nvdimm: make security_show static

The security_show function is not used outside of drivers/nvdimm/dimm_devs.c
and the attribute it is for is also already static. Silence the sparse
warning for this

nvdimm: make security_show static

The security_show function is not used outside of drivers/nvdimm/dimm_devs.c
and the attribute it is for is also already static. Silence the sparse
warning for this not being declared by making it static. Fixes:

drivers/nvdimm/dimm_devs.c:352:9: warning: symbol 'security_show' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20230616160925.17687-1-ben.dooks@codethink.co.uk
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>

show more ...

libnvdimm: mark 'security_show' static again

The security_show() function was made global and __weak at some
point to allow overriding it. The override was removed later, but
it remains global, whic

libnvdimm: mark 'security_show' static again

The security_show() function was made global and __weak at some
point to allow overriding it. The override was removed later, but
it remains global, which causes a warning about the missing
declaration:

drivers/nvdimm/dimm_devs.c:352:9: error: no previous prototype for 'security_show'

This is also not an appropriate name for a global symbol in the
kernel, so just make it static again.

Fixes: 15a8348707ff ("libnvdimm: Introduce CONFIG_NVDIMM_SECURITY_TEST flag")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230516201415.556858-3-arnd@kernel.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

cxl/pmem: Fix nvdimm registration races

A loop of the form:

while true; do modprobe cxl_pci; modprobe -r cxl_pci; done

...fails with the following crash signature:

BUG: kernel NULL pointe

cxl/pmem: Fix nvdimm registration races

A loop of the form:

while true; do modprobe cxl_pci; modprobe -r cxl_pci; done

...fails with the following crash signature:

BUG: kernel NULL pointer dereference, address: 0000000000000040
[..]
RIP: 0010:cxl_internal_send_cmd+0x5/0xb0 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_pmem_ctl+0x121/0x240 [cxl_pmem]
nvdimm_get_config_data+0xd6/0x1a0 [libnvdimm]
nd_label_data_init+0x135/0x7e0 [libnvdimm]
nvdimm_probe+0xd6/0x1c0 [libnvdimm]
nvdimm_bus_probe+0x7a/0x1e0 [libnvdimm]
really_probe+0xde/0x380
__driver_probe_device+0x78/0x170
driver_probe_device+0x1f/0x90
__device_attach_driver+0x85/0x110
bus_for_each_drv+0x7d/0xc0
__device_attach+0xb4/0x1e0
bus_probe_device+0x9f/0xc0
device_add+0x445/0x9c0
nd_async_device_register+0xe/0x40 [libnvdimm]
async_run_entry_fn+0x30/0x130

...namely that the bottom half of async nvdimm device registration runs
after the CXL has already torn down the context that cxl_pmem_ctl()
needs. Unlike the ACPI NFIT case that benefits from launching multiple
nvdimm device registrations in parallel from those listed in the table,
CXL is already marked PROBE_PREFER_ASYNCHRONOUS. So provide for a
synchronous registration path to preclude this scenario.

Fixes: 21083f51521f ("cxl/pmem: Register 'pmem' / cxl_nvdimm devices")
Cc: <stable@vger.kernel.org>
Reported-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

driver core: make struct bus_type.uevent() take a const *

The uevent() callback in struct bus_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate th

driver core: make struct bus_type.uevent() take a const *

The uevent() callback in struct bus_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.

Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

libnvdimm: Introduce CONFIG_NVDIMM_SECURITY_TEST flag

nfit_test overrode the security_show() sysfs attribute function in nvdimm
dimm_devs in order to allow testing of security unlock. With the
intro

libnvdimm: Introduce CONFIG_NVDIMM_SECURITY_TEST flag

nfit_test overrode the security_show() sysfs attribute function in nvdimm
dimm_devs in order to allow testing of security unlock. With the
introduction of CXL security commands, the trick to override
security_show() becomes significantly more complicated. By introdcing a
security flag CONFIG_NVDIMM_SECURITY_TEST, libnvdimm can just toggle the
check via a compile option. In addition the original override can can be
removed from tools/testing/nvdimm/.

The flag will also be used to bypass cpu_cache_invalidate_memregion() when
set in a different commit. This allows testing on QEMU with nfit_test or
cxl_test since cpu_cache_has_invalidate_memregion() checks whether
X86_FEATURE_HYPERVISOR cpu feature flag is set on x86.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983618758.2734609.18031639517065867138.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

nvdimm: Drop nd_device_lock()

Now that all NVDIMM subsystem locking is validated with custom lock
classes, there is no need for the custom usage of the lockdep_mutex.

Cc: Vishal Verma <vishal.l.ver

nvdimm: Drop nd_device_lock()

Now that all NVDIMM subsystem locking is validated with custom lock
classes, there is no need for the custom usage of the lockdep_mutex.

Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/165055521979.3745911.10751769706032029999.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

nvdimm: Replace lockdep_mutex with local lock classes

In response to an attempt to expand dev->lockdep_mutex for device_lock()
validation [1], Peter points out [2] that the lockdep API already has
t

nvdimm: Replace lockdep_mutex with local lock classes

In response to an attempt to expand dev->lockdep_mutex for device_lock()
validation [1], Peter points out [2] that the lockdep API already has
the ability to assign a dedicated lock class per subsystem device-type.

Use lockdep_set_class() to override the default device_lock()
'__lockdep_no_validate__' class for each NVDIMM subsystem device-type. This
enables lockdep to detect deadlocks and recursive locking within the
device-driver core and the subsystem.

Link: https://lore.kernel.org/r/164982968798.684294.15817853329823976469.stgit@dwillia2-desk3.amr.corp.intel.com [1]
Link: https://lore.kernel.org/r/Ylf0dewci8myLvoW@hirez.programming.kicks-ass.net [2]
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/165055520896.3745911.8021255583475547548.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

nvdimm/region: Delete nd_blk_region infrastructure

Now that the nd_namespace_blk infrastructure is removed, delete all the
region machinery to coordinate provisioning aliased capacity between
PMEM a

nvdimm/region: Delete nd_blk_region infrastructure

Now that the nd_namespace_blk infrastructure is removed, delete all the
region machinery to coordinate provisioning aliased capacity between
PMEM and BLK.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/164688418803.2879318.1302315202397235855.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

libnvdimm: Export nvdimm shutdown helper, nvdimm_delete()

CXL is a hotplug bus and arranges for nvdimm devices to be dynamically
discovered and removed. The libnvdimm core manages shutdown of nvdimm

libnvdimm: Export nvdimm shutdown helper, nvdimm_delete()

CXL is a hotplug bus and arranges for nvdimm devices to be dynamically
discovered and removed. The libnvdimm core manages shutdown of nvdimm
security operations when the device is unregistered. That functionality
is moved to nvdimm_delete() and invoked by the CXL-to-nvdimm glue code.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162379910271.2993820.2955889139842401250.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

libnvdimm/dimm: Avoid race between probe and available_slots_show()

Richard reports that the following test:

(while true; do
cat /sys/bus/nd/devices/nmem*/available_slots 2>&1 > /dev/null
don

libnvdimm/dimm: Avoid race between probe and available_slots_show()

Richard reports that the following test:

(while true; do
cat /sys/bus/nd/devices/nmem*/available_slots 2>&1 > /dev/null
done) &

while true; do
for i in $(seq 0 4); do
echo nmem$i > /sys/bus/nd/drivers/nvdimm/bind
done
for i in $(seq 0 4); do
echo nmem$i > /sys/bus/nd/drivers/nvdimm/unbind
done
done

...fails with a crash signature like:

divide error: 0000 [#1] SMP KASAN PTI
RIP: 0010:nd_label_nfree+0x134/0x1a0 [libnvdimm]
[..]
Call Trace:
available_slots_show+0x4e/0x120 [libnvdimm]
dev_attr_show+0x42/0x80
? memset+0x20/0x40
sysfs_kf_seq_show+0x218/0x410

The root cause is that available_slots_show() consults driver-data, but
fails to synchronize against device-unbind setting up a TOCTOU race to
access uninitialized memory.

Validate driver-data under the device-lock.

Fixes: 4d88a97aa9e8 ("libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver infrastructure")
Cc: <stable@vger.kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Coly Li <colyli@suse.com>
Reported-by: Richard Palethorpe <rpalethorpe@suse.com>
Acked-by: Richard Palethorpe <rpalethorpe@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

libnvdimm/dimm: Avoid race between probe and available_slots_show()

commit 7018c897c2f243d4b5f1b94bc6b4831a7eab80fb upstream.

Richard reports that the following test:

(while true; do
cat /sys

libnvdimm/dimm: Avoid race between probe and available_slots_show()

commit 7018c897c2f243d4b5f1b94bc6b4831a7eab80fb upstream.

Richard reports that the following test:

(while true; do
cat /sys/bus/nd/devices/nmem*/available_slots 2>&1 > /dev/null
done) &

while true; do
for i in $(seq 0 4); do
echo nmem$i > /sys/bus/nd/drivers/nvdimm/bind
done
for i in $(seq 0 4); do
echo nmem$i > /sys/bus/nd/drivers/nvdimm/unbind
done
done

...fails with a crash signature like:

divide error: 0000 [#1] SMP KASAN PTI
RIP: 0010:nd_label_nfree+0x134/0x1a0 [libnvdimm]
[..]
Call Trace:
available_slots_show+0x4e/0x120 [libnvdimm]
dev_attr_show+0x42/0x80
? memset+0x20/0x40
sysfs_kf_seq_show+0x218/0x410

The root cause is that available_slots_show() consults driver-data, but
fails to synchronize against device-unbind setting up a TOCTOU race to
access uninitialized memory.

Validate driver-data under the device-lock.

Fixes: 4d88a97aa9e8 ("libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver infrastructure")
Cc: <stable@vger.kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Coly Li <colyli@suse.com>
Reported-by: Richard Palethorpe <rpalethorpe@suse.com>
Acked-by: Richard Palethorpe <rpalethorpe@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

libnvdimm: KASAN: global-out-of-bounds Read in internal_create_group

Because the last member of the "nvdimm_firmware_attributes" array
was not assigned a null ptr, when traversal of "grp->attrs" arr

libnvdimm: KASAN: global-out-of-bounds Read in internal_create_group

Because the last member of the "nvdimm_firmware_attributes" array
was not assigned a null ptr, when traversal of "grp->attrs" array
is out of bounds in "create_files" func.

func:
create_files:
->for (i = 0, attr = grp->attrs; *attr && !error; i++, attr++)
->....

BUG: KASAN: global-out-of-bounds in create_files fs/sysfs/group.c:43 [inline]
BUG: KASAN: global-out-of-bounds in internal_create_group+0x9d8/0xb20
fs/sysfs/group.c:149
Read of size 8 at addr ffffffff8a2e4cf0 by task kworker/u17:10/959

CPU: 2 PID: 959 Comm: kworker/u17:10 Not tainted 5.8.0-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Workqueue: events_unbound async_run_entry_fn
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x18f/0x20d lib/dump_stack.c:118
print_address_description.constprop.0.cold+0x5/0x497 mm/kasan/report.c:383
__kasan_report mm/kasan/report.c:513 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
create_files fs/sysfs/group.c:43 [inline]
internal_create_group+0x9d8/0xb20 fs/sysfs/group.c:149
internal_create_groups.part.0+0x90/0x140 fs/sysfs/group.c:189
internal_create_groups fs/sysfs/group.c:185 [inline]
sysfs_create_groups+0x25/0x50 fs/sysfs/group.c:215
device_add_groups drivers/base/core.c:2024 [inline]
device_add_attrs drivers/base/core.c:2178 [inline]
device_add+0x7fd/0x1c40 drivers/base/core.c:2881
nd_async_device_register+0x12/0x80 drivers/nvdimm/bus.c:506
async_run_entry_fn+0x121/0x530 kernel/async.c:123
process_one_work+0x94c/0x1670 kernel/workqueue.c:2269
worker_thread+0x64c/0x1120 kernel/workqueue.c:2415
kthread+0x3b5/0x4a0 kernel/kthread.c:292
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294

The buggy address belongs to the variable:
nvdimm_firmware_attributes+0x10/0x40

Link: https://lore.kernel.org/r/20200812085501.30963-1-qiang.zhang@windriver.com
Link: https://lore.kernel.org/r/20200814150509.225615-1-vaibhav@linux.ibm.com
Fixes: 48001ea50d17f ("PM, libnvdimm: Add runtime firmware activation support")
Reported-by: syzbot+1cf0ffe61aecf46f588f@syzkaller.appspotmail.com
Reported-by: Sandipan Das <sandipan@linux.ibm.com>
Reported-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>

show more ...

libnvdimm/security: the 'security' attr never show 'overwrite' state

'security' attribute displays the security state of an nvdimm.
During normal operation, the nvdimm state maybe one of 'disabled',

libnvdimm/security: the 'security' attr never show 'overwrite' state

'security' attribute displays the security state of an nvdimm.
During normal operation, the nvdimm state maybe one of 'disabled',
'unlocked' or 'locked'. When an admin issues
# ndctl sanitize-dimm nmem0 --overwrite
the attribute is expected to change to 'overwrite' until the overwrite
operation completes.

But tests on our systems show that 'overwrite' is never shown during
the overwrite operation. i.e.
# cat /sys/devices/LNXSYSTM:00/LNXSYBUS:00/ACPI0012:00/ndbus0/nmem0/security
unlocked
the attribute remain 'unlocked' through out the operation, consequently
"ndctl wait-overwrite nmem0" command doesn't wait at all.

The driver tracks the state in 'nvdimm->sec.flags': when the operation
starts, it adds an overwrite bit to the flags; and when the operation
completes, it removes the bit. Hence security_show() should check the
'overwrite' bit first, in order to indicate the actual state when multiple
bits are set in the flags.

Link: https://lore.kernel.org/r/1596494499-9852-2-git-send-email-jane.chu@oracle.com
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>

show more ...

ACPI: NFIT: Add runtime firmware activate support

Plumb the platform specific backend for the generic libnvdimm firmware
activate interface. Register dimm level operations to arm/disarm
activation,

ACPI: NFIT: Add runtime firmware activate support

Plumb the platform specific backend for the generic libnvdimm firmware
activate interface. Register dimm level operations to arm/disarm
activation, and register bus level operations to report the dynamic
platform-quiesce time relative to the number of dimms armed for firmware
activation.

A new nfit-specific bus attribute "firmware_activate_noidle" is added to
allow the activation to switch between platform enforced, and OS
opportunistic device quiesce. In other words, let the hibernate cycle
handle in-flight device-dma rather than the platform attempting to
increase PCI-E timeouts and the like.

Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>

show more ...

PM, libnvdimm: Add runtime firmware activation support

Abstract platform specific mechanics for nvdimm firmware activation
behind a handful of generic ops. At the bus level ->activate_state()
indica

PM, libnvdimm: Add runtime firmware activation support

Abstract platform specific mechanics for nvdimm firmware activation
behind a handful of generic ops. At the bus level ->activate_state()
indicates the unified state (idle, busy, armed) of all DIMMs on the bus,
and ->capability() indicates the system state expectations for activate.
At the DIMM level ->activate_state() indicates the per-DIMM state,
->activate_result() indicates the outcome of the last activation
attempt, and ->arm() attempts to transition the DIMM from 'idle' to
'armed'.

A new hibernate_quiet_exec() facility is added to support firmware
activation in an OS defined system quiesce state. It leverages the fact
that the hibernate-freeze state wants to assert that a memory
hibernation snapshot can be taken. This is in contrast to a platform
firmware defined quiesce state that may forcefully quiet the memory
controller independent of whether an individual device-driver properly
supports hibernate-freeze.

The libnvdimm sysfs interface is extended to support detection of a
firmware activate capability. The mechanism supports enumeration and
triggering of firmware activate, optionally in the
hibernate_quiet_exec() context.

[rafael: hibernate_quiet_exec() proposal]
[vishal: fix up sparse warning, grammar in Documentation/]

Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Co-developed-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>

show more ...

libnvdimm/region: Introduce an 'align' attribute

The align attribute applies an alignment constraint for namespace
creation in a region. Whereas the 'align' attribute of a namespace
applied alignmen

libnvdimm/region: Introduce an 'align' attribute

The align attribute applies an alignment constraint for namespace
creation in a region. Whereas the 'align' attribute of a namespace
applied alignment padding via an info block, the 'align' attribute
applies alignment constraints to the free space allocation.

The default for 'align' is the maximum known memremap_compat_align()
across all archs (16MiB from PowerPC at time of writing) multiplied by
the number of interleave ways if there is blk-aliasing. The minimum is
PAGE_SIZE and allows for the creation of cross-arch incompatible
namespaces, just as previous kernels allowed, but the expectation is
cross-arch and mode-independent compatibility by default.

The regression risk with this change is limited to cases that were
dependent on the ability to create unaligned namespaces, *and* for some
reason are unable to opt-out of aligned namespaces by writing to
'regionX/align'. If such a scenario arises the default can be flipped
from opt-out to opt-in of compat-aligned namespace creation, but that is
a last resort. The kernel will otherwise continue to support existing
defined misaligned namespaces.

Unfortunately this change needs to touch several parts of the
implementation at once:

- region/available_size: expand busy extents to current align
- region/max_available_extent: expand busy extents to current align
- namespace/size: trim free space to current align

...to keep the free space accounting conforming to the dynamic align
setting.

Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/158041478371.3889308.14542630147672668068.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

libnvdimm/region: Introduce NDD_LABELING

The NDD_ALIASING flag is used to indicate where pmem capacity might
alias with blk capacity and require labeling. It is also used to
indicate whether the DIM

libnvdimm/region: Introduce NDD_LABELING

The NDD_ALIASING flag is used to indicate where pmem capacity might
alias with blk capacity and require labeling. It is also used to
indicate whether the DIMM supports labeling. Separate this latter
capability into its own flag so that the NDD_ALIASING flag is scoped to
true aliased configurations.

To my knowledge aliased configurations only exist in the ACPI spec,
there are no known platforms that ship this support in production.

This clarity allows namespace-capacity alignment constraints around
interleave-ways to be relaxed.

Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/158041477856.3889308.4212605617834097674.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

libnvdimm: Move nvdimm_attribute_group to device_type

A 'struct device_type' instance can carry default attributes for the
device. Use this facility to remove the export of
nvdimm_attribute_group an

libnvdimm: Move nvdimm_attribute_group to device_type

A 'struct device_type' instance can carry default attributes for the
device. Use this facility to remove the export of
nvdimm_attribute_group and put the responsibility on the core rather
than leaf implementations to define this attribute.

Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/157309903201.1582359.10966209746585062329.stgit@dwillia2-desk3.amr.corp.intel.com

show more ...

libnvdimm: Move nd_device_attribute_group to device_type

A 'struct device_type' instance can carry default attributes for the
device. Use this facility to remove the export of
nd_device_attribute_gr

libnvdimm: Move nd_device_attribute_group to device_type

A 'struct device_type' instance can carry default attributes for the
device. Use this facility to remove the export of
nd_device_attribute_group and put the responsibility on the core rather
than leaf implementations to define this attribute.

For regions this creates a new nd_region_attribute_groups[] added to the
per-region device-type instances.

Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/157309901138.1582359.12909354140826530394.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

libnvdimm/security: Consolidate 'security' operations

The security operations are exported from libnvdimm/security.c to
libnvdimm/dimm_devs.c, and libnvdimm/security.c is optionally compiled
based o

libnvdimm/security: Consolidate 'security' operations

The security operations are exported from libnvdimm/security.c to
libnvdimm/dimm_devs.c, and libnvdimm/security.c is optionally compiled
based on the CONFIG_NVDIMM_KEYS config symbol.

Rather than export the operations across compile objects, just move the
__security_store() entry point to live with the helpers.

Acked-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/156686730515.184120.10522747907309996674.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

libnvdimm/security: Tighten scope of nvdimm->busy vs security operations

An attempt to freeze DIMMs currently runs afoul of default blocking of
all security operations in the entry to the 'store' ro

libnvdimm/security: Tighten scope of nvdimm->busy vs security operations

An attempt to freeze DIMMs currently runs afoul of default blocking of
all security operations in the entry to the 'store' routine for the
'security' sysfs attribute.

The blanket blocking of all security operations while the DIMM is in
active use in a region is too restrictive. The only security operations
that need to be aware of the ->busy state are those that mutate the
state of data, i.e. erase and overwrite.

Refactor the ->busy checks to be applied at the entry common entry point
in __security_store() rather than each of the helper routines to enable
freeze to be run regardless of busy state.

Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/156686729996.184120.3458026302402493937.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

libnvdimm/security: Introduce a 'frozen' attribute

In the process of debugging a system with an NVDIMM that was failing to
unlock it was found that the kernel is reporting 'locked' while the DIMM
se

libnvdimm/security: Introduce a 'frozen' attribute

In the process of debugging a system with an NVDIMM that was failing to
unlock it was found that the kernel is reporting 'locked' while the DIMM
security interface is 'frozen'. Unfortunately the security state is
tracked internally as an enum which prevents it from communicating the
difference between 'locked' and 'locked + frozen'. It follows that the
enum also prevents the kernel from communicating 'unlocked + frozen'
which would be useful for debugging why security operations like 'change
passphrase' are disabled.

Ditch the security state enum for a set of flags and introduce a new
sysfs attribute explicitly for the 'frozen' state. The regression risk
is low because the 'frozen' state was already blocked behind the
'locked' state, but will need to revisit if there were cases where
applications need 'frozen' to show up in the primary 'security'
attribute. The expectation is that communicating 'frozen' is mostly a
helper for debug and status monitoring.

Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/156686729474.184120.5835135644278860826.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

show more ...

driver-core, libnvdimm: Let device subsystems add local lockdep coverage

For good reason, the standard device_lock() is marked
lockdep_set_novalidate_class() because there is simply no sane way to
d

driver-core, libnvdimm: Let device subsystems add local lockdep coverage

For good reason, the standard device_lock() is marked
lockdep_set_novalidate_class() because there is simply no sane way to
describe the myriad ways the device_lock() ordered with other locks.
However, that leaves subsystems that know their own local device_lock()
ordering rules to find lock ordering mistakes manually. Instead,
introduce an optional / additional lockdep-enabled lock that a subsystem
can acquire in all the same paths that the device_lock() is acquired.

A conversion of the NFIT driver and NVDIMM subsystem to a
lockdep-validate device_lock() scheme is included. The
debug_nvdimm_lock() implementation implements the correct lock-class and
stacking order for the libnvdimm device topology hierarchy.

Yes, this is a hack, but hopefully it is a useful hack for other
subsystems device_lock() debug sessions. Quoting Greg:

"Yeah, it feels a bit hacky but it's really up to a subsystem to mess up
using it as much as anything else, so user beware :)

I don't object to it if it makes things easier for you to debug."

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/156341210661.292348.7014034644265455704.stgit@dwillia2-desk3.amr.corp.intel.com

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of ve

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms of version 2 of the gnu general public license as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 64 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively

%pF and %pf are functionally equivalent to %pS and %ps conversion
specifiers. The former are deprecated, therefore switch

treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively

%pF and %pf are functionally equivalent to %pS and %ps conversion
specifiers. The former are deprecated, therefore switch the current users
to use the preferred variant.

The changes have been produced by the following command:

git grep -l '%p[fF]' | grep -v '^\(tools\|Documentation\)/' | \
while read i; do perl -i -pe 's/%pf/%ps/g; s/%pF/%pS/g;' $i; done

And verifying the result.

Link: http://lkml.kernel.org/r/20190325193229.23390-1-sakari.ailus@linux.intel.com
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: sparclinux@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Cc: linux-acpi@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: drbd-dev@lists.linbit.com
Cc: linux-block@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-nvdimm@lists.01.org
Cc: linux-pci@vger.kernel.org
Cc: linux-scsi@vger.kernel.org
Cc: linux-btrfs@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: linux-mm@kvack.org
Cc: ceph-devel@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: David Sterba <dsterba@suse.com> (for btrfs)
Acked-by: Mike Rapoport <rppt@linux.ibm.com> (for mm/memblock.c)
Acked-by: Bjorn Helgaas <bhelgaas@google.com> (for drivers/pci)
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>

show more ...