wifi: mt76: mt7996: add muru support

Add sta_rec_muru() fw command to support MU-MIMO and OFDMA features.

Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.

wifi: mt76: mt7996: add muru support

Add sta_rec_muru() fw command to support MU-MIMO and OFDMA features.

Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: connac: add support to set ifs time by mcu command

There's a race between driver and fw on some tx/rx control registers
when setting ifs, which will cause accidental hw queue pause probl

wifi: mt76: connac: add support to set ifs time by mcu command

There's a race between driver and fw on some tx/rx control registers
when setting ifs, which will cause accidental hw queue pause problems.
Avoid this by setting ifs time with bss_info mcu command.

Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: connac: add support for dsp firmware download

Add FW_START_WORKING_PDA_DSP for the indication of starting DSP
firmware download, which is for phy-related control.
The firmware is transpa

wifi: mt76: connac: add support for dsp firmware download

Add FW_START_WORKING_PDA_DSP for the indication of starting DSP
firmware download, which is for phy-related control.
The firmware is transparent to the driver, but it's necessary for the
firmware download process.

Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7915: rework tx packets counting when WED is active

PPDU TxS can only report MPDU count whereas mac80211 requires MSDU scale
(NL80211_STA_INFO_TX_PACKETS), so switch to get MSDU counts

wifi: mt76: mt7915: rework tx packets counting when WED is active

PPDU TxS can only report MPDU count whereas mac80211 requires MSDU scale
(NL80211_STA_INFO_TX_PACKETS), so switch to get MSDU counts from WA
statistic.

Note that mt7915 WA firmware only counts tx_packet for WED path, so driver
needs to take care of host path additionally.

Fixes: 43eaa3689507 ("wifi: mt76: add PPDU based TxS support for WED device")
Co-developed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: move mcu_uni_event and mcu_reg_event in common code

mcu_uni_event and mcu_reg_event structs are shared between mt7921 and
mt7615 drivers, so move them in connac lib.

Signed-off-by: Lore

wifi: mt76: move mcu_uni_event and mcu_reg_event in common code

mcu_uni_event and mcu_reg_event structs are shared between mt7921 and
mt7615 drivers, so move them in connac lib.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7996: add full system reset knobs into debugfs

Add testing points into debugfs to trigger firmware assert and enable
full system recovery. Also rename knob "fw_ser" to a clear-cut name

wifi: mt76: mt7996: add full system reset knobs into debugfs

Add testing points into debugfs to trigger firmware assert and enable
full system recovery. Also rename knob "fw_ser" to a clear-cut name
"sys_recovery".

Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7921: enable p2p support

Introduce p2p-go/p2p-client support to mt7921 driver

CONNECTION_P2P_GC/GO is not supported with the current firmware
so we added mt76_dev to mt76_connac_mcu_s

wifi: mt76: mt7921: enable p2p support

Introduce p2p-go/p2p-client support to mt7921 driver

CONNECTION_P2P_GC/GO is not supported with the current firmware
so we added mt76_dev to mt76_connac_mcu_sta_basic_tlv signature to
use CONNECTION_INFRA_STA/AP instead for p2p-client and p2p-go
respectively to make it work.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: Replace zero-length array with flexible-array member

Zero-length arrays are deprecated [1] and have to be replaced by C99
flexible-array members.

This helps with the ongoing efforts to

wifi: mt76: Replace zero-length array with flexible-array member

Zero-length arrays are deprecated [1] and have to be replaced by C99
flexible-array members.

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines
on memcpy() and help to make progress towards globally enabling
-fstrict-flex-arrays=3 [2]

Link: https://github.com/KSPP/linux/issues/78 [1]
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [2]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: remove redundent MCU_UNI_CMD_* definitions

clear redundent definitions only

Fixes: 5b55b6da982c ("wifi: mt76: mt7921: add unified ROC cmd/event support")
Signed-off-by: Deren Wu <deren.

wifi: mt76: remove redundent MCU_UNI_CMD_* definitions

clear redundent definitions only

Fixes: 5b55b6da982c ("wifi: mt76: mt7921: add unified ROC cmd/event support")
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: increase wcid size to 1088

Increase wcid size to support up to 1024 station hw entries and
64 bcast/mcast hw entries.
This is the preliminary patch to add EHT support for mt7996.

Signed

wifi: mt76: increase wcid size to 1088

Increase wcid size to support up to 1024 station hw entries and
64 bcast/mcast hw entries.
This is the preliminary patch to add EHT support for mt7996.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: connac: add cmd id related to EHT support

This is the preliminary patch to add EHT support for mt7996.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau

wifi: mt76: connac: add cmd id related to EHT support

This is the preliminary patch to add EHT support for mt7996.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: connac: add helpers for EHT capability

Add helpers to get eht cap and phymode on different bands and vifs.
This is the preliminary patch to add EHT support for mt7996.

Signed-off-by: Sh

wifi: mt76: connac: add helpers for EHT capability

Add helpers to get eht cap and phymode on different bands and vifs.
This is the preliminary patch to add EHT support for mt7996.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: add EHT phy type

Extend phy type and phymode bitfields for EHT support.
This is the preliminary patch to add EHT support for mt7996.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com

wifi: mt76: add EHT phy type

Extend phy type and phymode bitfields for EHT support.
This is the preliminary patch to add EHT support for mt7996.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7921: fix rx filter incorrect by drv/fw inconsistent

The rx filter, in mt7921 series, may be changed in fw operation. There is
a racing problem if rx filter controlled by both driver a

wifi: mt76: mt7921: fix rx filter incorrect by drv/fw inconsistent

The rx filter, in mt7921 series, may be changed in fw operation. There is
a racing problem if rx filter controlled by both driver and firmware at
the same time. To avoid this issue, let mt7921 driver set rx filter by new
command MCU_CE_CMD_SET_RX_FILTER and allow the firmware controlling it
only.

Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Neil Chen <yn.chen@mediatek.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7915: wed: enable red per-band token drop

Enable RED to limit the number of token used by each band. If single band
uses too many tokens, it would hurt the throughput of the other band

wifi: mt76: mt7915: wed: enable red per-band token drop

Enable RED to limit the number of token used by each band. If single band
uses too many tokens, it would hurt the throughput of the other bands.The
software path can solve this problem by AQL so enable RED for HW path only.

Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: connac: fix POWER_CTRL command name typo

Fix typo MCU_UNI_CMD_POWER_CREL to MCU_UNI_CMD_POWER_CTRL.

Fixes: 779d34de055e ("wifi: mt76: connac: add more unified command IDs")
Signed-off-b

wifi: mt76: connac: fix POWER_CTRL command name typo

Fix typo MCU_UNI_CMD_POWER_CREL to MCU_UNI_CMD_POWER_CTRL.

Fixes: 779d34de055e ("wifi: mt76: connac: add more unified command IDs")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: connac: introduce mt76_connac_mcu_sta_wed_update utility routine

This is a preliminary patch to introduce WED RX support for mt7915.

Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-d

wifi: mt76: connac: introduce mt76_connac_mcu_sta_wed_update utility routine

This is a preliminary patch to introduce WED RX support for mt7915.

Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: connac: add more starec command tags

Add starec tags which will be used in new chipset.
This is a preliminary patch to add mt7996 chipset support.

Signed-off-by: Shayne Chen <shayne.che

wifi: mt76: connac: add more starec command tags

Add starec tags which will be used in new chipset.
This is a preliminary patch to add mt7996 chipset support.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: connac: add more bss info command tags

Add bss info tags which will be used in new chipset.
This is a preliminary patch to add mt7996 chipset support.

Signed-off-by: Shayne Chen <shayne

wifi: mt76: connac: add more bss info command tags

Add bss info tags which will be used in new chipset.
This is a preliminary patch to add mt7996 chipset support.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: connac: introduce unified event table

Add event IDs and related bit fields for unified event support.
This is a preliminary patch to add mt7996 chipset support.

Signed-off-by: Bo Jiao <

wifi: mt76: connac: introduce unified event table

Add event IDs and related bit fields for unified event support.
This is a preliminary patch to add mt7996 chipset support.

Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: connac: add more unified command IDs

Add more unified command IDs which will be used in new chipset.
This is the preliminary patch for mt7996 support.

Signed-off-by: Shayne Chen <shayne

wifi: mt76: connac: add more unified command IDs

Add more unified command IDs which will be used in new chipset.
This is the preliminary patch for mt7996 support.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: connac: rework fields for larger bandwidth support in sta_rec_bf

Rename nrow_bw160 and ncol_bw160 since channel width 320 MHz will share
the same field.
This is a preliminary patch to ad

wifi: mt76: connac: rework fields for larger bandwidth support in sta_rec_bf

Rename nrow_bw160 and ncol_bw160 since channel width 320 MHz will share
the same field.
This is a preliminary patch to add mt7996 chipset support.

Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: connac: update struct sta_rec_phy

For connac3 generation, max_ampdu_len should be filled in
struct sta_rec_phy.
This is a preliminary patch to add mt7996 chipset support.

Signed-off-by:

wifi: mt76: connac: update struct sta_rec_phy

For connac3 generation, max_ampdu_len should be filled in
struct sta_rec_phy.
This is a preliminary patch to add mt7996 chipset support.

Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: connac: rework macros for unified command

Rework some macros for connac3 unified command.
This is a preliminary patch to add mt7996 chipset support.

Signed-off-by: Peter Chiu <chui-hao.

wifi: mt76: connac: rework macros for unified command

Rework some macros for connac3 unified command.
This is a preliminary patch to add mt7996 chipset support.

Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7921: add unified ROC cmd/event support

Add unified ROC cmd/event which is only supported by the newer fw.

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang

wifi: mt76: mt7921: add unified ROC cmd/event support

Add unified ROC cmd/event which is only supported by the newer fw.

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Co-developed-by: Kaikai Hu <kaikai.hu@mediatek.com>
Signed-off-by: Kaikai Hu <kaikai.hu@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...