ALSA: virtuoso: add Xonar D1 support

Add support for the Asus Xonar D1. It is the same as the DX, but
without the external power detection.

Signed-off-by: Clemens Ladisch <clem

ALSA: virtuoso: add Xonar D1 support

Add support for the Asus Xonar D1. It is the same as the DX, but
without the external power detection.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] oxygen: add PM support

Add suspend/resume support.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

[ALSA] virtuoso: add xonar_enable_output()

Move the setting of the output enable GPIO bit to a separate function.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-

[ALSA] virtuoso: add xonar_enable_output()

Move the setting of the output enable GPIO bit to a separate function.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

show more ...

[ALSA] oxygen: separate out hardware initialization code

Create separate functions for the code that initializes the hardware, as
opposed to initializing internal driver state, so that t

[ALSA] oxygen: separate out hardware initialization code

Create separate functions for the code that initializes the hardware, as
opposed to initializing internal driver state, so that they can be
reused for resume support.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

show more ...

[ALSA] oxygen: simplify DAC volume initialization

When initializing the DAC volume registers, we can just use the generic
volume update functions instead of setting the registers manuall

[ALSA] oxygen: simplify DAC volume initialization

When initializing the DAC volume registers, we can just use the generic
volume update functions instead of setting the registers manually.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

show more ...

[ALSA] oxygen: save register writes

Save the written values of all CMI8788 and AC97 registers and of some of
the DAC/ADC registers so that it is possible to restore the register
stat

[ALSA] oxygen: save register writes

Save the written values of all CMI8788 and AC97 registers and of some of
the DAC/ADC registers so that it is possible to restore the register
state later.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

show more ...

[ALSA] oxygen: fix version in MODULE_LICENSE

Adjust the MODULE_LICENSE strings to properly reflect the actual license.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed

[ALSA] oxygen: fix version in MODULE_LICENSE

Adjust the MODULE_LICENSE strings to properly reflect the actual license.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>

show more ...

[ALSA] oxygen: generalize DAC volume TLV handling

Add a pointer for DAC volume TLV data to the model structure so that the
model driver do not need to manually assign it in their control

[ALSA] oxygen: generalize DAC volume TLV handling

Add a pointer for DAC volume TLV data to the model structure so that the
model driver do not need to manually assign it in their control filter.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] oxygen: mute by default

Initialize the playback volume controls as being muted and having
minimal volume.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-o

[ALSA] oxygen: mute by default

Initialize the playback volume controls as being muted and having
minimal volume.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] oxygen: generalize handling of DAC volume limits

Add fields for the DAC volume limits to the module structure so that
model drivers do not need to install their own control info h

[ALSA] oxygen: generalize handling of DAC volume limits

Add fields for the DAC volume limits to the module structure so that
model drivers do not need to install their own control info handlers.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: fix DX front panel I/O

Fix the GPIO 1 mixer control to enable I/O through the front panel
connector of the Xonar DX.

Signed-off-by: Clemens Ladisch <clemens@lad

[ALSA] virtuoso: fix DX front panel I/O

Fix the GPIO 1 mixer control to enable I/O through the front panel
connector of the Xonar DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: initialize two-wire control register

On the Xonar DX, initialize all bits of the two-wire control register.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

[ALSA] virtuoso: initialize two-wire control register

On the Xonar DX, initialize all bits of the two-wire control register.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: add GPIO 1 mixer control

Add a mixer control for switching whatever it is that is connected to
GPIO pin 1 on the Xonar DX.

Signed-off-by: Clemens Ladisch <cleme

[ALSA] virtuoso: add GPIO 1 mixer control

Add a mixer control for switching whatever it is that is connected to
GPIO pin 1 on the Xonar DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] oxygen: use SPDIF input only if present

If the card model does not have a digital input or an AC97 codec,
disable the respective interrupt and mixer controls.

Signed-off-

[ALSA] oxygen: use SPDIF input only if present

If the card model does not have a digital input or an AC97 codec,
disable the respective interrupt and mixer controls.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: correctly switch input jack on Xonar DX

When selecting the capture source on the Xonar DX, the input jack must
be routed to either the line input or the microphone input

[ALSA] virtuoso: correctly switch input jack on Xonar DX

When selecting the capture source on the Xonar DX, the input jack must
be routed to either the line input or the microphone input by setting a
GPIO pin. This requires an additional callback so that the model driver
can hook into the toggling of AC97 switches.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: add Xonar DX support

Add support for the Asus Xonar DX.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] virtuoso: fix typo

Fix a (fortunately harmless) typo.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ALSA] virtuoso: change card short name

Change the card short name to show to show the card name instead of the
chip name.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

[ALSA] virtuoso: change card short name

Change the card short name to show to show the card name instead of the
chip name.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: set PCM1796 oversampling rate

When playing data at 96 kHz or higher, reduce the DAC oversampling rate
to 32.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

[ALSA] virtuoso: set PCM1796 oversampling rate

When playing data at 96 kHz or higher, reduce the DAC oversampling rate
to 32.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: move some code to xonar_common_init()

Move the code that is common to all Xonar models to a separate function,
and make it more generic in preparation for another model.

[ALSA] virtuoso: move some code to xonar_common_init()

Move the code that is common to all Xonar models to a separate function,
and make it more generic in preparation for another model.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: allow both CS5381 and CS5361

Rename all CS5381 symbols to CS53x1 because they can also be used for
Xonar models with a CS5361.

Signed-off-by: Clemens Ladisch <c

[ALSA] virtuoso: allow both CS5381 and CS5361

Rename all CS5381 symbols to CS53x1 because they can also be used for
Xonar models with a CS5361.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] virtuoso: separate D2/D2X init functions

Use separate model structures for the D2 and D2X so that the init
function does not have to check for the model again.

Signed-off

[ALSA] virtuoso: separate D2/D2X init functions

Use separate model structures for the D2 and D2X so that the init
function does not have to check for the model again.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] oxygen: fix line-in recording selection (now for real)

On C-Media cards, the GPIO pin 0 of the CM9780 must be handled exactly
like on Xonar cards, so move the Xonar code to the co

[ALSA] oxygen: fix line-in recording selection (now for real)

On C-Media cards, the GPIO pin 0 of the CM9780 must be handled exactly
like on Xonar cards, so move the Xonar code to the common mixer code.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] oxygen: move MIDI flag to model struct

Put the flag that enables the MIDI port into the model structure instead
of passing it as a separate parameter to oxygen_pci_probe().

[ALSA] oxygen: move MIDI flag to model struct

Put the flag that enables the MIDI port into the model structure instead
of passing it as a separate parameter to oxygen_pci_probe().

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

[ALSA] oxygen: make SPI/2-wire configuration model-specific

Allow the model drivers to specify if the codec communication goes over
SPI or a 2-wire bus.

Signed-off-by: Clemens L

[ALSA] oxygen: make SPI/2-wire configuration model-specific

Allow the model drivers to specify if the codec communication goes over
SPI or a 2-wire bus.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...