mm/madvise: make MADV_POPULATE_(READ|WRITE) handle VM_FAULT_RETRY properly

[ Upstream commit 631426ba1d45a8672b177ee85ad4cabe760dd131 ]

Darrick reports that in some cases where pread() would fail w

mm/madvise: make MADV_POPULATE_(READ|WRITE) handle VM_FAULT_RETRY properly

[ Upstream commit 631426ba1d45a8672b177ee85ad4cabe760dd131 ]

Darrick reports that in some cases where pread() would fail with -EIO and
mmap()+access would generate a SIGBUS signal, MADV_POPULATE_READ /
MADV_POPULATE_WRITE will keep retrying forever and not fail with -EFAULT.

While the madvise() call can be interrupted by a signal, this is not the
desired behavior. MADV_POPULATE_READ / MADV_POPULATE_WRITE should behave
like page faults in that case: fail and not retry forever.

A reproducer can be found at [1].

The reason is that __get_user_pages(), as called by
faultin_vma_page_range(), will not handle VM_FAULT_RETRY in a proper way:
it will simply return 0 when VM_FAULT_RETRY happened, making
madvise_populate()->faultin_vma_page_range() retry again and again, never
setting FOLL_TRIED->FAULT_FLAG_TRIED for __get_user_pages().

__get_user_pages_locked() does what we want, but duplicating that logic in
faultin_vma_page_range() feels wrong.

So let's use __get_user_pages_locked() instead, that will detect
VM_FAULT_RETRY and set FOLL_TRIED when retrying, making the fault handler
return VM_FAULT_SIGBUS (VM_FAULT_ERROR) at some point, propagating -EFAULT
from faultin_page() to __get_user_pages(), all the way to
madvise_populate().

But, there is an issue: __get_user_pages_locked() will end up re-taking
the MM lock and then __get_user_pages() will do another VMA lookup. In
the meantime, the VMA layout could have changed and we'd fail with
different error codes than we'd want to.

As __get_user_pages() will currently do a new VMA lookup either way, let
it do the VMA handling in a different way, controlled by a new
FOLL_MADV_POPULATE flag, effectively moving these checks from
madvise_populate() + faultin_page_range() in there.

With this change, Darricks reproducer properly fails with -EFAULT, as
documented for MADV_POPULATE_READ / MADV_POPULATE_WRITE.

[1] https://lore.kernel.org/all/20240313171936.GN1927156@frogsfrogsfrogs/

Link: https://lkml.kernel.org/r/20240314161300.382526-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240314161300.382526-2-david@redhat.com
Fixes: 4ca9b3859dac ("mm/madvise: introduce MADV_POPULATE_(READ|WRITE) to prefault page tables")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Darrick J. Wong <djwong@kernel.org>
Closes: https://lore.kernel.org/all/20240311223815.GW1927156@frogsfrogsfrogs/
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

mm/madvise: make MADV_POPULATE_(READ|WRITE) handle VM_FAULT_RETRY properly

[ Upstream commit 631426ba1d45a8672b177ee85ad4cabe760dd131 ]

Darrick reports that in some cases where pread() would fail w

mm/madvise: make MADV_POPULATE_(READ|WRITE) handle VM_FAULT_RETRY properly

[ Upstream commit 631426ba1d45a8672b177ee85ad4cabe760dd131 ]

Darrick reports that in some cases where pread() would fail with -EIO and
mmap()+access would generate a SIGBUS signal, MADV_POPULATE_READ /
MADV_POPULATE_WRITE will keep retrying forever and not fail with -EFAULT.

While the madvise() call can be interrupted by a signal, this is not the
desired behavior. MADV_POPULATE_READ / MADV_POPULATE_WRITE should behave
like page faults in that case: fail and not retry forever.

A reproducer can be found at [1].

The reason is that __get_user_pages(), as called by
faultin_vma_page_range(), will not handle VM_FAULT_RETRY in a proper way:
it will simply return 0 when VM_FAULT_RETRY happened, making
madvise_populate()->faultin_vma_page_range() retry again and again, never
setting FOLL_TRIED->FAULT_FLAG_TRIED for __get_user_pages().

__get_user_pages_locked() does what we want, but duplicating that logic in
faultin_vma_page_range() feels wrong.

So let's use __get_user_pages_locked() instead, that will detect
VM_FAULT_RETRY and set FOLL_TRIED when retrying, making the fault handler
return VM_FAULT_SIGBUS (VM_FAULT_ERROR) at some point, propagating -EFAULT
from faultin_page() to __get_user_pages(), all the way to
madvise_populate().

But, there is an issue: __get_user_pages_locked() will end up re-taking
the MM lock and then __get_user_pages() will do another VMA lookup. In
the meantime, the VMA layout could have changed and we'd fail with
different error codes than we'd want to.

As __get_user_pages() will currently do a new VMA lookup either way, let
it do the VMA handling in a different way, controlled by a new
FOLL_MADV_POPULATE flag, effectively moving these checks from
madvise_populate() + faultin_page_range() in there.

With this change, Darricks reproducer properly fails with -EFAULT, as
documented for MADV_POPULATE_READ / MADV_POPULATE_WRITE.

[1] https://lore.kernel.org/all/20240313171936.GN1927156@frogsfrogsfrogs/

Link: https://lkml.kernel.org/r/20240314161300.382526-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240314161300.382526-2-david@redhat.com
Fixes: 4ca9b3859dac ("mm/madvise: introduce MADV_POPULATE_(READ|WRITE) to prefault page tables")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Darrick J. Wong <djwong@kernel.org>
Closes: https://lore.kernel.org/all/20240311223815.GW1927156@frogsfrogsfrogs/
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

mm/madvise: make MADV_POPULATE_(READ|WRITE) handle VM_FAULT_RETRY properly

[ Upstream commit 631426ba1d45a8672b177ee85ad4cabe760dd131 ]

Darrick reports that in some cases where pread() would fail w

mm/madvise: make MADV_POPULATE_(READ|WRITE) handle VM_FAULT_RETRY properly

[ Upstream commit 631426ba1d45a8672b177ee85ad4cabe760dd131 ]

Darrick reports that in some cases where pread() would fail with -EIO and
mmap()+access would generate a SIGBUS signal, MADV_POPULATE_READ /
MADV_POPULATE_WRITE will keep retrying forever and not fail with -EFAULT.

While the madvise() call can be interrupted by a signal, this is not the
desired behavior. MADV_POPULATE_READ / MADV_POPULATE_WRITE should behave
like page faults in that case: fail and not retry forever.

A reproducer can be found at [1].

The reason is that __get_user_pages(), as called by
faultin_vma_page_range(), will not handle VM_FAULT_RETRY in a proper way:
it will simply return 0 when VM_FAULT_RETRY happened, making
madvise_populate()->faultin_vma_page_range() retry again and again, never
setting FOLL_TRIED->FAULT_FLAG_TRIED for __get_user_pages().

__get_user_pages_locked() does what we want, but duplicating that logic in
faultin_vma_page_range() feels wrong.

So let's use __get_user_pages_locked() instead, that will detect
VM_FAULT_RETRY and set FOLL_TRIED when retrying, making the fault handler
return VM_FAULT_SIGBUS (VM_FAULT_ERROR) at some point, propagating -EFAULT
from faultin_page() to __get_user_pages(), all the way to
madvise_populate().

But, there is an issue: __get_user_pages_locked() will end up re-taking
the MM lock and then __get_user_pages() will do another VMA lookup. In
the meantime, the VMA layout could have changed and we'd fail with
different error codes than we'd want to.

As __get_user_pages() will currently do a new VMA lookup either way, let
it do the VMA handling in a different way, controlled by a new
FOLL_MADV_POPULATE flag, effectively moving these checks from
madvise_populate() + faultin_page_range() in there.

With this change, Darricks reproducer properly fails with -EFAULT, as
documented for MADV_POPULATE_READ / MADV_POPULATE_WRITE.

[1] https://lore.kernel.org/all/20240313171936.GN1927156@frogsfrogsfrogs/

Link: https://lkml.kernel.org/r/20240314161300.382526-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240314161300.382526-2-david@redhat.com
Fixes: 4ca9b3859dac ("mm/madvise: introduce MADV_POPULATE_(READ|WRITE) to prefault page tables")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Darrick J. Wong <djwong@kernel.org>
Closes: https://lore.kernel.org/all/20240311223815.GW1927156@frogsfrogsfrogs/
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

swap: remove remnants of polling from read_swap_cache_async

Patch series "Per-VMA lock support for swap and userfaults", v7.

When per-VMA locks were introduced in [1] several types of page faults
w

swap: remove remnants of polling from read_swap_cache_async

Patch series "Per-VMA lock support for swap and userfaults", v7.

When per-VMA locks were introduced in [1] several types of page faults
would still fall back to mmap_lock to keep the patchset simple. Among
them are swap and userfault pages. The main reason for skipping those
cases was the fact that mmap_lock could be dropped while handling these
faults and that required additional logic to be implemented. Implement
the mechanism to allow per-VMA locks to be dropped for these cases.

First, change handle_mm_fault to drop per-VMA locks when returning
VM_FAULT_RETRY or VM_FAULT_COMPLETED to be consistent with the way
mmap_lock is handled. Then change folio_lock_or_retry to accept vm_fault
and return vm_fault_t which simplifies later patches. Finally allow swap
and uffd page faults to be handled under per-VMA locks by dropping per-VMA
and retrying, the same way it's done under mmap_lock. Naturally, once VMA
lock is dropped that VMA should be assumed unstable and can't be used.


This patch (of 6):

Commit [1] introduced IO polling support duding swapin to reduce swap read
latency for block devices that can be polled. However later commit [2]
removed polling support. Therefore it seems safe to remove do_poll
parameter in read_swap_cache_async and always call swap_readpage with
synchronous=false waiting for IO completion in folio_lock_or_retry.

[1] commit 23955622ff8d ("swap: add block io poll in swapin path")
[2] commit 9650b453a3d4 ("block: ignore RWF_HIPRI hint for sync dio")

Link: https://lkml.kernel.org/r/20230630211957.1341547-1-surenb@google.com
Link: https://lkml.kernel.org/r/20230630211957.1341547-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

madvise:madvise_free_pte_range(): don't use mapcount() against large folio for sharing check

Commit 98b211d6415f ("madvise: convert madvise_free_pte_range() to use a
folio") replaced the page_mapcou

madvise:madvise_free_pte_range(): don't use mapcount() against large folio for sharing check

Commit 98b211d6415f ("madvise: convert madvise_free_pte_range() to use a
folio") replaced the page_mapcount() with folio_mapcount() to check
whether the folio is shared by other mapping.

It's not correct for large folios. folio_mapcount() returns the total
mapcount of large folio which is not suitable to detect whether the folio
is shared.

Use folio_estimated_sharers() which returns a estimated number of shares.
That means it's not 100% correct. It should be OK for madvise case here.

User-visible effects is that the THP is skipped when user call madvise.
But the correct behavior is THP should be split and processed then.

NOTE: this change is a temporary fix to reduce the user-visible effects
before the long term fix from David is ready.

Link: https://lkml.kernel.org/r/20230808020917.2230692-4-fengwei.yin@intel.com
Fixes: 98b211d6415f ("madvise: convert madvise_free_pte_range() to use a folio")
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

madvise:madvise_cold_or_pageout_pte_range(): don't use mapcount() against large folio for sharing check

Patch series "don't use mapcount() to check large folio sharing", v2.

In madvise_cold_or_page

madvise:madvise_cold_or_pageout_pte_range(): don't use mapcount() against large folio for sharing check

Patch series "don't use mapcount() to check large folio sharing", v2.

In madvise_cold_or_pageout_pte_range() and madvise_free_pte_range(),
folio_mapcount() is used to check whether the folio is shared. But it's
not correct as folio_mapcount() returns total mapcount of large folio.

Use folio_estimated_sharers() here as the estimated number is enough.

This patchset will fix the cases:
User space application call madvise() with MADV_FREE, MADV_COLD and
MADV_PAGEOUT for specific address range. There are THP mapped to the
range. Without the patchset, the THP is skipped. With the patch, the
THP will be split and handled accordingly.

David reported the cow self test skip some cases because of MADV_PAGEOUT
skip THP:
https://lore.kernel.org/linux-mm/9e92e42d-488f-47db-ac9d-75b24cd0d037@intel.com/T/#mbf0f2ec7fbe45da47526de1d7036183981691e81
and I confirmed this patchset make it work again.


This patch (of 3):

Commit 07e8c82b5eff ("madvise: convert madvise_cold_or_pageout_pte_range()
to use folios") replaced the page_mapcount() with folio_mapcount() to
check whether the folio is shared by other mapping.

It's not correct for large folio. folio_mapcount() returns the total
mapcount of large folio which is not suitable to detect whether the folio
is shared.

Use folio_estimated_sharers() which returns a estimated number of shares.
That means it's not 100% correct. It should be OK for madvise case here.

User-visible effects is that the THP is skipped when user call madvise.
But the correct behavior is THP should be split and processed then.

NOTE: this change is a temporary fix to reduce the user-visible effects
before the long term fix from David is ready.

Link: https://lkml.kernel.org/r/20230808020917.2230692-1-fengwei.yin@intel.com
Link: https://lkml.kernel.org/r/20230808020917.2230692-2-fengwei.yin@intel.com
Fixes: 07e8c82b5eff ("madvise: convert madvise_cold_or_pageout_pte_range() to use folios")
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

mm: lock vma explicitly before doing vm_flags_reset and vm_flags_reset_once

Implicit vma locking inside vm_flags_reset() and vm_flags_reset_once() is
not obvious and makes it hard to understand wher

mm: lock vma explicitly before doing vm_flags_reset and vm_flags_reset_once

Implicit vma locking inside vm_flags_reset() and vm_flags_reset_once() is
not obvious and makes it hard to understand where vma locking is happening.
Also in some cases (like in dup_userfaultfd()) vma should be locked earlier
than vma_flags modification. To make locking more visible, change these
functions to assert that the vma write lock is taken and explicitly lock
the vma beforehand. Fix userfaultfd functions which should lock the vma
earlier.

Link: https://lkml.kernel.org/r/20230804152724.3090321-5-surenb@google.com
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

mm: enable page walking API to lock vmas during the walk

walk_page_range() and friends often operate under write-locked mmap_lock.
With introduction of vma locks, the vmas have to be locked as well

mm: enable page walking API to lock vmas during the walk

walk_page_range() and friends often operate under write-locked mmap_lock.
With introduction of vma locks, the vmas have to be locked as well during
such walks to prevent concurrent page faults in these areas. Add an
additional member to mm_walk_ops to indicate locking requirements for the
walk.

The change ensures that page walks which prevent concurrent page faults
by write-locking mmap_lock, operate correctly after introduction of
per-vma locks. With per-vma locks page faults can be handled under vma
lock without taking mmap_lock at all, so write locking mmap_lock would
not stop them. The change ensures vmas are properly locked during such
walks.

A sample issue this solves is do_mbind() performing queue_pages_range()
to queue pages for migration. Without this change a concurrent page
can be faulted into the area and be left out of migration.

Link: https://lkml.kernel.org/r/20230804152724.3090321-2-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Suggested-by: Jann Horn <jannh@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

mm: make PTE_MARKER_SWAPIN_ERROR more general

Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD",
v4.

This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4
fo

mm: make PTE_MARKER_SWAPIN_ERROR more general

Patch series "add UFFDIO_POISON to simulate memory poisoning with UFFD",
v4.

This series adds a new userfaultfd feature, UFFDIO_POISON. See commit 4
for a detailed description of the feature.


This patch (of 8):

Future patches will reuse PTE_MARKER_SWAPIN_ERROR to implement
UFFDIO_POISON, so make some various preparations for that:

First, rename it to just PTE_MARKER_POISONED. The "SWAPIN" can be
confusing since we're going to re-use it for something not really related
to swap. This can be particularly confusing for things like hugetlbfs,
which doesn't support swap whatsoever. Also rename some various helper
functions.

Next, fix pte marker copying for hugetlbfs. Previously, it would WARN on
seeing a PTE_MARKER_SWAPIN_ERROR, since hugetlbfs doesn't support swap.
But, since we're going to re-use it, we want it to go ahead and copy it
just like non-hugetlbfs memory does today. Since the code to do this is
more complicated now, pull it out into a helper which can be re-used in
both places. While we're at it, also make it slightly more explicit in
its handling of e.g. uffd wp markers.

For non-hugetlbfs page faults, instead of returning VM_FAULT_SIGBUS for an
error entry, return VM_FAULT_HWPOISON. For most cases this change doesn't
matter, e.g. a userspace program would receive a SIGBUS either way. But
for UFFDIO_POISON, this change will let KVM guests get an MCE out of the
box, instead of giving a SIGBUS to the hypervisor and requiring it to
somehow inject an MCE.

Finally, for hugetlbfs faults, handle PTE_MARKER_POISONED, and return
VM_FAULT_HWPOISON_LARGE in such cases. Note that this can't happen today
because the lack of swap support means we'll never end up with such a PTE
anyway, but this behavior will be needed once such entries *can* show up
via UFFDIO_POISON.

Link: https://lkml.kernel.org/r/20230707215540.2324998-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20230707215540.2324998-2-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: T.J. Alumbaugh <talumbau@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

mm: madvise: fix uneven accounting of psi

A folio turns into a Workingset during:
1) shrink_active_list() placing the folio from active to inactive list.
2) When a workingset transition is happening

mm: madvise: fix uneven accounting of psi

A folio turns into a Workingset during:
1) shrink_active_list() placing the folio from active to inactive list.
2) When a workingset transition is happening during the folio refault.

And when Workingset is set on a folio, PSI for memory can be accounted
during a) That folio is being reclaimed and b) Refault of that folio,
for usual reclaims.

This accounting of PSI for memory is not consistent for reclaim +
refault operation between usual reclaim and madvise(COLD/PAGEOUT) which
deactivate or proactively reclaim a folio:
a) A folio started at inactive and moved to active as part of accesses.
Workingset is absent on the folio thus refault of it when reclaimed
through MADV_PAGEOUT operation doesn't account for PSI.

b) When the same folio transition from inactive->active and then to
inactive through shrink_active_list(). Workingset is set on the folio
thus refault of it when reclaimed through MADV_PAGEOUT operation
accounts for PSI.

c) When the same folio is part of active list directly as a result of
folio refault and this was a workingset folio prior to eviction.
Workingset is set on the folio thus the refault of it when reclaimed
through MADV_PAGEOUT/MADV_COLD operation accounts for PSI.

d) MADV_COLD transfers the folio from active list to inactive
list. Such folios may not have the Workingset thus refault operation on
such folio doesn't account for PSI.

As said above, refault operation caused because of MADV_PAGEOUT on a
folio is accounts for memory PSI in b) and c) but not in a). Refault
caused by the reclaim of a folio on which MADV_COLD is performed
accounts memory PSI in c) but not in d). These behaviours are
inconsistent w.r.t usual reclaim + refault operation. Make this PSI
accounting always consistent by turning a folio into a workingset one
whenever it is leaving the active list. Also, accounting of PSI on a
folio whenever it leaves the active list as part of the
MADV_COLD/PAGEOUT operation helps the users whether they are operating
on proper folios[1].

[1] https://lore.kernel.org/all/20230605180013.GD221380@cmpxchg.org/

Link: https://lkml.kernel.org/r/1688393201-11135-1-git-send-email-quic_charante@quicinc.com
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Suggested-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: Sai Manobhiram Manapragada <quic_smanapra@quicinc.com>
Reported-by: Pavan Kondeti <quic_pkondeti@quicinc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

mm: ptep_get() conversion

Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(

mm: ptep_get() conversion

Convert all instances of direct pte_t* dereferencing to instead use
ptep_get() helper. This means that by default, the accesses change from a
C dereference to a READ_ONCE(). This is technically the correct thing to
do since where pgtables are modified by HW (for access/dirty) they are
volatile and therefore we should always ensure READ_ONCE() semantics.

But more importantly, by always using the helper, it can be overridden by
the architecture to fully encapsulate the contents of the pte. Arch code
is deliberately not converted, as the arch code knows best. It is
intended that arch code (arm64) will override the default with its own
implementation that can (e.g.) hide certain bits from the core code, or
determine young/dirty status by mixing in state from another source.

Conversion was done using Coccinelle:

----

// $ make coccicheck \
// COCCI=ptepget.cocci \
// SPFLAGS="--include-headers" \
// MODE=patch

virtual patch

@ depends on patch @
pte_t *v;
@@

- *v
+ ptep_get(v)

----

Then reviewed and hand-edited to avoid multiple unnecessary calls to
ptep_get(), instead opting to store the result of a single call in a
variable, where it is correct to do so. This aims to negate any cost of
READ_ONCE() and will benefit arch-overrides that may be more complex.

Included is a fix for an issue in an earlier version of this patch that
was pointed out by kernel test robot. The issue arose because config
MMU=n elides definition of the ptep helper functions, including
ptep_get(). HUGETLB_PAGE=n configs still define a simple
huge_ptep_clear_flush() for linking purposes, which dereferences the ptep.
So when both configs are disabled, this caused a build error because
ptep_get() is not defined. Fix by continuing to do a direct dereference
when MMU=n. This is safe because for this config the arch code cannot be
trying to virtualize the ptes because none of the ptep helpers are
defined.

Link: https://lkml.kernel.org/r/20230612151545.3317766-4-ryan.roberts@arm.com
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305120142.yXsNEo6H-lkp@intel.com/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Dimitri Sivanich <dimitri.sivanich@hpe.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: SeongJae Park <sj@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

mm/madvise: clean up force_shm_swapin_readahead()

Some nearby MADV_WILLNEED cleanup unrelated to pte_offset_map_lock().
shmem_swapin_range() is a better name than force_shm_swapin_readahead().
Fix

mm/madvise: clean up force_shm_swapin_readahead()

Some nearby MADV_WILLNEED cleanup unrelated to pte_offset_map_lock().
shmem_swapin_range() is a better name than force_shm_swapin_readahead().
Fix unimportant off-by-one on end_index. Call the swp_entry_t "entry"
rather than "swap": either is okay, but entry is the name used elsewhere
in mm/madvise.c. Do not assume GFP_HIGHUSER_MOVABLE: that's right for
anon swap, but shmem should take gfp from mapping. Pass the actual vma
and address to read_swap_cache_async(), in case a NUMA mempolicy applies.
lru_add_drain() at outer level, like madvise_willneed()'s other branch.

Link: https://lkml.kernel.org/r/67e18875-ffb3-ec27-346-f350e07bed87@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zack Rusin <zackr@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

mm/madvise: clean up pte_offset_map_lock() scans

Came here to make madvise's several pte_offset_map_lock() scans advance to
next extent on failure, and remove superfluous pmd_trans_unstable() and
pm

mm/madvise: clean up pte_offset_map_lock() scans

Came here to make madvise's several pte_offset_map_lock() scans advance to
next extent on failure, and remove superfluous pmd_trans_unstable() and
pmd_none_or_trans_huge_or_clear_bad() calls. But also did some nearby
cleanup.

swapin_walk_pmd_entry(): don't name an address "index"; don't drop the
lock after every pte, only when calling out to read_swap_cache_async().

madvise_cold_or_pageout_pte_range() and madvise_free_pte_range(): prefer
"start_pte" for pointer, orig_pte usually denotes a saved pte value; leave
lazy MMU mode before unlocking; merge the success and failure paths after
split_folio().

Link: https://lkml.kernel.org/r/cc4d9a88-9da6-362-50d9-6735c2b125c6@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zack Rusin <zackr@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

mm/madvise: use vma_lookup() instead of find_vma()

Using vma_lookup() verifies the address is contained in the found vma.
This results in easier to read the code.

Link: https://lkml.kernel.org/r/2

mm/madvise: use vma_lookup() instead of find_vma()

Using vma_lookup() verifies the address is contained in the found vma.
This results in easier to read the code.

Link: https://lkml.kernel.org/r/20230404094515.1883552-1-zhangpeng362@huawei.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

iov_iter: add iter_iov_addr() and iter_iov_len() helpers

These just return the address and length of the current iovec segment
in the iterator. Convert existing iov_iter_iovec() users to use them
in

iov_iter: add iter_iov_addr() and iter_iov_len() helpers

These just return the address and length of the current iovec segment
in the iterator. Convert existing iov_iter_iovec() users to use them
instead of getting a copy of the current vec.

Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

mm: Introduce untagged_addr_remote()

untagged_addr() removes tags/metadata from the address and brings it to
the canonical form. The helper is implemented on arm64 and sparc. Both of
them do untaggi

mm: Introduce untagged_addr_remote()

untagged_addr() removes tags/metadata from the address and brings it to
the canonical form. The helper is implemented on arm64 and sparc. Both of
them do untagging based on global rules.

However, Linear Address Masking (LAM) on x86 introduces per-process
settings for untagging. As a result, untagged_addr() is now only
suitable for untagging addresses for the current proccess.

The new helper untagged_addr_remote() has to be used when the address
targets remote process. It requires the mmap lock for target mm to be
taken.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/all/20230312112612.31869-6-kirill.shutemov%40linux.intel.com

show more ...

mm: change to return bool for folio_isolate_lru()

Patch series "Change the return value for page isolation functions", v3.

Now the page isolation functions did not return a boolean to indicate
succ

mm: change to return bool for folio_isolate_lru()

Patch series "Change the return value for page isolation functions", v3.

Now the page isolation functions did not return a boolean to indicate
success or not, instead it will return a negative error when failed
to isolate a page. So below code used in most places seem a boolean
success/failure thing, which can confuse people whether the isolation
is successful.

if (folio_isolate_lru(folio))
continue;

Moreover the page isolation functions only return 0 or -EBUSY, and
most users did not care about the negative error except for few users,
thus we can convert all page isolation functions to return a boolean
value, which can remove the confusion to make code more clear.

No functional changes intended in this patch series.


This patch (of 4):

Now the folio_isolate_lru() did not return a boolean value to indicate
isolation success or not, however below code checking the return value can
make people think that it was a boolean success/failure thing, which makes
people easy to make mistakes (see the fix patch[1]).

if (folio_isolate_lru(folio))
continue;

Thus it's better to check the negative error value expilictly returned by
folio_isolate_lru(), which makes code more clear per Linus's
suggestion[2]. Moreover Matthew suggested we can convert the isolation
functions to return a boolean[3], since most users did not care about the
negative error value, and can also remove the confusing of checking return
value.

So this patch converts the folio_isolate_lru() to return a boolean value,
which means return 'true' to indicate the folio isolation is successful,
and 'false' means a failure to isolation. Meanwhile changing all users'
logic of checking the isolation state.

No functional changes intended.

[1] https://lore.kernel.org/all/20230131063206.28820-1-Kuan-Ying.Lee@mediatek.com/T/#u
[2] https://lore.kernel.org/all/CAHk-=wiBrY+O-4=2mrbVyxR+hOqfdJ=Do6xoucfJ9_5az01L4Q@mail.gmail.com/
[3] https://lore.kernel.org/all/Y+sTFqwMNAjDvxw3@casper.infradead.org/

Link: https://lkml.kernel.org/r/cover.1676424378.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/8a4e3679ed4196168efadf7ea36c038f2f7d5aa9.1676424378.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

mm: replace vma->vm_flags direct modifications with modifier calls

Replace direct modifications to vma->vm_flags with calls to modifier
functions to be able to track flag changes and to keep vma loc

mm: replace vma->vm_flags direct modifications with modifier calls

Replace direct modifications to vma->vm_flags with calls to modifier
functions to be able to track flag changes and to keep vma locking
correctness.

[akpm@linux-foundation.org: fix drivers/misc/open-dice.c, per Hyeonggon Yoo]
Link: https://lkml.kernel.org/r/20230126193752.297968-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Oskolkov <posk@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

madvise: use split_vma() instead of __split_vma()

The split_vma() wrapper is specifically for this use case, so use it.

[Liam.Howlett@oracle.com: fix VMA_ITERATOR start position]
Link: https://lk

madvise: use split_vma() instead of __split_vma()

The split_vma() wrapper is specifically for this use case, so use it.

[Liam.Howlett@oracle.com: fix VMA_ITERATOR start position]
Link: https://lkml.kernel.org/r/20230125135809.85262-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230120162650.984577-34-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

mm: switch vma_merge(), split_vma(), and __split_vma to vma iterator

Drop the vmi_* functions and transition all users to use the vma iterator
directly.

Link: https://lkml.kernel.org/r/202301201626

mm: switch vma_merge(), split_vma(), and __split_vma to vma iterator

Drop the vmi_* functions and transition all users to use the vma iterator
directly.

Link: https://lkml.kernel.org/r/20230120162650.984577-30-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

madvise: use vmi iterator for __split_vma() and vma_merge()

Use the vma iterator so that the iterator can be invalidated or updated to
avoid each caller doing so.

Link: https://lkml.kernel.org/r/20

madvise: use vmi iterator for __split_vma() and vma_merge()

Use the vma iterator so that the iterator can be invalidated or updated to
avoid each caller doing so.

Link: https://lkml.kernel.org/r/20230120162650.984577-24-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

mm: madvise: use vm_normal_folio() in madvise_free_pte_range()

There is already a vm_normal_folio(), use it to make
madvise_free_pte_range() only use a folio.

Link: https://lkml.kernel.org/r/202301

mm: madvise: use vm_normal_folio() in madvise_free_pte_range()

There is already a vm_normal_folio(), use it to make
madvise_free_pte_range() only use a folio.

Link: https://lkml.kernel.org/r/20230112124028.16964-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

mm/mmu_notifier: remove unused mmu_notifier_range_update_to_read_only export

mmu_notifier_range_update_to_read_only() was originally introduced in
commit c6d23413f81b ("mm/mmu_notifier:
mmu_notifier

mm/mmu_notifier: remove unused mmu_notifier_range_update_to_read_only export

mmu_notifier_range_update_to_read_only() was originally introduced in
commit c6d23413f81b ("mm/mmu_notifier:
mmu_notifier_range_update_to_read_only() helper") as an optimisation for
device drivers that know a range has only been mapped read-only. However
there are no users of this feature so remove it. As it is the only user
of the struct mmu_notifier_range.vma field remove that also.

Link: https://lkml.kernel.org/r/20230110025722.600912-1-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...

fs: port inode_owner_or_capable() to mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This

fs: port inode_owner_or_capable() to mnt_idmap

Convert to struct mnt_idmap.

Last cycle we merged the necessary infrastructure in
256c8aed2b42 ("fs: introduce dedicated idmap type for mounts").
This is just the conversion to struct mnt_idmap.

Currently we still pass around the plain namespace that was attached to a
mount. This is in general pretty convenient but it makes it easy to
conflate namespaces that are relevant on the filesystem with namespaces
that are relevent on the mount level. Especially for non-vfs developers
without detailed knowledge in this area this can be a potential source for
bugs.

Once the conversion to struct mnt_idmap is done all helpers down to the
really low-level helpers will take a struct mnt_idmap argument instead of
two namespace arguments. This way it becomes impossible to conflate the two
eliminating the possibility of any bugs. All of the vfs and all filesystems
only operate on struct mnt_idmap.

Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>

show more ...

mm/swap: convert deactivate_page() to folio_deactivate()

Deactivate_page() has already been converted to use folios, this change
converts it to take in a folio argument instead of calling page_folio

mm/swap: convert deactivate_page() to folio_deactivate()

Deactivate_page() has already been converted to use folios, this change
converts it to take in a folio argument instead of calling page_folio().
It also renames the function folio_deactivate() to be more consistent with
other folio functions.

[akpm@linux-foundation.org: fix left-over comments, per Yu Zhao]
Link: https://lkml.kernel.org/r/20221221180848.20774-5-vishal.moola@gmail.com
Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

show more ...