iio:st-sensors: Move exports into IIO_ST_SENSORS namespace

To avoid unnecessary pollution of the global symbol namespace move the
driver core and type specific core exports into their a new namespac

iio:st-sensors: Move exports into IIO_ST_SENSORS namespace

To avoid unnecessary pollution of the global symbol namespace move the
driver core and type specific core exports into their a new namespace
and import that where needed.

For more info see https://lwn.net/Articles/760045/

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Link: https://lore.kernel.org/r/20220116180535.2367780-14-jic23@kernel.org

show more ...

iio: st_sensors: remove all driver remove functions

At this point all ST driver remove functions do iio_device_unregister().
This change removes them from them and replaces all iio_device_register()

iio: st_sensors: remove all driver remove functions

At this point all ST driver remove functions do iio_device_unregister().
This change removes them from them and replaces all iio_device_register()
with devm_iio_device_register().

This can be done in a single change relatively easy, since all these remove
functions are define in st_sensors.h.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210823112204.243255-5-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: st_sensors: remove st_sensors_power_disable() function

This change converts the st_sensors_power_enable() function to use
devm_add_action_or_reset() handlers to register regulator_disable hooks

iio: st_sensors: remove st_sensors_power_disable() function

This change converts the st_sensors_power_enable() function to use
devm_add_action_or_reset() handlers to register regulator_disable hooks for
when the drivers get unloaded.

The parent device of the IIO device object is used. This is based on the
assumption that all other devm_ calls in the ST sensors use this reference.

This makes the st_sensors_power_disable() un-needed.
Removing this also changes unload order a bit, as all ST drivers would call
st_sensors_power_disable() first and iio_device_unregister() after that.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210823112204.243255-4-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: st_sensors: disable regulators after device unregistration

Up until commit ea7e586bdd331 ("iio: st_sensors: move regulator retrieveal
to core") only the ST pressure driver seems to have had any

iio: st_sensors: disable regulators after device unregistration

Up until commit ea7e586bdd331 ("iio: st_sensors: move regulator retrieveal
to core") only the ST pressure driver seems to have had any regulator
disable. After that commit, the regulator handling was moved into the
common st_sensors logic.

In all instances of this regulator handling, the regulators were disabled
before unregistering the IIO device.
This can cause issues where the device would be powered down and still be
available to userspace, allowing it to send invalid/garbage data.

This change moves the st_sensors_power_disable() after the common probe
functions. These common probe functions also handle unregistering the IIO
device.

Fixes: 774487611c949 ("iio: pressure-core: st: Provide support for the Vdd power supply")
Fixes: ea7e586bdd331 ("iio: st_sensors: move regulator retrieveal to core")
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Denis CIOCCA <denis.ciocca@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210823112204.243255-2-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: st_sensors: disable regulators after device unregistration

[ Upstream commit 9f0b3e0cc0c88618aa9e5cecef747b1337ae0a5d ]

Up until commit ea7e586bdd331 ("iio: st_sensors: move regulator retrieve

iio: st_sensors: disable regulators after device unregistration

[ Upstream commit 9f0b3e0cc0c88618aa9e5cecef747b1337ae0a5d ]

Up until commit ea7e586bdd331 ("iio: st_sensors: move regulator retrieveal
to core") only the ST pressure driver seems to have had any regulator
disable. After that commit, the regulator handling was moved into the
common st_sensors logic.

In all instances of this regulator handling, the regulators were disabled
before unregistering the IIO device.
This can cause issues where the device would be powered down and still be
available to userspace, allowing it to send invalid/garbage data.

This change moves the st_sensors_power_disable() after the common probe
functions. These common probe functions also handle unregistering the IIO
device.

Fixes: 774487611c949 ("iio: pressure-core: st: Provide support for the Vdd power supply")
Fixes: ea7e586bdd331 ("iio: st_sensors: move regulator retrieveal to core")
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Denis CIOCCA <denis.ciocca@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210823112204.243255-2-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

iio: st-sensors: Remove some unused includes and add some that should be there

The st-sensors drivers have changed in structure over time, and includes
have not always kept up with this. Let's brin

iio: st-sensors: Remove some unused includes and add some that should be there

The st-sensors drivers have changed in structure over time, and includes
have not always kept up with this. Let's bring them back to nearer
the ideal.

Identified with the include-what-you-use tool and careful checking of
its suggestions.

Note I haven't been particularly aggressive here, so this is just the
cases where the include obviously isn't needed rather than the more
subtle corners.

Note I took the opportunity to add mod_devicetable.h as I generally
prefer to see that when acpi or of match tables are present.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210608175149.4019289-1-jic23@kernel.org

show more ...

iio: st_sensors: Call st_sensors_power_enable() from bus drivers

In case we would initialize two IIO devices from one physical device,
we shouldn't have a clash on regulators. That's why move
st_sen

iio: st_sensors: Call st_sensors_power_enable() from bus drivers

In case we would initialize two IIO devices from one physical device,
we shouldn't have a clash on regulators. That's why move
st_sensors_power_enable() call from core to bus drivers.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210414195454.84183-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: st_sensors: Make use of device properties

Device property API allows to gather device resources from different sources,
such as ACPI. Convert the drivers to unleash the power of device property

iio: st_sensors: Make use of device properties

Device property API allows to gather device resources from different sources,
such as ACPI. Convert the drivers to unleash the power of device property API.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: st_sensors: Drop redundant parameter from st_sensors_of_name_probe()

Since we have access to the struct device_driver and thus to the ID table,
there is no need to supply special parameters to

iio: st_sensors: Drop redundant parameter from st_sensors_of_name_probe()

Since we have access to the struct device_driver and thus to the ID table,
there is no need to supply special parameters to st_sensors_of_name_probe().

Besides that we have a common API to get driver match data, there is
no need to do matching separately for OF and ACPI.

Taking into consideration above, simplify the ST sensors code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: move 3-wire spi initialization to st_sensors_spi

Some devices need to be configured with special bit in order to
use spi 3-wire. This was done during device identification phase.
Instead, let's

iio: move 3-wire spi initialization to st_sensors_spi

Some devices need to be configured with special bit in order to
use spi 3-wire. This was done during device identification phase.
Instead, let's move this part as spi specific.
Doing this the check_device_support function becomes a simple
device id check, so let's rename it.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio:gyro: device settings are set immediately during probe

This patch set gyro settings right after probe start. This is
done in preparation of regmap that needs different configuration
based on mul

iio:gyro: device settings are set immediately during probe

This patch set gyro settings right after probe start. This is
done in preparation of regmap that needs different configuration
based on multiread bit value.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177

Based on 1 normalized pattern(s):

licensed under the gpl 2

extracted by the scancode license scanner the SPDX license identifie

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177

Based on 1 normalized pattern(s):

licensed under the gpl 2

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 135 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528170026.071193225@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

iio: gyro: st_gyro_spi: add OF capability to st_gyro_spi

Add device tree support for L3G4200D, LSM330D, LSM330DL, LSM330DLC,
L3GD20, L3GD20H, L3G4IS, LSM330, LSM9DS0 gyroscope sensors

Signed-off-by

iio: gyro: st_gyro_spi: add OF capability to st_gyro_spi

Add device tree support for L3G4200D, LSM330D, LSM330DL, LSM330DLC,
L3GD20, L3GD20H, L3G4IS, LSM330, LSM9DS0 gyroscope sensors

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

show more ...

iio: gyro: st_gyro: fix L3GD20H support

Add proper support for L3GD20H gyroscope sensor. In particular:
- use L3GD20H as device name instead of L3GD20
- fix available full scales
- fix available sam

iio: gyro: st_gyro: fix L3GD20H support

Add proper support for L3GD20H gyroscope sensor. In particular:
- use L3GD20H as device name instead of L3GD20
- fix available full scales
- fix available sample frequencies

Note that the original patch listed first below introduced broken support for
this part. The second patch drops the support as it didn't work.

This new patch brings in working support.

Fixes: 9444a300c2be (IIO: Add support for L3GD20H gyroscope)
Fixes: a0657716416f ("iio:gyro: bug on L3GD20H gyroscope support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

show more ...

iio: st_gyro: Add lsm9ds0-gyro support

This device has an identical interface to other supported sensors and the patch
only adds IDs.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>

iio: st_gyro: Add lsm9ds0-gyro support

This device has an identical interface to other supported sensors and the patch
only adds IDs.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

show more ...

spi: Drop owner assignment from spi_drivers

An spi_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Jonathan Came

spi: Drop owner assignment from spi_drivers

An spi_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

iio:common: Set the device pointer into ST common sensors library

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio:gyro: Removed unnecessary parameter on common_probe function

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio:gyro: bug on L3GD20H gyroscope support

The driver was not able to manage the sensor: during probe function
and wai check, the driver stops and writes: "device name and WhoAmI mismatch."
The corr

iio:gyro: bug on L3GD20H gyroscope support

The driver was not able to manage the sensor: during probe function
and wai check, the driver stops and writes: "device name and WhoAmI mismatch."
The correct value of L3GD20H wai is 0xd7 instead of 0xd4.
Dropped support for the sensor.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

show more ...

iio: gyro: st_gyro: Use devm_iio_device_alloc

Using devm_iio_device_alloc makes code simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off

iio: gyro: st_gyro: Use devm_iio_device_alloc

Using devm_iio_device_alloc makes code simpler.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

show more ...

iio: Added ST-sensors platform data to select the DRDY interrupt pin

This patch add support to redirect the DRDY interrupt on INT1 or INT2
on accelerometer and pressure sensors.

Signed-off-by: Deni

iio: Added ST-sensors platform data to select the DRDY interrupt pin

This patch add support to redirect the DRDY interrupt on INT1 or INT2
on accelerometer and pressure sensors.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

show more ...

iio:st_sensors fix build when !CONFIG_IIO_TRIGGER

Partly a case of removing unused headers and partly a case
of ifdefing out the iio_trigger_ops structures. This has
come about because of an 'unusu

iio:st_sensors fix build when !CONFIG_IIO_TRIGGER

Partly a case of removing unused headers and partly a case
of ifdefing out the iio_trigger_ops structures. This has
come about because of an 'unusual' separation of code in this
driver.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Denis Ciocca <denis.ciocca@st.com>

show more ...

iio:gyro: Add STMicroelectronics gyroscopes driver

This patch adds a generic gyroscope driver for STMicroelectronics
gyroscopes, currently it supports:
L3G4200D, LSM330DL, L3GD20, L3GD20H, LSM330DLC

iio:gyro: Add STMicroelectronics gyroscopes driver

This patch adds a generic gyroscope driver for STMicroelectronics
gyroscopes, currently it supports:
L3G4200D, LSM330DL, L3GD20, L3GD20H, LSM330DLC, L3G4IS, LSM330.

Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

show more ...

iio: st_sensors: Make use of device properties

Device property API allows to gather device resources from different sources,
such as ACPI. Convert the drivers to unleash the power of dev

iio: st_sensors: Make use of device properties

Device property API allows to gather device resources from different sources,
such as ACPI. Convert the drivers to unleash the power of device property API.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

iio: st_sensors: Drop redundant parameter from st_sensors_of_name_probe()

Since we have access to the struct device_driver and thus to the ID table,
there is no need to supply special pa

iio: st_sensors: Drop redundant parameter from st_sensors_of_name_probe()

Since we have access to the struct device_driver and thus to the ID table,
there is no need to supply special parameters to st_sensors_of_name_probe().

Besides that we have a common API to get driver match data, there is
no need to do matching separately for OF and ACPI.

Taking into consideration above, simplify the ST sensors code.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...