| /openbmc/linux/include/linux/ |
| H A D | patchkey.h | 20 # define _PATCHKEY(id) (0xfd00|id)
22 # define _PATCHKEY(id) ((id<<8)|0x00fd)
|
| /openbmc/linux/include/uapi/linux/ |
| H A D | patchkey.h | 29 # define _PATCHKEY(id) (0xfd00|id)
31 # define _PATCHKEY(id) ((id<<8)|0x00fd)
|
| /openbmc/linux/arch/arm64/boot/dts/qcom/ |
| H A D | pm8550b.dtsi | 13 polling-delay = <0>;
20 hysteresis = <0>;
26 hysteresis = <0>;
38 reg = <0x7 SPMI_USID>;
40 #size-cells = <0>;
44 reg = <0xa00>;
45 interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
46 #thermal-sensor-cells = <0>;
51 reg = <0x8800>;
53 gpio-ranges = <&pm8550b_gpios 0 0 12>;
[all …]
|
| H A D | pm7550ba.dtsi | 13 polling-delay = <0>;
20 hysteresis = <0>;
26 hysteresis = <0>;
32 hysteresis = <0>;
45 #size-cells = <0>;
49 reg = <0xa00>;
50 interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
51 #thermal-sensor-cells = <0>;
56 reg = <0x8800>;
58 gpio-ranges = <&pm7550ba_gpios 0 0 8>;
[all …]
|
| /openbmc/linux/Documentation/devicetree/bindings/phy/ |
| H A D | qcom,snps-eusb2-repeater.yaml | 29 const: 0
38 minimum: 0
40 default: 0
45 minimum: 0
52 minimum: 0
68 reg = <0x7 SPMI_USID>;
70 #size-cells = <0>;
74 reg = <0xfd00>;
75 #phy-cells = <0>;
|
| /openbmc/linux/drivers/staging/media/meson/vdec/ |
| H A D | dos_regs.h | 11 #define VDEC_ASSIST_AMR1_INT8 0x00b4
13 #define ASSIST_MBOX1_CLR_REG 0x01d4
14 #define ASSIST_MBOX1_MASK 0x01d8
16 #define MPSR 0x0c04
17 #define MCPU_INTR_MSK 0x0c10
18 #define CPSR 0x0c84
20 #define IMEM_DMA_CTRL 0x0d00
21 #define IMEM_DMA_ADR 0x0d04
22 #define IMEM_DMA_COUNT 0x0d08
23 #define LMEM_DMA_CTRL 0x0d40
[all …]
|
| /openbmc/u-boot/doc/ |
| H A D | README.bedbug | 25 Added code to handle the debug exception (0x2000) on the 405.
70 Added handler for InstructionBreakpoint (0xfd00)
|
| /openbmc/linux/drivers/net/wireless/intersil/orinoco/ |
| H A D | hermes_rid.h | 7 #define HERMES_RID_CNFPORTTYPE 0xFC00
8 #define HERMES_RID_CNFOWNMACADDR 0xFC01
9 #define HERMES_RID_CNFDESIREDSSID 0xFC02
10 #define HERMES_RID_CNFOWNCHANNEL 0xFC03
11 #define HERMES_RID_CNFOWNSSID 0xFC04
12 #define HERMES_RID_CNFOWNATIMWINDOW 0xFC05
13 #define HERMES_RID_CNFSYSTEMSCALE 0xFC06
14 #define HERMES_RID_CNFMAXDATALEN 0xFC07
15 #define HERMES_RID_CNFWDSADDRESS 0xFC08
16 #define HERMES_RID_CNFPMENABLED 0xFC09
[all …]
|
| /openbmc/qemu/target/tricore/ |
| H A D | csfr.h.inc | 9 A(0xfe00, PCXI, TRICORE_FEATURE_13)
10 A(0xfe08, PC, TRICORE_FEATURE_13)
11 A(0xfe14, SYSCON, TRICORE_FEATURE_13)
12 R(0xfe18, CPU_ID, TRICORE_FEATURE_13)
13 R(0xfe1c, CORE_ID, TRICORE_FEATURE_161)
14 E(0xfe20, BIV, TRICORE_FEATURE_13)
15 E(0xfe24, BTV, TRICORE_FEATURE_13)
16 E(0xfe28, ISP, TRICORE_FEATURE_13)
17 A(0xfe2c, ICR, TRICORE_FEATURE_13)
18 A(0xfe38, FCX, TRICORE_FEATURE_13)
[all …]
|
| /openbmc/linux/include/uapi/sound/ |
| H A D | sfnt_info.h | 18 #define SNDRV_OSS_PATCHKEY(id) (0xfd00|id)
20 #define SNDRV_OSS_PATCHKEY(id) ((id<<8)|0xfd)
26 #define SNDRV_OSS_SOUNDFONT_PATCH SNDRV_OSS_PATCHKEY(0x07)
34 #define SNDRV_SFNT_LOAD_INFO 0 /* awe_voice_rec */
59 #define SNDRV_SFNT_PAT_TYPE_MISC 0
62 #define SNDRV_SFNT_PAT_LOCKED 0x100 /* lock the samples */
63 #define SNDRV_SFNT_PAT_SHARED 0x200 /* sample is shared */
76 unsigned short moddelay; /* modulation delay (0x8000) */
77 unsigned short modatkhld; /* modulation attack & hold time (0x7f7f) */
78 unsigned short moddcysus; /* modulation decay & sustain (0x7f7f) */
[all …]
|
| /openbmc/linux/drivers/media/rc/ |
| H A D | ene_ir.h | 11 #define ENE_STATUS 0 /* hardware status - unused */
18 #define ENE_FW_SAMPLE_BUFFER 0xF8F0 /* sample buffer */
19 #define ENE_FW_SAMPLE_SPACE 0x80 /* sample is space */
23 #define ENE_FW1 0xF8F8 /* flagr */
24 #define ENE_FW1_ENABLE 0x01 /* enable fw processing */
25 #define ENE_FW1_TXIRQ 0x02 /* TX interrupt pending */
26 #define ENE_FW1_HAS_EXTRA_BUF 0x04 /* fw uses extra buffer*/
27 #define ENE_FW1_EXTRA_BUF_HND 0x08 /* extra buffer handshake bit*/
28 #define ENE_FW1_LED_ON 0x10 /* turn on a led */
30 #define ENE_FW1_WPATTERN 0x20 /* enable wake pattern */
[all …]
|
| /openbmc/linux/drivers/media/usb/dvb-usb-v2/ |
| H A D | rtl28xxu.h | 40 #define DEMOD 0x0000
41 #define USB 0x0100
42 #define SYS 0x0200
43 #define I2C 0x0300
44 #define I2C_DA 0x0600
46 #define CMD_WR_FLAG 0x0010
47 #define CMD_DEMOD_RD 0x0000
48 #define CMD_DEMOD_WR 0x0010
49 #define CMD_USB_RD 0x0100
50 #define CMD_USB_WR 0x0110
[all …]
|
| /openbmc/linux/drivers/media/usb/as102/ |
| H A D | as10x_cmd.h | 18 #define SERVICE_PROG_ID 0x0002
19 #define SERVICE_PROG_VERSION 0x0001
21 #define HIER_NONE 0x00
22 #define HIER_LOW_PRIORITY 0x01
31 #define CFG_MODE_ODSP_RESUME 0
35 #define DUMP_BLOCK_SIZE_MAX 0x20
41 CONTROL_PROC_TURNON = 0x0001,
42 CONTROL_PROC_TURNON_RSP = 0x0100,
43 CONTROL_PROC_SET_REGISTER = 0x0002,
44 CONTROL_PROC_SET_REGISTER_RSP = 0x0200,
[all …]
|
| /openbmc/linux/drivers/net/wireless/intersil/hostap/ |
| H A D | hostap_common.h | 11 #define HFA384X_RID_CNFPORTTYPE 0xFC00
12 #define HFA384X_RID_CNFOWNMACADDR 0xFC01
13 #define HFA384X_RID_CNFDESIREDSSID 0xFC02
14 #define HFA384X_RID_CNFOWNCHANNEL 0xFC03
15 #define HFA384X_RID_CNFOWNSSID 0xFC04
16 #define HFA384X_RID_CNFOWNATIMWINDOW 0xFC05
17 #define HFA384X_RID_CNFSYSTEMSCALE 0xFC06
18 #define HFA384X_RID_CNFMAXDATALEN 0xFC07
19 #define HFA384X_RID_CNFWDSADDRESS 0xFC08
20 #define HFA384X_RID_CNFPMENABLED 0xFC09
[all …]
|
| /openbmc/linux/arch/sh/kernel/ |
| H A D | traps_32.c | 51 if ((count == 1) && dst[0] & 0x80) { in sign_extend()
52 dst[1] = 0xff; in sign_extend()
53 dst[2] = 0xff; in sign_extend()
54 dst[3] = 0xff; in sign_extend()
56 if ((count == 2) && dst[1] & 0x80) { in sign_extend()
57 dst[2] = 0xff; in sign_extend()
58 dst[3] = 0xff; in sign_extend()
61 if ((count == 1) && dst[3] & 0x80) { in sign_extend()
62 dst[2] = 0xff; in sign_extend()
63 dst[1] = 0xff; in sign_extend()
[all …]
|
| /openbmc/u-boot/drivers/net/ |
| H A D | eepro100.c | 19 #define SCBStatus 0 /* Rx/Command Unit Status *Word* */
34 #define SCB_STATUS_CX 0x8000 /* CU finished command (transmit) */
35 #define SCB_STATUS_FR 0x4000 /* frame received */
36 #define SCB_STATUS_CNA 0x2000 /* CU left active state */
37 #define SCB_STATUS_RNR 0x1000 /* receiver left ready state */
38 #define SCB_STATUS_MDI 0x0800 /* MDI read/write cycle done */
39 #define SCB_STATUS_SWI 0x0400 /* software generated interrupt */
40 #define SCB_STATUS_FCP 0x0100 /* flow control pause interrupt */
42 #define SCB_INTACK_MASK 0xFD00 /* all the above */
50 #define CU_NOP 0x0000
[all …]
|
| /openbmc/linux/drivers/media/i2c/ |
| H A D | ar0521.c | 31 #define AR0521_MIN_X_ADDR_START 0u
32 #define AR0521_MIN_Y_ADDR_START 0u
46 #define AR0521_ANA_GAIN_MIN 0x00
47 #define AR0521_ANA_GAIN_MAX 0x3f
48 #define AR0521_ANA_GAIN_STEP 0x01
49 #define AR0521_ANA_GAIN_DEFAULT 0x00
52 #define AR0521_REG_VT_PIX_CLK_DIV 0x0300
53 #define AR0521_REG_FRAME_LENGTH_LINES 0x0340
55 #define AR0521_REG_CHIP_ID 0x3000
56 #define AR0521_REG_COARSE_INTEGRATION_TIME 0x3012
[all …]
|
| /openbmc/linux/drivers/input/joystick/ |
| H A D | xpad.c | 80 #define MAP_DPAD_TO_BUTTONS (1 << 0)
90 #define XTYPE_XBOX 0
101 #define PKT_XB 0
131 { 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 },
132 { 0x03eb, 0xff01, "Wooting One (Legacy)", 0, XTYPE_XBOX360 },
133 { 0x03eb, 0xff02, "Wooting Two (Legacy)", 0, XTYPE_XBOX360 },
134 { 0x03f0, 0x038D, "HyperX Clutch", 0, XTYPE_XBOX360 }, /* wired */
135 { 0x03f0, 0x048D, "HyperX Clutch", 0, XTYPE_XBOX360 }, /* wireless */
136 { 0x03f0, 0x0495, "HyperX Clutch Gladiate", 0, XTYPE_XBOXONE },
137 { 0x03f0, 0x07A0, "HyperX Clutch Gladiate RGB", 0, XTYPE_XBOXONE },
[all …]
|
| /openbmc/linux/drivers/staging/wlan-ng/ |
| H A D | hfa384x.h | 31 * IEEE 802.11 D10.0
58 #define HFA384x_PORTTYPE_IBSS ((u16)0)
61 #define HFA384x_WEPFLAGS_PRIVINVOKED ((u16)BIT(0))
87 #define HFA384x_ADDR_FLAT_AUX_PAGE_MASK (0x007fff80)
88 #define HFA384x_ADDR_FLAT_AUX_OFF_MASK (0x0000007f)
89 #define HFA384x_ADDR_FLAT_CMD_PAGE_MASK (0xffff0000)
90 #define HFA384x_ADDR_FLAT_CMD_OFF_MASK (0x0000ffff)
95 #define HFA384x_ADDR_AUX_PAGE_MASK (0xffff)
96 #define HFA384x_ADDR_AUX_OFF_MASK (0x007f)
110 #define HFA3842_PDA_BASE (0x007f0000UL)
[all …]
|
| /openbmc/linux/drivers/staging/media/atomisp/i2c/ |
| H A D | mt9m114.h | 46 #define MISENSOR_FWBURST0 0x80
47 #define MISENSOR_FWBURST1 0x81
48 #define MISENSOR_FWBURST4 0x84
49 #define MISENSOR_FWBURST 0x88
51 #define MISENSOR_TOK_TERM 0xf000 /* terminating token for reg list */
52 #define MISENSOR_TOK_DELAY 0xfe00 /* delay token for reg list */
53 #define MISENSOR_TOK_FWLOAD 0xfd00 /* token indicating load FW */
54 #define MISENSOR_TOK_POLL 0xfc00 /* token indicating poll instruction */
55 #define MISENSOR_TOK_RMW 0x0010 /* RMW operation */
56 #define MISENSOR_TOK_MASK 0xfff0
[all …]
|
| /openbmc/linux/drivers/scsi/lpfc/ |
| H A D | lpfc_hw.h | 23 #define FDMI_DID 0xfffffaU
24 #define NameServer_DID 0xfffffcU
25 #define Fabric_Cntl_DID 0xfffffdU
26 #define Fabric_DID 0xfffffeU
27 #define Bcast_DID 0xffffffU
28 #define Mask_DID 0xffffffU
29 #define CT_DID_MASK 0xffff00U
30 #define Fabric_DID_MASK 0xfff000U
31 #define WELL_KNOWN_DID_MASK 0xfffff0U
42 0 */
[all …]
|
| /openbmc/linux/drivers/net/usb/ |
| H A D | r8152.c | 45 #define PLA_IDR 0xc000
46 #define PLA_RCR 0xc010
47 #define PLA_RCR1 0xc012
48 #define PLA_RMS 0xc016
49 #define PLA_RXFIFO_CTRL0 0xc0a0
50 #define PLA_RXFIFO_FULL 0xc0a2
51 #define PLA_RXFIFO_CTRL1 0xc0a4
52 #define PLA_RX_FIFO_FULL 0xc0a6
53 #define PLA_RXFIFO_CTRL2 0xc0a8
54 #define PLA_RX_FIFO_EMPTY 0xc0aa
[all …]
|
| /openbmc/qemu/disas/ |
| H A D | nanomips.c | 62 return g_strdup_printf("0x%" PRIx64, a); in to_string()
97 * 1 0
98 * 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
107 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
108 * 3 2 1 0
123 sizeof(register_list) / sizeof(register_list[0]), info); in decode_gpr_gpr4()
132 * 1 0
133 * 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
142 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
143 * 3 2 1 0
[all …]
|