[ALSA] oxygen: mute by default

Initialize the playback volume controls as being muted and having
minimal volume.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiw

[ALSA] oxygen: mute by default

Initialize the playback volume controls as being muted and having
minimal volume.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] oxygen: generalize handling of DAC volume limits

Add fields for the DAC volume limits to the module structure so that
model drivers do not need to install their own control info handlers.

Si

[ALSA] oxygen: generalize handling of DAC volume limits

Add fields for the DAC volume limits to the module structure so that
model drivers do not need to install their own control info handlers.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: fix DX front panel I/O

Fix the GPIO 1 mixer control to enable I/O through the front panel
connector of the Xonar DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-

[ALSA] virtuoso: fix DX front panel I/O

Fix the GPIO 1 mixer control to enable I/O through the front panel
connector of the Xonar DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: initialize two-wire control register

On the Xonar DX, initialize all bits of the two-wire control register.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takas

[ALSA] virtuoso: initialize two-wire control register

On the Xonar DX, initialize all bits of the two-wire control register.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: add GPIO 1 mixer control

Add a mixer control for switching whatever it is that is connected to
GPIO pin 1 on the Xonar DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signe

[ALSA] virtuoso: add GPIO 1 mixer control

Add a mixer control for switching whatever it is that is connected to
GPIO pin 1 on the Xonar DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] oxygen: use SPDIF input only if present

If the card model does not have a digital input or an AC97 codec,
disable the respective interrupt and mixer controls.

Signed-off-by: Clemens Ladisch

[ALSA] oxygen: use SPDIF input only if present

If the card model does not have a digital input or an AC97 codec,
disable the respective interrupt and mixer controls.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: correctly switch input jack on Xonar DX

When selecting the capture source on the Xonar DX, the input jack must
be routed to either the line input or the microphone input by setting

[ALSA] virtuoso: correctly switch input jack on Xonar DX

When selecting the capture source on the Xonar DX, the input jack must
be routed to either the line input or the microphone input by setting a
GPIO pin. This requires an additional callback so that the model driver
can hook into the toggling of AC97 switches.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: add Xonar DX support

Add support for the Asus Xonar DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] virtuoso: fix typo

Fix a (fortunately harmless) typo.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] virtuoso: change card short name

Change the card short name to show to show the card name instead of the
chip name.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi

[ALSA] virtuoso: change card short name

Change the card short name to show to show the card name instead of the
chip name.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: set PCM1796 oversampling rate

When playing data at 96 kHz or higher, reduce the DAC oversampling rate
to 32.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Taka

[ALSA] virtuoso: set PCM1796 oversampling rate

When playing data at 96 kHz or higher, reduce the DAC oversampling rate
to 32.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: move some code to xonar_common_init()

Move the code that is common to all Xonar models to a separate function,
and make it more generic in preparation for another model.

Signed-off

[ALSA] virtuoso: move some code to xonar_common_init()

Move the code that is common to all Xonar models to a separate function,
and make it more generic in preparation for another model.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: allow both CS5381 and CS5361

Rename all CS5381 symbols to CS53x1 because they can also be used for
Xonar models with a CS5361.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
S

[ALSA] virtuoso: allow both CS5381 and CS5361

Rename all CS5381 symbols to CS53x1 because they can also be used for
Xonar models with a CS5361.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: separate D2/D2X init functions

Use separate model structures for the D2 and D2X so that the init
function does not have to check for the model again.

Signed-off-by: Clemens Ladisch

[ALSA] virtuoso: separate D2/D2X init functions

Use separate model structures for the D2 and D2X so that the init
function does not have to check for the model again.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] oxygen: fix line-in recording selection (now for real)

On C-Media cards, the GPIO pin 0 of the CM9780 must be handled exactly
like on Xonar cards, so move the Xonar code to the common mixer c

[ALSA] oxygen: fix line-in recording selection (now for real)

On C-Media cards, the GPIO pin 0 of the CM9780 must be handled exactly
like on Xonar cards, so move the Xonar code to the common mixer code.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] oxygen: move MIDI flag to model struct

Put the flag that enables the MIDI port into the model structure instead
of passing it as a separate parameter to oxygen_pci_probe().

Signed-off-by: Cl

[ALSA] oxygen: move MIDI flag to model struct

Put the flag that enables the MIDI port into the model structure instead
of passing it as a separate parameter to oxygen_pci_probe().

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] oxygen: make SPI/2-wire configuration model-specific

Allow the model drivers to specify if the codec communication goes over
SPI or a 2-wire bus.

Signed-off-by: Clemens Ladisch <clemens@ladi

[ALSA] oxygen: make SPI/2-wire configuration model-specific

Allow the model drivers to specify if the codec communication goes over
SPI or a 2-wire bus.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] oxygen: change model-specific PCM device configuration

When specifying which PCM devices to use, model drivers now use flags
that also specify the routing between PCM devices and DMA channels

[ALSA] oxygen: change model-specific PCM device configuration

When specifying which PCM devices to use, model drivers now use flags
that also specify the routing between PCM devices and DMA channels
instead of just DMA channel bits. This simplifies some code that checks
for these flags.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: move PCM1796 symbols to a header file

Move the PCM1796 register symbol definitions to their own header file.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Taka

[ALSA] virtuoso: move PCM1796 symbols to a header file

Move the PCM1796 register symbol definitions to their own header file.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] sound: virtuoso.c fix shadowed variable warning

Use priv_idx as an identifier.
sound/pci/oxygen/virtuoso.c:277:15: warning: symbol 'index' shadows an earlier one
sound/pci/oxygen/virtuoso.c:5

[ALSA] sound: virtuoso.c fix shadowed variable warning

Use priv_idx as an identifier.
sound/pci/oxygen/virtuoso.c:277:15: warning: symbol 'index' shadows an earlier one
sound/pci/oxygen/virtuoso.c:56:12: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] oxygen: add owner field

I forgot to set the module owner for the HiFier/Xonar models.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] virtuoso: monitor external power on D2X

On the Xonar D2X, monitor the GPIO pin that indicates whether external
power is present.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-of

[ALSA] virtuoso: monitor external power on D2X

On the Xonar D2X, monitor the GPIO pin that indicates whether external
power is present.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

show more ...

[ALSA] oxygen: add front panel controls

Add mixer controls for the front panel AC97 codec.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] oxygen: make line-in exclusive only on Xonar

Move the line input switching code to the Virtuoso driver because only
the Xonar cards bypass the analog mixer for line input.

Signed-off-by: Cle

[ALSA] oxygen: make line-in exclusive only on Xonar

Move the line input switching code to the Virtuoso driver because only
the Xonar cards bypass the analog mixer for line input.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

show more ...

[ALSA] oxygen: make the number of analog output configurable

Add a field to struct oxygen_model to allow model drivers for cards with
less than eight output channels.

Signed-off-by: Clemens Ladisch

[ALSA] oxygen: make the number of analog output configurable

Add a field to struct oxygen_model to allow model drivers for cards with
less than eight output channels.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

show more ...