udf: fix memory leak while allocating blocks during write

Need to brelse the buffer_head stored in cur_epos and next_epos.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish

udf: fix memory leak while allocating blocks during write

Need to brelse the buffer_head stored in cur_epos and next_epos.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Signed-off-by: Jan Kara <jack@suse.cz>

show more ...

userns: Convert the udf filesystem to use kuid/kgid where appropriate

Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>

UDF: Add support for O_DIRECT

Add support for the O_DIRECT flag. There are two cases to deal with:

1. Small files stored in the ICB (inode control block?): just return 0
from the new udf_adinicb_d

UDF: Add support for O_DIRECT

Add support for the O_DIRECT flag. There are two cases to deal with:

1. Small files stored in the ICB (inode control block?): just return 0
from the new udf_adinicb_direct_IO() handler to fall back to buffered
I/O.

2. Larger files, not stored in the ICB: nothing special here. Just call
blockdev_direct_IO() from our new udf_direct_IO() handler and tidy up
any blocks instantiated outside i_size on error. This is pretty
standard. Factor error handling code out of udf_write_begin() into new
function udf_write_failed() so it can also be called by udf_direct_IO().

Also change the whitespace in udf_aops to make it a bit neater.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Jan Kara <jack@suse.cz>

show more ...

udf: add writepages support for udf

Use mpage_writepages() instead of multiple calls to udf_writepage()
to make performance higher.

*Write Speed with writepage() =
RecSize ReadSpeed WriteSp

udf: add writepages support for udf

Use mpage_writepages() instead of multiple calls to udf_writepage()
to make performance higher.

*Write Speed with writepage() =
RecSize ReadSpeed WriteSpeed RanReadSpeed RanWriteSpeed
10485760 0.00MB/sec 8.56MB/sec 0.00MB/sec 8.20MB/sec
1048576 0.00MB/sec 8.57MB/sec 0.00MB/sec 6.42MB/sec
524288 0.00MB/sec 8.59MB/sec 0.00MB/sec 5.24MB/sec
262144 0.00MB/sec 8.59MB/sec 0.00MB/sec 4.17MB/sec
131072 0.00MB/sec 8.53MB/sec 0.00MB/sec 3.32MB/sec
65536 0.00MB/sec 8.49MB/sec 0.00MB/sec 2.31MB/sec

*Write Speed with writepages()
RecSize ReadSpeed WriteSpeed RanReadSpeed RanWriteSpeed
10485760 0.00MB/sec 9.88MB/sec 0.00MB/sec 9.60MB/sec
1048576 0.00MB/sec 9.95MB/sec 0.00MB/sec 7.52MB/sec
524288 0.00MB/sec 9.98MB/sec 0.00MB/sec 6.16MB/sec
262144 0.00MB/sec 9.90MB/sec 0.00MB/sec 4.98MB/sec
131072 0.00MB/sec 9.89MB/sec 0.00MB/sec 3.78MB/sec
65536 0.00MB/sec 9.81MB/sec 0.00MB/sec 2.50MB/sec

There is about 1.4MB/sec speed improvement over 8.5MB/sec,
which comes out around 16% improvement.

Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Ashish Sangwan <ashish.sangwan2@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>

show more ...

udf: fix udf_setsize() for file data in ICB

If the new size is larger than the old size and the old file data was
stored in the ICB (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) and the
new size st

udf: fix udf_setsize() for file data in ICB

If the new size is larger than the old size and the old file data was
stored in the ICB (iinfo->i_alloc_type == ICBTAG_FLAG_AD_IN_ICB) and the
new size still fits in the ICB, skip the call to udf_extend_file() as it
does not handle this i_alloc_type value (it calls BUG()).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Jan Kara <jack@suse.cz>

show more ...

UDF: Remove unnecessary variable "offset" from udf_fill_inode

The variable "offset" is not needed. Remove it.

Signed-off-by: Ashish Sangwan <ashish.sangwan2@gmail.com>
Signed-off-by: Namjae Jeon <l

UDF: Remove unnecessary variable "offset" from udf_fill_inode

The variable "offset" is not needed. Remove it.

Signed-off-by: Ashish Sangwan <ashish.sangwan2@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>

show more ...

vfs: Rename end_writeback() to clear_inode()

After we moved inode_sync_wait() from end_writeback() it doesn't make sense
to call the function end_writeback() anymore. Rename it to clear_inode()
whic

vfs: Rename end_writeback() to clear_inode()

After we moved inode_sync_wait() from end_writeback() it doesn't make sense
to call the function end_writeback() anymore. Rename it to clear_inode()
which well says what the function really does - set I_CLEAR flag.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>

show more ...

udf: Fix file entry logicalBlocksRecorded

ECMA 1.67 requires setting logicalBlocksRecorded to zero if the file
has no extents. This should be checked in udf_update_inode().
udf_fill_inode() will the

udf: Fix file entry logicalBlocksRecorded

ECMA 1.67 requires setting logicalBlocksRecorded to zero if the file
has no extents. This should be checked in udf_update_inode().
udf_fill_inode() will then take care of itself.

Signed-off-by: Steven P. Nickel <snickel@focusinfo.com>
Signed-off-by: Jan Kara <jack@suse.cz>

show more ...

udf: Init/maintain file entry checkpoint field

In accordance with ECMA 1.67 Part 4, 14.9.15, the checkpoint field
should be initialized to 1 at creation. (Zero is *not* a valid value.)

Signed-off-b

udf: Init/maintain file entry checkpoint field

In accordance with ECMA 1.67 Part 4, 14.9.15, the checkpoint field
should be initialized to 1 at creation. (Zero is *not* a valid value.)

Signed-off-by: Steven P. Nickel <snickel@focusinfo.com>
Signed-off-by: Jan Kara <jack@suse.cz>

show more ...

udf: Fix deadlock when converting file from in-ICB one to normal one

During BKL removal in 2.6.38, conversion of files from in-ICB format to normal
format got broken. We call ->writepage with i_data

udf: Fix deadlock when converting file from in-ICB one to normal one

During BKL removal in 2.6.38, conversion of files from in-ICB format to normal
format got broken. We call ->writepage with i_data_sem held but udf_get_block()
also acquires i_data_sem thus creating A-A deadlock.

We fix the problem by dropping i_data_sem before calling ->writepage() which is
safe since i_mutex still protects us against any changes in the file. Also fix
pagelock - i_data_sem lock inversion in udf_expand_file_adinicb() by dropping
i_data_sem before calling find_or_create_page().

CC: stable@kernel.org
Reported-by: Matthias Matiak <netzpython@mail-on.us>
Tested-by: Matthias Matiak <netzpython@mail-on.us>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>

show more ...

udf: Cleanup calling convention of inode_getblk()

inode_getblk() always returned NULL and passed results in its parameters.
Make the function return something useful - found block number.

Signed-of

udf: Cleanup calling convention of inode_getblk()

inode_getblk() always returned NULL and passed results in its parameters.
Make the function return something useful - found block number.

Signed-off-by: Jan Kara <jack@suse.cz>

show more ...

udf: propagate umode_t

note re mount options: fmask and dmask are explicitly truncated to 12bit,
UDF_INVALID_MODE just needs to be guaranteed to differ from any such value.
And umask is used only in

udf: propagate umode_t

note re mount options: fmask and dmask are explicitly truncated to 12bit,
UDF_INVALID_MODE just needs to be guaranteed to differ from any such value.
And umask is used only in &= with umode_t, so we ignore other bits anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

filesystems: add set_nlink()

Replace remaining direct i_nlink updates with a new set_nlink()
updater function.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.o

filesystems: add set_nlink()

Replace remaining direct i_nlink updates with a new set_nlink()
updater function.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

show more ...

udf: Neaten udf_debug uses

Just whitespace and argument alignment.
Introduce some checkpatch warnings that deserve to be ignored.

Reviewed-by: NamJae Jeon <linkinjeon@gmail.com>
Signed-off-by: Joe

udf: Neaten udf_debug uses

Just whitespace and argument alignment.
Introduce some checkpatch warnings that deserve to be ignored.

Reviewed-by: NamJae Jeon <linkinjeon@gmail.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jan Kara <jack@suse.cz>

show more ...

udf: Convert printks to pr_<level>

Use the current logging styles.

Convert a few printks that should have been udf_warn and udf_err.
Coalesce formats. Add #define pr_fmt.
Move an #include "udfdecl

udf: Convert printks to pr_<level>

Use the current logging styles.

Convert a few printks that should have been udf_warn and udf_err.
Coalesce formats. Add #define pr_fmt.
Move an #include "udfdecls.h" above other includes in udftime.c
so pr_fmt works correctly. Strip prefixes from conversions as appropriate.
Reorder logging definitions in udfdecl.h

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jan Kara <jack@suse.cz>

show more ...

udf: Add readpages support for udf.

Use mpage_readpages() instead of multiple calls to udf_readpage() to reduce the
CPU utilization and make performance higher.

Signed-off-by: Namjae Jeon <linkinje

udf: Add readpages support for udf.

Use mpage_readpages() instead of multiple calls to udf_readpage() to reduce the
CPU utilization and make performance higher.

Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>

show more ...

block: remove per-queue plugging

Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old pluggin

block: remove per-queue plugging

Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

show more ...

udf: Convert UDF to new truncate calling sequence

Use new truncation sequence in UDF and fix up error handling in the
code.

Signed-off-by: Jan Kara <jack@suse.cz>

udf: Remove unnecessary bkl usages

The udf_readdir(), udf_lookup(), udf_create(), udf_mknod(), udf_mkdir(),
udf_rmdir(), udf_link(), udf_get_parent() and udf_unlink() seems already
adequately protec

udf: Remove unnecessary bkl usages

The udf_readdir(), udf_lookup(), udf_create(), udf_mknod(), udf_mkdir(),
udf_rmdir(), udf_link(), udf_get_parent() and udf_unlink() seems already
adequately protected by i_mutex held by VFS invoking calls. The udf_rename()
instead should be already protected by lock_rename again by VFS. The
udf_ioctl(), udf_fill_super() and udf_evict_inode() don't requires any further
protection.

This work was supported by a hardware donation from the CE Linux Forum.

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Jan Kara <jack@suse.cz>

show more ...

udf: Replace bkl with the UDF_I(inode)->i_data_sem for protect udf_inode_info struct

Replace bkl with the UDF_I(inode)->i_data_sem rw semaphore in
udf_release_file(), udf_symlink(), udf_symlink_fill

udf: Replace bkl with the UDF_I(inode)->i_data_sem for protect udf_inode_info struct

Replace bkl with the UDF_I(inode)->i_data_sem rw semaphore in
udf_release_file(), udf_symlink(), udf_symlink_filler(), udf_get_block(),
udf_block_map(), and udf_setattr(). The rule now is that any operation
on regular file's or symlink's extents (or generally allocation information
including goal block) needs to hold i_data_sem.

This work was supported by a hardware donation from the CE Linux Forum.

Signed-off-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Jan Kara <jack@suse.cz>

show more ...

udf: Protect default inode credentials by rwlock

Superblock carries credentials (uid, gid, etc.) which are used as default
values in __udf_read_inode() when media does not provide these. These
crede

udf: Protect default inode credentials by rwlock

Superblock carries credentials (uid, gid, etc.) which are used as default
values in __udf_read_inode() when media does not provide these. These
credentials can change during remount so we protect them by a rwlock so that
each inode gets a consistent set of credentials.

Signed-off-by: Jan Kara <jack@suse.cz>

show more ...

udf: Remove BKL from udf_update_inode

udf_update_inode() does not need BKL since on-disk inode modifications are
protected by the buffer lock and reading of values of in-memory inode is
safe without

udf: Remove BKL from udf_update_inode

udf_update_inode() does not need BKL since on-disk inode modifications are
protected by the buffer lock and reading of values of in-memory inode is
safe without any lock. In some cases we can write inconsistent inode state
to disk but in that case inode will be marked dirty and overwritten later.

Also make unnecessarily global udf_sync_inode() static.

Signed-off-by: Jan Kara <jack@suse.cz>

show more ...

switch udf to ->evict_inode()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

get rid of block_write_begin_newtrunc

Move the call to vmtruncate to get rid of accessive blocks to the callers
in preparation of the new truncate sequence and rename the non-truncating
version to b

get rid of block_write_begin_newtrunc

Move the call to vmtruncate to get rid of accessive blocks to the callers
in preparation of the new truncate sequence and rename the non-truncating
version to block_write_begin.

While we're at it also remove several unused arguments to block_write_begin.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

udf: Remove dead quota code

Quota on UDF is non-functional at least since 2.6.16 (I'm too lazy to
do more archeology) because it does not provide .quota_write and .quota_read
functions and thus quot

udf: Remove dead quota code

Quota on UDF is non-functional at least since 2.6.16 (I'm too lazy to
do more archeology) because it does not provide .quota_write and .quota_read
functions and thus quotaon(8) just returns EINVAL. Since nobody complained
for all those years and quota support is not even in UDF standard just nuke
it.

Signed-off-by: Jan Kara <jack@suse.cz>

show more ...