drm/mediatek: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error

drm/mediatek: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert the mediatek drm drivers from always returning zero in
the remove callback to the void returning variant.

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230801110239.831099-8-u.kleine-koenig@pengutronix.de/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

show more ...

drm/mediatek: Fix return type of mtk_hdmi_bridge_mode_valid()

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
p

drm/mediatek: Fix return type of mtk_hdmi_bridge_mode_valid()

With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:

drivers/gpu/drm/mediatek/mtk_hdmi.c:1407:16: error: incompatible function pointer types initializing 'enum drm_mode_status (*)(struct drm_bridge *, const struct drm_display_info *, const struct drm_display_mode *)' with an expression of type 'int (struct drm_bridge *, const struct drm_display_info *, const struct drm_display_mode *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.mode_valid = mtk_hdmi_bridge_mode_valid,
^~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.

->mode_valid() in 'struct drm_bridge_funcs' expects a return type of
'enum drm_mode_status', not 'int'. Adjust the return type of
mtk_hdmi_bridge_mode_valid() to match the prototype's to resolve the
warning and CFI failure.

Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

show more ...

drm/mtk: Use drm_mode_init() for on-stack modes

Initialize on-stack modes with drm_mode_init() to guarantee
no stack garbage in the list head.

Based on the following cocci script, with manual fixup

drm/mtk: Use drm_mode_init() for on-stack modes

Initialize on-stack modes with drm_mode_init() to guarantee
no stack garbage in the list head.

Based on the following cocci script, with manual fixups:
@decl@
identifier M;
expression E;
@@
- struct drm_display_mode M = E;
+ struct drm_display_mode M;

@@
identifier decl.M;
expression decl.E;
statement S, S1;
@@
struct drm_display_mode M;
... when != S
+ drm_mode_init(&M, &E);
+
S1

@@
expression decl.E;
@@
- &*E
+ E

Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221107192545.9896-6-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

drm/mediatek: Drop of_gpio header

These drivers include the deprecated OF GPIO header <linux/of_gpio.h>
yet fail to use symbols from it, so drop the include.

Cc: Chun-Kuang Hu <chunkuang.hu@kernel.

drm/mediatek: Drop of_gpio header

These drivers include the deprecated OF GPIO header <linux/of_gpio.h>
yet fail to use symbols from it, so drop the include.

Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220812205746.609107-3-mairacanal@riseup.net/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

show more ...

drm/mediatek: hdmi: Perform NULL pointer check for mtk_hdmi_conf

In commit 41ca9caaae0b
("drm/mediatek: hdmi: Add check for CEA modes only") a check
for CEA modes was added to function mtk_hdmi_brid

drm/mediatek: hdmi: Perform NULL pointer check for mtk_hdmi_conf

In commit 41ca9caaae0b
("drm/mediatek: hdmi: Add check for CEA modes only") a check
for CEA modes was added to function mtk_hdmi_bridge_mode_valid()
in order to address possible issues on MT8167;
moreover, with commit c91026a938c2
("drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock")
another similar check was introduced.

Unfortunately though, at the time of writing, MT8173 does not provide
any mtk_hdmi_conf structure and this is crashing the kernel with NULL
pointer upon entering mtk_hdmi_bridge_mode_valid(), which happens as
soon as a HDMI cable gets plugged in.

To fix this regression, add a NULL pointer check for hdmi->conf in the
said function, restoring HDMI functionality and avoiding NULL pointer
kernel panics.

Fixes: 41ca9caaae0b ("drm/mediatek: hdmi: Add check for CEA modes only")
Fixes: c91026a938c2 ("drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

show more ...

drm/mediatek: hdmi: Perform NULL pointer check for mtk_hdmi_conf

[ Upstream commit 3b8e19a0aa3933a785be9f1541afd8d398c4ec69 ]

In commit 41ca9caaae0b
("drm/mediatek: hdmi: Add check for CEA modes on

drm/mediatek: hdmi: Perform NULL pointer check for mtk_hdmi_conf

[ Upstream commit 3b8e19a0aa3933a785be9f1541afd8d398c4ec69 ]

In commit 41ca9caaae0b
("drm/mediatek: hdmi: Add check for CEA modes only") a check
for CEA modes was added to function mtk_hdmi_bridge_mode_valid()
in order to address possible issues on MT8167;
moreover, with commit c91026a938c2
("drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock")
another similar check was introduced.

Unfortunately though, at the time of writing, MT8173 does not provide
any mtk_hdmi_conf structure and this is crashing the kernel with NULL
pointer upon entering mtk_hdmi_bridge_mode_valid(), which happens as
soon as a HDMI cable gets plugged in.

To fix this regression, add a NULL pointer check for hdmi->conf in the
said function, restoring HDMI functionality and avoiding NULL pointer
kernel panics.

Fixes: 41ca9caaae0b ("drm/mediatek: hdmi: Add check for CEA modes only")
Fixes: c91026a938c2 ("drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

drm/bridge: Centralize error message when bridge attach fails

Being informed of a failure to attach a bridge is useful, and many
drivers prints an error message in that case. Move the message to
drm

drm/bridge: Centralize error message when bridge attach fails

Being informed of a failure to attach a bridge is useful, and many
drivers prints an error message in that case. Move the message to
drm_bridge_attach() to avoid code duplication.

Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>

show more ...

drm/mediatek: hdmi: Add MT8167 configuration

The MT8167 SoC have a hard limit on the maximal supported
HDMI TMDS clock, and is not validated and supported for
HDMI modes out of HDMI CEA modes, so ad

drm/mediatek: hdmi: Add MT8167 configuration

The MT8167 SoC have a hard limit on the maximal supported
HDMI TMDS clock, and is not validated and supported for
HDMI modes out of HDMI CEA modes, so add a configuration entry
linked to the MT8167 compatible.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

show more ...

drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock

Some SoCs like the MT8167 have a hard limit on the maximal
supported HDMI TMDS clock, so add a configuration value to
filter out tho

drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock

Some SoCs like the MT8167 have a hard limit on the maximal
supported HDMI TMDS clock, so add a configuration value to
filter out those modes.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

show more ...

drm/mediatek: hdmi: Add check for CEA modes only

Some SoCs like the MT8167 are not validated and supported for
HDMI modes out of HDMI CEA modes, so add a configuration boolean
to filter out non-CEA

drm/mediatek: hdmi: Add check for CEA modes only

Some SoCs like the MT8167 are not validated and supported for
HDMI modes out of HDMI CEA modes, so add a configuration boolean
to filter out non-CEA modes.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

show more ...

drm/mediatek: Don't support hdmi connector creation

commit f01195148967 ("drm/mediatek: mtk_dpi: Create connector for bridges")
broke the display support for elm device since mtk_dpi calls
drm_bridg

drm/mediatek: Don't support hdmi connector creation

commit f01195148967 ("drm/mediatek: mtk_dpi: Create connector for bridges")
broke the display support for elm device since mtk_dpi calls
drm_bridge_attach with the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR
while mtk_hdmi does not yet support this flag.

Fix this by accepting DRM_BRIDGE_ATTACH_NO_CONNECTOR in bridge attachment.
Implement the drm_bridge_funcs .detect() and .get_edid() operations, and
call drm_bridge_hpd_notify() to report HPD. This provides the
necessary API to support disabling connector creation.

In addition, the field 'conn' is removed from the mtk_hdmi struct since
mtk_hdmi don't create a connector. It is replaced with a pointer
'curr_conn' that points to the current connector which can be access
through the global state.

This patch is inspired by a similar patch for bridge/synopsys/dw-hdmi.c:
commit ec971aaa6775
("drm: bridge: dw-hdmi: Make connector creation optional")
But with the difference that in mtk-hdmi only the option of not creating
a connector is supported.

Fixes: f01195148967 ("drm/mediatek: mtk_dpi: Create connector for bridges")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

show more ...

drm/mediatek: Switch the hdmi bridge ops to the atomic versions

The bridge operation '.enable' and the audio cb '.get_eld'
access hdmi->conn. In the future we will want to support
the flag DRM_BRIDG

drm/mediatek: Switch the hdmi bridge ops to the atomic versions

The bridge operation '.enable' and the audio cb '.get_eld'
access hdmi->conn. In the future we will want to support
the flag DRM_BRIDGE_ATTACH_NO_CONNECTOR and then we will
not have direct access to the connector.
The atomic version '.atomic_enable' allows accessing the
current connector from the state.
This patch switches the bridge to the atomic version to
prepare access to the connector in later patches.

Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

show more ...

drm/mediatek: Add missing MODULE_DEVICE_TABLE()

This patch adds the missing MODULE_DEVICE_TABLE definitions on different
Mediatek drivers which generates correct modalias for automatic loading
when

drm/mediatek: Add missing MODULE_DEVICE_TABLE()

This patch adds the missing MODULE_DEVICE_TABLE definitions on different
Mediatek drivers which generates correct modalias for automatic loading
when these drivers are compiled as an external module.

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

show more ...

drm/mediatek: Optimize functions which do not need to return

Function mtk_hdmi_aud_set_input always return 0, no need to
keep the return value. Functions mtk_hdmi_aud_enable_packet &
mtk_hdmi_aud_on

drm/mediatek: Optimize functions which do not need to return

Function mtk_hdmi_aud_set_input always return 0, no need to
keep the return value. Functions mtk_hdmi_aud_enable_packet &
mtk_hdmi_aud_on_off_hw_ncts are the same, these two functions
just call next functions. Maybe it`s a bit better to just call
the inner function.

Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

show more ...

drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata()

if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have
a corresponding put_device(). Thus add jump target to fi

drm/mediatek: Add missing put_device() call in mtk_hdmi_dt_parse_pdata()

if of_find_device_by_node() succeed, mtk_drm_kms_init() doesn't have
a corresponding put_device(). Thus add jump target to fix the exception
handling for this function implementation.

Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

show more ...

drm/mediatek: Separate mtk_hdmi_phy to an independent module

mtk_hdmi_phy is a part of mtk_hdmi module, but phy driver should be an
independent module rather than be part of drm module, so separate

drm/mediatek: Separate mtk_hdmi_phy to an independent module

mtk_hdmi_phy is a part of mtk_hdmi module, but phy driver should be an
independent module rather than be part of drm module, so separate the phy
driver to an independent module.

Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de>

show more ...

drm/mediatek: Move tz_disabled from mtk_hdmi_phy to mtk_hdmi driver

tz_disabled is used to control mtk_hdmi output signal, but this variable
is stored in mtk_hdmi_phy and mtk_hdmi_phy does not use i

drm/mediatek: Move tz_disabled from mtk_hdmi_phy to mtk_hdmi driver

tz_disabled is used to control mtk_hdmi output signal, but this variable
is stored in mtk_hdmi_phy and mtk_hdmi_phy does not use it. So move
tz_disabled to mtk_hdmi where it's used.

Signed-off-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de>

show more ...

ASoC: hdmi-codec: merge .digital_mute() into .mute_stream()

snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only h

ASoC: hdmi-codec: merge .digital_mute() into .mute_stream()

snd_soc_dai_digital_mute() is internally using both
mute_stream() (1) or digital_mute() (2), but the difference between
these 2 are only handling direction.
We can merge digital_mute() into mute_stream

int snd_soc_dai_digital_mute(xxx, int direction)
{
...
else if (dai->driver->ops->mute_stream)
(1) return dai->driver->ops->mute_stream(xxx, direction);
else if (direction == SNDRV_PCM_STREAM_PLAYBACK &&
dai->driver->ops->digital_mute)
(2) return dai->driver->ops->digital_mute(xxx);
...
}

For hdmi-codec, we need to update struct hdmi_codec_ops,
and all its users in the same time.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/87d055xxj2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

drm/mediatek: mtk_hdmi: Remove debug messages for function calls

Equivalent information can be nowadays obtained using function tracer

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabor

drm/mediatek: mtk_hdmi: Remove debug messages for function calls

Equivalent information can be nowadays obtained using function tracer

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

show more ...

drm: Nuke mode->vrefresh

Get rid of mode->vrefresh and just calculate it on demand. Saves
a bit of space and avoids the cached value getting out of sync
with reality.

Mostly done with cocci, with t

drm: Nuke mode->vrefresh

Get rid of mode->vrefresh and just calculate it on demand. Saves
a bit of space and avoids the cached value getting out of sync
with reality.

Mostly done with cocci, with the following manual fixups:
- Remove the now empty loop in drm_helper_probe_single_connector_modes()
- Fix __MODE() macro in ch7006_mode.c
- Fix DRM_MODE_ARG() macro in drm_modes.h
- Remove leftover comment from samsung_s6d16d0_mode
- Drop the TODO

@@
@@
struct drm_display_mode {
...
- int vrefresh;
...
};

@@
identifier N;
expression E;
@@
struct drm_display_mode N = {
- .vrefresh = E
};

@@
identifier N;
expression E;
@@
struct drm_display_mode N[...] = {
...,
{
- .vrefresh = E
}
,...
};

@@
expression E;
@@
{
DRM_MODE(...),
- .vrefresh = E,
}

@@
identifier M, R;
@@
int drm_mode_vrefresh(const struct drm_display_mode *M)
{
...
- if (M->vrefresh > 0)
- R = M->vrefresh;
- else
if (...) {
...
}
...
}

@@
struct drm_display_mode *p;
expression E;
@@
(
- p->vrefresh = E;
|
- p->vrefresh
+ drm_mode_vrefresh(p)
)

@@
struct drm_display_mode s;
expression E;
@@
(
- s.vrefresh = E;
|
- s.vrefresh
+ drm_mode_vrefresh(&s)
)

@@
expression E;
@@
- drm_mode_vrefresh(E) ? drm_mode_vrefresh(E) : drm_mode_vrefresh(E)
+ drm_mode_vrefresh(E)

@find_substruct@
identifier X;
identifier S;
@@
struct X {
...
struct drm_display_mode S;
...
};

@@
identifier find_substruct.S;
expression E;
identifier I;
@@
{
.S = {
- .vrefresh = E
}
}

@@
identifier find_substruct.S;
identifier find_substruct.X;
expression E;
identifier I;
@@
struct X I[...] = {
...,
.S = {
- .vrefresh = E
}
,...
};

v2: Drop TODO
v3: Rebase
v4: Rebase

Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Stefan Mavrodiev <stefan@olimex.com>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: "Guido Günther" <agx@sigxcpu.org>
Cc: Purism Kernel Team <kernel@puri.sm>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: linux-amlogic@lists.infradead.org
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-4-ville.syrjala@linux.intel.com

show more ...

drm/mediatek: Eliminate the magic number in array size

Eiminate the magic number in array size, there macro defines in
hdmi.h.

Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Chun-Kua

drm/mediatek: Eliminate the magic number in array size

Eiminate the magic number in array size, there macro defines in
hdmi.h.

Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

show more ...

drm/mediatek: Cleanup coding style in mediatek a bit

This code change is to make code bit more readable.

Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@ke

drm/mediatek: Cleanup coding style in mediatek a bit

This code change is to make code bit more readable.

Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

show more ...

drm/mediatek: Omit warning on probe defers

It can happen that the mmsys clock drivers aren't probed before the
platform driver gets invoked. The platform driver used to print a warning
that the driv

drm/mediatek: Omit warning on probe defers

It can happen that the mmsys clock drivers aren't probed before the
platform driver gets invoked. The platform driver used to print a warning
that the driver failed to get the clocks. Omit this error on
the defered probe path.

Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

show more ...

drm/bridge: Extend bridge API to disable connector creation

Most bridge drivers create a DRM connector to model the connector at the
output of the bridge. This model is historical and has worked pre

drm/bridge: Extend bridge API to disable connector creation

Most bridge drivers create a DRM connector to model the connector at the
output of the bridge. This model is historical and has worked pretty
well so far, but causes several issues:

- It prevents supporting more complex display pipelines where DRM
connector operations are split over multiple components. For instance a
pipeline with a bridge connected to the DDC signals to read EDID data,
and another one connected to the HPD signal to detect connection and
disconnection, will not be possible to support through this model.

- It requires every bridge driver to implement similar connector
handling code, resulting in code duplication.

- It assumes that a bridge will either be wired to a connector or to
another bridge, but doesn't support bridges that can be used in both
positions very well (although there is some ad-hoc support for this in
the analogix_dp bridge driver).

In order to solve these issues, ownership of the connector should be
moved to the display controller driver (where it can be implemented
using helpers provided by the core).

Extend the bridge API to allow disabling connector creation in bridge
drivers as a first step towards the new model. The new flags argument to
the bridge .attach() operation allows instructing the bridge driver to
skip creating a connector. Unconditionally set the new flags argument to
0 for now to keep the existing behaviour, and modify all existing bridge
drivers to return an error when connector creation is not requested as
they don't support this feature yet.

The change is based on the following semantic patch, with manual review
and edits.

@ rule1 @
identifier funcs;
identifier fn;
@@
struct drm_bridge_funcs funcs = {
...,
.attach = fn
};

@ depends on rule1 @
identifier rule1.fn;
identifier bridge;
statement S, S1;
@@
int fn(
struct drm_bridge *bridge
+ , enum drm_bridge_attach_flags flags
)
{
... when != S
+ if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
+ DRM_ERROR("Fix bridge driver to make connector optional!");
+ return -EINVAL;
+ }
+
S1
...
}

@ depends on rule1 @
identifier rule1.fn;
identifier bridge, flags;
expression E1, E2, E3;
@@
int fn(
struct drm_bridge *bridge,
enum drm_bridge_attach_flags flags
) {
<...
drm_bridge_attach(E1, E2, E3
+ , flags
)
...>
}

@@
expression E1, E2, E3;
@@
drm_bridge_attach(E1, E2, E3
+ , 0
)

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com

show more ...

drm/mediatek: fix race condition for HDMI jack status reporting

hdmi_conn_detect and mtk_hdmi_audio_hook_plugged_cb would be called
by different threads.

Imaging the following calling sequence:

drm/mediatek: fix race condition for HDMI jack status reporting

hdmi_conn_detect and mtk_hdmi_audio_hook_plugged_cb would be called
by different threads.

Imaging the following calling sequence:
Thread A Thread B
--------------------------------------------------------------------
mtk_hdmi_audio_hook_plugged_cb()
mtk_cec_hpd_high() -> disconnected
hdmi_conn_detect()
mtk_cec_hpd_high() -> connected
plugged_cb(connected)
plugged_cb(disconnected)

The latest disconnected is false reported. Makes mtk_cec_hpd_high
and plugged_cb atomic to fix.

Also uses the same lock to protect read/write of plugged_cb and codec_dev.

Fixes: 5d3c64477392 ("drm/mediatek: support HDMI jack status reporting")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Link: https://lore.kernel.org/r/20200217105513.2.I477092c2f104fd589133436c3ae4590e6fc6323b@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...