|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46 |
|
| #
68501d3c |
| 11-Aug-2023 |
Apurva Nandan <a-nandan@ti.com> |
arm64: dts: ti: k3-am69-sk: Add phase tags marking
bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT.
That's why add it also to Linux t
arm64: dts: ti: k3-am69-sk: Add phase tags marking
bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT.
That's why add it also to Linux to be aligned with bootloader requirement.
wkup_i2c0, mcu_uart0, main_uart8, main_sdhci0 and main_sdhci1 are required
for bootloader operation on TI K3 AM69-SK EVM. These IPs along with
pinmuxes need to be marked for all bootloader phases, hence add bootph-all
to these nodes in kernel dts.
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230811192030.3480616-4-a-nandan@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
show more ...
|
|
Revision tags: v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35 |
|
| #
a4956811 |
| 15-Jun-2023 |
Tony Lindgren <tony@atomide.com> |
arm64: dts: ti: Unify pin group node names for make dtbs checks
Prepare for pinctrl-single yaml binding and unify pin group node names.
Let's standardize on pin group node naming ending in -pins. A
arm64: dts: ti: Unify pin group node names for make dtbs checks
Prepare for pinctrl-single yaml binding and unify pin group node names.
Let's standardize on pin group node naming ending in -pins. As we don't
necessarily have a SoC specific compatible property for pinctrl-single.
I'd rather not add a pattern match for pins somewhere in the name for all
the users.
Trying to add matches for pins-default will be futile as on the earlier
SoCs we've already seen names like pins-sleep, pins-idle, pins-off and so
on that would need to be matched.
And as the node is a pin group, let's prefer to use naming -pins rather
than -pin as more pins may need to be added to the pin group later on.
Signed-off-by: Tony Lindgren <tony@atomide.com>
[vigneshr@ti.com: Rebase onto latest ti/next and extend to new nodes]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
show more ...
|
|
Revision tags: v6.1.34, v6.1.33, v6.1.32 |
|
| #
0ec1a48d |
| 02-Jun-2023 |
Dasnavis Sabiya <sabiya.d@ti.com> |
arm64: dts: ti: k3-am69-sk: Add pinmux for RPi Header
Add pinmux required to bring out the i2c and gpios on 40 pin RPi
expansion header on AM69 SK board.
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti
arm64: dts: ti: k3-am69-sk: Add pinmux for RPi Header
Add pinmux required to bring out the i2c and gpios on 40 pin RPi
expansion header on AM69 SK board.
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230602214937.2349545-9-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
show more ...
|
| #
08ae12b6 |
| 02-Jun-2023 |
Nishanth Menon <nm@ti.com> |
arm64: dts: ti: k3-am69-sk: Enable wakeup_i2c0 and eeprom
Enable wakeup_i2c and use un-used pinmux. While at it, describe the
board detection eeprom present on the board.
Signed-off-by: Nishanth Me
arm64: dts: ti: k3-am69-sk: Enable wakeup_i2c0 and eeprom
Enable wakeup_i2c and use un-used pinmux. While at it, describe the
board detection eeprom present on the board.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230602214937.2349545-8-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
show more ...
|
| #
45299dd1 |
| 02-Jun-2023 |
Nishanth Menon <nm@ti.com> |
arm64: dts: ti: k3-am69-sk: Add mcu and wakeup uarts
Add wakeup and MCU uart. This allows the device tree usage in
bootloader and firmwares that can configure the same appropriately.
Signed-off-by:
arm64: dts: ti: k3-am69-sk: Add mcu and wakeup uarts
Add wakeup and MCU uart. This allows the device tree usage in
bootloader and firmwares that can configure the same appropriately.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230602214937.2349545-7-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
show more ...
|
| #
7b72bd25 |
| 02-Jun-2023 |
Nishanth Menon <nm@ti.com> |
arm64: dts: ti: k3-am69-sk: Enable mcu network port
Enable networking for NFS and basic networking functionality.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
arm64: dts: ti: k3-am69-sk: Enable mcu network port
Enable networking for NFS and basic networking functionality.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230602214937.2349545-6-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
show more ...
|
| #
b38c6ced |
| 02-Jun-2023 |
Nishanth Menon <nm@ti.com> |
arm64: dts: ti: k3-am69-sk: Fix main_i2c0 alias
main_i2c0 is aliased as i2c0 which creates a problem for u-boot R5
SPL attempting to reuse the same definition in the common board
detection logic as
arm64: dts: ti: k3-am69-sk: Fix main_i2c0 alias
main_i2c0 is aliased as i2c0 which creates a problem for u-boot R5
SPL attempting to reuse the same definition in the common board
detection logic as it looks for the first i2c instance as the bus on
which to detect the eeprom to understand the board variant involved.
Switch main_i2c0 to i2c3 alias allowing us to introduce wkup_i2c0
and potentially space for mcu_i2c instances in the gap for follow on
patches.
Fixes: 635fb18ba008 ("arch: arm64: dts: Add support for AM69 Starter Kit")
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20230602214937.2349545-5-nm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
show more ...
|
| #
74428680 |
| 05-Jun-2023 |
Dasnavis Sabiya <sabiya.d@ti.com> |
arm64: dts: ti: k3-am69-sk: Add eMMC mmc0 support
Add support for eMMC card connected to main sdhci0 instance.
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.co
arm64: dts: ti: k3-am69-sk: Add eMMC mmc0 support
Add support for eMMC card connected to main sdhci0 instance.
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20230605174551.160262-1-sabiya.d@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
show more ...
|
|
Revision tags: v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8 |
|
| #
635fb18b |
| 19-Jan-2023 |
Dasnavis Sabiya <sabiya.d@ti.com> |
arch: arm64: dts: Add support for AM69 Starter Kit
AM69 Starter Kit is a single board designed for TI AM69 SOC that
provides advanced system integration in automotive ADAS applications,
autonomous m
arch: arm64: dts: Add support for AM69 Starter Kit
AM69 Starter Kit is a single board designed for TI AM69 SOC that
provides advanced system integration in automotive ADAS applications,
autonomous mobile robot and edge AI applications. The SOC comprises
of Cortex-A72s in dual clusters, lockstep capable dual Cortex-R5F MCUs,
Vision Processing Accelerators (VPAC) with Image Signal Processor (ISP)
and multiple vision assist accelerators, Depth and Motion Processing
Accelerators (DMPAC), Deep-learning Matrix Multiply Accelerator(MMA)
and C7x floating point vector DSP
AM69 SK supports the following interfaces:
* 32 GB LPDDR4 RAM
* x1 Gigabit Ethernet interface
* x3 USB 3.0 Type-A ports
* x1 USB 3.0 Type-C port
* x1 UHS-1 capable micro-SD card slot
* x4 MCAN instances
* 32 GB eMMC Flash
* 512 Mbit OSPI flash
* x2 Display connectors
* x1 PCIe M.2 M Key
* x1 PCIe M.2 E Key
* x1 4L PCIe Card Slot
* x3 CSI2 Camera interface
* 40-pin Raspberry Pi header
Add initial support for the AM69 SK board.
Design Files: https://www.ti.com/lit/zip/SPRR466
TRM: https://www.ti.com/lit/zip/spruj52
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230119132958.124435-3-sabiya.d@ti.com
show more ...
|