#
53cc647d |
| 30-Nov-2015 |
Peng Fan <Peng.Fan@freescale.com> |
imx: mx7dsabresd: Add QSPI support Support qspi flashes for mx7dsabresd 1. introduce pin mux settings 2. enable qspi clock 3. introduce related macro definitions Default
imx: mx7dsabresd: Add QSPI support Support qspi flashes for mx7dsabresd 1. introduce pin mux settings 2. enable qspi clock 3. introduce related macro definitions Default QSPI is not enabled, since we need hardware rework to use QSPI, see SPF-28590, page 9: " QSPI signals are muxed with EPDC_D[7:0] When using QSPI: de-populate R388-R391, R396-R399 populate R392-R395, R299, R300 " After hardware rework, define CONFIG_FSL_QSPI in mx7dsabresd.h. qspi flashes can be deteced and read/erase/write. Log info: " => sf probe SF: Detected MX25L51235F with page size 256 Bytes, erase size 64 KiB, total 64 MiB => sf read 0x80000000 0 0x4000000 device 0 whole chip SF: 67108864 bytes @ 0x0 Read: OK => sf erase 0 0x4000000 SF: 67108864 bytes @ 0x0 Erased: OK => sf write 0x80000000 0 0x4000000 device 0 whole chip SF: 67108864 bytes @ 0x0 Written: OK " Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Adrian Alonso <aalonso@freescale.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Jagan Teki <jteki@openedev.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
show more ...
|
#
98e73c83 |
| 16-Nov-2015 |
Tom Rini <trini@konsulko.com> |
Merge branch 'master' of git://www.denx.de/git/u-boot-imx
|
#
ebe517b6 |
| 29-Oct-2015 |
Peng Fan <Peng.Fan@freescale.com> |
imx: mx7dsabresd: support lcdif Support LCDIF for mx7dsabresd board: 1. Add pinmux settings 2. Add VIDEO related macro definition and videomode env settings. Signed-off-by:
imx: mx7dsabresd: support lcdif Support LCDIF for mx7dsabresd board: 1. Add pinmux settings 2. Add VIDEO related macro definition and videomode env settings. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Adrian Alonso <aalonso@freescale.com>
show more ...
|
#
13a39725 |
| 14-Oct-2015 |
Albert ARIBAUD <albert.u.boot@aribaud.net> |
Merge remote-tracking branch 'u-boot/master'
|
#
1a9c229b |
| 24-Sep-2015 |
Tom Rini <trini@konsulko.com> |
Merge branch 'master' of git://www.denx.de/git/u-boot-imx
|
#
60dba188 |
| 15-Sep-2015 |
Peng Fan <Peng.Fan@freescale.com> |
imx: mx7dsabresd: drop code for CONFIG_CMD_BMODE We use outer pmic reset and drop internal reset signal, bmode will not work as expected, so drop boot mode code for 7dsabresd board.
imx: mx7dsabresd: drop code for CONFIG_CMD_BMODE We use outer pmic reset and drop internal reset signal, bmode will not work as expected, so drop boot mode code for 7dsabresd board. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Adrian Alonso <aalonso@freescale.com>
show more ...
|
#
e0ece173 |
| 13-Sep-2015 |
Fabio Estevam <fabio.estevam@freescale.com> |
mx7dsabresd: Remove get_board_rev() get_board_rev() is not actually providing the board revision. It just returns the CPU revision instead. As the CPU revision is already p
mx7dsabresd: Remove get_board_rev() get_board_rev() is not actually providing the board revision. It just returns the CPU revision instead. As the CPU revision is already printed on boot, there is no reason to have get_board_rev(), so let's remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
show more ...
|
#
0df2f01d |
| 13-Sep-2015 |
Fabio Estevam <fabio.estevam@freescale.com> |
mx7dsabresd: Include USB header Include <usb/ehci-fsl.h> in order to fix the following sparse warning: board/freescale/mx7dsabresd/mx7dsabresd.c:538:5: warning: symbol 'board_ehci_h
mx7dsabresd: Include USB header Include <usb/ehci-fsl.h> in order to fix the following sparse warning: board/freescale/mx7dsabresd/mx7dsabresd.c:538:5: warning: symbol 'board_ehci_hcd_init' was not declared. Should it be static? Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
show more ...
|
#
b7d4db2f |
| 13-Sep-2015 |
Fabio Estevam <fabio.estevam@freescale.com> |
mx7dsabreasd: Remove dead code iox74lv_set() is not used anywhere, so let's remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
#
72e49e03 |
| 13-Sep-2015 |
Fabio Estevam <fabio.estevam@freescale.com> |
mx7dsabresd: Staticize when possible Make the internal symbols static when possible. This prevents sparse build warnings. Signed-off-by: Fabio Estevam <fabio.estevam@freesc
mx7dsabresd: Staticize when possible Make the internal symbols static when possible. This prevents sparse build warnings. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
show more ...
|
#
4fae48e8 |
| 14-Sep-2015 |
Peng Fan <Peng.Fan@freescale.com> |
imx: mx7dsabresd set wdog SRS bit We use trigger pmic reset to reset the board, so set bit SRS to disable internal WDOG_RESET_B_DEB to make reset stable. Signed-off-by: Peng Fan
imx: mx7dsabresd set wdog SRS bit We use trigger pmic reset to reset the board, so set bit SRS to disable internal WDOG_RESET_B_DEB to make reset stable. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Adrian Alonso <aalonso@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
show more ...
|
#
850f7887 |
| 13-Sep-2015 |
Tom Rini <trini@konsulko.com> |
Merge branch 'rmobile' of git://git.denx.de/u-boot-sh
|
#
1a8150d4 |
| 03-Sep-2015 |
Adrian Alonso <aalonso@freescale.com> |
imx: mx7dsabresd: Add support for MX7D SABRESD board * Add i.MX7D SABRESD target board support with enabled modules: UART, PMIC, USB/OTG, SD, eMMC, ENET, I2C, 74LV IOX. Buil
imx: mx7dsabresd: Add support for MX7D SABRESD board * Add i.MX7D SABRESD target board support with enabled modules: UART, PMIC, USB/OTG, SD, eMMC, ENET, I2C, 74LV IOX. Build target: mx7dsabresd_config Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Adrian Alonso <aalonso@freescale.com>
show more ...
|