atlatnic: enable Nbase-t speeds with base-t

When 2.5G is advertised, N-Base should be advertised against the T-base
caps. N5G is out of use in baseline code and driver should treat both 5G
and N5G (

atlatnic: enable Nbase-t speeds with base-t

When 2.5G is advertised, N-Base should be advertised against the T-base
caps. N5G is out of use in baseline code and driver should treat both 5G
and N5G (and also 2.5G and N2.5G) equally from user perspective.

Fixes: 5cfd54d7dc186 ("net: atlantic: minimal A2 fw_ops")
Signed-off-by: Nikita Danilov <ndanilov@aquantia.com>
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

ethernet: constify references to netdev->dev_addr in drivers

This big patch sprinkles const on local variables and
function arguments which may refer to netdev->dev_addr.

Commit 406f42fa0d3c ("net-

ethernet: constify references to netdev->dev_addr in drivers

This big patch sprinkles const on local variables and
function arguments which may refer to netdev->dev_addr.

Commit 406f42fa0d3c ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Some of the changes here are not strictly required - const
is sometimes cast off but pointer is not used for writing.
It seems like it's still better to add the const in case
the code changes later or relevant -W flags get enabled
for the build.

No functional changes.

Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

atlatnic: enable Nbase-t speeds with base-t

commit aa685acd98eae25d5351e30288d6cfb65b9c80a5 upstream.

When 2.5G is advertised, N-Base should be advertised against the T-base
caps. N5G is out of use

atlatnic: enable Nbase-t speeds with base-t

commit aa685acd98eae25d5351e30288d6cfb65b9c80a5 upstream.

When 2.5G is advertised, N-Base should be advertised against the T-base
caps. N5G is out of use in baseline code and driver should treat both 5G
and N5G (and also 2.5G and N2.5G) equally from user perspective.

Fixes: 5cfd54d7dc186 ("net: atlantic: minimal A2 fw_ops")
Signed-off-by: Nikita Danilov <ndanilov@aquantia.com>
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

net: atlantic: implement media detect feature via phy tunables

Mediadetect is another name for the EDPD (energy detect power down).
This feature allows device to save extra power when no link is ava

net: atlantic: implement media detect feature via phy tunables

Mediadetect is another name for the EDPD (energy detect power down).
This feature allows device to save extra power when no link is available.

PHY goes into the extreme power saving mode and only periodically wakes up
and checks for the link.

AQC devices has fixed check period of 6 seconds

The feature may increase linkup time.

Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: atlantic: implement phy downshift feature

PHY downshift allows phy to try renegotiate if link is unstable
and can carry higher speed.

AQC devices has integrated PHY which is controlled by MAC

net: atlantic: implement phy downshift feature

PHY downshift allows phy to try renegotiate if link is unstable
and can carry higher speed.

AQC devices has integrated PHY which is controlled by MAC firmware.
Thus, driver defines new ethtool callbacks to implement phy tunables
via netdev.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: atlantic: add hwmon getter for MAC temperature

This patch adds the possibility to obtain MAC temperature via hwmon.
On A1 there are two separate temperature sensors.
On A2 there's only one temp

net: atlantic: add hwmon getter for MAC temperature

This patch adds the possibility to obtain MAC temperature via hwmon.
On A1 there are two separate temperature sensors.
On A2 there's only one temperature sensor, which is used for reporting
both MAC and PHY temperature.

Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: atlantic: A2: half duplex support

This patch adds support for 10M/100M/1G half duplex rates, which are
supported by A2 in additional to full duplex rates supported by A1.

Signed-off-by: Igor R

net: atlantic: A2: half duplex support

This patch adds support for 10M/100M/1G half duplex rates, which are
supported by A2 in additional to full duplex rates supported by A1.

Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: atlantic: unify MAC generation

This patch unifies invalid MAC address handling with other drivers.

Basically we've switched to using standard APIs (is_valid_ether_addr /
eth_hw_addr_random) wh

net: atlantic: unify MAC generation

This patch unifies invalid MAC address handling with other drivers.

Basically we've switched to using standard APIs (is_valid_ether_addr /
eth_hw_addr_random) where possible.
It's worth noting that some of engineering Aquantia NICs might be
provisioned with a partially zeroed out MAC, which is still invalid,
but not caught by is_valid_ether_addr(), so we've added a special
handling for this case.

Also adding a warning in case of fallback to random MAC, because
this shouldn't be needed on production NICs, they should all be
provisioned with unique MAC.

NB! Default systemd/udevd configuration is 'MACAddressPolicy=persistent'.
This causes MAC address to be persisted across driver reloads and
reboots. We had to change it to 'none' for verification purposes.

Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: atlantic: rename AQ_NIC_RATE_2GS to AQ_NIC_RATE_2G5

This patch changes the constant name to a more logical "2G5"
(for 2.5G speeds).

Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
S

net: atlantic: rename AQ_NIC_RATE_2GS to AQ_NIC_RATE_2G5

This patch changes the constant name to a more logical "2G5"
(for 2.5G speeds).

Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

show more ...

net: atlantic: MACSec offload skeleton

This patch adds basic functionality for MACSec offloading for Atlantic
NICs.

MACSec offloading functionality is enabled if network card has
appropriate FW tha

net: atlantic: MACSec offload skeleton

This patch adds basic functionality for MACSec offloading for Atlantic
NICs.

MACSec offloading functionality is enabled if network card has
appropriate FW that has MACSec offloading enabled in config.

Actual functionality (ingress, egress, etc) will be added in follow-up
patches.

Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: Mark Starovoytov <mstarovoitov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: atlantic: ptp gpio adjustments

Clock adjustment data should be passed to FW as well, otherwise in some
cases a drift was observed when using GPIO features.

Signed-off-by: Egor Pomozov <epomozo

net: atlantic: ptp gpio adjustments

Clock adjustment data should be passed to FW as well, otherwise in some
cases a drift was observed when using GPIO features.

Signed-off-by: Egor Pomozov <epomozov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: atlantic: update flow control logic

We now differentiate requested and negotiated flow control
modes. Therefore `ethtool -A` now operates on local requested
FC values, and regular link settings

net: atlantic: update flow control logic

We now differentiate requested and negotiated flow control
modes. Therefore `ethtool -A` now operates on local requested
FC values, and regular link settings shows the negotiated FC
settings.

Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: atlantic: code style cleanup

Thats a pure checkpatck walkthrough the code with no functional
changes. Reverse christmas tree, spacing, etc.

Signed-off-by: Nikita Danilov <ndanilov@marvell.com>

net: atlantic: code style cleanup

Thats a pure checkpatck walkthrough the code with no functional
changes. Reverse christmas tree, spacing, etc.

Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: atlantic: loopback tests via private flags

Here we add a number of ethtool private flags
to allow enabling various loopbacks on HW.

Thats useful for verification and bringup works.

Signed-off

net: atlantic: loopback tests via private flags

Here we add a number of ethtool private flags
to allow enabling various loopbacks on HW.

Thats useful for verification and bringup works.

Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: atlantic: add fw configuration memory area

Device FW has a separate memory area where various
config fields are stored and could be used by the
driver.

Here we modify download/upload infrastru

net: atlantic: add fw configuration memory area

Device FW has a separate memory area where various
config fields are stored and could be used by the
driver.

Here we modify download/upload infrastructure to
allow accessing this area.

Lateron this will be used to configure various behaviours

Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: atlantic: adding ethtool physical identification

`ethtool -p eth0` will blink leds helping identify
physical port.

Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Igor Russ

net: atlantic: adding ethtool physical identification

`ethtool -p eth0` will blink leds helping identify
physical port.

Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: atlantic: implement wake_phy feature

Wake on PHY allows to configure device to wakeup host
as soon as PHY link status is changed to active.

Signed-off-by: Nikita Danilov <ndanilov@marvell.com>

net: atlantic: implement wake_phy feature

Wake on PHY allows to configure device to wakeup host
as soon as PHY link status is changed to active.

Signed-off-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: aquantia: add basic ptp_clock callbacks

Basic HW functions implemented for adjusting frequency,
adjusting time, getting and setting time.
With these callbacks we now do register ptp clock in th

net: aquantia: add basic ptp_clock callbacks

Basic HW functions implemented for adjusting frequency,
adjusting time, getting and setting time.
With these callbacks we now do register ptp clock in the system.

Firmware interface parts are defined for PTP requests and interactions.
Enable/disable PTP counters in HW on clock register/unregister.

Signed-off-by: Egor Pomozov <epomozov@marvell.com>
Co-developed-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com>
Signed-off-by: Sergey Samoilenko <sergey.samoilenko@aquantia.com>
Co-developed-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: aquantia: temperature retrieval fix

Chip temperature is a two byte word, colocated internally with cable
length data. We do all readouts from HW memory by dwords, thus
we should clear extra hig

net: aquantia: temperature retrieval fix

Chip temperature is a two byte word, colocated internally with cable
length data. We do all readouts from HW memory by dwords, thus
we should clear extra high bytes, otherwise temperature output
gets weird as soon as we attach a cable to the NIC.

Fixes: 8f8940118654 ("net: aquantia: add infrastructure to readout chip temperature")
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: aquantia: fix wol configuration not applied sometimes

WoL magic packet configuration sometimes does not work due to
couple of leakages found.

Mainly there was a regression introduced during re

net: aquantia: fix wol configuration not applied sometimes

WoL magic packet configuration sometimes does not work due to
couple of leakages found.

Mainly there was a regression introduced during readx_poll refactoring.

Next, fw request waiting time was too small. Sometimes that
caused sleep proxy config function to return with an error
and to skip WoL configuration.
At last, WoL data were passed to FW from not clean buffer.
That could cause FW to accept garbage as a random configuration data.

Fixes: 6a7f2277313b ("net: aquantia: replace AQ_HW_WAIT_FOR with readx_poll_timeout_atomic")
Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms and c

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422

Based on 1 normalized pattern(s):

this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 101 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

net: aquantia: add infrastructure to readout chip temperature

Ability to read the chip temperature from memory
via hwmon interface

Signed-off-by: Yana Esina <yana.esina@aquantia.com>
Signed-off-by:

net: aquantia: add infrastructure to readout chip temperature

Ability to read the chip temperature from memory
via hwmon interface

Signed-off-by: Yana Esina <yana.esina@aquantia.com>
Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: aquantia: use better wrappers for state registers

Replace some direct registers reads with better
online functions.

Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: I

net: aquantia: use better wrappers for state registers

Replace some direct registers reads with better
online functions.

Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: aquantia: replace AQ_HW_WAIT_FOR with readx_poll_timeout_atomic

David noticed the original define was hiding 'err' variable
reference. Thats confusing and counterintuitive.

Andrew noted the wh

net: aquantia: replace AQ_HW_WAIT_FOR with readx_poll_timeout_atomic

David noticed the original define was hiding 'err' variable
reference. Thats confusing and counterintuitive.

Andrew noted the whole macro could be replaced with standard readx_poll
kernel macro. This makes code more readable.

Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: aquantia: synchronized flow control between mac/phy

Flow control statuses were not synchronized between blocks,
that caused packets/link drop on some corner cases, when
MAC sent PFC although Ph

net: aquantia: synchronized flow control between mac/phy

Flow control statuses were not synchronized between blocks,
that caused packets/link drop on some corner cases, when
MAC sent PFC although Phy was not expecting these to come.

Driver should readout the negotiated FC from phy and
configure RX block accordigly.

This is done on each link change event with information from FW.

Fixes: 288551de45aa ("net: aquantia: Implement rx/tx flow control ethtools callback")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...