here: the module will be
430	  called ii_pci20kc.
431
432config COMEDI_C6XDIGIO
433	tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
434	help
435	  Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
436	  card
437
438	  To compile this driver as a module, choose M here: the module will be
439	  called c6xdigio.
440
441config COMEDI_MPC624
442	tristate "Micro/sys MPC-624 PC/104 board support"
443	help
444	  Enable support for Micro/sys MPC-624 PC/104 board
445
446	  To compile this driver as a module, choose M here: the module will be
447	  called mpc624.
448
449config COMEDI_ADQ12B
450	tristate "MicroAxial ADQ12-B data acquisition and control card support"
451	help
452	  Enable MicroAxial ADQ12-B daq and control card support.
453
454	  To compile this driver as a module, choose M here: the module will be
455	  called adq12b.
456
457config COMEDI_NI_AT_A2150
458	tristate "NI AT-A2150 ISA card support"
459	select COMEDI_ISADMA if ISA_DMA_API
460	select COMEDI_8254
461	help
462	  Enable support for National Instruments AT-A2150 cards
463
464	  To compile this driver as a module, choose M here: the module will be
465	  called ni_at_a2150.
466
467config COMEDI_NI_AT_AO
468	tristate "NI AT-AO-6/10 EISA card support"
469	select COMEDI_8254
470	help
471	  Enable support for National Instruments AT-AO-6/10 cards
472
473	  To compile this driver as a module, choose M here: the module will be
474	  called ni_at_ao.
475
476config COMEDI_NI_ATMIO
477	tristate "NI AT-MIO E series ISA-PNP card support"
478	select COMEDI_8255
479	select COMEDI_NI_TIO
480	help
481	  Enable support for National Instruments AT-MIO E series cards
482	  National Instruments AT-MIO-16E-1 (ni_atmio),
483	  AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
484	  AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
485
486	  To compile this driver as a module, choose M here: the module will be
487	  called ni_atmio.
488
489config COMEDI_NI_ATMIO16D
490	tristate "NI AT-MIO-16/AT-MIO-16D series ISA card support"
491	select COMEDI_8255
492	help
493	  Enable support for National Instruments AT-MIO-16/AT-MIO-16D cards.
494
495	  To compile this driver as a module, choose M here: the module will be
496	  called ni_atmio16d.
497
498config COMEDI_NI_LABPC_ISA
499	tristate "NI Lab-PC and compatibles ISA support"
500	select COMEDI_NI_LABPC
501	help
502	  Enable support for National Instruments Lab-PC and compatibles
503	  Lab-PC-1200, Lab-PC-1200AI, Lab-PC+.
504	  Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
505	  not yet been added to the driver.
506
507	  To compile this driver as a module, choose M here: the module will be
508	  called ni_labpc.
509
510config COMEDI_PCMAD
511	tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
512	help
513	  Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
514
515	  To compile this driver as a module, choose M here: the module will be
516	  called pcmad.
517
518config COMEDI_PCMDA12
519	tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
520	help
521	  Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
522	  Note that the board is not ISA-PNP capable and thus needs the I/O
523	  port comedi_config parameter.
524
525	  To compile this driver as a module, choose M here: the module will be
526	  called pcmda12.
527
528config COMEDI_PCMMIO
529	tristate "Winsystems PCM-MIO PC/104 board support"
530	help
531	  Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
532
533	  To compile this driver as a module, choose M here: the module will be
534	  called pcmmio.
535
536config COMEDI_PCMUIO
537	tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
538	help
539	  Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
540
541	  To compile this driver as a module, choose M here: the module will be
542	  called pcmuio.
543
544config COMEDI_MULTIQ3
545	tristate "Quanser Consulting MultiQ-3 ISA card support"
546	help
547	  Enable support for Quanser Consulting MultiQ-3 ISA cards
548
549	  To compile this driver as a module, choose M here: the module will be
550	  called multiq3.
551
552config COMEDI_S526
553	tristate "Sensoray s526 support"
554	help
555	  Enable support for Sensoray s526
556
557	  To compile this driver as a module, choose M here: the module will be
558	  called s526.
559
560endif # COMEDI_ISA_DRIVERS
561
562menuconfig COMEDI_PCI_DRIVERS
563	tristate "Comedi PCI drivers"
564	depends on PCI
565	help
566	  Enable support for comedi PCI drivers.
567
568	  To compile this support as a module, choose M here: the module will
569	  be called comedi_pci.
570
571if COMEDI_PCI_DRIVERS
572
573config COMEDI_8255_PCI
574	tristate "Generic PCI based 8255 digital i/o board support"
575	select COMEDI_8255
576	help
577	  Enable support for PCI based 8255 digital i/o boards. This driver
578	  provides a PCI wrapper around the generic 8255 driver.
579
580	  Supported boards:
581	    ADlink - PCI-7224, PCI-7248, and PCI-7296
582	    Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and
583	                            PCI-DIO96H
584	    National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503,
585	                           PCI-6503B, PCI-6503X, and PXI-6503
586
587	  To compile this driver as a module, choose M here: the module will
588	  be called 8255_pci.
589
590config COMEDI_ADDI_WATCHDOG
591	tristate
592	help
593	  Provides support for the watchdog subdevice found on many ADDI-DATA
594	  boards. This module will be automatically selected when needed. The
595	  module will be called addi_watchdog.
596
597config COMEDI_ADDI_APCI_1032
598	tristate "ADDI-DATA APCI_1032 support"
599	help
600	  Enable support for ADDI-DATA APCI_1032 cards
601
602	  To compile this driver as a module, choose M here: the module will be
603	  called addi_apci_1032.
604
605config COMEDI_ADDI_APCI_1500
606	tristate "ADDI-DATA APCI_1500 support"
607	help
608	  Enable support for ADDI-DATA APCI_1500 cards
609
610	  To compile this driver as a module, choose M here: the module will be
611	  called addi_apci_1500.
612
613config COMEDI_ADDI_APCI_1516
614	tristate "ADDI-DATA APCI-1016/1516/2016 support"
615	select COMEDI_ADDI_WATCHDOG
616	help
617	  Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
618	  These are 16 channel, optically isolated, digital I/O boards. The 1516
619	  and 2016 boards also have a watchdog for resetting the outputs to "0".
620
621	  To compile this driver as a module, choose M here: the module will be
622	  called addi_apci_1516.
623
624config COMEDI_ADDI_APCI_1564
625	tristate "ADDI-DATA APCI_1564 support"
626	select COMEDI_ADDI_WATCHDOG
627	help
628	  Enable support for ADDI-DATA APCI_1564 cards
629
630	  To compile this driver as a module, choose M here: the module will be
631	  called addi_apci_1564.
632
633config COMEDI_ADDI_APCI_16XX
634	tristate "ADDI-DATA APCI_16xx support"
635	help
636	  Enable support for ADDI-DATA APCI_16xx cards
637
638	  To compile this driver as a module, choose M here: the module will be
639	  called addi_apci_16xx.
640
641config COMEDI_ADDI_APCI_2032
642	tristate "ADDI-DATA APCI_2032 support"
643	select COMEDI_ADDI_WATCHDOG
644	help
645	  Enable support for ADDI-DATA APCI_2032 cards
646
647	  To compile this driver as a module, choose M here: the module will be
648	  called addi_apci_2032.
649
650config COMEDI_ADDI_APCI_2200
651	tristate "ADDI-DATA APCI_2200 support"
652	select COMEDI_ADDI_WATCHDOG
653	help
654	  Enable support for ADDI-DATA APCI_2200 cards
655
656	  To compile this driver as a module, choose M here: the module will be
657	  called addi_apci_2200.
658
659config COMEDI_ADDI_APCI_3120
660	tristate "ADDI-DATA APCI_3120/3001 support"
661	depends on HAS_DMA
662	help
663	  Enable support for ADDI-DATA APCI_3120/3001 cards
664
665	  To compile this driver as a module, choose M here: the module will be
666	  called addi_apci_3120.
667
668config COMEDI_ADDI_APCI_3501
669	tristate "ADDI-DATA APCI_3501 support"
670	help
671	  Enable support for ADDI-DATA APCI_3501 cards
672
673	  To compile this driver as a module, choose M here: the module will be
674	  called addi_apci_3501.
675
676config COMEDI_ADDI_APCI_3XXX
677	tristate "ADDI-DATA APCI_3xxx support"
678	help
679	  Enable support for ADDI-DATA APCI_3xxx cards
680
681	  To compile this driver as a module, choose M here: the module will be
682	  called addi_apci_3xxx.
683
684config COMEDI_ADL_PCI6208
685	tristate "ADLink PCI-6208A support"
686	help
687	  Enable support for ADLink PCI-6208A cards
688
689	  To compile this driver as a module, choose M here: the module will be
690	  called adl_pci6208.
691
692config COMEDI_ADL_PCI7X3X
693	tristate "ADLink PCI-723X/743X isolated digital i/o board support"
694	help
695	  Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
696	  Supported boards include the 32-channel PCI-7230 (16 in/16 out),
697	  PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel
698	  PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out).
699
700	  To compile this driver as a module, choose M here: the module will be
701	  called adl_pci7x3x.
702
703config COMEDI_ADL_PCI8164
704	tristate "ADLink PCI-8164 4 Axes Motion Control board support"
705	help
706	  Enable support for ADlink PCI-8164 4 Axes Motion Control board
707
708	  To compile this driver as a module, choose M here: the module will be
709	  called adl_pci8164.
710
711config COMEDI_ADL_PCI9111
712	tristate "ADLink PCI-9111HR support"
713	select COMEDI_8254
714	help
715	  Enable support for ADlink PCI9111 cards
716
717	  To compile this driver as a module, choose M here: the module will be
718	  called adl_pci9111.
719
720config COMEDI_ADL_PCI9118
721	tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
722	depends on HAS_DMA
723	select COMEDI_8254
724	help
725	  Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
726
727	  To compile this driver as a module, choose M here: the module will be
728	  called adl_pci9118.
729
730config COMEDI_ADV_PCI1710
731	tristate "Advantech PCI-171x and PCI-1731 support"
732	select COMEDI_8254
733	help
734	  Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
735	  PCI-1713 and PCI-1731
736
737	  To compile this driver as a module, choose M here: the module will be
738	  called adv_pci1710.
739
740config COMEDI_ADV_PCI1720
741	tristate "Advantech PCI-1720 support"
742	help
743	  Enable support for Advantech PCI-1720 Analog Output board.
744
745	  To compile this driver as a module, choose M here: the module will be
746	  called adv_pci1720.
747
748config COMEDI_ADV_PCI1723
749	tristate "Advantech PCI-1723 support"
750	help
751	  Enable support for Advantech PCI-1723 cards
752
753	  To compile this driver as a module, choose M here: the module will be
754	  called adv_pci1723.
755
756config COMEDI_ADV_PCI1724
757	tristate "Advantech PCI-1724U support"
758	help
759	  Enable support for Advantech PCI-1724U cards.  These are 32-channel
760	  analog output cards with voltage and current loop output ranges and
761	  14-bit resolution.
762
763	  To compile this driver as a module, choose M here: the module will be
764	  called adv_pci1724.
765
766config COMEDI_ADV_PCI1760
767	tristate "Advantech PCI-1760 support"
768	help
769	  Enable support for Advantech PCI-1760 board.
770
771	  To compile this driver as a module, choose M here: the module will be
772	  called adv_pci1760.
773
774config COMEDI_ADV_PCI_DIO
775	tristate "Advantech PCI DIO card support"
776	select COMEDI_8254
777	select COMEDI_8255
778	help
779	  Enable support for Advantech PCI DIO cards
780	  PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
781	  PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756,
782	  PCI-1761 and PCI-1762
783
784	  To compile this driver as a module, choose M here: the module will be
785	  called adv_pci_dio.
786
787config COMEDI_AMPLC_DIO200_PCI
788	tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
789	select COMEDI_AMPLC_DIO200
790	help
791	  Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
792	  and PCIe296 DIO boards.
793
794	  To compile this driver as a module, choose M here: the module will be
795	  called amplc_dio200_pci.
796
797config COMEDI_AMPLC_PC236_PCI
798	tristate "Amplicon PCI236 DIO board support"
799	select COMEDI_AMPLC_PC236
800	help
801	  Enable support for Amplicon PCI236 DIO board.
802
803	  To compile this driver as a module, choose M here: the module will be
804	  called amplc_pci236.
805
806config COMEDI_AMPLC_PC263_PCI
807	tristate "Amplicon PCI263 relay board support"
808	help
809	  Enable support for Amplicon PCI263 relay board.  This is a PCI board
810	  with 16 reed relay output channels.
811
812	  To compile this driver as a module, choose M here: the module will be
813	  called amplc_pci263.
814
815config COMEDI_AMPLC_PCI224
816	tristate "Amplicon PCI224 and PCI234 support"
817	select COMEDI_8254
818	help
819	  Enable support for Amplicon PCI224 and PCI234 AO boards
820
821	  To compile this driver as a module, choose M here: the module will be
822	  called amplc_pci224.
823
824config COMEDI_AMPLC_PCI230
825	tristate "Amplicon PCI230 and PCI260 support"
826	select COMEDI_8254
827	select COMEDI_8255
828	help
829	  Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
830	  boards
831
832	  To compile this driver as a module, choose M here: the module will be
833	  called amplc_pci230.
834
835config COMEDI_CONTEC_PCI_DIO
836	tristate "Contec PIO1616L digital I/O board support"
837	help
838	  Enable support for the Contec PIO1616L digital I/O board
839
840	  To compile this driver as a module, choose M here: the module will be
841	  called contec_pci_dio.
842
843config COMEDI_DAS08_PCI
844	tristate "DAS-08 PCI support"
845	select COMEDI_DAS08
846	help
847	  Enable support for PCI DAS-08 cards.
848
849	  To compile this driver as a module, choose M here: the module will be
850	  called das08_pci.
851
852config COMEDI_DT3000
853	tristate "Data Translation DT3000 series support"
854	help
855	  Enable support for Data Translation DT3000 series
856	  DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
857	  DT3004-200
858
859	  To compile this driver as a module, choose M here: the module will be
860	  called dt3000.
861
862config COMEDI_DYNA_PCI10XX
863	tristate "Dynalog PCI DAQ series support"
864	help
865	  Enable support for Dynalog PCI DAQ series
866	  PCI-1050
867
868	  To compile this driver as a module, choose M here: the module will be
869	  called dyna_pci10xx.
870
871config COMEDI_GSC_HPDI
872	tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
873	help
874	  Enable support for General Standards Corporation high speed parallel
875	  digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
876	  Only receive mode works, transmit not supported.
877
878	  To compile this driver as a module, choose M here: the module will be
879	  called gsc_hpdi.
880
881config COMEDI_MF6X4
882	tristate "Humusoft MF634 and MF624 DAQ Card support"
883	help
884	  This driver supports both Humusoft MF634 and MF624 Data acquisition
885	  cards. The legacy Humusoft MF614 card is not supported.
886
887config COMEDI_ICP_MULTI
888	tristate "Inova ICP_MULTI support"
889	help
890	  Enable support for Inova ICP_MULTI card
891
892	  To compile this driver as a module, choose M here: the module will be
893	  called icp_multi.
894
895config COMEDI_DAQBOARD2000
896	tristate "IOtech DAQboard/2000 support"
897	select COMEDI_8255
898	help
899	  Enable support for the IOtech DAQboard/2000
900
901	  To compile this driver as a module, choose M here: the module will be
902	  called daqboard2000.
903
904config COMEDI_JR3_PCI
905	tristate "JR3/PCI force sensor board support"
906	help
907	  Enable support for JR3/PCI force sensor boards
908
909	  To compile this driver as a module, choose M here: the module will be
910	  called jr3_pci.
911
912config COMEDI_KE_COUNTER
913	tristate "Kolter-Electronic PCI Counter 1 card support"
914	help
915	  Enable support for Kolter-Electronic PCI Counter 1 cards
916
917	  To compile this driver as a module, choose M here: the module will be
918	  called ke_counter.
919
920config COMEDI_CB_PCIDAS64
921	tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
922	select COMEDI_8255
923	help
924	  Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
925	  60xx, and 4020 series with the PLX 9080 PCI controller
926
927	  To compile this driver as a module, choose M here: the module will be
928	  called cb_pcidas64.
929
930config COMEDI_CB_PCIDAS
931	tristate "MeasurementComputing PCI-DAS support"
932	select COMEDI_8254
933	select COMEDI_8255
934	help
935	  Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
936	  AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
937	  PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
938	  and PCI_DAS1002.
939
940	  To compile this driver as a module, choose M here: the module will be
941	  called cb_pcidas.
942
943config COMEDI_CB_PCIDDA
944	tristate "MeasurementComputing PCI-DDA series support"
945	select COMEDI_8255
946	help
947	  Enable support for ComputerBoards/MeasurementComputing PCI-DDA
948	  series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
949	  PCI-DDA04/16 and PCI-DDA02/16
950
951	  To compile this driver as a module, choose M here: the module will be
952	  called cb_pcidda.
953
954config COMEDI_CB_PCIMDAS
955	tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support"
956	select COMEDI_8254
957	select COMEDI_8255
958	help
959	  Enable support for ComputerBoards/MeasurementComputing PCI Migration
960	  series PCIM-DAS1602/16 and PCIe-DAS1602/16.
961
962	  To compile this driver as a module, choose M here: the module will be
963	  called cb_pcimdas.
964
965config COMEDI_CB_PCIMDDA
966	tristate "MeasurementComputing PCIM-DDA06-16 support"
967	select COMEDI_8255
968	help
969	  Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
970
971	  To compile this driver as a module, choose M here: the module will be
972	  called cb_pcimdda.
973
974config COMEDI_ME4000
975	tristate "Meilhaus ME-4000 support"
976	select COMEDI_8254
977	help
978	  Enable support for Meilhaus PCI data acquisition cards
979	  ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
980
981	  To compile this driver as a module, choose M here: the module will be
982	  called me4000.
983
984config COMEDI_ME_DAQ
985	tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
986	help
987	  Enable support for Meilhaus PCI data acquisition cards
988	  ME-2000i, ME-2600i and ME-3000vm1
989
990	  To compile this driver as a module, choose M here: the module will be
991	  called me_daq.
992
993config COMEDI_NI_6527
994	tristate "NI 6527 support"
995	help
996	  Enable support for the National Instruments 6527 PCI card
997
998	  To compile this driver as a module, choose M here: the module will be
999	  called ni_6527.
1000
1001config COMEDI_NI_65XX
1002	tristate "NI 65xx static dio PCI card support"
1003	help
1004	  Enable support for National Instruments 65xx static dio boards.
1005	  Supported devices: National Instruments PCI-6509 (ni_65xx),
1006	  PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
1007	  PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
1008	  PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
1009
1010	  To compile this driver as a module, choose M here: the module will be
1011	  called ni_65xx.
1012
1013config COMEDI_NI_660X
1014	tristate "NI 660x counter/timer PCI card support"
1015	depends on HAS_DMA
1016	select COMEDI_NI_TIOCMD
1017	help
1018	  Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
1019	  PXI-6602, PXI-6608, PCI-6624, and PXI-6624.
1020
1021	  To compile this driver as a module, choose M here: the module will be
1022	  called ni_660x.
1023
1024config COMEDI_NI_670X
1025	tristate "NI 670x PCI card support"
1026	help
1027	  Enable support for National Instruments PCI-6703 and PCI-6704
1028
1029	  To compile this driver as a module, choose M here: the module will be
1030	  called ni_670x.
1031
1032config COMEDI_NI_LABPC_PCI
1033	tristate "NI Lab-PC PCI-1200 support"
1034	select COMEDI_NI_LABPC
1035	help
1036	  Enable support for National Instruments Lab-PC PCI-1200.
1037
1038	  To compile this driver as a module, choose M here: the module will be
1039	  called ni_labpc_pci.
1040
1041config COMEDI_NI_PCIDIO
1042	tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
1043	depends on HAS_DMA
1044	select COMEDI_MITE
1045	select COMEDI_8255
1046	help
1047	  Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1048	  PCI-6533 and PCI-6534
1049
1050	  To compile this driver as a module, choose M here: the module will be
1051	  called ni_pcidio.
1052
1053config COMEDI_NI_PCIMIO
1054	tristate "NI PCI-MIO-E series and M series support"
1055	depends on HAS_DMA
1056	select COMEDI_NI_TIOCMD
1057	select COMEDI_8255
1058	help
1059	  Enable support for National Instruments PCI-MIO-E series and M series
1060	  (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1061	  PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1062	  PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1063	  PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1064	  PCI-6220, PXI-6220, PCI-6221, PXI-6221, PCI-6224, PXI-6224, PCI-6225,
1065	  PXI-6225, PCI-6229, PXI-6229, PCI-6250, PXI-6250, PCI-6251, PXI-6251,
1066	  PCIe-6251, PXIe-6251, PCI-6254, PXI-6254, PCI-6259, PXI-6259,
1067	  PCIe-6259, PXIe-6259, PCI-6280, PXI-6280, PCI-6281, PXI-6281,
1068	  PCI-6284, PXI-6284, PCI-6289, PXI-6289, PCI-6711, PXI-6711,
1069	  PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1070	  PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1071
1072	  To compile this driver as a module, choose M here: the module will be
1073	  called ni_pcimio.
1074
1075config COMEDI_RTD520
1076	tristate "Real Time Devices PCI4520/DM7520 support"
1077	select COMEDI_8254
1078	help
1079	  Enable support for Real Time Devices PCI4520/DM7520
1080
1081	  To compile this driver as a module, choose M here: the module will be
1082	  called rtd520.
1083
1084config COMEDI_S626
1085	tristate "Sensoray 626 support"
1086	help
1087	  Enable support for Sensoray 626
1088
1089	  To compile this driver as a module, choose M here: the module will be
1090	  called s626.
1091
1092config COMEDI_MITE
1093	depends on HAS_DMA
1094	tristate
1095
1096config COMEDI_NI_TIOCMD
1097	tristate
1098	depends on HAS_DMA
1099	select COMEDI_NI_TIO
1100	select COMEDI_MITE
1101
1102endif # COMEDI_PCI_DRIVERS
1103
1104menuconfig COMEDI_PCMCIA_DRIVERS
1105	tristate "Comedi PCMCIA drivers"
1106	depends on PCMCIA
1107	help
1108	  Enable support for comedi PCMCIA drivers.
1109
1110	  To compile this support as a module, choose M here: the module will
1111	  be called comedi_pcmcia.
1112
1113if COMEDI_PCMCIA_DRIVERS
1114
1115config COMEDI_CB_DAS16_CS
1116	tristate "CB DAS16 series PCMCIA support"
1117	select COMEDI_8254
1118	help
1119	  Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1120	  cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1121
1122	  To compile this driver as a module, choose M here: the module will be
1123	  called cb_das16_cs.
1124
1125config COMEDI_DAS08_CS
1126	tristate "CB DAS08 PCMCIA support"
1127	select COMEDI_DAS08
1128	help
1129	  Enable support for the ComputerBoards/MeasurementComputing DAS-08
1130	  PCMCIA card
1131
1132	  To compile this driver as a module, choose M here: the module will be
1133	  called das08_cs.
1134
1135config COMEDI_NI_DAQ_700_CS
1136	tristate "NI DAQCard-700 PCMCIA support"
1137	help
1138	  Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1139
1140	  To compile this driver as a module, choose M here: the module will be
1141	  called ni_daq_700.
1142
1143config COMEDI_NI_DAQ_DIO24_CS
1144	tristate "NI DAQ-Card DIO-24 PCMCIA support"
1145	select COMEDI_8255
1146	help
1147	  Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1148
1149	  To compile this driver as a module, choose M here: the module will be
1150	  called ni_daq_dio24.
1151
1152config COMEDI_NI_LABPC_CS
1153	tristate "NI DAQCard-1200 PCMCIA support"
1154	select COMEDI_NI_LABPC
1155	help
1156	  Enable support for the National Instruments PCMCIA DAQCard-1200
1157
1158	  To compile this driver as a module, choose M here: the module will be
1159	  called ni_labpc_cs.
1160
1161config COMEDI_NI_MIO_CS
1162	tristate "NI DAQCard E series PCMCIA support"
1163	select COMEDI_NI_TIO
1164	select COMEDI_8255
1165	help
1166	  Enable support for the National Instruments PCMCIA DAQCard E series
1167	  DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1168	  and DAQCard-6036E
1169
1170	  To compile this driver as a module, choose M here: the module will be
1171	  called ni_mio_cs.
1172
1173config COMEDI_QUATECH_DAQP_CS
1174	tristate "Quatech DAQP PCMCIA data capture card support"
1175	help
1176	  Enable support for the Quatech DAQP PCMCIA data capture cards
1177	  DAQP-208 and DAQP-308
1178
1179	  To compile this driver as a module, choose M here: the module will be
1180	  called quatech_daqp_cs.
1181
1182endif # COMEDI_PCMCIA_DRIVERS
1183
1184menuconfig COMEDI_USB_DRIVERS
1185	tristate "Comedi USB drivers"
1186	depends on USB
1187	help
1188	  Enable support for comedi USB drivers.
1189
1190	  To compile this support as a module, choose M here: the module will
1191	  be called comedi_usb.
1192
1193if COMEDI_USB_DRIVERS
1194
1195config COMEDI_DT9812
1196	tristate "DataTranslation DT9812 USB module support"
1197	help
1198	  Enable support for the Data Translation DT9812 USB module
1199
1200	  To compile this driver as a module, choose M here: the module will be
1201	  called dt9812.
1202
1203config COMEDI_NI_USB6501
1204	tristate "NI USB-6501 support"
1205	help
1206	  Enable support for the National Instruments USB-6501 module.
1207
1208	  The NI USB-6501 is a Full-Speed USB 2.0 (12 Mbit/s) device that
1209	  provides 24 digital I/O lines channels and one 32-bit counter.
1210
1211	  To compile this driver as a module, choose M here: the module will be
1212	  called ni_usb6501.
1213
1214config COMEDI_USBDUX
1215	tristate "ITL USB-DUX-D support"
1216	help
1217	  Enable support for the Incite Technology Ltd USB-DUX-D Board
1218
1219	  To compile this driver as a module, choose M here: the module will be
1220	  called usbdux.
1221
1222config COMEDI_USBDUXFAST
1223	tristate "ITL USB-DUXfast support"
1224	help
1225	  Enable support for the Incite Technology Ltd USB-DUXfast Board
1226
1227	  To compile this driver as a module, choose M here: the module will be
1228	  called usbduxfast.
1229
1230config COMEDI_USBDUXSIGMA
1231	tristate "ITL USB-DUXsigma support"
1232	help
1233	  Enable support for the Incite Technology Ltd USB-DUXsigma Board
1234
1235	  To compile this driver as a module, choose M here: the module will be
1236	  called usbduxsigma.
1237
1238config COMEDI_VMK80XX
1239	tristate "Velleman VM110/VM140 USB Board support"
1240	help
1241	  Build the Velleman USB Board Low-Level Driver supporting the
1242	  K8055/K8061 aka VM110/VM140 devices
1243
1244	  To compile this driver as a module, choose M here: the module will be
1245	  called vmk80xx.
1246
1247endif # COMEDI_USB_DRIVERS
1248
1249config COMEDI_8254
1250	tristate
1251
1252config COMEDI_8255
1253	tristate
1254
1255config COMEDI_8255_SA
1256	tristate "Standalone 8255 support"
1257	select COMEDI_8255
1258	help
1259	  Enable support for 8255 digital I/O as a standalone driver.
1260
1261	  You should enable compilation this driver if you plan to use a board
1262	  that has an 8255 chip at a known I/O base address and there are no
1263	  other Comedi drivers for the board.
1264
1265	  Note that Comedi drivers for most multi-function boards incorporating
1266	  an 8255 chip use the 'comedi_8255' module.  Most PCI-based 8255
1267	  boards use the 8255_pci driver as a wrapper around the 'comedi_8255'
1268	  module.
1269
1270	  To compile this driver as a module, choose M here: the module will be
1271	  called 8255.
1272
1273config COMEDI_KCOMEDILIB
1274	tristate "Comedi kcomedilib"
1275	help
1276	  Build the kcomedilib.
1277
1278	  This is a kernel module used to open and manipulate Comedi devices
1279	  from within kernel code.  It is currently only used by the
1280	  comedi_bond driver, and its functionality has been stripped down to
1281	  the needs of that driver, so is currently not very useful for
1282	  anything else.
1283
1284	  To compile kcomedilib as a module, choose M here: the module will be
1285	  called kcomedilib.
1286
1287config COMEDI_AMPLC_DIO200
1288	select COMEDI_8254
1289	tristate
1290
1291config COMEDI_AMPLC_PC236
1292	tristate
1293	select COMEDI_8255
1294
1295config COMEDI_DAS08
1296	tristate
1297	select COMEDI_8254
1298	select COMEDI_8255
1299
1300config COMEDI_ISADMA
1301	tristate
1302
1303config COMEDI_NI_LABPC
1304	tristate
1305	select COMEDI_8254
1306	select COMEDI_8255
1307
1308config COMEDI_NI_LABPC_ISADMA
1309	tristate
1310	default COMEDI_NI_LABPC
1311	depends on COMEDI_NI_LABPC_ISA != n
1312	depends on ISA_DMA_API
1313	select COMEDI_ISADMA
1314
1315config COMEDI_NI_TIO
1316	tristate
1317	select COMEDI_NI_ROUTING
1318
1319config COMEDI_NI_ROUTING
1320	tristate
1321
1322config COMEDI_TESTS
1323	tristate "Comedi unit tests"
1324	help
1325	  Enable comedi unit-test modules to be built.
1326
1327	  Note that the answer to this question won't directly affect the
1328	  kernel: saying N will just cause the configurator to skip all
1329	  the questions about comedi unit-test modules.
1330
1331if COMEDI_TESTS
1332
1333config COMEDI_TESTS_EXAMPLE
1334	tristate "Comedi example unit-test module"
1335	help
1336	  Enable support for an example unit-test module.  This is just a
1337	  silly example to be used as a basis for writing other unit-test
1338	  modules.
1339
1340	  To compile this as a module, choose M here: the module will be called
1341	  comedi_example_test.
1342
1343config COMEDI_TESTS_NI_ROUTES
1344	tristate "NI routing unit-test module"
1345	select COMEDI_NI_ROUTING
1346	help
1347	  Enable support for a unit-test module to test the signal routing
1348	  code used by comedi drivers for various National Instruments cards.
1349
1350	  To compile this as a module, choose M here: the module will be called
1351	  ni_routes_test.
1352
1353endif # COMEDI_TESTS
1354
1355endif # COMEDI
1356