ALSA: firewire-motu: wait for notification when changing clock configuration for protocol v3

It costs expensive to change clock configuration for models of protocol
version 3. In current

ALSA: firewire-motu: wait for notification when changing clock configuration for protocol v3

It costs expensive to change clock configuration for models of protocol
version 3. In current implementation, speculative strategy is used to
finish the operation; just waiting for 4 seconds. As long as I investigate,
when accepting and changing clock status actually, the device sends
notification with mask.

This commit uses wise way to wait for the notification after changing
sampling clock rate during 4 seconds.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200614141221.53527-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: firewire-motu: add support for MOTU UltraLite-mk3 (FireWire only model)

UltraLite-mk3 was shipped 2008 by MOTU. This model has two lineups;
FireWire-only and FireWire/USB2.0 Hybrid

ALSA: firewire-motu: add support for MOTU UltraLite-mk3 (FireWire only model)

UltraLite-mk3 was shipped 2008 by MOTU. This model has two lineups;
FireWire-only and FireWire/USB2.0 Hybrid model. Additionally, the latter
has two variants in respect of the type of IEEE 1394 connector; alpha
and beta connector.

This commit adds support for the FireWire-only model, which is already
discontinued.

$ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 0410353a bus_info_length 4, crc_length 16, crc 13626
404 31333934 bus_name "1394"
408 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
40c 0001f200 company_id 0001f2 |
410 000902c7 device_id 00000902c7 | EUI-64 0001f200000902c7

root directory
-----------------------------------------------------------------
414 0004ef04 directory_length 4, crc 61188
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 d1000002 --> unit directory at 428
424 8d000005 --> eui-64 leaf at 438

unit directory at 428
-----------------------------------------------------------------
428 00035556 directory_length 3, crc 21846
42c 120001f2 specifier id
430 13000019 version
434 17100800 model

eui-64 leaf at 438
-----------------------------------------------------------------
438 0002f3c5 leaf_length 2, crc 62405
43c 0001f200 company_id 0001f2 |
440 000902c7 device_id 00000902c7 | EUI-64 0001f200000902c7

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200523071733.170129-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: firewire-motu: refactoring protocol v3 for clock source getter

This commit splits the method to get clock source for protocol
version 3 so that model-dependent operations are expli

ALSA: firewire-motu: refactoring protocol v3 for clock source getter

This commit splits the method to get clock source for protocol
version 3 so that model-dependent operations are explicitly defined.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200519111641.123211-14-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: firewire-motu: remove obsoleted codes

The way to decide CIP payload size by calculation with any flag is now
obsoleted. This commit removes the codes.

Signed-off-by: Takas

ALSA: firewire-motu: remove obsoleted codes

The way to decide CIP payload size by calculation with any flag is now
obsoleted. This commit removes the codes.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200519111641.123211-12-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: firewire-motu: add alternative functions to detect packet format for protocol v3

This commit adds alternative functions to detect packet format so that
each function corresponds to

ALSA: firewire-motu: add alternative functions to detect packet format for protocol v3

This commit adds alternative functions to detect packet format so that
each function corresponds to each model.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200519111641.123211-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: firewire-motu: add model-specific table of chunk count

In MOTU protocol, data block consists of SPH and 24-bit chunks
aligned to quadlet. The number of chunks per data block is spe

ALSA: firewire-motu: add model-specific table of chunk count

In MOTU protocol, data block consists of SPH and 24-bit chunks
aligned to quadlet. The number of chunks per data block is specific
to model. For models with optical interface, the number differs
depending on I/O settings for the interface (ADAT, TOSLINK).

Currently the number is calculated from flags in model-specific
data. However this is weak in the case that the model has quirks.
Actually, for quirks of some models, flags are used against their
original meanings.

This commit adds model-specific table of chunk count. For future
integration, this table is based on the calculation.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200519111641.123211-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: firewire-motu: drop protocol structure

Now protocol structure becomes useless. This commit drops it.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https:

ALSA: firewire-motu: drop protocol structure

Now protocol structure becomes useless. This commit drops it.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200519111641.123211-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: firewire-motu: add wrapper functions for protocol-dependent operations

This commit adds helper functions which wraps function call for each
protocol.

Signed-off-by: Takash

ALSA: firewire-motu: add wrapper functions for protocol-dependent operations

This commit adds helper functions which wraps function call for each
protocol.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200519111641.123211-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: firewire-motu: localize protocol data

This commit adds enumerations of protocol version to localize protocol
data.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp

ALSA: firewire-motu: localize protocol data

This commit adds enumerations of protocol version to localize protocol
data.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200519111641.123211-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: firewire-motu: move spec data to v3 protocol file

The most of members in spec data is used in each protocol file. It's
better to capsulate the data to the file.

This commi

ALSA: firewire-motu: move spec data to v3 protocol file

The most of members in spec data is used in each protocol file. It's
better to capsulate the data to the file.

This commit moves the data to the file for protocol version 3.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20200519111641.123211-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: firewire-motu: detect SPH source of sampling clock

In MOTU FireWire series, devices have a mode to generate sampling clock
from a sequence of source packet header (SPH) included in

ALSA: firewire-motu: detect SPH source of sampling clock

In MOTU FireWire series, devices have a mode to generate sampling clock
from a sequence of source packet header (SPH) included in each data block
of received packet. This mode is used for several purposes such as mode
for SMPTE time code, sync to the other sound cards and so on.

This commit adds support for the SPH mode.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191030080644.1704-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: firewire-motu: fix wrong spelling for macro

Just replace 'SEPARETED' with 'SEPARATED' for macro.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lo

ALSA: firewire-motu: fix wrong spelling for macro

Just replace 'SEPARETED' with 'SEPARATED' for macro.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191030080644.1704-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 345

Based on 1 normalized pattern(s):

licensed under the terms of the gnu general public license version 2

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 345

Based on 1 normalized pattern(s):

licensed under the terms of the gnu general public license version 2

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 88 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000437.521539229@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

ALSA: firewire-motu: add a flag for AES/EBU on XLR interface

MOTU Traveler supports AES/EBU on XLR interface and data block of rx/tx
packet includes two chunk for the interface. This com

ALSA: firewire-motu: add a flag for AES/EBU on XLR interface

MOTU Traveler supports AES/EBU on XLR interface and data block of rx/tx
packet includes two chunk for the interface. This commit adds a flag
for this purpose.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: firewire-motu: add a flag for chunks for main 1/2 out

This driver explicitly assumes that all of supported models have main data
chunk separated from chunk for analog ports. Howeve

ALSA: firewire-motu: add a flag for chunks for main 1/2 out

This driver explicitly assumes that all of supported models have main data
chunk separated from chunk for analog ports. However, MOTU Traveler doesn't
support the separated main data chunk.

This commit adds a flag for the separated main data chunk.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: firewire-motu: add specification flag for position of flag for MIDI messages

In protocols of MOTU FireWire series, when transferring MIDI messages,
transmitter set existence flag t

ALSA: firewire-motu: add specification flag for position of flag for MIDI messages

In protocols of MOTU FireWire series, when transferring MIDI messages,
transmitter set existence flag to one byte on first several quadlets. The
position differs depending on protocols and models, however two cases are
confirmed; in 5th byte and 8th byte from MSB side.

This commit adds a series of specification flag to describe them. When
the existence flag is in the 5th byte, SND_MOTU_SPEC_[R|T]X_MIDI_2ND_Q is
used. Else, another set of the flag is used. Here, '_Q' means quadlet.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: firewire-motu: remove invalid bitshift for register value

In protocol version 3, drivers can read current sampling clock status from
register 0x'ffff'f000'0b14. 8 bits of LSB of th

ALSA: firewire-motu: remove invalid bitshift for register value

In protocol version 3, drivers can read current sampling clock status from
register 0x'ffff'f000'0b14. 8 bits of LSB of this register represents type
of signal as source of clock.

Current driver code includes invalid bitshift to handle the parameter. This
commit fixes the bug.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 5992e30034c4 ("ALSA: firewire-motu: add support for MOTU 828mk3 (FireWire/Hybrid) as a model with protocol version 3")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: firewire-motu: add support for MOTU 828mk3 (FireWire/Hybrid) as a model with protocol version 3

MOTU 828mk3 (FireWire/Hybrid) is one of third generation in MOTU FireWire
series, pr

ALSA: firewire-motu: add support for MOTU 828mk3 (FireWire/Hybrid) as a model with protocol version 3

MOTU 828mk3 (FireWire/Hybrid) is one of third generation in MOTU FireWire
series, produced in 2008/2014. This model consists of three chips for
functionality on IEEE 1394 bus:

* TI TSB41AB2 (Physical layer for IEEE 1394 bus)
* Xilinx Spartan-3E FPGA Family (Link layer for IEEE 1394 bus, packet
processing and data block processing layer)
* TI TMS320C6722 (Digital signal processing)

This commit adds a support for this model, with its unique protocol as
version 3. This protocol has some additional features to protocol
version 2.

* Support several optical interfaces.
* Support a data chunk for return of reverb effect.
* Have a quirk of tx packets.
* Support heartbeat asynchronous transaction.

In this protocol, series of transferred packets has some quirks. Below
fields in CIP headers of the packets are out of IEC 61883-1:
- SID (source node id): always 0x0d
- DBS (data block size): always 0x04
- DBC (data block counter): always 0x00
- EOH (End of header): always 0x00

Below is an actual sample of transferred packets.

quads CIP1 CIP2
520 0x0D040400 0x22FFFFFF
8 0x0D040400 0x22FFFFFF
520 0x0D040400 0x22FFFFFF
520 0x0D040400 0x22FFFFFF
8 0x0D040400 0x22FFFFFF

Status of clock is configured by write transactions to 0x'ffff'f000'0b14,
as well as version 2, while meanings of fields are different from the
former protocols. Modes of optical interfaces are configured by write
transactions to 0x'ffff'f000'0c94.

Drivers can register its address to receive heatbeat transactions from the
unit. 0x'ffff'f000'0b0c is for the higher part and 0x'ffff'f000'0b10 is
for the lower part. Nevertheless, this feature is not useless for this
driver and this commit omits it.

Each data block consists of two parts in a point of the number of included
data chunks. In both of 'fixed' and 'differed' parts, the number of
included data blocks are a multiple of 4, thus depending on models there's
some empty data chunks. For example, 828mk3 includes one pair of empty
data chunks in its fixed part. When optical interface is configured to
S/PDIF, 828mk3 includes one pair of empty data chunks in its differed part.
To reduce consumption of CPU cycles with additional conditions/loops, this
commit just exposes these empty chunks to user space as PCM channels.

Additionally, 828mk3 has a non-negligible overhead to change its sampling
transfer frequency. When softwares send asynchronous transaction to
perform it, LED on the unit starts to blink. In a worst case, it continues
blink during several seconds; e.g. 10 seconds. When stopping blinking,
the unit seems to be prepared for the requested sampling transfer
frequency. To wait for the preparation, this commit forces the driver
to call task scheduler and applications sleeps for 4 seconds.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...