Merge tag 'fsl-qoriq-for-v2019.01-rc2' of git://git.denx.de/u-boot-fsl-qoriq

Add TFA boot flow for some Layerscape platforms
Add support for lx2160a SoC

[trini: Add a bunch of m

Merge tag 'fsl-qoriq-for-v2019.01-rc2' of git://git.denx.de/u-boot-fsl-qoriq

Add TFA boot flow for some Layerscape platforms
Add support for lx2160a SoC

[trini: Add a bunch of missing MAINTAINERS entries]
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge tag 'mips-fixes-for-2019.01' of git://git.denx.de/u-boot-mips

- mips: bcm: disable CONFIG_SWAP_IO_SPACE to force native endianess in readl() & co.
this fixes 09ace9161b95ad3a04b3

Merge tag 'mips-fixes-for-2019.01' of git://git.denx.de/u-boot-mips

- mips: bcm: disable CONFIG_SWAP_IO_SPACE to force native endianess in readl() & co.
this fixes 09ace9161b95ad3a04b33d1d6a65a929901d28c8
- mips: bcm6838: fix device tree warning

show more ...

Merge tag 'for-master-20181210' of git://git.denx.de/u-boot-rockchip

Improvements:
- init DRAM for RK322x in SPL
- add FAN53555 PMIC/regulator driver
- update MicroCrystal RV3029

Merge tag 'for-master-20181210' of git://git.denx.de/u-boot-rockchip

Improvements:
- init DRAM for RK322x in SPL
- add FAN53555 PMIC/regulator driver
- update MicroCrystal RV3029 driver to Kconfig and sync from Linux
- add bootcount uclass and first DM-driver for bootcount

show more ...

bootcount: add uclass for bootcount

The original bootcount methods do not provide an interface to DM and
rely on a static configuration for I2C devices (e.g. bus, chip-addr,
etc. are

bootcount: add uclass for bootcount

The original bootcount methods do not provide an interface to DM and
rely on a static configuration for I2C devices (e.g. bus, chip-addr,
etc. are configured through defines statically). On a modern system
that exposes multiple devices in a DTS-configurable way, this is less
than optimal and a interface to DM-based devices will be desirable.

This adds a simple driver that is DM-aware and configurable via DTS.
If ambiguous (i.e. multiple bootcount-devices are present) the
/chosen/u-boot,bootcount-device property can be used to select one
bootcount device.

Initially, this provides support for the following DM devices:
* RTC devices

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-spi

This is the PR for SPI-NAND changes along with few spi changes.

[trini: Re-sync changes for ls1012afrwy_qspi*_defconfig]
Si

Merge branch 'master' of git://git.denx.de/u-boot-spi

This is the PR for SPI-NAND changes along with few spi changes.

[trini: Re-sync changes for ls1012afrwy_qspi*_defconfig]
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge git://git.denx.de/u-boot-dm

Merge branch 'master' of git://git.denx.de/u-boot-video

Signed-off-by: Tom Rini <trini@konsulko.com>

Merge branch 'master' of git://git.denx.de/u-boot-sunxi

Merge tag 'mpc85xx-for-v2018.11-rc1' of git://git.denx.de/u-boot-mpc85xx

Use device tree for mpc85xx with binman. Enabled for T2080QDS.

Merge tag 'fsl-qoriq-for-v2018.11-rc1' of git://git.denx.de/u-boot-fsl-qoriq

Switch to driver model for eSDHC on Layerscape SoCs including LS1021A,
LS1043A, LS1046A, LS1088A, LS2088A.

Merge tag 'fsl-qoriq-for-v2018.11-rc1' of git://git.denx.de/u-boot-fsl-qoriq

Switch to driver model for eSDHC on Layerscape SoCs including LS1021A,
LS1043A, LS1046A, LS1088A, LS2088A.
Switch to driver model for SATA on LS1021A and LS1043A.
Add support for LS1012AFRWY rev C board.
Enable SMMU for LS1043A.

show more ...

doc: dtbinding: Add file system firmware loader binding document

Add a document to describe file system firmware loader binding
information.

Signed-off-by: Tien Fong Chee <tien.

doc: dtbinding: Add file system firmware loader binding document

Add a document to describe file system firmware loader binding
information.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Merge git://git.denx.de/u-boot-dm

Merge branch 'master' of git://git.denx.de/u-boot-rockchip

spl: document 'chosen/u-boot, spl-boot-device'

To let the full U-Boot know where it was booted from (i.e. which of
the entries in /chosen/u-boot,spl-boot-order' contained a valid
ima

spl: document 'chosen/u-boot, spl-boot-device'

To let the full U-Boot know where it was booted from (i.e. which of
the entries in /chosen/u-boot,spl-boot-order' contained a valid
image), we define (and document) /chosen/u-boot,spl-boot-device as the
property that could/should automatically be injected by SPL.

This commit only contains a documentation change, which documents the
new property and the intended usage.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>

show more ...

Merge git://git.denx.de/u-boot-spi

Merge branch 'rmobile' of git://git.denx.de/u-boot-sh

Merge git://git.denx.de/u-boot-video

Merge git://git.denx.de/u-boot-usb

Merge git://git.denx.de/u-boot-rockchip

rockchip: spl: support a 'same-as-spl'-specifier in the spl-boot-order

It is often desirable to configure the spl-boot-order (i.e. the order
that SPL probes devices to find the FIT image

rockchip: spl: support a 'same-as-spl'-specifier in the spl-boot-order

It is often desirable to configure the spl-boot-order (i.e. the order
that SPL probes devices to find the FIT image containing a full U-Boot)
such that it contains 'the same device the SPL stage was booted from'
early on. To support this, we introduce the 'same-as-spl' specifier
for the spl-boot-order property.

This commit adds:
- documentation for the new board_spl_was_booted_from() function that
individual SoCs/boards should provide, if they can determine where
the SPL was booted from
- implements the new board_spl_was_booted_from() stub function
- adds support for handling the 'same-as-spl' specifier and calling
into the per-SoC/per-board support code.

This also updates the documentation for the 'u-boot,spl-boot-order'
property.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Merge branch 'master' of git://www.denx.de/git/u-boot-imx

Drop CONFIG_STACKSIZE from include/configs/imx6_logic.h

Signed-off-by: Tom Rini <trini@konsulko.com>

Merge branch 'master' of git://git.denx.de/u-boot-samsung

Merge branch 'master' of git://git.denx.de/u-boot-sunxi

trini: Disable CONFIG_SPL_USE_ARCH_MEMSET on orangepi_2

Signed-off-by: Tom Rini <trini@konsulko.com>

Merge git://git.denx.de/u-boot-dm

rockchip: rk3399: spl: make SPL boot-order configurable via /chosen

The RK3399 does not have any boot selection pins and the BootROM probes
the boot interfaces using the following boot-o

rockchip: rk3399: spl: make SPL boot-order configurable via /chosen

The RK3399 does not have any boot selection pins and the BootROM probes
the boot interfaces using the following boot-order:
1. SPI
2. eMMC (sdhci in DTS)
3. SD card (sdmmc in DTS)
4. USB loader
For ease of deployment, the SPL stage should mirror the boot order of
the ROM and use the same probing order (assuming that valid images can
be detected by SPL) unless instructed otherwise. The boot-order can
then be configured via the 'u-boot,spl-boot-order' property in the
chosen-node of the DTS.

While this approach is easily extensible to other boards, it is only
implemented for the RK3399 for now, as the large SRAM on the RK3399
makes this easy to fit the needed infrastructure into SPL and our
production setup already runs with DM, OF_CONTROL and BLK in SPL.

The new boot-order property is expected to be used in conjunction with
FIT images (and all legacy image formats disabled via Kconfig).

A boot-sequence with probing and fallthroughs from SPI via eMMC to SD
card (i.e. &spiflash, &sdhci, &sdmmc) has been validated on the RK3399-Q7.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Tested-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...