/openbmc/linux/drivers/misc/ |
H A D | hi6421v600-irq.c | 32 OTMP = 0, 55 #define HISI_POWERKEY_IRQ_NUM 0 65 #define SOC_PMIC_IRQ_MASK_0_ADDR 0x0202 66 #define SOC_PMIC_IRQ0_ADDR 0x0212 74 * OTMP 0x0202 0x212 bit 0 75 * VBUS_CONNECT 0x0202 0x212 bit 1 76 * VBUS_DISCONNECT 0x0202 0x212 bit 2 77 * ALARMON_R 0x0202 0x212 bit 3 78 * HOLD_6S 0x0202 0x212 bit 4 79 * HOLD_1S 0x0202 0x212 bit 5 [all …]
|
/openbmc/linux/arch/sh/boards/mach-migor/ |
H A D | lcd_qvga.c | 27 * Index 0: "Device Code Read" returns 0x1505. 32 gpio_set_value(GPIO_PTH2, 0); in reset_lcd_module() 44 tmp1 = (data<<1 | 0x00000001) & 0x000001FF; in adjust_reg18() 45 tmp2 = (data<<2 | 0x00000200) & 0x0003FE00; in adjust_reg18() 72 return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00); in read_reg16() 81 for (i = 0; i < no_data; i += 2) in migor_lcd_qvga_seq() 86 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 90 0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001, 91 0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116, 92 0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8, [all …]
|
/openbmc/linux/include/video/ |
H A D | tgafb.h | 20 #define TGA_TYPE_8PLANE 0 28 #define TGA_ROM_OFFSET 0x0000000 29 #define TGA_REGS_OFFSET 0x0100000 30 #define TGA_8PLANE_FB_OFFSET 0x0200000 31 #define TGA_24PLANE_FB_OFFSET 0x0804000 32 #define TGA_24PLUSZ_FB_OFFSET 0x1004000 34 #define TGA_FOREGROUND_REG 0x0020 35 #define TGA_BACKGROUND_REG 0x0024 36 #define TGA_PLANEMASK_REG 0x0028 37 #define TGA_PIXELMASK_ONESHOT_REG 0x002c [all …]
|
/openbmc/linux/arch/xtensa/include/uapi/asm/ |
H A D | ptrace.h | 19 #define REG_A_BASE 0x0000 20 #define REG_AR_BASE 0x0100 21 #define REG_PC 0x0020 22 #define REG_PS 0x02e6 23 #define REG_WB 0x0248 24 #define REG_WS 0x0249 25 #define REG_LBEG 0x0200 26 #define REG_LEND 0x0201 27 #define REG_LCOUNT 0x0202 28 #define REG_SAR 0x0203 [all …]
|
/openbmc/linux/drivers/mfd/ |
H A D | janz-cmodio.c | 24 #define CMODIO_MODULBUS_SIZE 0x200 110 res->start = 0; in cmodio_setup_subdevice() 111 res->end = 0; in cmodio_setup_subdevice() 114 return 0; in cmodio_setup_subdevice() 121 unsigned int num_probed = 0; in cmodio_probe_submodules() 125 for (i = 0; i < num_modules; i++) { in cmodio_probe_submodules() 136 if (num_probed == 0) { in cmodio_probe_submodules() 144 return mfd_add_devices(&pdev->dev, 0, priv->cells, in cmodio_probe_submodules() 224 iowrite8(0xf, &priv->ctrl->int_disable); in cmodio_pci_probe() 233 return 0; in cmodio_pci_probe() [all …]
|
/openbmc/linux/block/ |
H A D | opal_proto.h | 20 TCG_SECP_00 = 0, 30 OPAL_DTA_TOKENID_BYTESTRING = 0xe0, 31 OPAL_DTA_TOKENID_SINT = 0xe1, 32 OPAL_DTA_TOKENID_UINT = 0xe2, 33 OPAL_DTA_TOKENID_TOKEN = 0xe3, /* actual token is returned */ 34 OPAL_DTA_TOKENID_INVALID = 0X0 37 #define DTAERROR_NO_METHOD_STATUS 0x89 38 #define GENERIC_HOST_SESSION_NUM 0x41 41 #define TPER_SYNC_SUPPORTED 0x01 43 #define LOCKING_SUPPORTED_MASK 0x01 [all …]
|
/openbmc/linux/arch/sh/kernel/cpu/sh4a/ |
H A D | perf_event.c | 14 #define PPC_CCBR(idx) (0xff200800 + (sizeof(u32) * idx)) 15 #define PPC_PMCTR(idx) (0xfc100000 + (sizeof(u32) * idx)) 17 #define CCBR_CIT_MASK (0x7ff << 6) 20 #define CCBR_PPCE (1 << 0) 37 #define PPC_PMCAT 0xfc100240 39 #define PPC_PMCAT 0xfc100080 61 * 0x0000 number of elapsed cycles 62 * 0x0200 number of elapsed cycles in privileged mode 63 * 0x0280 number of elapsed cycles while SR.BL is asserted 64 * 0x0202 instruction execution [all …]
|
/openbmc/u-boot/board/sandisk/sansa_fuze_plus/ |
H A D | sfp.c | 32 mxs_set_sspclk(MXC_SSPCLK0, 96000, 0); in board_early_init_f() 34 return 0; in board_early_init_f() 46 case 0: in xfi3_mmc_cd() 53 return 0; in xfi3_mmc_cd() 63 gpio_direction_output(MX23_PAD_GPMI_D08__GPIO_0_8, 0); in board_mmc_init() 64 ret = mxsmmc_initialize(bis, 0, NULL, xfi3_mmc_cd); in board_mmc_init() 69 gpio_direction_output(MX23_PAD_PWM3__GPIO_1_29, 0); in board_mmc_init() 134 uint32_t val = 0; in mxsfb_read_register() 138 reg = ((reg & 0xff) << 1) | (((reg >> 8) & 0xff) << 10); in mxsfb_read_register() 153 for (i = 0; i < 18; i++) { in mxsfb_read_register() [all …]
|
/openbmc/linux/arch/sh/boot/compressed/ |
H A D | head_32.S | 26 mov #0xffffffe0, r1 69 mov #0, r0 95 .long 0x500000F0 /* Privileged mode, Bank=0, Block=1, IMASK=0xF */ 97 .long 0x400000F0 /* magic used by kexec to parse zImage format */ 111 .word 0 113 .word 0x0202 ! header version number (>= 0x0105) 115 .word 0 ! default_switch 116 .word 0 ! SETUPSEG 117 .word 0x1000 118 .word 0 ! pointing to kernel version string [all …]
|
/openbmc/linux/include/linux/mmc/ |
H A D | sdio_ids.h | 13 #define SDIO_CLASS_NONE 0x00 /* Not a SDIO standard interface */ 14 #define SDIO_CLASS_UART 0x01 /* standard UART interface */ 15 #define SDIO_CLASS_BT_A 0x02 /* Type-A BlueTooth std interface */ 16 #define SDIO_CLASS_BT_B 0x03 /* Type-B BlueTooth std interface */ 17 #define SDIO_CLASS_GPS 0x04 /* GPS standard interface */ 18 #define SDIO_CLASS_CAMERA 0x05 /* Camera standard interface */ 19 #define SDIO_CLASS_PHS 0x06 /* PHS standard interface */ 20 #define SDIO_CLASS_WLAN 0x07 /* WLAN interface */ 21 #define SDIO_CLASS_ATA 0x08 /* Embedded SDIO-ATA std interface */ 22 #define SDIO_CLASS_BT_AMP 0x09 /* Type-A Bluetooth AMP interface */ [all …]
|
/openbmc/linux/arch/nios2/boot/compressed/ |
H A D | head.S | 33 1: initd 0(r1) 46 1: ldw r8, 0(r1) /* load a word from [r1] */ 47 stw r8, 0(r2) /* stort a word to dest [r2] */ 54 1: flushd 0(r1) 64 1: stb r0, 0(r2) 71 movia sp, 0x10000 75 stw r4, 0(sp) 82 ldw r4, 0(sp) 90 1: flushd 0(r1) 106 .short 0 [all …]
|
/openbmc/u-boot/arch/arm/include/asm/arch-omap3/ |
H A D | mux.h | 23 * M0 - Mode 0 28 #define IDIS (0 << 8) 30 #define PTD (0 << 4) 32 #define DIS (0 << 3) 41 #define M0 0 56 #define CONTROL_PADCONF_SDRC_D0 0x0030 57 #define CONTROL_PADCONF_SDRC_D1 0x0032 58 #define CONTROL_PADCONF_SDRC_D2 0x0034 59 #define CONTROL_PADCONF_SDRC_D3 0x0036 60 #define CONTROL_PADCONF_SDRC_D4 0x0038 [all …]
|
/openbmc/linux/arch/sh/include/mach-common/mach/ |
H A D | highlander.h | 6 #define PA_NORFLASH_ADDR 0x00000000 7 #define PA_NORFLASH_SIZE 0x04000000 10 #define PA_BCR 0xa4000000 /* FPGA */ 13 #define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */ 14 #define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */ 15 #define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */ 16 #define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */ 17 #define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */ 18 #define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */ 19 #define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */ [all …]
|
/openbmc/linux/drivers/iio/chemical/ |
H A D | scd30_i2c.c | 7 * I2C slave address: 0x61 21 #define SCD30_I2C_CRC8_POLYNOMIAL 0x31 24 [CMD_START_MEAS] = 0x0010, 25 [CMD_STOP_MEAS] = 0x0104, 26 [CMD_MEAS_INTERVAL] = 0x4600, 27 [CMD_MEAS_READY] = 0x0202, 28 [CMD_READ_MEAS] = 0x0300, 29 [CMD_ASC] = 0x5306, 30 [CMD_FRC] = 0x5204, 31 [CMD_TEMP_OFFSET] = 0x5403, [all …]
|
/openbmc/linux/drivers/net/can/spi/mcp251xfd/ |
H A D | mcp251xfd-crc16.c | 24 0x0000, 0x8005, 0x800f, 0x000a, 0x801b, 0x001e, 0x0014, 0x8011, 25 0x8033, 0x0036, 0x003c, 0x8039, 0x0028, 0x802d, 0x8027, 0x0022, 26 0x8063, 0x0066, 0x006c, 0x8069, 0x0078, 0x807d, 0x8077, 0x0072, 27 0x0050, 0x8055, 0x805f, 0x005a, 0x804b, 0x004e, 0x0044, 0x8041, 28 0x80c3, 0x00c6, 0x00cc, 0x80c9, 0x00d8, 0x80dd, 0x80d7, 0x00d2, 29 0x00f0, 0x80f5, 0x80ff, 0x00fa, 0x80eb, 0x00ee, 0x00e4, 0x80e1, 30 0x00a0, 0x80a5, 0x80af, 0x00aa, 0x80bb, 0x00be, 0x00b4, 0x80b1, 31 0x8093, 0x0096, 0x009c, 0x8099, 0x0088, 0x808d, 0x8087, 0x0082, 32 0x8183, 0x0186, 0x018c, 0x8189, 0x0198, 0x819d, 0x8197, 0x0192, 33 0x01b0, 0x81b5, 0x81bf, 0x01ba, 0x81ab, 0x01ae, 0x01a4, 0x81a1, [all …]
|
/openbmc/linux/drivers/net/wireless/intersil/p54/ |
H A D | eeprom.h | 131 /* common and choice range (0x0000 - 0x0fff) */ 132 #define PDR_END 0x0000 133 #define PDR_MANUFACTURING_PART_NUMBER 0x0001 134 #define PDR_PDA_VERSION 0x0002 135 #define PDR_NIC_SERIAL_NUMBER 0x0003 136 #define PDR_NIC_RAM_SIZE 0x0005 137 #define PDR_RFMODEM_SUP_RANGE 0x0006 138 #define PDR_PRISM_MAC_SUP_RANGE 0x0007 139 #define PDR_NIC_ID 0x0008 141 #define PDR_MAC_ADDRESS 0x0101 [all …]
|
/openbmc/linux/include/linux/sunrpc/ |
H A D | gss_krb5.h | 60 #define KG_TOK_MIC_MSG 0x0101 61 #define KG_TOK_WRAP_MSG 0x0201 63 #define KG2_TOK_INITIAL 0x0101 64 #define KG2_TOK_RESPONSE 0x0202 65 #define KG2_TOK_MIC 0x0404 66 #define KG2_TOK_WRAP 0x0504 68 #define KG2_TOKEN_FLAG_SENTBYACCEPTOR 0x01 69 #define KG2_TOKEN_FLAG_SEALED 0x02 70 #define KG2_TOKEN_FLAG_ACCEPTORSUBKEY 0x04 72 #define KG2_RESP_FLAG_ERROR 0x0001 [all …]
|
/openbmc/linux/sound/soc/codecs/ |
H A D | si476x.c | 24 SI476X_DIGITAL_IO_OUTPUT_FORMAT = 0x0203, 25 SI476X_DIGITAL_IO_OUTPUT_SAMPLE_RATE = 0x0202, 33 #define SI476X_DIGITAL_IO_OUTPUT_WIDTH_MASK ((0x7 << SI476X_DIGITAL_IO_SLOT_SIZE_SHIFT) | \ 34 (0x7 << SI476X_DIGITAL_IO_SAMPLE_SIZE_SHIFT)) 35 #define SI476X_DIGITAL_IO_OUTPUT_FORMAT_MASK (0x7e) 38 SI476X_DAUDIO_MODE_I2S = (0x0 << 1), 39 SI476X_DAUDIO_MODE_DSP_A = (0x6 << 1), 40 SI476X_DAUDIO_MODE_DSP_B = (0x7 << 1), 41 SI476X_DAUDIO_MODE_LEFT_J = (0x8 << 1), 42 SI476X_DAUDIO_MODE_RIGHT_J = (0x9 << 1), [all …]
|
H A D | rt1308-sdw.h | 12 { 0x0000, 0x00 }, 13 { 0x0001, 0x00 }, 14 { 0x0002, 0x00 }, 15 { 0x0003, 0x00 }, 16 { 0x0004, 0x00 }, 17 { 0x0005, 0x01 }, 18 { 0x0020, 0x00 }, 19 { 0x0022, 0x00 }, 20 { 0x0023, 0x00 }, 21 { 0x0024, 0x00 }, [all …]
|
H A D | rt715-sdca-sdw.h | 14 { 0x201a, 0x00 }, 15 { 0x201e, 0x00 }, 16 { 0x2020, 0x00 }, 17 { 0x2021, 0x00 }, 18 { 0x2022, 0x00 }, 19 { 0x2023, 0x00 }, 20 { 0x2024, 0x00 }, 21 { 0x2025, 0x01 }, 22 { 0x2026, 0x00 }, 23 { 0x2027, 0x00 }, [all …]
|
/openbmc/linux/drivers/media/i2c/ |
H A D | imx319.c | 14 #define IMX319_REG_MODE_SELECT 0x0100 15 #define IMX319_MODE_STANDBY 0x00 16 #define IMX319_MODE_STREAMING 0x01 19 #define IMX319_REG_CHIP_ID 0x0016 20 #define IMX319_CHIP_ID 0x0319 23 #define IMX319_REG_FLL 0x0340 24 #define IMX319_FLL_MAX 0xffff 27 #define IMX319_REG_EXPOSURE 0x0202 30 #define IMX319_EXPOSURE_DEFAULT 0x04f6 35 * | [7:0] | [15:8] | [all …]
|
/openbmc/qemu/include/hw/pci/ |
H A D | pci_ids.h | 16 #define PCI_CLASS_NOT_DEFINED 0x0000 17 #define PCI_CLASS_NOT_DEFINED_VGA 0x0001 19 #define PCI_BASE_CLASS_STORAGE 0x01 20 #define PCI_CLASS_STORAGE_SCSI 0x0100 21 #define PCI_CLASS_STORAGE_IDE 0x0101 22 #define PCI_CLASS_STORAGE_FLOPPY 0x0102 23 #define PCI_CLASS_STORAGE_IPI 0x0103 24 #define PCI_CLASS_STORAGE_RAID 0x0104 25 #define PCI_CLASS_STORAGE_ATA 0x0105 26 #define PCI_CLASS_STORAGE_SATA 0x0106 [all …]
|
/openbmc/linux/drivers/media/radio/si4713/ |
H A D | si4713.h | 25 #define SI4713_PRODUCT_NUMBER 0x0D 41 #define SI4713_PWUP_FUNC_TX 0x02 42 #define SI4713_PWUP_FUNC_PATCH 0x0F 43 #define SI4713_PWUP_OPMOD_ANALOG 0x50 44 #define SI4713_PWUP_OPMOD_DIGITAL 0x0F 47 #define SI4713_CMD_POWER_UP 0x01 50 #define SI4713_CMD_GET_REV 0x10 53 #define SI4713_CMD_POWER_DOWN 0x11 57 #define SI4713_CMD_SET_PROPERTY 0x12 61 #define SI4713_CMD_GET_PROPERTY 0x13 [all …]
|
/openbmc/u-boot/drivers/crypto/fsl/ |
H A D | sec.c | 15 * called with sec_rev == 0 if not on an E processor 27 { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */ in fdt_fixup_crypto_node() 28 { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */ in fdt_fixup_crypto_node() 29 { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */ in fdt_fixup_crypto_node() 30 { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */ in fdt_fixup_crypto_node() 31 { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */ in fdt_fixup_crypto_node() 32 { 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */ in fdt_fixup_crypto_node() 33 { 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */ in fdt_fixup_crypto_node() 42 crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0"); in fdt_fixup_crypto_node() 47 if (crypto_node > 0 && !sec_rev) { in fdt_fixup_crypto_node() [all …]
|
/openbmc/linux/drivers/ata/ |
H A D | pata_triflex.c | 46 { 0x80, 1, 0x01, 0x01 }, in triflex_prereset() 47 { 0x80, 1, 0x02, 0x02 } in triflex_prereset() 76 u32 timing = 0; in triflex_load_timing() 78 int channel_offset = ap->port_no ? 0x74: 0x70; in triflex_load_timing() 79 unsigned int is_slave = (adev->devno != 0); in triflex_load_timing() 88 timing = 0x0103;break; in triflex_load_timing() 90 timing = 0x0203;break; in triflex_load_timing() 92 timing = 0x0808;break; in triflex_load_timing() 96 timing = 0x0F0F;break; in triflex_load_timing() 98 timing = 0x0202;break; in triflex_load_timing() [all …]
|