wifi: mt76: mt7603: fix tx filter/flush function

Setting MT_TX_ABORT does not abort any transmission for a wtbl index on its
own. Instead, it modifies the behavior of a queue flush to make it select

wifi: mt76: mt7603: fix tx filter/flush function

Setting MT_TX_ABORT does not abort any transmission for a wtbl index on its
own. Instead, it modifies the behavior of a queue flush to make it selectively
flush packets for a particular wtbl index.
Adjust powersave filtering to make use of this in order to avoid running into
unnecessary timeouts while flushing

Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7603: rely on shared poll_list field

Rely on poll_list field in mt76_wcid structure and get rid of
private copy.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Fe

wifi: mt76: mt7603: rely on shared poll_list field

Rely on poll_list field in mt76_wcid structure and get rid of
private copy.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: mt7603: rely on shared sta_poll_list and sta_poll_lock

Rely on sta_poll_list and sta_poll_lock fields in mt76_dev structure
and get rid of private copies.

Signed-off-by: Lorenzo Biancon

wifi: mt76: mt7603: rely on shared sta_poll_list and sta_poll_lock

Rely on sta_poll_list and sta_poll_lock fields in mt76_dev structure
and get rid of private copies.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wifi: mt76: add info parameter to rx_skb signature

This is a preliminary patch to introduce WED RX support for mt7915.

Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Lorenzo Bianc

wifi: mt76: add info parameter to rx_skb signature

This is a preliminary patch to introduce WED RX support for mt7915.

Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

mt76: make mt76_update_survey() per phy

Reduce duplicated survey for DBDC.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: report Rx timestamp

Frame reception timestamp (low 32-bits) that indicates the value of the
local TSF timer value at the time the first bit of the MAC header in the
received frame (PPDU unit)

mt76: report Rx timestamp

Frame reception timestamp (low 32-bits) that indicates the value of the
local TSF timer value at the time the first bit of the MAC header in the
received frame (PPDU unit) arriving at the MAC.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

mt76: move mac_work in mt76_core module

Move mac_work delayed_work and mac_work_count in mt76_phy since it is
used by all drivers. This is a preliminary patch to create a common mcu
library used by

mt76: move mac_work in mt76_core module

Move mac_work delayed_work and mac_work_count in mt76_phy since it is
used by all drivers. This is a preliminary patch to create a common mcu
library used by mt7615 and mt7921 drivers

Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

wireless: mt76: convert tasklets to use new tasklet_setup() API

In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet

wireless: mt76: convert tasklets to use new tasklet_setup() API

In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <apais@linux.microsoft.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

mt76: mt7603: tune tx ring size

Stop relying on global tx ring size, reduce size for PS/mgmt queue

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: remove qid argument to drv->tx_complete_skb

It is not needed

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: vif_mask to struct mt76_phy

All drivers use this in pretty much the same way. Moving it to core helps with
some checks for the upcoming testmode support

Signed-off-by: Felix Fietkau <nbd@nbd.

mt76: vif_mask to struct mt76_phy

All drivers use this in pretty much the same way. Moving it to core helps with
some checks for the upcoming testmode support

Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

mt76: mt7603: make dynamic sensitivity adjustment configurable via debugfs

In some cases it may be useful for debugging to disable this feature

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7603: add upper limit for dynamic sensitivity minimum receive power

If the minimum power is raised too much, it can make it impossible for weaker
clients to connect, and there are some scena

mt76: mt7603: add upper limit for dynamic sensitivity minimum receive power

If the minimum power is raised too much, it can make it impossible for weaker
clients to connect, and there are some scenarios where the false detects will
not go down no matter how much the sensitivity is adjusted.
Fixes connectivity issues in some rare cases

Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

mt76: mt7603: increase dma mcu rx ring size

The ring is used for looping back tx powersave filtered frames, so it could
use some more room, in case more than one aggregate was queued

Signed-off-by:

mt76: mt7603: increase dma mcu rx ring size

The ring is used for looping back tx powersave filtered frames, so it could
use some more room, in case more than one aggregate was queued

Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

mt76: move ampdu_ref from mt76_dev to driver struct

It is only used by the driver

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: introduce struct mt76_phy

This is preparation for supporting multiple wiphys per device to support the
concurrent dual-band feature of MT7615D

On the first wiphy, hw->priv will point to struc

mt76: introduce struct mt76_phy

This is preparation for supporting multiple wiphys per device to support the
concurrent dual-band feature of MT7615D

On the first wiphy, hw->priv will point to struct mt76_dev, which contains a
struct mt76_phy at the start. For the secondary wiphy, hw->priv will point
to a mt76_phy encapsulated in a driver specific struct

To simplify access to struct mt76_phy members from drivers, the driver specific
device struct is changed to add a union of struct mt76_dev and struct mt76_phy
as the first element

Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

mt76: mt7603: track tx airtime for airtime fairness and survey

Poll per-station hardware counters after tx status events

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: report rx a-mpdu subframe status

This can be used in monitor mode to figure out which subframes were sent as
part of which A-MPDU

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7603: remove q_rx field from struct mt7603_dev

It is no longer used

Signed-off-by: Felix Fietkau <nbd@nbd.name>

mt76: mt7603: collect aggregation stats

Introduce ampdu_stat entry in mt7603 debugfs in order to dump 802.11
aggr cumulative statistics

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-o

mt76: mt7603: collect aggregation stats

Introduce ampdu_stat entry in mt7603 debugfs in order to dump 802.11
aggr cumulative statistics

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

mt76: mt7603: move survey_time in mt76_dev

Move survey_time field in mt76_dev in order to be reused adding survey
support to mt7615 driver

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signe

mt76: mt7603: move survey_time in mt76_dev

Move survey_time field in mt76_dev in order to be reused adding survey
support to mt7615 driver

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

mt76: move nl80211_dfs_regions in mt76_dev data structure

Move dfs region field in mt76_dev data structure since it is
used by all drivers. This is a preliminary patch to add DFS support to
mt7615 d

mt76: move nl80211_dfs_regions in mt76_dev data structure

Move dfs region field in mt76_dev data structure since it is
used by all drivers. This is a preliminary patch to add DFS support to
mt7615 driver

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

mt76: mt7603: rework and fix tx status reporting

Tx status reporting on mt7603 has a number of issues:

- the hardware can alter the first rate index, but it is not reported to
the driver
- probin

mt76: mt7603: rework and fix tx status reporting

Tx status reporting on mt7603 has a number of issues:

- the hardware can alter the first rate index, but it is not reported to
the driver
- probing is very imprecise, because it alters the per-client rate set,
but only considers info->status.rates for rate selection of a single probe
packet
- short/long GI selection has limitations, which are not accurately reported
to mac80211
- if rates are changed while packets are in flight, tx status reports for
the old rate set might be processed based on the new selection

This led to very suboptimal rate selection with minstrel_ht.

This patch completely reworks tx status reporting to get rid of these
limitations:

- Store the previous and current rate set in the driver + the TSF value
at the time of the switch.
- Use the tx status TSF value to determine which rate set needs to be used
as reference.
- Report only short or long GI rates for a single status event, not a mix.
- The hardware reports the last used rate index. Use it along with the
retry count to figure out what rate was used for the first attempt.
- Use the same retry count value for all rate slots to make this calculation
work.
- Derive the probe rate from the current rateset instead of the skb cb
- Do not wait for a status report for the probe frame before removing the
probe rate from the rate table. Do it immediately after it was referenced
in a tx status report.
- Use the first half of the first rate retry budget for the probe rate
in order to avoid using too many retries on that rate

With this patch, throughput under bad link conditions is improved
significantly, and there is a lot less rate fluctuation going on.

Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

mt76: mt7603: add debugfs knob to enable/disable edcca

Introduce a knob in mt7603 debugfs in order to enable/disable
energy detection based on CCA thresholds

Signed-off-by: Lorenzo Bianconi <lorenz

mt76: mt7603: add debugfs knob to enable/disable edcca

Introduce a knob in mt7603 debugfs in order to enable/disable
energy detection based on CCA thresholds

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...

mt76: move pre_tbtt_tasklet in mt76_dev

Move pre_tbtt_tasklet tasklet in mt76_dev data structure since
it is used by all drivers

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by:

mt76: move pre_tbtt_tasklet in mt76_dev

Move pre_tbtt_tasklet tasklet in mt76_dev data structure since
it is used by all drivers

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>

show more ...